@smallbook
@c %**end of header
+@c Maintenance notes:
+@c 1. Pay attention to @FIXME{}s and @UNREVISED{}s
+@c 2. Before creating final variant:
+@c 2.1. Run `make check-options' to make sure all options are properly
+@c documented;
+@c 2.2. Run `make master-menu' (see comment before the master menu).
+
@include rendition.texi
@include value.texi
+@defcodeindex op
+@defcodeindex kw
+
@c Put everything in one index (arbitrarily chosen to be the concept index).
@syncodeindex fn cp
@syncodeindex ky cp
@syncodeindex pg cp
@syncodeindex vr cp
-
-@defindex op
-@syncodeindex op cp
+@syncodeindex kw cp
@copying
from archives.
Copyright @copyright{} 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2001,
-2003, 2004 Free Software Foundation, Inc.
+2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with the
-Invariant Sections being "GNU General Public License", with the
-Front-Cover Texts being ``A GNU Manual,'' and with the Back-Cover Texts
-as in (a) below. A copy of the license is included in the section
-entitled "GNU Free Documentation License".
-
-(a) The FSF's Back-Cover Text is: ``You are free to copy and modify
-this GNU Manual. Buying copies from GNU Press supports the FSF in
-developing GNU and promoting software freedom.''
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover Texts being ``A GNU Manual'',
+and with the Back-Cover Texts as in (a) below. A copy of the license
+is included in the section entitled ``GNU Free Documentation
+License''.
+
+(a) The FSF's Back-Cover Text is: ``You have the freedom to
+copy and modify this GNU manual. Buying copies from the FSF
+supports it in developing GNU and promoting software freedom.''
@end quotation
@end copying
document. The rest of the menu lists all the lower level nodes.
@end ifnottex
-@c The master menu, created with texinfo-master-menu, goes here.
-@c (However, getdate.texi's menu is interpolated by hand.)
+@c The master menu goes here.
+@c
+@c NOTE: To update it from within Emacs, make sure mastermenu.el is
+@c loaded and run texinfo-master-menu.
+@c To update it from the command line, run
+@c
+@c make master-menu
@menu
* Introduction::
* Date input formats::
* Formats::
* Media::
+* Reliability and security::
Appendices
+* Changes::
+* Configuring Help Summary::
+* Fixing Snapshot Files::
+* Tar Internals::
* Genfile::
-* Snapshot Files::
* Free Software Needs Free Documentation::
-* Copying This Manual::
+* GNU Free Documentation License::
+* Index of Command Line Options::
* Index::
@detailmenu
* Definitions:: Some Definitions
* What tar Does:: What @command{tar} Does
* Naming tar Archives:: How @command{tar} Archives are Named
-* Current status:: Current development status of @GNUTAR{}
* Authors:: @GNUTAR{} Authors
* Reports:: Reporting bugs or suggestions
* extracting archives::
* extracting files::
* extract dir::
+* extracting untrusted archives::
* failing commands::
Invoking @GNUTAR{}
* Styles::
* All Options::
* help::
+* defaults::
* verbose::
+* checkpoints::
+* warnings::
* interactive::
The Three Option Styles
-* Mnemonic Options:: Mnemonic Option Style
+* Long Options:: Long Option Style
* Short Options:: Short Option Style
* Old Options:: Old Option Style
* Mixing:: Mixing Option Styles
Options Used by @option{--create}
+* override:: Overriding File Metadata.
* Ignore Failed Read::
Options Used by @option{--extract}
* Recursive Unlink::
* Data Modification Times::
* Setting Access Permissions::
+* Directory Modification Times and Permissions::
* Writing to Standard Output::
+* Writing to an External Program::
* remove files::
Coping with Scarce Resources
* Selecting Archive Members::
* files:: Reading Names from a File
* exclude:: Excluding Some Files
-* Wildcards::
+* wildcards:: Wildcards Patterns and Matching
+* quoting styles:: Ways of Quoting Special Characters in Names
+* transform:: Modifying File and Member Names
* after:: Operating Only on New Files
* recurse:: Descending into Directories
* one:: Crossing File System Boundaries
Excluding Some Files
-* controlling pattern-patching with exclude::
* problems with exclude::
+Wildcards Patterns and Matching
+
+* controlling pattern-matching::
+
Crossing File System Boundaries
* directory:: Changing Directory
* General date syntax:: Common rules.
* Calendar date items:: 19 Dec 1994.
* Time of day items:: 9:20pm.
-* Time zone items:: @sc{est}, @sc{pdt}, @sc{gmt}, ...
+* Time zone items:: @sc{est}, @sc{pdt}, @sc{gmt}.
* Day of week items:: Monday and others.
* Relative items in date strings:: next tuesday, 2 years ago.
* Pure numbers in date strings:: 19931219, 1440.
* Seconds since the Epoch:: @@1078100502.
+* Specifying time zone rules:: TZ="America/New_York", TZ="UTC0".
* Authors of get_date:: Bellovin, Eggert, Salz, Berets, et al.
Controlling the Archive Format
-* Portability:: Making @command{tar} Archives More Portable
* Compression:: Using Less Space through Compression
* Attributes:: Handling File Attributes
-* Standard:: The Standard Format
-* Extensions:: @acronym{GNU} Extensions to the Archive Format
+* Portability:: Making @command{tar} Archives More Portable
* cpio:: Comparison of @command{tar} and @command{cpio}
+Using Less Space through Compression
+
+* gzip:: Creating and Reading Compressed Archives
+* sparse:: Archiving Sparse Files
+
+Creating and Reading Compressed Archives
+
+* lbzip2:: Using lbzip2 with @GNUTAR{}.
+
Making @command{tar} Archives More Portable
* Portable Names:: Portable Names
* dereference:: Symbolic Links
+* hard links:: Hard Links
* old:: Old V7 Archives
+* ustar:: Ustar Archives
+* gnu:: GNU and old GNU format archives.
* posix:: @acronym{POSIX} archives
* Checksumming:: Checksumming Problems
* Large or Negative Values:: Large files, negative time stamps, etc.
+* Other Tars:: How to Extract GNU-Specific Data Using
+ Other @command{tar} Implementations
-Using Less Space through Compression
+@GNUTAR{} and @acronym{POSIX} @command{tar}
-* gzip:: Creating and Reading Compressed Archives
-* sparse:: Archiving Sparse Files
+* PAX keywords:: Controlling Extended Header Keywords.
+
+How to Extract GNU-Specific Data Using Other @command{tar} Implementations
+
+* Split Recovery:: Members Split Between Volumes
+* Sparse Recovery:: Sparse Members
Tapes and Other Archive Media
* Tape Files:: Tape Files
* Tarcat:: Concatenate Volumes into a Single Archive
-GNU tar internals and development
-* Genfile::
+Tar Internals
+
+* Standard:: Basic Tar Format
+* Extensions:: @acronym{GNU} Extensions to the Archive Format
+* Sparse Formats:: Storing Sparse Files
* Snapshot Files::
+* Dumpdir::
+
+Storing Sparse Files
+
+* Old GNU Format::
+* PAX 0:: PAX Format, Versions 0.0 and 0.1
+* PAX 1:: PAX Format, Version 1.0
+
+Genfile
+
+* Generate Mode:: File Generation Mode.
+* Status Mode:: File Status Mode.
+* Exec Mode:: Synchronous Execution mode.
Copying This Manual
* Definitions:: Some Definitions
* What tar Does:: What @command{tar} Does
* Naming tar Archives:: How @command{tar} Archives are Named
-* Current status:: Current development status of @GNUTAR{}
* Authors:: @GNUTAR{} Authors
* Reports:: Reporting bugs or suggestions
@end menu
The second chapter is a tutorial (@pxref{Tutorial}) which provides a
gentle introduction for people who are new to using @command{tar}. It is
-meant to be self contained, not requiring any reading from subsequent
+meant to be self-contained, not requiring any reading from subsequent
chapters to make sense. It moves from topic to topic in a logical,
progressive order, building on information already explained.
two frequently used options (@samp{file} and @samp{verbose}). The other
chapters do not refer to the tutorial frequently; however, if a section
discusses something which is a complex variant of a basic concept, there
-may be a cross reference to that basic concept. (The entire book,
+may be a cross-reference to that basic concept. (The entire book,
including the tutorial, assumes that the reader understands some basic
concepts of using a Unix-type operating system; @pxref{Tutorial}.)
The third chapter presents the remaining five operations, and
information about using @command{tar} options and option syntax.
