1 GNU tar NEWS - User visible changes.
2 Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
3 Free Software Foundation, Inc.
4 See the end for copying conditions.
6 Please send GNU tar bug reports to <bug-tar@gnu.org>
8 version 1.14.91 - Sergey Poznyakoff, <DATE>
10 * It is no longer necessary to specify -Z,-z, or -j options to
11 read compressed archives. GNU tar automatically detects the type
12 of archive it has to deal with and runs an appropriate decompressing
13 command. Thus, you can now run `tar tf archive.tar.gz'.
15 * When restoring incremental dumps, --one-file-system option
16 prevents directory hierarchies residing on different devices
19 With the previous versions of tar it was dangerous to create
20 incremental dumps with --one-file-system option, since they
21 would recursively remove mount points when restoring from the
22 back up. This change fixes the bug.
24 * Renamed --strip-path to --strip-components for consistency with
27 * Skipping archive members is sped up if the archive media supports
30 * Restore script starts restoring only if it is given --all (-a) option,
31 or some patterns. This is to prevent accidental restores.
33 * `tar --verify' prints a warning if during archive creation some of
34 the file names had their prefixes stripped off.
36 * New option --exclude-caches instructs tar to exclude cache directories
37 automatically on archive creation. Cache directories are those
38 containing a standardized tag file, as specified at:
40 http://www.brynosaurus.com/cachedir/spec.html
42 * New configure option --with-rmt allows to specify full path name to
43 the `rmt' utility. This supercedes DEFAULT_RMT_COMMAND variable
44 introduced in version 1.14
46 * New configure variable DEFAULT_RMT_DIR allows to specify the directory
47 where to install `rmt' utility. This is necessary since modifying
48 --libexecdir as was suggested for version 1.14 produced a side effect: it
49 also modified installation prefix for backup scripts (if
50 --enable-backup-scripts was given).
53 ** Fixed flow in recognizing files to be included in incremental dumps.
54 ** Correctly recognize sparse archive members when used with -T option.
55 ** GNU multivolume headers cannot store filenames longer than 100 characters.
56 Do not allow multivolume archives to begin with such filenames.
57 ** If a member with link count > 2 was stored in the archive twice,
58 previous versions of tar were not able to extract it, since they
59 were trying to link the file to itself, which always failed and
60 lead to removing the already extracted copy. Preserve the first
61 extracted copy in such cases.
62 ** Restore script was passing improper argument to tar --listed option.
63 ** Fixed verification of the created archives.
64 ** Fixed unquoting of the file names containing backslash escapes (previous
65 versions failed to recognize \a and \v).
68 version 1.14 - Sergey Poznyakoff, 2004-05-11
70 * Added support for POSIX.1-2001 and ustar archive formats.
71 * New option --format allows to select the output archive format
72 * The default output format can be selected at configuration time
73 by presetting the environment variable DEFAULT_ARCHIVE_FORMAT.
74 Allowed values are GNU, V7, OLDGNU and POSIX.
75 * New option --strip-path allows to cut off a given number of
76 path elements from the name of the file being extracted.
78 * New options --index-file, --no-overwrite-dir. The --overwrite-dir
79 option is now the default; use --no-overwrite-dir if you prefer
80 the previous default behavior.
82 * The semantics of -o option is changed. When extracting, it
83 does the same as --no-same-owner GNU tar option. This is compatible
84 with UNIX98 tar. Otherwise, its effect is the same as that of
85 --old-archive option. This latter is deprecated and will be removed
88 * New option --check-links prints a message if not all links are dumped
89 for a file being archived. This corresponds to the UNIX98 -l option.
90 The current semantics of the -l option is retained for compatibility
91 with previous releases, however such usage is strongly deprecated as
92 the option will change to its UNIX98 semantics in the future releases.
94 * New option --occurrence[=N] can be used in conjunction with one of
95 the subcommands --delete, --diff, --extract or --list when a list of
96 files is given either on the command line or via -T option. This
97 option instructs tar to process only the Nth occurrence of each named
98 file. N defaults to 1, so `tar -x -f archive --occurrence filename'
99 extracts the first occurrence of `filename' from `archive'
100 and terminates without scanning to the end of the archive.
