+@node quoting styles
+@section Quoting Member Names
+
+When displaying member names, @command{tar} takes care to avoid
+ambiguities caused by certain characters. This is called @dfn{name
+quoting}. The characters in question are:
+
+@itemize @bullet
+@item Non-printable control characters:
+
+@multitable @columnfractions 0.20 0.10 0.60
+@headitem Character @tab ASCII @tab Character name
+@item \a @tab 7 @tab Audible bell
+@item \b @tab 8 @tab Backspace
+@item \f @tab 12 @tab Form feed
+@item \n @tab 10 @tab New line
+@item \r @tab 13 @tab Carriage return
+@item \t @tab 9 @tab Horizontal tabulation
+@item \v @tab 11 @tab Vertical tabulation
+@end multitable
+
+@item Space (ASCII 32)
+
+@item Single and double quotes (@samp{'} and @samp{"})
+
+@item Backslash (@samp{\})
+@end itemize
+
+The exact way @command{tar} uses to quote these characters depends on
+the @dfn{quoting style}. The default quoting style, called
+@dfn{escape} (see below), uses backslash notation to represent control
+characters, space and backslash. Using this quoting style, control
+characters are represented as listed in column @samp{Character} in the
+above table, a space is printed as @samp{\ } and a backslash as @samp{\\}.
+
+@GNUTAR{} offers seven distinct quoting styles, which can be selected
+using @option{--quoting-style} option:
+
+@table @option
+@item --quoting-style=@var{style}
+@opindex quoting-style
+
+Sets quoting style. Valid values for @var{style} argument are:
+literal, shell, shell-always, c, escape, locale, clocale.
+@end table
+
+These styles are described in detail below. To illustrate their
+effect, we will use an imaginary tar archive @file{arch.tar}
+containing the following members:
+
+@smallexample
+@group
+# 1. Contains horizontal tabulation character.
+a tab
+# 2. Contains newline character
+a
+newline
+# 3. Contains a space
+a space
+# 4. Contains double quotes
+a"double"quote
+# 5. Contains single quotes
+a'single'quote
+# 6. Contains a backslash character:
+a\backslash
+@end group
+@end smallexample
+
+Here is how usual @command{ls} command would have listed them, if they
+had existed in the current working directory:
+
+@smallexample
+@group
+$ @kbd{ls}
+a\ttab
+a\nnewline
+a\ space
+a"double"quote
+a'single'quote
+a\\backslash
+@end group
+@end smallexample
+
+Quoting styles:
+
+@table @samp
+@item literal
+No quoting, display each character as is:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=literal}
+./
+./a space
+./a'single'quote
+./a"double"quote
+./a\backslash
+./a tab
+./a
+newline
+@end group
+@end smallexample
+
+@item shell
+Display characters the same way Bourne shell does:
+control characters, except @samp{\t} and @samp{\n}, are printed using
+backslash escapes, @samp{\t} and @samp{\n} are printed as is, and a
+single quote is printed as @samp{\'}. If a name contains any quoted
+characters, it is enclosed in single quotes. In particular, if a name
+contains single quotes, it is printed as several single-quoted strings:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=shell}
+./
+'./a space'
+'./a'\''single'\''quote'
+'./a"double"quote'
+'./a\backslash'
+'./a tab'
+'./a
+newline'
+@end group
+@end smallexample
+
+@item shell-always
+Same as @samp{shell}, but the names are always enclosed in single
+quotes:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=shell-always}
+'./'
+'./a space'
+'./a'\''single'\''quote'
+'./a"double"quote'
+'./a\backslash'
+'./a tab'
+'./a
+newline'
+@end group
+@end smallexample
+
+@item c
+Use the notation of the C programming language. All names are
+enclosed in double quotes. Control characters are quoted using
+backslash notations, double quotes are represented as @samp{\"},
+backslash characters are represented as @samp{\\}. Single quotes and
+spaces are not quoted:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=c}
+"./"
+"./a space"
+"./a'single'quote"
+"./a\"double\"quote"
+"./a\\backslash"
+"./a\ttab"
+"./a\nnewline"
+@end group
+@end smallexample
+
+@item escape
+Control characters are printed using backslash notation, a space is
+printed as @samp{\ } and a backslash as @samp{\\}. This is the
+default quoting style, unless it was changed when configured the
+package.