-@FIXME{this sounds more like a @acronym{GNU} Project Manuals Concept [tm] more
-than the reality. should think about whether this makes sense to say
-here, or not.} The other chapters are meant to be used as a
-reference. Each chapter presents everything that needs to be said
-about a specific topic.
+The other chapters are meant to be used as a reference. Each chapter
+presents everything that needs to be said about a specific topic.
One of the chapters (@pxref{Date input formats}) exists in its
entirety in other @acronym{GNU} manuals, and is mostly self-contained.
direct its output to available devices, files, or other programs (using
pipes). @command{tar} may even access remote devices or files (as archives).
-@FIXME{the following table entries need a bit of work..}
-
You can use @command{tar} archives in many ways. We want to stress a few
of them: storage, backup, and transportation.
+@FIXME{the following table entries need a bit of work.}
@table @asis
@item Storage
Often, @command{tar} archives are used to store related files for
this manual, we consistently refer to ``archives'' and ``archive
members'' to make learning to use @command{tar} easier for novice users.
-@node Current status
-@section Current development status of @GNUTAR{}
-
-@GNUTAR{} is currently in the process of active development, whose
-primary aims are:
-
-@itemize @bullet
-@item Improve compatibility between @GNUTAR{} and other @command{tar}
-implementations.
-@item Switch to using @acronym{POSIX} archives.
-@item Revise sparse file handling and multiple volume processing.
-@item Merge with the @acronym{GNU} @code{paxutils} project.
-@end itemize
-
-Some of these aims are already attained, while others are still
-being worked upon. From the point of view of an end user, the
-following issues need special mentioning:
-
-@table @asis
-@item Use of short option @option{-o}.
-
-Earlier versions of @GNUTAR{} understood @option{-o} command line
-option as a synonym for @option{--old-archive}.
-
-@GNUTAR{} starting from version 1.13.90 understands this option as
-a synonym for @option{--no-same-owner}. This is compatible with
-UNIX98 @command{tar} implementations.
-
-However, to facilitate transition, @option{-o} option retains its
-old semantics when it is used with one of archive-creation commands.
-Users are encouraged to use @value{op-format-oldgnu} instead.
-
-It is especially important, since versions of @acronym{GNU} Automake
-up to and including 1.8.4 invoke tar with this option to produce
-distribution tarballs. @xref{Formats,v7}, for the detailed discussion
-of this issue and its implications.
-
-Future versions of @GNUTAR{} will understand @option{-o} only as a
-synonym for @option{--no-same-owner}.
-
-@item Use of short option @option{-l}
-
-Earlier versions of @GNUTAR{} understood @option{-l} option as a
-synonym for @option{--one-file-system}. Such usage is deprecated.
-For compatibility with other implementations future versions of
-@GNUTAR{} will understand this option as a synonym for
-@option{--check-links}.
-
-@item Use of options @option{--portability} and @option{--old-archive}
-
-These options are deprecated. Please use @option{--format=v7} instead.
-
-@item Use of option @option{--posix}
-
-This option is deprecated. Please use @option{--format=posix} instead.
-@end table
-
@node Authors
@section @GNUTAR{} Authors
Fran@,{c}ois Pinard put version 1.11.8 of the manual together by
taking information from all these sources and merging them. Melissa
Weisshaus finally edited and redesigned the book to create version
-1.12. @FIXME{update version number as necessary; i'm being
-optimistic!} @FIXME{Someone [maybe karl berry? maybe bob chassell?
-maybe melissa? maybe julie sussman?] needs to properly index the
-thing.}
+1.12. The book for versions from 1.14 up to @value{VERSION} were edited
+by the current maintainer, Sergey Poznyakoff.
For version 1.12, Daniel Hagerty contributed a great deal of technical
consulting. In particular, he is the primary author of @ref{Backups}.
When reporting a bug, please be sure to include as much detail as
possible, in order to reproduce it. @FIXME{Be more specific, I'd
like to make this node as detailed as 'Bug reporting' node in Emacs
-manual}.
+manual.}
@node Tutorial
@chapter Tutorial Introduction to @command{tar}
file system. You should have some basic understanding of directory
structure and how files are named according to which directory they are
in. You should understand concepts such as standard output and standard
-input, what various definitions of the term ``argument'' mean, and the
-differences between relative and absolute path names. @FIXME{and what
+input, what various definitions of the term @samp{argument} mean, and the
+differences between relative and absolute file names. @FIXME{and what
else?}
@item
This manual assumes that you are working from your own home directory
(unless we state otherwise). In this tutorial, you will create a
-directory to practice @command{tar} commands in. When we show path names,
-we will assume that those paths are relative to your home directory.
-For example, my home directory path is @file{/home/fsf/melissa}. All of
-my examples are in a subdirectory of the directory named by that path
+directory to practice @command{tar} commands in. When we show file names,
+we will assume that those names are relative to your home directory.
+For example, my home directory is @file{/home/fsf/melissa}. All of
+my examples are in a subdirectory of the directory named by that file
name; the subdirectory is called @file{practice}.
@item
of three forms: long (mnemonic) form, short form, and old style. Some
of the operations and options have no short or ``old'' forms; however,
the operations and options which we will cover in this tutorial have
-corresponding abbreviations. @FIXME{make sure this is still the case,
-at the end}We will indicate those abbreviations appropriately to get
-you used to seeing them. (Note that the ``old style'' option forms
-exist in @GNUTAR{} for compatibility with Unix
-@command{tar}. We present a full discussion of this way of writing
-options and operations appears in @ref{Old Options}, and we discuss
-the other two styles of writing options in @ref{Mnemonic Options}, and
-@ref{Short Options}.)
+corresponding abbreviations. We will indicate those abbreviations
+appropriately to get you used to seeing them. Note, that the ``old
+style'' option forms exist in @GNUTAR{} for compatibility with Unix
+@command{tar}. In this book we present a full discussion of this way
+of writing options and operations (@pxref{Old Options}), and we discuss
+the other two styles of writing options (@xref{Long Options}, and
+@pxref{Short Options}).
In the examples and in the text of this tutorial, we usually use the
long forms of operations and options; but the ``short'' forms produce
two different ways. People sometimes refer to @command{tar} ``commands''.
A @command{tar} @dfn{command} is the entire command line of user input
which tells @command{tar} what to do --- including the operation, options,
-and any arguments (file names, pipes, other commands, etc). However,
+and any arguments (file names, pipes, other commands, etc.). However,
you will also sometimes hear the term ``the @command{tar} command''. When
the word ``command'' is used specifically like this, a person is usually
referring to the @command{tar} @emph{operation}, not the whole line.
@unnumberedsubsec The @option{--file} Option
@table @option
+@xopindex{file, tutorial}
@item --file=@var{archive-name}
@itemx -f @var{archive-name}
Specify the name of an archive file.
@end table
-You can specify an argument for the @value{op-file} option whenever you
+You can specify an argument for the @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) option whenever you
use @command{tar}; this option determines the name of the archive file
that @command{tar} will work on.
-If you don't specify this argument, then @command{tar} will use a
-default, usually some physical tape drive attached to your machine.
-If there is no tape drive attached, or the default is not meaningful,
-then @command{tar} will print an error message. The error message might
-look roughly like one of the following:
+@vrindex TAPE
+If you don't specify this argument, then @command{tar} will examine
+the environment variable @env{TAPE}. If it is set, its value will be
+used as the archive name. Otherwise, @command{tar} will use the
+default archive, determined at compile time. Usually it is
+standard output or some physical tape drive attached to your machine
+(you can verify what the default is by running @kbd{tar
+--show-defaults}, @pxref{defaults}). If there is no tape drive
+attached, or the default is not meaningful, then @command{tar} will
+print an error message. The error message might look roughly like one
+of the following:
@smallexample
tar: can't open /dev/rmt8 : No such device or address
@noindent
To avoid confusion, we recommend that you always specify an archive file
-name by using @value{op-file} when writing your @command{tar} commands.
-For more information on using the @value{op-file} option, see
+name by using @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) when writing your @command{tar} commands.
+For more information on using the @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) option, see
@ref{file}.
@node verbose tutorial
@unnumberedsubsec The @option{--verbose} Option
@table @option
+@xopindex{verbose, introduced}
@item --verbose
@itemx -v
Show the files being worked on as @command{tar} is running.