102 * New option --pax-option allows to control the handling of POSIX
103 keywords in `pax' extended headers. It is equivalent to `pax'
106 * --incremental and --listed-incremental options work correctly on
107 individual files, as well as on directories.
109 * New scripts: backup (replaces old level-0 and level-1) and restore.
110 The scripts are compiled and installed if --enable-backup-scripts
111 option is given to configure.
113 * By default tar searches "rmt" utility in "$prefix/libexec/rmt",
114 which is consistent with the location where the version of "rmt"
115 included in the package is installed. Previous versions of tar
116 used "/etc/rmt". To install "rmt" to its traditional location,
117 run configure with option --libexecdir=/etc. Otherwise, if you
118 already have rmt installed and wish to use it, instead of the
119 shipped in version, set the variable DEFAULT_RMT_COMMAND to
120 the full path name of the utility, e.g. ./configure
121 DEFAULT_RMT_COMMAND=/etc/rmt.
123 Notice also that the full path name of the "rmt" utility to
124 use can be set at runtime, by giving option --rmt-command to
127 * Removed obsolete command line options:
128 ** --absolute-paths superseded by --absolute-names
129 ** --block-compress is not needed any longer
130 ** --block-size superseded by --blocking-factor
131 ** --modification-time superseded by --touch
132 ** --read-full-blocks superseded by --read-full-records
133 ** --record-number superseded by --block-number
134 ** --version-control superseded by --backup
136 * New message translations fi (Finnish), gl (Galician), hr (Croatian),
137 hu (Hungarian), ms (Malaysian), nb (Norwegian), ro (Romanian), sk
138 (Slovak), zh_CN (Chinese simplified), zh_TW (Chinese traditional).
139 The code 'no' for Norwegian (Bokmål) has been withdrawn; use 'nb' instead.
144 version 1.13.25 - Paul Eggert, 2001-09-26
149 version 1.13.24 - Paul Eggert, 2001-09-22
151 * New option --overwrite-dir.
152 * Fixes for buffer overrun, porting, and copyright notice problems.
153 * The message translations for Korean are available again.
156 version 1.13.23 - Paul Eggert, 2001-09-13
158 * Bug, porting, and copyright notice fixes.
161 version 1.13.22 - Paul Eggert, 2001-08-29
166 version 1.13.21 - Paul Eggert, 2001-08-28
168 * Porting and copyright notice fixes.
171 version 1.13.20 - Paul Eggert, 2001-08-27
173 * Some bugs were fixed:
175 - hard links to symbolic links
177 * New option --recursion (the default) that is the inverse of --no-recursion.
179 * New options --anchored, --ignore-case, --wildcards,
180 --wildcards-match-slash, and their negations (e.g., --no-anchored).
181 Along with --recursion and --no-recursion, these options control how
182 exclude patterns are interpreted.
184 * The default interpretation of exclude patterns is now --no-anchored
185 --no-ignore-case --recursion --wildcards --wildcards-match-slash.
186 This is a quiet change to the semantics of --exclude. The previous
187 semantics were a failed attempt at backward compatibility but it
188 became clear that the semantics were puzzling and did not satisfy
189 everybody. Rather than continue to try to revive that dead horse we
190 thought it better to substitute cleaner semantics, with options so
191 that you can change the behavior more to your liking.
193 * New message translations for Indonesian and Turkish.
194 The translation for Korean has been withdrawn due to encoding errors.
195 It will be reissued once those are fixed.
198 version 1.13.19 - Paul Eggert, 2001-01-13
200 * The -I option has been withdrawn, as it was buggy and confusing.
201 Eventually it is planned to be reintroduced, with the same meaning as -T.
203 * With an option like -N DATE, if DATE starts with "/" or ".", it is taken
204 to be a file name; the last-modified time of that file is used as the date.
207 version 1.13.18 - Paul Eggert, 2000-10-29
209 * Some security problems have been fixed. `tar -x' now modifies only
210 files under the working directory, unless you also specify an unsafe
211 option like --absolute-names or --overwrite.