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=escape}
+./
+./a space
+./a'single'quote
+./a"double"quote
+./a\\backslash
+./a\ttab
+./a\nnewline
+@end group
+@end smallexample
+
+@item locale
+Control characters, single quote and backslash are printed using
+backslash notation. All names are quoted using left and right
+quotation marks, appropriate to the current locale. If it does not
+define quotation marks, use @samp{`} as left and @samp{'} as right
+quotation marks. Any occurrences of the right quotation mark in a
+name are escaped with @samp{\}, for example:
+
+For example:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=locale}
+`./'
+`./a space'
+`./a\'single\'quote'
+`./a"double"quote'
+`./a\\backslash'
+`./a\ttab'
+`./a\nnewline'
+@end group
+@end smallexample
+
+@item clocale
+Same as @samp{locale}, but @samp{"} is used for both left and right
+quotation marks, if not provided by the currently selected locale:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=clocale}
+"./"
+"./a space"
+"./a'single'quote"
+"./a\"double\"quote"
+"./a\\backslash"
+"./a\ttab"
+"./a\nnewline"
+@end group
+@end smallexample
+@end table
+
+You can specify which characters should be quoted in addition to those
+implied by the current quoting style:
+
+@table @option
+@item --quote-chars=@var{string}
+Always quote characters from @var{string}, even if the selected
+quoting style would not quote them.
+@end table
+
+For example, using @samp{escape} quoting (compare with the usual
+escape listing above):
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=escape --quote-chars=' "'}
+./
+./a\ space
+./a'single'quote
+./a\"double\"quote
+./a\\backslash
+./a\ttab
+./a\nnewline
+@end group
+@end smallexample
+
+To disable quoting of such additional characters, use the following
+option:
+
+@table @option
+@item --no-quote-chars=@var{string}
+Remove characters listed in @var{string} from the list of quoted
+characters set by the previous @option{--quote-chars} option.
+@end table
+
+This option is particularly useful if you have added
+@option{--quote-chars} to your @env{TAR_OPTIONS} (@pxref{TAR_OPTIONS})
+and wish to disable it for the current invocation.
+
+Note, that @option{--no-quote-chars} does @emph{not} disable those
+characters that are quoted by default in the selected quoting style.
+
+@node transform
+@section Modifying File and Member Names
+
+@command{Tar} archives contain detailed information about files stored
+in them and full file names are part of that information. When
+storing file to an archive, its file name is recorded in the archive
+along with the actual file contents. When restoring from an archive,
+a file is created on disk with exactly the same name as that stored
+in the archive. In the majority of cases this is the desired behavior
+of a file archiver. However, there are some cases when it is not.
+
+First of all, it is often unsafe to extract archive members with
+absolute file names or those that begin with a @file{../}. @GNUTAR{}
+takes special precautions when extracting such names and provides a
+special option for handling them, which is described in
+@ref{absolute}.
+
+Secondly, you may wish to extract file names without some leading
+directory components, or with otherwise modified names. In other
+cases it is desirable to store files under differing names in the
+archive.
+
+@GNUTAR{} provides two options for these needs.
+
+@table @option
+@opindex strip-components
+@item --strip-components=@var{number}
+Strip given @var{number} of leading components from file names before
+extraction.
+@end table
+
+For example, suppose you have archived whole @file{/usr} hierarchy to
+a tar archive named @file{usr.tar}. Among other files, this archive
+contains @file{usr/include/stdlib.h}, which you wish to extract to
+the current working directory. To do so, you type:
+
+@smallexample
+$ @kbd{tar -xf usr.tar --strip=2 usr/include/stdlib.h}
+@end smallexample
+
+The option @option{--strip=2} instructs @command{tar} to strip the
+two leading components (@file{usr/} and @file{include/}) off the file
+name.
+
+If you add to the above invocation @option{--verbose} (@option{-v})
+option, you will note that the verbose listing still contains the
+full file name, with the two removed components still in place. This
+can be inconvenient, so @command{tar} provides a special option for
+altering this behavior:
+
+@anchor{show-transformed-names}
+@table @option
+@opindex show-transformed-names
+@item --show-transformed-names
+Display file or member names with all requested transformations
+applied.