@end table
-@value{op-verbose} shows details about the results of running
+@option{--verbose} (@option{-v}) shows details about the results of running
@command{tar}. This can be especially useful when the results might not be
obvious. For example, if you want to see the progress of @command{tar} as
it writes files into the archive, you can use the @option{--verbose}
clear, and we will give many examples both using and not using
@option{--verbose} to show the differences.
-Sometimes, a single instance of @option{--verbose} on the command line
-will show a full, @samp{ls} style listing of an archive or files,
-giving sizes, owners, and similar information. @FIXME{Describe the
-exact output format, e.g., how hard links are displayed.}
-Other times, @option{--verbose} will only show files or members that the particular
-operation is operating on at the time. In the latter case, you can
-use @option{--verbose} twice in a command to get a listing such as that
-in the former case. For example, instead of saying
+Each instance of @option{--verbose} on the command line increases the
+verbosity level by one, so if you need more details on the output,
+specify it twice.
+
+When reading archives (@option{--list}, @option{--extract},
+@option{--diff}), @command{tar} by default prints only the names of
+the members being extracted. Using @option{--verbose} will show a full,
+@command{ls} style member listing.
+
+In contrast, when writing archives (@option{--create}, @option{--append},
+@option{--update}), @command{tar} does not print file names by
+default. So, a single @option{--verbose} option shows the file names
+being added to the archive, while two @option{--verbose} options
+enable the full listing.
+
+For example, to create an archive in verbose mode:
@smallexample
-@kbd{tar -cvf afiles.tar apple angst aspic}
+$ @kbd{tar -cvf afiles.tar apple angst aspic}
+apple
+angst
+aspic
@end smallexample
@noindent
-above, you might say
+Creating the same archive with the verbosity level 2 could give:
@smallexample
-@kbd{tar -cvvf afiles.tar apple angst aspic}
+$ @kbd{tar -cvvf afiles.tar apple angst aspic}
+-rw-r--r-- gray/staff 62373 2006-06-09 12:06 apple
+-rw-r--r-- gray/staff 11481 2006-06-09 12:06 angst
+-rw-r--r-- gray/staff 23152 2006-06-09 12:06 aspic
@end smallexample
@noindent
Later in the tutorial, we will give examples using @w{@option{--verbose
--verbose}}.
+@anchor{verbose member listing}
+The full output consists of six fields:
+
+@itemize @bullet
+@item File type and permissions in symbolic form.
+These are displayed in the same format as the first column of
+@command{ls -l} output (@pxref{What information is listed,
+format=verbose, Verbose listing, fileutils, GNU file utilities}).
+
+@item Owner name and group separated by a slash character.
+If these data are not available (for example, when listing a @samp{v7} format
+archive), numeric @acronym{ID} values are printed instead.
+
+@item Size of the file, in bytes.
+
+@item File modification date in ISO 8601 format.
+
+@item File modification time.
+
+@item File name.
+If the name contains any special characters (white space, newlines,
+etc.) these are displayed in an unambiguous form using so called
+@dfn{quoting style}. For the detailed discussion of available styles
+and on how to use them, see @ref{quoting styles}.
+
+Depending on the file type, the name can be followed by some
+additional information, described in the following table:
+
+@table @samp
+@item -> @var{link-name}
+The file or archive member is a @dfn{symbolic link} and
+@var{link-name} is the name of file it links to.
+
+@item link to @var{link-name}
+The file or archive member is a @dfn{hard link} and @var{link-name} is
+the name of file it links to.
+
+@item --Long Link--
+The archive member is an old GNU format long link. You will normally
+not encounter this.
+
+@item --Long Name--
+The archive member is an old GNU format long name. You will normally
+not encounter this.
+
+@item --Volume Header--
+The archive member is a GNU @dfn{volume header} (@pxref{Tape Files}).
+
+@item --Continued at byte @var{n}--
+Encountered only at the beginning of a multi-volume archive
+(@pxref{Using Multiple Tapes}). This archive member is a continuation
+from the previous volume. The number @var{n} gives the offset where
+the original file was split.
+
+@item unknown file type @var{c}
+An archive member of unknown type. @var{c} is the type character from
+the archive header. If you encounter such a message, it means that
+either your archive contains proprietary member types @GNUTAR{} is not
+able to handle, or the archive is corrupted.
+@end table
+
+@end itemize
+
+For example, here is an archive listing containing most of the special
+suffixes explained above:
+
+@smallexample
+@group
+V--------- 0/0 1536 2006-06-09 13:07 MyVolume--Volume Header--
+-rw-r--r-- gray/staff 456783 2006-06-09 12:06 aspic--Continued at
+byte 32456--
+-rw-r--r-- gray/staff 62373 2006-06-09 12:06 apple
+lrwxrwxrwx gray/staff 0 2006-06-09 13:01 angst -> apple
+-rw-r--r-- gray/staff 35793 2006-06-09 12:06 blues
+hrw-r--r-- gray/staff 0 2006-06-09 12:06 music link to blues
+@end group
+@end smallexample
+
+@smallexample
+@end smallexample
+
@node help tutorial
@unnumberedsubsec Getting Help: Using the @option{--help} Option
@table @option
+@opindex help
@item --help
The @option{--help} option to @command{tar} prints out a very brief list of
@section How to Create Archives
@UNREVISED
-One of the basic operations of @command{tar} is @value{op-create}, which
+@cindex Creation of the archive
+@cindex Archive, creation of
+One of the basic operations of @command{tar} is @option{--create} (@option{-c}), which
you use to create a @command{tar} archive. We will explain
@option{--create} first because, in order to learn about the other
operations, you will find it useful to have an archive available to
Now @command{cd} to the directory named @file{practice}; @file{practice}
is now your @dfn{working directory}. (@emph{Please note}: Although
-the full path name of this directory is
+the full file name of this directory is
@file{/@var{homedir}/practice}, in our examples we will refer to
-this directory as @file{practice}; the @var{homedir} is presumed.
+this directory as @file{practice}; the @var{homedir} is presumed.)
In general, you should check that the files to be archived exist where
you think they do (in the working directory) by running @command{ls}.
working directory with the archive name you intend to use (in this case,
@samp{collection.tar}), or that you don't care about its contents.
Whenever you use @samp{create}, @command{tar} will erase the current
-contents of the file named by @value{op-file} if it exists. @command{tar}
+contents of the file named by @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) if it exists. @command{tar}
will not tell you if you are about to overwrite an archive unless you
-specify an option which does this. @FIXME{xref to the node for
---backup!}To add files to an existing archive, you need to use a
-different option, such as @value{op-append}; see @ref{append} for
-information on how to do this.
+specify an option which does this (@pxref{backup}, for the
+information on how to do so). To add files to an existing archive,
+you need to use a different option, such as @option{--append} (@option{-r}); see
+@ref{append} for information on how to do this.
@node Creating the archive
@subsection Creating the Archive
+@xopindex{create, introduced}
To place the files @file{blues}, @file{folk}, and @file{jazz} into an
archive named @file{collection.tar}, use the following command:
easiest to understand (and we encourage you to do the same when you use
@command{tar}, to avoid errors).
-Note that the part of the command which says,
-@w{@option{--file=collection.tar}} is considered to be @emph{one} argument.
+Note that the sequence
+@option{--file=@-collection.tar} is considered to be @emph{one} argument.
If you substituted any other string of characters for
@kbd{collection.tar}, then that string would become the name of the
archive file you create.
(@file{collection.tar}), and @option{--file} is the option which lets
you give it the name you chose. The files, @file{blues}, @file{folk},
and @file{jazz}, are now members of the archive, @file{collection.tar}
-(they are @dfn{file name arguments} to the @option{--create} operation).
-@FIXME{xref here to the discussion of file name args?}Now that they are
+(they are @dfn{file name arguments} to the @option{--create} operation.
+@xref{Choosing}, for the detailed discussion on these.) Now that they are
in the archive, they are called @emph{archive members}, not files.
(@pxref{Definitions,members}).
will complain. You must have write access to the working directory,
or else you will not be able to create an archive in that directory.
-@emph{Caution}: Do not attempt to use @value{op-create} to add files to
+@emph{Caution}: Do not attempt to use @option{--create} (@option{-c}) to add files to
an existing archive; it will delete the archive and write a new one.
-Use @value{op-append} instead. @xref{append}.
+Use @option{--append} (@option{-r}) instead. @xref{append}.