213 * The short name of the --bzip option has been changed to -j,
214 and -I is now an alias for -T, for compatibility with Solaris tar.
216 * The manual is now distributed under the GNU Free Documentation License.
218 * The new environment variable TAR_OPTIONS holds default command-line options.
220 * The --no-recursion option now affects extraction too.
222 * The wording in some diagnostics has been changed slightly.
224 * Snapshot files now record whether each file was accessed via NFS.
225 The new file format is upward- and downward-compatible with the old.
227 * New language supported: da.
229 * Compilation by traditional (K&R) C compilers is no longer supported.
230 If you still use such a compiler, please use GCC instead.
232 * This version of tar works best with GNU gzip test version 1.3 or later.
233 Please see <ftp://alpha.gnu.org/gnu/gzip/>.
235 * `tar --delete -f -' now works again.
238 version 1.13.17 - Paul Eggert, 2000-01-07.
240 * `tar --delete -f -' is no longer allowed; it was too buggy.
241 * Diagnostic messages have been made more regular and consistent.
244 version 1.13.16 - Paul Eggert, 1999-12-13.
246 * By default, tar now refuses to overwrite an existing file when
247 extracting files from an archive; instead, it removes the file
248 before extracting it. If the existing file is a symbolic link, the
249 link is removed and not the pointed-to file. There is one
250 exception: existing nonempty directories are not removed, nor are
251 their ownerships or permissions extracted. This fixes some
252 longstanding security problems.
254 The new --overwrite option enables the old default behavior.
256 For regular files, tar implements this change by using the O_EXCL
257 option of `open' to ensure that it creates the file; if this fails, it
258 removes the file and tries again. This is similar to the behavior of
259 the --unlink-first option, but it is faster in the common case of
260 extracting a new directory.
262 * By default, tar now ignores file names containing a component of `..'
263 when extracting, and warns about such file names when creating an archive.
264 To enable the old behavior, use the -P or --absolute-names option.
266 * Tar now handles file names with multibyte encodings (e.g. UTF-8, Shift-JIS)
267 correctly. It relies on the mbrtowc function to handle multibyte characters.
269 * The file generated by -g or --listed-incremental now uses a format
270 that is independent of locale, so that users need not worry about
271 locale when restoring a backup. This is needed for proper support
272 of multibyte characters. Old-format files can still be read, and
273 older versions of GNU tar can read new-format files, unless member
274 names have multibyte chars.
276 * Many diagnostics have been changed slightly, so that file names are
277 now output unambiguously. File names in diagnostics now are either
278 `quoted like this' (in the default C locale) or are followed by
279 colon, newline, or space, depending on context. Unprintable
280 characters are escaped with a C-like backslash conventions.
281 Terminating characters (e.g. close-quote, colon, newline)
282 are also escaped as needed.
284 * tar now ignores socket files when creating an archive.
285 Previously tar archived sockets as fifos, which caused problems.
288 version 1.13.15 - Paul Eggert, 1999-12-03.
290 * If a file's ctime changes when being archived, report an error.
291 Previously tar looked at mtime, which missed some errors.
294 version 1.13.14 - Paul Eggert, 1999-11-07.
296 * New translations ja, pt_BR.
297 * New options --help and --version for rmt.
298 * Ignore Solaris door files when creating an archive.
301 version 1.13.13 - Paul Eggert, 1999-10-11.
303 * Invalid headers in tar files now elicit errors, not just warnings.
304 * `tar --version' output conforms to the latest GNU coding standards.
305 * If you specify an invalid date, `tar' now substitutes (time_t) -1.
306 * `configure --with-dmalloc' is no longer available.
309 version 1.13.12 - Paul Eggert, 1999-09-24.
311 * `tar' now supports hard links to symbolic links.
313 * New options --no-same-owner, --no-same-permissions.
315 * --total now also outputs a human-readable size, and a throughput value.
317 * `tar' now uses two's-complement base-256 when outputting header
318 values that are out of the range of the standard unsigned base-8
319 format. This affects archive members with negative or huge time
320 stamps or uids, and archive members 8 GB or larger. The new tar
321 archives cannot be read by traditional tar, or by older versions of
322 GNU tar. Use the --old-archive option to revert to the old
323 behavior, which uses unportable representations for negative values,
324 and which rejects large files.