+@end table
+
+@noindent
+For example:
+
+@smallexample
+@group
+$ @kbd{tar -xf usr.tar -v --strip=2 usr/include/stdlib.h}
+usr/include/stdlib.h
+$ @kbd{tar -xf usr.tar -v --strip=2 --show-transformed usr/include/stdlib.h}
+stdlib.h
+@end group
+@end smallexample
+
+Notice that in both cases the file is @file{stdlib.h} extracted to the
+current working directory, @option{--show-transformed-names} affects
+only the way its name is displayed.
+
+This option is especially useful for verifying whether the invocation
+will have the desired effect. Thus, before running
+
+@smallexample
+$ @kbd{tar -x --strip=@var{n}}
+@end smallexample
+
+@noindent
+it is often advisable to run
+
+@smallexample
+$ @kbd{tar -t -v --show-transformed --strip=@var{n}}
+@end smallexample
+
+@noindent
+to make sure the command will produce the intended results.
+
+In case you need to apply more complex modifications to the file name,
+@GNUTAR{} provides a general-purpose transformation option:
+
+@table @option
+@opindex transform
+@item --transform=@var{expression}
+Modify file names using supplied @var{expression}.
+@end table
+
+@noindent
+The @var{expression} is a @command{sed}-like replace expression of the
+form:
+
+@smallexample
+s/@var{regexp}/@var{replace}/[@var{flags}]
+@end smallexample
+
+@noindent
+where @var{regexp} is a @dfn{regular expression}, @var{replace} is a
+replacement for each file name part that matches @var{regexp}. Both
+@var{regexp} and @var{replace} are described in detail in
+@ref{The "s" Command, The "s" Command, The `s' Command, sed, GNU sed}.
+
+Supported @var{flags} are:
+
+@table @samp
+@item g
+Apply the replacement to @emph{all} matches to the @var{regexp}, not
+just the first.
+
+@item i
+Use case-insensitive matching
+
+@item x
+@var{regexp} is an @dfn{extended regular expression} (@pxref{Extended
+regexps, Extended regular expressions, Extended regular expressions,
+sed, GNU sed}).
+
+@item @var{number}
+Only replace the @var{number}th match of the @var{regexp}.
+
+Note: the @var{posix} standard does not specify what should happen
+when you mix the @samp{g} and @var{number} modifiers. @GNUTAR{}
+follows the GNU @command{sed} implementation in this regard, so
+the interaction is defined to be: ignore matches before the
+@var{number}th, and then match and replace all matches from the
+@var{number}th on.
+
+@end table
+
+Any delimiter can be used in lieue of @samp{/}, the only requirement being
+that it be used consistently throughout the expression. For example,
+the following two expressions are equivalent:
+
+@smallexample
+@group
+s/one/two/
+s,one,two,
+@end group
+@end smallexample
+
+Changing delimiters is often useful when the @var{regex} contains
+slashes. For example, it is more convenient to write @code{s,/,-,} than
+@code{s/\//-/}.
+
+Here are several examples of @option{--transform} usage:
+
+@enumerate
+@item Extract @file{usr/} hierarchy into @file{usr/local/}:
+
+@smallexample
+$ @kbd{tar --transform='s,usr/,usr/local/,' -x -f arch.tar}
+@end smallexample
+
+@item Strip two leading directory components (equivalent to
+@option{--strip-components=2}):
+
+@smallexample
+$ @kbd{tar --transform='s,/*[^/]*/[^/]*/,,' -x -f arch.tar}
+@end smallexample
+
+@item Prepend @file{/prefix/} to each file name:
+
+@smallexample
+$ @kbd{tar --transform 's,^,/prefix/,' -x -f arch.tar}
+@end smallexample
+
+@item Convert each file name to lower case:
+
+@smallexample
+$ @kbd{tar --transform 's/.*/\L&/' -x -f arch.tar}
+@end smallexample
+
+@end enumerate
+
+Unlike @option{--strip-components}, @option{--transform} can be used
+in any @GNUTAR{} operation mode. For example, the following command
+adds files to the archive while replacing the leading @file{usr/}
+component with @file{var/}:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,^usr/,var/,' /}
+@end smallexample
+
+To test @option{--transform} effect we suggest using
+@option{--show-transformed-names} option:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,^usr/,var/,' \
+ --verbose --show-transformed-names /}
+@end smallexample
+
+If both @option{--strip-components} and @option{--transform} are used
+together, then @option{--transform} is applied first, and the required
+number of components is then stripped from its result.