@node create verbose
@subsection Running @option{--create} with @option{--verbose}
-If you include the @value{op-verbose} option on the command line,
+@xopindex{create, using with @option{--verbose}}
+@xopindex{verbose, using with @option{--create}}
+If you include the @option{--verbose} (@option{-v}) option on the command line,
@command{tar} will list the files it is acting on as it is working. In
verbose mode, the @code{create} example above would appear as:
@end smallexample
This example is just like the example we showed which did not use
-@option{--verbose}, except that @command{tar} generated the remaining lines
+@option{--verbose}, except that @command{tar} generated the remaining
@iftex
-(note the different font styles).
+lines (note the different font styles).
@end iftex
@ifinfo
-.
+lines.
@end ifinfo
In the rest of the examples in this chapter, we will frequently use
@node short create
@subsection Short Forms with @samp{create}
-As we said before, the @value{op-create} operation is one of the most
+As we said before, the @option{--create} (@option{-c}) operation is one of the most
basic uses of @command{tar}, and you will use it countless times.
Eventually, you will probably want to use abbreviated (or ``short'')
forms of options. A full discussion of the three different forms that
options can take appears in @ref{Styles}; for now, here is what the
-previous example (including the @value{op-verbose} option) looks like
+previous example (including the @option{--verbose} (@option{-v}) option) looks like
using short option forms:
@smallexample
especially when using short option forms. Not having the option name
written out mnemonically can affect how well you remember which option
does what, and therefore where different names have to be placed.
-(Placing options in an unusual order can also cause @command{tar} to
-report an error if you have set the shell environment variable
-@env{POSIXLY_CORRECT}.)
@node create dir
@subsection Archiving Directories
write access to the superior directory itself, not only the directory
you are trying archive with @command{tar}. For example, you will probably
not be able to store your home directory in an archive by invoking
-@command{tar} from the root directory; @value{xref-absolute-names}. (Note
+@command{tar} from the root directory; @xref{absolute}. (Note
also that @file{collection.tar}, the original archive file, has itself
been archived. @command{tar} will accept any file as a file to be
archived, regardless of its content. When @file{music.tar} is
it. (It makes no sense to put an archive into itself.) @GNUTAR{}
will continue in this case, and create the archive
normally, except for the exclusion of that one file. (@emph{Please
-note:} Other versions of @command{tar} are not so clever; they will
-enter an infinite loop when this happens, so you should not depend on
-this behavior unless you are certain you are running @GNUTAR{}.)
- @FIXME{bob doesn't like this sentence, since he does
-it all the time, and we've been doing it in the editing passes for
-this manual: In general, make sure that the archive is not inside a
-directory being dumped.}
+note:} Other implementations of @command{tar} may not be so clever;
+they will enter an infinite loop when this happens, so you should not
+depend on this behavior unless you are certain you are running
+@GNUTAR{}. In general, it is wise to always place the archive outside
+of the directory being dumped.)
@node list
@section How to List Archives
+@opindex list
Frequently, you will find yourself wanting to determine exactly what a
-particular archive contains. You can use the @value{op-list} operation
-to get the member names as they currently appear in the archive, as well
-as various attributes of the files at the time they were archived. For
-example, you can examine the archive @file{collection.tar} that you
-created in the last section with the command,
+particular archive contains. You can use the @option{--list}
+(@option{-t}) operation to get the member names as they currently
+appear in the archive, as well as various attributes of the files at
+the time they were archived. For example, you can examine the archive
+@file{collection.tar} that you created in the last section with the
+command,
@smallexample
$ @kbd{tar --list --file=collection.tar}
jazz
@end smallexample
-@FIXME{we hope this will change. if it doesn't, need to show the
-creation of bfiles somewhere above!!! : }
-
@noindent
The archive @file{bfiles.tar} would list as follows:
@end smallexample
@noindent
-Be sure to use a @value{op-file} option just as with @value{op-create}
-to specify the name of the archive.
+Be sure to use a @option{--file=@var{archive-name}} (@option{-f
+@var{archive-name}}) option just as with @option{--create}
+(@option{-c}) to specify the name of the archive.
-If you use the @value{op-verbose} option with @option{--list}, then
-@command{tar} will print out a listing reminiscent of @w{@samp{ls -l}},
-showing owner, file size, and so forth.
+@xopindex{list, using with @option{--verbose}}
+@xopindex{verbose, using with @option{--list}}
+If you use the @option{--verbose} (@option{-v}) option with
+@option{--list}, then @command{tar} will print out a listing
+reminiscent of @w{@samp{ls -l}}, showing owner, file size, and so
+forth. This output is described in detail in @ref{verbose member listing}.
-If you had used @value{op-verbose} mode, the example above would look
-like:
+If you had used @option{--verbose} (@option{-v}) mode, the example
+above would look like:
@smallexample
$ @kbd{tar --list --verbose --file=collection.tar folk}
--rw-rw-rw- myself user 62 1990-05-23 10:55 folk
+-rw-r--r-- myself user 62 1990-05-23 10:55 folk
@end smallexample
@cindex listing member and file names
@smallexample
@group
-$ @kbd{tar cfv archive /etc/mail}
+$ @kbd{tar --create --verbose --file archive /etc/mail}
tar: Removing leading `/' from member names
/etc/mail/
/etc/mail/sendmail.cf
/etc/mail/aliases
-$ @kbd{tar tf archive}
+$ @kbd{tar --test --file archive}
etc/mail/
etc/mail/sendmail.cf
etc/mail/aliases
@end group
@end smallexample
-@cindex @option{--show-stored-names} described
+@opindex show-stored-names
This default behavior can sometimes be inconvenient. You can force
@GNUTAR{} show member names when creating archive by supplying
@option{--show-stored-names} option.
@table @option
@item --show-stored-names
-Print member (not @emph{file}) names when creating the archive.
+Print member (as opposed to @emph{file}) names when creating the archive.
@end table
@cindex File name arguments, using @option{--list} with
-@cindex @option{--list} with file name arguments
+@xopindex{list, using with file name arguments}
You can specify one or more individual member names as arguments when
using @samp{list}. In this case, @command{tar} will only list the
names of members you identify. For example, @w{@kbd{tar --list
--file=afiles.tar apple}} would only print @file{apple}.
-@FIXME{we hope the relevant aspects of this will change:}Because
-@command{tar} preserves paths, file names must be specified as they appear
-in the archive (ie., relative to the directory from which the archive
-was created). Therefore, it is essential when specifying member names
-to @command{tar} that you give the exact member names. For example,
-@w{@kbd{tar --list --file=bfiles birds}} would produce an error message
-something like @samp{tar: birds: Not found in archive}, because there is
-no member named @file{birds}, only one named @file{./birds}. While the
-names @file{birds} and @file{./birds} name the same file, @emph{member}
-names are compared using a simplistic name comparison, in which an exact
-match is necessary. @xref{absolute}.
-
-However, @w{@kbd{tar --list --file=collection.tar folk}} would respond
-with @file{folk}, because @file{folk} is in the archive file
-@file{collection.tar}. If you are not sure of the exact file name, try
-listing all the files in the archive and searching for the one you
-expect to find; remember that if you use @option{--list} with no file
-names as arguments, @command{tar} will print the names of all the members
-stored in the specified archive.
+Because @command{tar} preserves file names, these must be specified as
+they appear in the archive (i.e., relative to the directory from which
+the archive was created). Therefore, it is essential when specifying
+member names to @command{tar} that you give the exact member names.
+For example, @w{@kbd{tar --list --file=bfiles.tar birds}} would produce an
+error message something like @samp{tar: birds: Not found in archive},
+because there is no member named @file{birds}, only one named
+@file{./birds}. While the names @file{birds} and @file{./birds} name
+the same file, @emph{member} names by default are compared verbatim.
+
+However, @w{@kbd{tar --list --file=bfiles.tar baboon}} would respond
+with @file{baboon}, because this exact member name is in the archive file
+@file{bfiles.tar}. If you are not sure of the exact file name,
+use @dfn{globbing patterns}, for example:
+
+@smallexample
+$ @kbd{tar --list --file=bfiles.tar --wildcards '*b*'}
+@end smallexample
+
+@noindent
+will list all members whose name contains @samp{b}. @xref{wildcards},
+for a detailed discussion of globbing patterns and related
+@command{tar} command line options.
@menu
* list dir::
To get information about the contents of an archived directory,
use the directory name as a file name argument in conjunction with
-@value{op-list}. To find out file attributes, include the
-@value{op-verbose} option.
+@option{--list} (@option{-t}). To find out file attributes, include the
+@option{--verbose} (@option{-v}) option.