326 * On 32-bit hosts, `tar' now assumes that an incoming time stamp T in
327 the range 2**31 <= T < 2**32 represents the negative time (T -
328 2**32). This behavior is nonstandard and is not portable to 64-bit
329 time_t hosts, so `tar' issues a warning.
331 * `tar' no longer gives up extracting immediately upon discovering
332 that an archive contains garbage at the end. It attempts to extract
333 as many files as possible from the good data before the garbage.
335 * A read error now causes a nonzero exit status, not just a warning.
337 * Some diagnostics have been reworded for consistency.
340 version 1.13.11 - Paul Eggert, 1999-08-23.
342 * The short name of the --bzip option has been changed to -I,
343 for compatibility with paxutils.
345 * -T /dev/null now matches nothing; previously, it matched anything
346 if no explicit operands were given.
348 * The `--' option now works the same as with other GNU utilities;
349 it causes later operands to be interpreted as file names, not options,
350 even if they begin with `-'.
352 * For the --newer and --after-date options, the table of time zone
353 abbreviations like `EST' has been updated to match current practice.
354 Also, local time abbreviations are now recognized, even if they are
355 not in tar's hardwired table. Remember, though, that you should use
356 numeric UTC offsets like `-0500' instead of abbreviations like
357 `EST', as abbreviations are not standardized and are ambiguous.
360 version 1.13.10 - Paul Eggert, 1999-08-20.
362 * `tar' now uses signed base-64 when outputting header values that are
363 out of the range of the standard unsigned base-8 format. [This
364 change was superseded in 1.13.12, described above.]
367 version 1.13.9 - Paul Eggert, 1999-08-18.
369 * `tar' now writes two zero blocks at end-of-archive instead of just one.
370 POSIX.1 requires this, and some other `tar' implementations check for it.
372 * `tar' no longer silently accepts a block containing nonzero checksum bytes
375 * `tar' now reads buggy tar files that have a null byte at the start of a
376 numeric header field.
379 version 1.13.8 - Paul Eggert, 1999-08-16.
381 * For compatibility with traditional `tar', intermediate directories
382 created automatically by root are no longer given the uid and gid of
383 the original file or directory.
386 version 1.13.7 - Paul Eggert, 1999-08-14.
388 * --listed-incremental and --newer are now incompatible options.
390 * When creating an archive, leading `./' is no longer stripped,
391 to match traditional tar's behavior (and simplify the documentation).
393 * --diff without --absolute-names no longer falls back on absolute names.
396 version 1.13.6 - Paul Eggert, 1999-08-11.
398 * An --exclude pattern containing / now excludes a file only if it matches an
399 initial prefix of the file name; a pattern without / continues to
400 exclude a file if it matches any file name component.
402 * The protocol for talking to rmt has been extended slightly.
403 Open flags are now communicated in symbolic format as well as numeric.
404 The symbolic format (e.g. "O_WRONLY|O_CREAT|O_TRUNC") is for portability
405 when rmt is operating on a different operating system from tar.
406 The numeric format is retained, and rmt uses it if symbolic format is absent,
407 for backward compatibility with older versions of tar and rmt.
409 * When writing GNU tar format headers, tar now uses signed base-64
410 for values that cannot be represented in unsigned octal.
411 This supports larger files (2**66 - 1 bytes instead of 2**33 - 1 bytes),
412 larger uids, negative time stamps, etc.
414 * When extracting files with unknown ownership, tar now looks up the
415 uid and gid "nobody" on hosts whose headers do not define UID_NOBODY
416 and GID_NOBODY, and falls back on uid/gid -2 if there is no "nobody".
418 * tar -t --numeric-owner now prints numeric uids and gids, not symbolic.
420 * New option -y or --bzip2 for bzip2 compression, by popular request.
423 version 1.13.5 - Paul Eggert, 1999-07-20.
425 * Do the delayed updates of file metadata even after a fatal error.