+
+@node after
+@section Operating Only on New Files
+@UNREVISED
+
+@cindex Excluding file by age
+@cindex Data Modification time, excluding files by
+@cindex Modification time, excluding files by
+@cindex Age, excluding files by
+The @option{--after-date=@var{date}} (@option{--newer=@var{date}},
+@option{-N @var{date}}) option causes @command{tar} to only work on
+files whose data modification or status change times are newer than
+the @var{date} given. If @var{date} starts with @samp{/} or @samp{.},
+it is taken to be a file name; the data modification time of that file
+is used as the date. If you use this option when creating or appending
+to an archive, the archive will only include new files. If you use
+@option{--after-date} when extracting an archive, @command{tar} will
+only extract files newer than the @var{date} you specify.
+
+If you only want @command{tar} to make the date comparison based on
+modification of the file's data (rather than status
+changes), then use the @option{--newer-mtime=@var{date}} option.
+
+You may use these options with any operation. Note that these options
+differ from the @option{--update} (@option{-u}) operation in that they
+allow you to specify a particular date against which @command{tar} can
+compare when deciding whether or not to archive the files.
+
+@table @option
+@opindex after-date
+@opindex newer
+@item --after-date=@var{date}
+@itemx --newer=@var{date}
+@itemx -N @var{date}
+Only store files newer than @var{date}.
+
+Acts on files only if their data modification or status change times are
+later than @var{date}. Use in conjunction with any operation.
+
+If @var{date} starts with @samp{/} or @samp{.}, it is taken to be a file
+name; the data modification time of that file is used as the date.
+
+@opindex newer-mtime
+@item --newer-mtime=@var{date}
+Acts like @option{--after-date}, but only looks at data modification times.
+@end table
+
+These options limit @command{tar} to operate only on files which have
+been modified after the date specified. A file's status is considered to have
+changed if its contents have been modified, or if its owner,
+permissions, and so forth, have been changed. (For more information on
+how to specify a date, see @ref{Date input formats}; remember that the
+entire date argument must be quoted if it contains any spaces.)
+
+Gurus would say that @option{--after-date} tests both the data
+modification time (@code{mtime}, the time the contents of the file
+were last modified) and the status change time (@code{ctime}, the time
+the file's status was last changed: owner, permissions, etc.@:)
+fields, while @option{--newer-mtime} tests only the @code{mtime}
+field.
+
+To be precise, @option{--after-date} checks @emph{both} @code{mtime} and
+@code{ctime} and processes the file if either one is more recent than
+@var{date}, while @option{--newer-mtime} only checks @code{mtime} and
+disregards @code{ctime}. Neither does it use @code{atime} (the last time the
+contents of the file were looked at).
+
+Date specifiers can have embedded spaces. Because of this, you may need
+to quote date arguments to keep the shell from parsing them as separate
+arguments. For example, the following command will add to the archive
+all the files modified less than two days ago:
+
+@smallexample
+$ @kbd{tar -cf foo.tar --newer-mtime '2 days ago'}
+@end smallexample
+
+When any of these options is used with the option @option{--verbose}
+(@pxref{verbose tutorial}) @GNUTAR{} will try to convert the specified
+date back to its textual representation and compare that with the
+one given with the option. If the two dates differ, @command{tar} will
+print a warning saying what date it will use. This is to help user
+ensure he is using the right date. For example:
+
+@smallexample
+@group
+$ @kbd{tar -c -f archive.tar --after-date='10 days ago' .}
+tar: Option --after-date: Treating date `10 days ago' as 2006-06-11
+13:19:37.232434
+@end group
+@end smallexample
+
+@quotation
+@strong{Please Note:} @option{--after-date} and @option{--newer-mtime}
+should not be used for incremental backups. @xref{Incremental Dumps},
+for proper way of creating incremental backups.
+@end quotation
+
+@node recurse
+@section Descending into Directories