For example, to find out about files in the directory @file{practice}, in
the archive file @file{music.tar}, type:
@smallexample
drwxrwxrwx myself user 0 1990-05-31 21:49 practice/
--rw-rw-rw- myself user 42 1990-05-21 13:29 practice/blues
--rw-rw-rw- myself user 62 1990-05-23 10:55 practice/folk
--rw-rw-rw- myself user 40 1990-05-21 13:30 practice/jazz
--rw-rw-rw- myself user 10240 1990-05-31 21:49 practice/collection.tar
+-rw-r--r-- myself user 42 1990-05-21 13:29 practice/blues
+-rw-r--r-- myself user 62 1990-05-23 10:55 practice/folk
+-rw-r--r-- myself user 40 1990-05-21 13:30 practice/jazz
+-rw-r--r-- myself user 10240 1990-05-31 21:49 practice/collection.tar
@end smallexample
When you use a directory name as a file name argument, @command{tar} acts on
@node extract
@section How to Extract Members from an Archive
-@UNREVISED
@cindex Extraction
@cindex Retrieving files from an archive
@cindex Resurrecting files from an archive
+@opindex extract
Creating an archive is only half the job---there is no point in storing
files in an archive if you can't retrieve them. The act of retrieving
members from an archive so they can be used and manipulated as
unarchived files again is called @dfn{extraction}. To extract files
-from an archive, use the @value{op-extract} operation. As with
-@value{op-create}, specify the name of the archive with @value{op-file}.
-Extracting an archive does not modify the archive in any way; you can
-extract it multiple times if you want or need to.
+from an archive, use the @option{--extract} (@option{--get} or
+@option{-x}) operation. As with @option{--create}, specify the name
+of the archive with @option{--file} (@option{-f}) option. Extracting
+an archive does not modify the archive in any way; you can extract it
+multiple times if you want or need to.
Using @option{--extract}, you can extract an entire archive, or specific
files. The files can be directories containing other files, or not. As
-with @value{op-create} and @value{op-list}, you may use the short or the
+with @option{--create} (@option{-c}) and @option{--list} (@option{-t}), you may use the short or the
long form of the operation without affecting the performance.
@menu
produces this:
@smallexample
--rw-rw-rw- me user 28 1996-10-18 16:31 jazz
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
--rw-rw-rw- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 20 1996-09-23 16:44 folk
@end smallexample
@node extracting files
@subsection Extracting Specific Files
To extract specific archive members, give their exact member names as
-arguments, as printed by @value{op-list}. If you had mistakenly deleted
-one of the files you had placed in the archive @file{collection.tar}
-earlier (say, @file{blues}), you can extract it from the archive without
-changing the archive's structure. Its contents will be identical to the
-original file @file{blues} that you deleted.
+arguments, as printed by @option{--list} (@option{-t}). If you had
+mistakenly deleted one of the files you had placed in the archive
+@file{collection.tar} earlier (say, @file{blues}), you can extract it
+from the archive without changing the archive's structure. Its
+contents will be identical to the original file @file{blues} that you
+deleted.
First, make sure you are in the @file{practice} directory, and list the
files in the directory. Now, delete the file, @samp{blues}, and list
@noindent
If you list the files in the directory again, you will see that the file
-@file{blues} has been restored, with its original permissions, data modification
-times, and owner.@FIXME{This is only accidentally true, but not in
-general. In most cases, one has to be root for restoring the owner, and
-use a special option for restoring permissions. Here, it just happens
-that the restoring user is also the owner of the archived members, and
-that the current @code{umask} is compatible with original permissions.}
-(These parameters will be identical to those which
+@file{blues} has been restored, with its original permissions, data
+modification times, and owner.@footnote{This is only accidentally
+true, but not in general. Whereas modification times are always
+restored, in most cases, one has to be root for restoring the owner,
+and use a special option for restoring permissions. Here, it just
+happens that the restoring user is also the owner of the archived
+members, and that the current @code{umask} is compatible with original
+permissions.} (These parameters will be identical to those which
the file had when you originally placed it in the archive; any changes
you may have made before deleting the file from the file system,
however, will @emph{not} have been made to the archive member.) The
archive file, @samp{collection.tar}, is the same as it was before you
extracted @samp{blues}. You can confirm this by running @command{tar} with
-@value{op-list}.
+@option{--list} (@option{-t}).
+
+Remember that as with other operations, specifying the exact member
+name is important. @w{@kbd{tar --extract --file=bfiles.tar birds}}
+will fail, because there is no member named @file{birds}. To extract
+the member named @file{./birds}, you must specify @w{@kbd{tar
+--extract --file=bfiles.tar ./birds}}. If you don't remember the
+exact member names, use @option{--list} (@option{-t}) option
+(@pxref{list}). You can also extract those members that match a
+specific @dfn{globbing pattern}. For example, to extract from
+@file{bfiles.tar} all files that begin with @samp{b}, no matter their
+directory prefix, you could type:
+
+@smallexample
+$ @kbd{tar -x -f bfiles.tar --wildcards --no-anchored 'b*'}
+@end smallexample
-@FIXME{we hope this will change:}Remember that as with other operations,
-specifying the exact member name is important. @w{@kbd{tar --extract
---file=bfiles.tar birds}} will fail, because there is no member named
-@file{birds}. To extract the member named @file{./birds}, you must
-specify @w{@kbd{tar --extract --file=bfiles.tar ./birds}}. To find the
-exact member names of the members of an archive, use @value{op-list}
-(@pxref{list}).
+@noindent
+Here, @option{--wildcards} instructs @command{tar} to treat
+command line arguments as globbing patterns and @option{--no-anchored}
+informs it that the patterns apply to member names after any @samp{/}
+delimiter. The use of globbing patterns is discussed in detail in
+@xref{wildcards}.
You can extract a file to standard output by combining the above options
-with the @value{op-to-stdout} option (@pxref{Writing to Standard
+with the @option{--to-stdout} (@option{-O}) option (@pxref{Writing to Standard
Output}).
-If you give the @value{op-verbose} option, then @value{op-extract} will
-print the names of the archive members as it extracts them.
+If you give the @option{--verbose} option, then @option{--extract}
+will print the names of the archive members as it extracts them.
@node extract dir
@subsection Extracting Files that are Directories
@end smallexample
@noindent
-If you were to specify two @value{op-verbose} options, @command{tar}
+If you were to specify two @option{--verbose} (@option{-v}) options, @command{tar}
would have displayed more detail about the extracted files, as shown
in the example below:
@smallexample
$ @kbd{tar -xvvf music.tar practice/folk practice/jazz}
--rw-rw-rw- me user 28 1996-10-18 16:31 practice/jazz
--rw-rw-rw- me user 20 1996-09-23 16:44 practice/folk
+-rw-r--r-- me user 28 1996-10-18 16:31 practice/jazz
+-rw-r--r-- me user 20 1996-09-23 16:44 practice/folk
@end smallexample
@noindent
directory as @file{practice}, you must give @file{practice} as part
of the file names when you extract those files from the archive.
-@FIXME{IMPORTANT! show the final structure, here. figure out what it
-will be.}
-
@node extracting untrusted archives
@subsection Extracting Archives from Untrusted Sources
@end smallexample
It is also a good practice to examine contents of the archive
-before extracting it, using @value{op-list} option, possibly combined
-with @value{op-verbose}.
+before extracting it, using @option{--list} (@option{-t}) option, possibly combined
+with @option{--verbose} (@option{-v}).
@node failing commands
@subsection Commands That Will Fail
@smallexample
tar: folk: Not found in archive
tar: jazz: Not found in archive
-$
@end smallexample
@noindent
@smallexample
$ @kbd{tar -tvf music.tar}
+practice/blues
practice/folk
practice/jazz
-practice/rock
@end smallexample
@FIXME{make sure the above works when going through the examples in
@noindent
you would get a similar response. Members with those names are not in the
-archive. You must use the correct member names in order to extract the
-files from the archive.
+archive. You must use the correct member names, or wildcards, in order
+to extract the files from the archive.
If you have forgotten the correct names of the files in the archive,
use @w{@kbd{tar --list --verbose}} to list them correctly.
@node going further
@section Going Further Ahead in this Manual
+@UNREVISED
@FIXME{need to write up a node here about the things that are going to
be in the rest of the manual.}
@node tar invocation
@chapter Invoking @GNUTAR{}
-@UNREVISED
This chapter is about how one invokes the @GNUTAR{}
command, from the command synopsis (@pxref{Synopsis}). There are
Some options are so special they are fully described right in this
chapter. They have the effect of inhibiting the normal operation of
@command{tar} or else, they globally alter the amount of feedback the user
-receives about what is going on. These are the @value{op-help} and
-@value{op-version} (@pxref{help}), @value{op-verbose} (@pxref{verbose})
-and @value{op-interactive} options (@pxref{interactive}).