428 version 1.13.4 - Paul Eggert, 1999-07-20.
430 * Do not chmod unless we are root or the -p option was given;
431 this matches historical practice.
434 version 1.13.3 - Paul Eggert, 1999-07-16.
436 * A path name is excluded if any of its file name components matches an
437 excluded pattern, even if the path name was specified on the command line.
438 Also see 1.13.6 for later changes in this area.
441 version 1.13.2 - Paul Eggert, 1999-07-14.
443 * Bug reporting address changed to <bug-tar@gnu.org>.
446 version 1.13.1 - Paul Eggert, 1999-07-12.
450 version 1.13 - Paul Eggert, 1999-07-08.
452 * Support for large files, e.g. files larger than 2 GB on many 32-bit hosts.
453 Also, support for larger uids, device ids, etc.
454 * Many bug fixes and porting fixes.
455 * This release is only for fixes. A more ambitious test release,
456 with new features, is available as part of the paxutils. Please see:
457 ftp://alpha.gnu.org/gnu/paxutils/
458 The fixes in this release are intended to be merged with paxutils
459 at some point, but they haven't been merged yet.
460 * An interim GNU tar alpha had new --bzip2 and --ending-file options,
461 but they have been removed to maintain compatibility with paxutils.
462 Please try --use=bzip2 instead of --bzip2.
464 Version 1.12 - François Pinard, 1997-04.
467 * Use shell globbing patterns for --label, instead of regular expressions.
468 * Do not quote anymore internally over the quoting done by the shell.
471 * Offer internationalization capabilities of most recent GNU gettext.
472 * Messages available in many more languages, thanks to all translators!
473 * Usage of ISO 8601 dates in listings, instead of local American dates.
474 * More normalization and cleanup in error messages.
477 * For helping using tar with find, offer a --no-recursion option.
478 * Implement --numeric-owner for ignoring symbolic names at create time.
479 * New --owner, --group --mode options, still preliminary.
480 * Recognize creating an archive on /dev/null, so Amanda works faster.
481 * Object to the creation of an empty archive (like in `tar cf FILE').
482 * Barely start implementing --posix and POSIXLY_CORRECT.
485 * Make a better job at restoring file and directory attributes.
486 * Automatically attempt deleting existing files when in the way.
487 * Option --unlink-first (-U) removes most files prior to extraction.
488 * Option --recursive-unlink removes non-empty directories when in the way.
489 * Option --numeric-owner ignores owner/group names, it uses UID/GID instead.
490 * Use global umask when creating missing intermediate directories.
491 * When symlinks are not available, extract symbolic links as hard links.
492 * Diagnose extraction of contiguous files as regular files.
493 * New --backup, --suffix and --version-control options.
496 * Better support of huge archives with --tape-length and --totals.
497 * Rename option --read-full-blocks (-B) to --read-full-records (-B).
498 * Rename option --block-size (-b) to --blocking-factor (-b).
499 * Rename option --record-number (-R) to --block-number (-R).
500 * With --block-number (-R), report null blocks and end of file.
501 * Implement --record-size for introducing a size in bytes.
502 * Delete --block-compress option and rather decide it automatically.
503 * Rename option --modification-time to --touch.
505 Many bugs are squashed, while others still run free.
507 Version 1.11.8 - François Pinard, 1995-06.
509 * Messages available in French, German, Portuguese and Swedish.
510 * The distribution provides a rudimentary Texinfo manual.
511 * The device defaults to stdin/stdout, unless overridden by the installer.
512 * Option --sparse (-S) should work on more systems.
513 * Option --rsh-command may select an alternative remote shell program.
515 Most changes are internal, and should yield better portability.
517 Version 1.11.2 - Michael Bushnell, 1993-03.
519 * Changes in backup scripts: cleaned up considerably; notices error
520 conditions better over rsh; DUMP_REMIND_SCRIPT is now an option in
521 backup-specs; new file dump-remind is an example of a
524 * Superfluous "Reading dirname" was a bug; fixed.
526 * Incompatibility problems with a bug on Solaris are fixed.