+receives about what is going on. These are the @option{--help} and
+@option{--version} (@pxref{help}), @option{--verbose} (@pxref{verbose})
+and @option{--interactive} options (@pxref{interactive}).
@menu
* Synopsis::
* Styles::
* All Options::
* help::
+* defaults::
* verbose::
+* checkpoints::
+* warnings::
* interactive::
@end menu
(the @command{tar} main command) is usually given first.
Each @var{name} in the synopsis above is interpreted as an archive member
-name when the main command is one of @value{op-compare}, @value{op-delete},
-@value{op-extract}, @value{op-list} or @value{op-update}. When naming
-archive members, you must give the exact name of the member in the
-archive, as it is printed by @value{op-list}. For @value{op-append}
-and @value{op-create}, these @var{name} arguments specify the names
-of either files or directory hierarchies to place in the archive.
+name when the main command is one of @option{--compare}
+(@option{--diff}, @option{-d}), @option{--delete}, @option{--extract}
+(@option{--get}, @option{-x}), @option{--list} (@option{-t}) or
+@option{--update} (@option{-u}). When naming archive members, you
+must give the exact name of the member in the archive, as it is
+printed by @option{--list}. For @option{--append} (@option{-r}) and
+@option{--create} (@option{-c}), these @var{name} arguments specify
+the names of either files or directory hierarchies to place in the archive.
These files or hierarchies should already exist in the file system,
prior to the execution of the @command{tar} command.
@command{tar} interprets relative file names as being relative to the
working directory. @command{tar} will make all file names relative
(by removing leading slashes when archiving or restoring files),
-unless you specify otherwise (using the @value{op-absolute-names}
-option). @value{xref-absolute-names}, for more information about
-@value{op-absolute-names}.
+unless you specify otherwise (using the @option{--absolute-names}
+option). @xref{absolute}, for more information about
+@option{--absolute-names}.
If you give the name of a directory as either a file name or a member
name, then @command{tar} acts recursively on all the files and directories
The distinction between file names and archive member names is especially
important when shell globbing is used, and sometimes a source of confusion
-for newcomers. @xref{Wildcards}, for more information about globbing.
+for newcomers. @xref{wildcards}, for more information about globbing.
The problem is that shells may only glob using existing files in the
file system. Only @command{tar} itself may glob on archive members, so when
needed, you must ensure that wildcard characters reach @command{tar} without
Even if @var{name}s are often specified on the command line, they
can also be read from a text file in the file system, using the
-@value{op-files-from} option.
+@option{--files-from=@var{file-of-names}} (@option{-T @var{file-of-names}}) option.
-If you don't use any file name arguments, @value{op-append},
-@value{op-delete} and @value{op-concatenate} will do nothing, while
-@value{op-create} will usually yield a diagnostic and inhibit @command{tar}
-execution. The other operations of @command{tar} (@value{op-list},
-@value{op-extract}, @value{op-compare}, and @value{op-update}) will act
-on the entire contents of the archive.
+If you don't use any file name arguments, @option{--append} (@option{-r}),
+@option{--delete} and @option{--concatenate} (@option{--catenate},
+@option{-A}) will do nothing, while @option{--create} (@option{-c})
+will usually yield a diagnostic and inhibit @command{tar} execution.
+The other operations of @command{tar} (@option{--list},
+@option{--extract}, @option{--compare}, and @option{--update})
+will act on the entire contents of the archive.
@cindex exit status
@cindex return status
Besides successful exits, @GNUTAR{} may fail for
many reasons. Some reasons correspond to bad usage, that is, when the
-@command{tar} command is improperly written. Errors may be
-encountered later, while encountering an error processing the archive
-or the files. Some errors are recoverable, in which case the failure
-is delayed until @command{tar} has completed all its work. Some
-errors are such that it would not meaningful, or at least risky, to
-continue processing: @command{tar} then aborts processing immediately.
-All abnormal exits, whether immediate or delayed, should always be
-clearly diagnosed on @code{stderr}, after a line stating the nature of
-the error.
-
-@GNUTAR{} returns only a few exit statuses. I'm really
-aiming simplicity in that area, for now. If you are not using the
-@value{op-compare} option, zero means that everything went well, besides
-maybe innocuous warnings. Nonzero means that something went wrong.
-Right now, as of today, ``nonzero'' is almost always 2, except for
-remote operations, where it may be 128.
+@command{tar} command line is improperly written. Errors may be
+encountered later, while processing the archive or the files. Some
+errors are recoverable, in which case the failure is delayed until
+@command{tar} has completed all its work. Some errors are such that
+it would be not meaningful, or at least risky, to continue processing:
+@command{tar} then aborts processing immediately. All abnormal exits,
+whether immediate or delayed, should always be clearly diagnosed on
+@code{stderr}, after a line stating the nature of the error.
+
+Possible exit codes of @GNUTAR{} are summarized in the following
+table:
+
+@table @asis
+@item 0
+@samp{Successful termination}.
+
+@item 1
+@samp{Some files differ}. If tar was invoked with @option{--compare}
+(@option{--diff}, @option{-d}) command line option, this means that
+some files in the archive differ from their disk counterparts
+(@pxref{compare}). If tar was given @option{--create},
+@option{--append} or @option{--update} option, this exit code means
+that some files were changed while being archived and so the resulting
+archive does not contain the exact copy of the file set.
+
+@item 2
+@samp{Fatal error}. This means that some fatal, unrecoverable error
+occurred.
+@end table
+
+If @command{tar} has invoked a subprocess and that subprocess exited with a
+nonzero exit code, @command{tar} exits with that code as well.
+This can happen, for example, if @command{tar} was given some
+compression option (@pxref{gzip}) and the external compressor program
+failed. Another example is @command{rmt} failure during backup to the
+remote device (@pxref{Remote Tape Server}).
@node using tar options
@section Using @command{tar} Options
allow you to perform a variety of tasks. You are required to choose
one operating mode each time you employ the @command{tar} program by
specifying one, and only one operation as an argument to the
-@command{tar} command (two lists of four operations each may be found
+@command{tar} command (the corresponding options may be found
at @ref{frequent operations} and @ref{Operations}). Depending on
circumstances, you may also wish to customize how the chosen operating
mode behaves. For example, you may wish to change the way the output
you to do something special in order to make the archive look right.
You can customize and control @command{tar}'s performance by running
-@command{tar} with one or more options (such as @value{op-verbose}, which
-we used in the tutorial). As we said in the tutorial, @dfn{options} are
-arguments to @command{tar} which are (as their name suggests) optional.
-Depending on the operating mode, you may specify one or more options.
-Different options will have different effects, but in general they all
-change details of the operation, such as archive format, archive name,
-or level of user interaction. Some options make sense with all
-operating modes, while others are meaningful only with particular modes.
-You will likely use some options frequently, while you will only use
-others infrequently, or not at all. (A full list of options is
-available in @pxref{All Options}.)
-
+@command{tar} with one or more options (such as @option{--verbose}
+(@option{-v}), which we used in the tutorial). As we said in the
+tutorial, @dfn{options} are arguments to @command{tar} which are (as
+their name suggests) optional. Depending on the operating mode, you
+may specify one or more options. Different options will have different
+effects, but in general they all change details of the operation, such
+as archive format, archive name, or level of user interaction. Some
+options make sense with all operating modes, while others are
+meaningful only with particular modes. You will likely use some
+options frequently, while you will only use others infrequently, or
+not at all. (A full list of options is available in @pxref{All Options}.)
+
+@vrindex TAR_OPTIONS, environment variable
+@anchor{TAR_OPTIONS}
The @env{TAR_OPTIONS} environment variable specifies default options to
be placed in front of any explicit options. For example, if
@code{TAR_OPTIONS} is @samp{-v --unlink-first}, @command{tar} behaves as
options @option{-T} and @option{-t} are different; the first requires an
argument for stating the name of a file providing a list of @var{name}s,
while the second does not require an argument and is another way to
-write @value{op-list}.
+write @option{--list} (@option{-t}).
In addition to the eight operations, there are many options to
@command{tar}, and three different styles for writing both: long (mnemonic)
different times during the history of @command{tar}. These styles will be
presented below, from the most recent to the oldest.
-Some options must take an argument. (For example, @value{op-file} takes
-the name of an archive file as an argument. If you do not supply an
-archive file name, @command{tar} will use a default, but this can be
-confusing; thus, we recommend that you always supply a specific archive
-file name.) Where you @emph{place} the arguments generally depends on
-which style of options you choose. We will detail specific information
-relevant to each option style in the sections on the different option
-styles, below. The differences are subtle, yet can often be very
-important; incorrect option placement can cause you to overwrite a
-number of important files. We urge you to note these differences, and
-only use the option style(s) which makes the most sense to you until you
-feel comfortable with the others.
-
-Some options @emph{may} take an argument (currently, there are
-two such options: @value{op-backup} and @value{op-occurrence}). Such
-options may have at most long and short forms, they do not have old style
-equivalent. The rules for specifying an argument for such options
-are stricter than those for specifying mandatory arguments. Please,
-pay special attention to them.
+Some options must take an argument@footnote{For example, @option{--file}
+(@option{-f}) takes the name of an archive file as an argument. If
+you do not supply an archive file name, @command{tar} will use a
+default, but this can be confusing; thus, we recommend that you always
+supply a specific archive file name.}. Where you @emph{place} the
+arguments generally depends on which style of options you choose. We
+will detail specific information relevant to each option style in the
+sections on the different option styles, below. The differences are
+subtle, yet can often be very important; incorrect option placement
+can cause you to overwrite a number of important files. We urge you
+to note these differences, and only use the option style(s) which
+makes the most sense to you until you feel comfortable with the others.
+
+Some options @emph{may} take an argument. Such options may have at
+most long and short forms, they do not have old style equivalent. The
+rules for specifying an argument for such options are stricter than
+those for specifying mandatory arguments. Please, pay special
+attention to them.
@menu
-* Mnemonic Options:: Mnemonic Option Style
+* Long Options:: Long Option Style
* Short Options:: Short Option Style
* Old Options:: Old Option Style
* Mixing:: Mixing Option Styles
@end menu
-@node Mnemonic Options
-@subsection Mnemonic Option Style
+@node Long Options
+@subsection Long Option Style
-@FIXME{have to decide whether or not to replace other occurrences of
-"mnemonic" with "long", or *ugh* vice versa.}
-
-Each option has at least one long (or mnemonic) name starting with two
+@cindex long options
+@cindex options, long style
+@cindex options, GNU style
+@cindex options, mnemonic names
+Each option has at least one @dfn{long} (or @dfn{mnemonic}) name starting with two
dashes in a row, e.g., @option{--list}. The long names are more clear than
their corresponding short or old names. It sometimes happens that a
-single mnemonic option has many different different names which are
+single long option has many different names which are
synonymous, such as @option{--compare} and @option{--diff}. In addition,
long option names can be given unique abbreviations. For example,
@option{--cre} can be used in place of @option{--create} because there is no
-other mnemonic option which begins with @samp{cre}. (One way to find
+other long option which begins with @samp{cre}. (One way to find
this out is by trying it and seeing what happens; if a particular
abbreviation could represent more than one option, @command{tar} will tell
you that that abbreviation is ambiguous and you'll know that that
unique abbreviation for the long name of an option you didn't want to
use, you are stuck; @command{tar} will perform the command as ordered.)
-Mnemonic options are meant to be obvious and easy to remember, and their
+Long options are meant to be obvious and easy to remember, and their
meanings are generally easier to discern than those of their
corresponding short options (see below). For example:
gives a fairly good set of hints about what the command does, even
for those not fully acquainted with @command{tar}.
-Mnemonic options which require arguments take those arguments
+@cindex arguments to long options
+@cindex long options with mandatory arguments
+Long options which require arguments take those arguments
immediately following the option name. There are two ways of
specifying a mandatory argument. It can be separated from the
option name either by an equal sign, or by any amount of
@file{archive.tar} as argument by using any of the following notations:
@option{--file=archive.tar} or @option{--file archive.tar}.
+@cindex optional arguments to long options
+@cindex long options with optional arguments
In contrast, optional arguments must always be introduced using
an equal sign. For example, the @option{--backup} option takes
an optional argument specifying backup type. It must be used
@node Short Options
@subsection Short Option Style
-Most options also have a short option name. Short options start with
+@cindex short options
+@cindex options, short style
+@cindex options, traditional
+Most options also have a @dfn{short option} name. Short options start with
a single dash, and are followed by a single character, e.g., @option{-t}
(which is equivalent to @option{--list}). The forms are absolutely
identical in function; they are interchangeable.
The short option names are faster to type than long option names.
+@cindex arguments to short options
+@cindex short options with mandatory arguments
Short options which require arguments take their arguments immediately
following the option, usually separated by white space. It is also
possible to stick the argument right after the short option name, using
@w{@option{-f @var{archive-name}}} denote the option which indicates a
specific archive, here named @file{archive.tar}.
+@cindex optional arguments to short options
+@cindex short options with optional arguments
Short options which take optional arguments take their arguments
immediately following the option letter, @emph{without any intervening
white space characters}.
@node Old Options
@subsection Old Option Style
-@UNREVISED
+@cindex options, old style
+@cindex old option style
-Like short options, old options are single letters. However, old options
+Like short options, @dfn{old options} are single letters. However, old options
must be written together as a single clumped set, without spaces separating
them or dashes preceding them@footnote{Beware that if you precede options
with a dash, you are announcing the short option style instead of the
anywhere else. The letter of an old option is exactly the same letter as
the corresponding short option. For example, the old option @samp{t} is
the same as the short option @option{-t}, and consequently, the same as the
-mnemonic option @option{--list}. So for example, the command @w{@samp{tar
+long option @option{--list}. So for example, the command @w{@samp{tar
cv}} specifies the option @option{-v} in addition to the operation @option{-c}.
-@FIXME{bob suggests having an uglier example. :-) }
-
+@cindex arguments to old options
+@cindex old options with mandatory arguments
When options that need arguments are given together with the command,
all the associated arguments follow, in the same order as the options.
Thus, the example given previously could also be written in the old
@kbd{tar cf archive.tar.gz -z file}
@end smallexample
-@FIXME{still could explain this better; it's redundant:}
-
@cindex option syntax, traditional
As far as we know, all @command{tar} programs, @acronym{GNU} and
non-@acronym{GNU}, support old options. @GNUTAR{}
the first argument is always treated as containing command and option
letters even if it doesn't start with @samp{-}. Thus, @samp{tar c} is
equivalent to @w{@samp{tar -c}:} both of them specify the
-@value{op-create} command to create an archive.
+@option{--create} (@option{-c}) command to create an archive.
@node Mixing
@subsection Mixing Option Styles
+@cindex options, mixing different styles
All three styles may be intermixed in a single @command{tar} command,
so long as the rules for each style are fully
respected@footnote{Before @GNUTAR{} version 1.11.6,
-a bug prevented intermixing old style options with mnemonic options in
+a bug prevented intermixing old style options with long options in
some cases.}. Old style options and either of the modern styles of
options may be mixed within a single @command{tar} command. However,
old style options must be introduced as the first arguments only,
@section All @command{tar} Options
The coming manual sections contain an alphabetical listing of all
-@command{tar} operations and options, with brief descriptions and cross
-references to more in-depth explanations in the body of the manual.
+@command{tar} operations and options, with brief descriptions and
+cross-references to more in-depth explanations in the body of the manual.
They also contain an alphabetically arranged table of the short option
forms with their corresponding long option. You can use this table as
a reference for deciphering @command{tar} commands in scripts.
@table @option
+@opsummary{append}
@item --append
@itemx -r
Appends files to the end of the archive. @xref{append}.
+@opsummary{catenate}
@item --catenate
@itemx -A
Same as @option{--concatenate}. @xref{concatenate}.
+@opsummary{compare}
@item --compare
@itemx -d
system, and reports differences in file size, mode, owner,
modification date and contents. @xref{compare}.
+@opsummary{concatenate}
@item --concatenate
@itemx -A
Appends other @command{tar} archives to the end of the archive.
@xref{concatenate}.
+@opsummary{create}
@item --create
@itemx -c
Creates a new @command{tar} archive. @xref{create}.
+@opsummary{delete}
@item --delete
-Deletes members from the archive. Don't try this on a archive on a
+Deletes members from the archive. Don't try this on an archive on a
tape! @xref{delete}.
+@opsummary{diff}
@item --diff
@itemx -d
Same @option{--compare}. @xref{compare}.