528 * New option --gzip (aliases are --ungzip and -z); calls gzip instead
529 of compress. Also, --use-compress-program lets you specify any
530 compress program. --compress-block is renamed --block-compress and
531 now requires one of the three compression options to be specified.
533 * Several error messages are cleaned up.
535 * Directory owners are now set properly when running as root.
537 * Provide DUMP_REMIND_SCRIPT in backup-specs as a possible option
540 * Behave better with broken rmt servers.
542 * Dump scripts no longer use --atime-preserve; this causes a nasty probem.
544 * Several Makefile cleanups.
546 Version 1.11.1 - Michael Bushnell, 1992-09.
550 Version 1.11 - Michael Bushnell, 1992-09.
551 Version 1.10.16 - 1992-07.
552 Version 1.10.15 - 1992-06.
553 Version 1.10.14 - 1992-05.
554 Version 1.10.13 - 1992-01.
558 * Now uses GNU standard configure, generated by Autoconf.
560 * Long options now use `--'; use of `+' is deprecated and support
561 for it will eventually be removed.
563 * New option --null causes filenames read by -T to be
564 null-terminated, and causes -C to be ignored.
566 * New option --remove-files deletes files (but not directories)
567 after they are added to the archive.
569 * New option --ignore-failed-read prevents read-errors from affecting
572 * New option --checkpoint prints occasional messages as the tape
573 is being read or written.
575 * New option --show-omitted-dirs prints the names of directories
576 omitted from the archive.
578 * Some tape drives which use a non-standard method of indicating
579 end-of-tape now work correctly with multi-tape archives.
581 * --volno-file: Read the volume number used in prompting the user
582 (but not in recording volume ID's on the archive) from a file.
584 * When using --multi-volume, you can now give multiple -f arguments;
585 the various tape drives will get used in sequence and then wrap
586 around to the beginning.
588 * Remote archive names no longer have to be in /dev: any file with a
589 `:' is interpreted as remote. If new option --force-local is given,
590 then even archive files with a `:' are considered local.
592 * New option --atime-preserve restores (if possible) atimes to
593 their original values after dumping the file.
595 * No longer does tar confusingly dump "." when you don't tell it
598 * When extracting directories, tar now correctly restores their
599 modification and access times.
601 * Longnames support is redone differently--long name info directly
602 precedes the long-named file or link in the archive, so you no
603 longer have to wait for the extract to hit the end of the tape for
606 Version 1.10 - Michael Bushnell, 1991-07.
608 * Filename to -G is optional. -C works right. Names +newer and
609 +newer-mtime work right.
611 * -g is now +incremental, -G is now +listed-incremental.
613 * Sparse files now work correctly.
615 * +volume is now called +label.
617 * +exclude now takes a filename argument, and +exclude-from does
618 what +exclude used to do.
620 * Exit status is now correct.
622 * +totals keeps track of total I/O and prints it when tar exits.
624 * When using +label with +extract, the label is now a regexp.
626 * New option +tape-length (-L) does multi-volume handling like BSD
627 dump: you tell tar how big the tape is and it will prompt at that
628 point instead of waiting for a write error.
630 * New backup scripts level-0 and level-1 which might be useful
631 to people. They use a file "backup-specs" for information, and
632 shouldn't need local modification. These are what we use to do
633 all our backups at the FSF.
635 Version 1.09 - Jay Fenlason, 1990-10.
636 Version 1.08 - Jay Fenlason, 1990-01.
637 Versions 1.07 back to 1.00 by Jay Fenlason.
639 * See ChangeLog for more details.
643 Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2003
644 Free Software Foundation, Inc.
646 This file is part of GNU tar.
648 GNU tar is free software; you can redistribute it and/or modify
649 it under the terms of the GNU General Public License as published by
650 the Free Software Foundation; either version 2, or (at your option)
653 GNU tar is distributed in the hope that it will be useful,
654 but WITHOUT ANY WARRANTY; without even the implied warranty of
655 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
656 GNU General Public License for more details.
658 You should have received a copy of the GNU General Public License
659 along with tar; see the file COPYING. If not, write to
660 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
661 Boston, MA 02111-1307, USA.
665 paragraph-separate: "[
\f]*$"