+@opsummary{extract}
@item --extract
@itemx -x
Extracts members from the archive into the file system. @xref{extract}.
+@opsummary{get}
@item --get
@itemx -x
Same as @option{--extract}. @xref{extract}.
+@opsummary{list}
@item --list
@itemx -t
Lists the members in an archive. @xref{list}.
+@opsummary{update}
@item --update
@itemx -u
-@FIXME{It was: A combination of the @option{--compare} and
-@option{--append} operations. This is not true and rather misleading,
-as @value{op-compare} does a lot more than @value{op-update} for
-ensuring files are identical.} Adds files to the end of the archive,
-but only if they are newer than their counterparts already in the
-archive, or if they do not already exist in the archive.
-@xref{update}.
+Adds files to the end of the archive, but only if they are newer than
+their counterparts already in the archive, or if they do not already
+exist in the archive. @xref{update}.
@end table
@table @option
+@opsummary{absolute-names}
@item --absolute-names
@itemx -P
@samp{/} from member names. This option disables that behavior.
@xref{absolute}.
+@opsummary{after-date}
@item --after-date
-(See @option{--newer}.) @FIXME-pxref{}
+(See @option{--newer}, @pxref{after})
+@opsummary{anchored}
@item --anchored
-An exclude pattern must match an initial subsequence of the name's components.
-@FIXME-xref{}
+A pattern must match an initial subsequence of the name's components.
+@xref{controlling pattern-matching}.
+@opsummary{atime-preserve}
@item --atime-preserve
@itemx --atime-preserve=replace
@itemx --atime-preserve=system
option currently is effective only on files that you own, unless you
have superuser privileges.
-@value{op-atime-preserve-replace} remembers the access time of a file
+@option{--atime-preserve=replace} remembers the access time of a file
before reading it, and then restores the access time afterwards. This
may cause problems if other programs are reading the file at the same
time, as the times of their accesses will be lost. On most platforms
restoring the access time also requires @command{tar} to restore the
data modification time too, so this option may also cause problems if
-other programs are writing the file at the same time. (Tar attempts
+other programs are writing the file at the same time (@command{tar} attempts
to detect this situation, but cannot do so reliably due to race
-conditions.) Worse, on most platforms restoring the access time also
+conditions). Worse, on most platforms restoring the access time also
updates the status change time, which means that this option is
incompatible with incremental backups.
-@value{op-atime-preserve-system} avoids changing time stamps on files,
+@option{--atime-preserve=system} avoids changing time stamps on files,
without interfering with time stamp updates
caused by other programs, so it works better with incremental backups.
However, it requires a special @code{O_NOATIME} option from the
Linux kernels 2.6.8 and later. Worse, there is currently no reliable
way to know whether this feature actually works. Sometimes
@command{tar} knows that it does not work, and if you use
-@value{op-atime-preserve-system} then @command{tar} complains and
+@option{--atime-preserve=system} then @command{tar} complains and
exits right away. But other times @command{tar} might think that the
option works when it actually does not.
Currently @option{--atime-preserve} with no operand defaults to
-@value{op-atime-preserve-replace}, but this may change in the future
-as support for @value{op-atime-preserve-system} improves.
+@option{--atime-preserve=replace}, but this may change in the future
+as support for @option{--atime-preserve=system} improves.
-If your operating system does not support
-@value{op-atime-preserve-system}, you might be able to preserve access
-times reliably by by using the @command{mount} command. For example,
+If your operating or file system does not support
+@option{--atime-preserve=@-system}, you might be able to preserve access
+times reliably by using the @command{mount} command. For example,
you can mount the file system read-only, or access the file system via
a read-only loopback mount, or use the @samp{noatime} mount option
available on some systems. However, mounting typically requires
superuser privileges and can be a pain to manage.
+@opsummary{auto-compress}
+@item --auto-compress
+@itemx -a
+
+During a @option{--create} operation, enables automatic compressed
+format recognition based on the archive suffix. The effect of this
+option is cancelled by @option{--no-auto-compress}. @xref{gzip}.
+
+@opsummary{backup}
@item --backup=@var{backup-type}
Rather than deleting files from the file system, @command{tar} will
back them up using simple or numbered backups, depending upon
-@var{backup-type}. @FIXME-xref{}
+@var{backup-type}. @xref{backup}.
+@opsummary{block-number}
@item --block-number
@itemx -R
With this option present, @command{tar} prints error messages for read errors
-with the block number in the archive file. @FIXME-xref{}
+with the block number in the archive file. @xref{block-number}.
+@opsummary{blocking-factor}
@item --blocking-factor=@var{blocking}
@itemx -b @var{blocking}
Sets the blocking factor @command{tar} uses to @var{blocking} x 512 bytes per
-record. @FIXME-xref{}
+record. @xref{Blocking Factor}.
+@opsummary{bzip2}
@item --bzip2
@itemx -j
This option tells @command{tar} to read or write archives through
-@code{bzip2}. @FIXME-xref{}
+@code{bzip2}. @xref{gzip}.
+
+@opsummary{check-device}
+@item --check-device
+Check device numbers when creating a list of modified files for
+incremental archiving. This is the default. @xref{device numbers},
+for a detailed description.
+
+@opsummary{checkpoint}
+@item --checkpoint[=@var{number}]
-@item --checkpoint
+This option directs @command{tar} to print periodic checkpoint
+messages as it reads through the archive. It is intended for when you
+want a visual indication that @command{tar} is still running, but
+don't want to see @option{--verbose} output. You can also instruct
+@command{tar} to execute a list of actions on each checkpoint, see
+@option{--checkpoint-action} below. For a detailed description, see
+@ref{checkpoints}.
-This option directs @command{tar} to print periodic checkpoint messages as it
-reads through the archive. Its intended for when you want a visual
-indication that @command{tar} is still running, but don't want to see
-@option{--verbose} output. @FIXME-xref{}
+@opsummary{checkpoint-action}
+@item --checkpoint-action=@var{action}
+Instruct @command{tar} to execute an action upon hitting a
+breakpoint. Here we give only a brief outline. @xref{checkpoints},
+for a complete description.
+The @var{action} argument can be one of the following:
+
+@table @asis
+@item bell
+Produce an audible bell on the console.
+
+@item dot
+@itemx .
+Print a single dot on the standard listing stream.
+
+@item echo
+Display a textual message on the standard error, with the status and
+number of the checkpoint. This is the default.
+
+@item echo=@var{string}
+Display @var{string} on the standard error. Before output, the string
+is subject to meta-character expansion.
+
+@item exec=@var{command}
+Execute the given @var{command}.
+
+@item sleep=@var{time}
+Wait for @var{time} seconds.
+
+@item ttyout=@var{string}
+Output @var{string} on the current console (@file{/dev/tty}).
+@end table
+
+Several @option{--checkpoint-action} options can be specified. The
+supplied actions will be executed in order of their appearance in the
+command line.
+
+Using @option{--checkpoint-action} without @option{--checkpoint}
+assumes default checkpoint frequency of one checkpoint per 10 records.
+
+@opsummary{check-links}
@item --check-links
@itemx -l
If this option was given, @command{tar} will check the number of links
dumped for each processed file. If this number does not match the
total number of hard links for the file, a warning message will be
-output.
+output @footnote{Earlier versions of @GNUTAR{} understood @option{-l} as a
+synonym for @option{--one-file-system}. The current semantics, which
+complies to UNIX98, was introduced with version
+1.15.91. @xref{Changes}, for more information.}.
-Future versions will take @option{-l} as a short version of
-@option{--check-links}. However, current release still retains the old
-semantics for @option{-l}.
-
-@xref{Current status}, for more information.
+@xref{hard links}.
+@opsummary{compress}
+@opsummary{uncompress}
@item --compress
@itemx --uncompress
@itemx -Z
@command{tar} will use the @command{compress} program when reading or
writing the archive. This allows you to directly act on archives
-while saving space. @FIXME-xref{}
+while saving space. @xref{gzip}.
+@opsummary{confirmation}
@item --confirmation
-(See @option{--interactive}.) @FIXME-pxref{}
+(See @option{--interactive}.) @xref{interactive}.
+
+@opsummary{delay-directory-restore}
+@item --delay-directory-restore
+Delay setting modification times and permissions of extracted
+directories until the end of extraction. @xref{Directory Modification Times and Permissions}.
+
+@opsummary{dereference}
@item --dereference
@itemx -h
-When creating a @command{tar} archive, @command{tar} will archive the
-file that a symbolic link points to, rather than archiving the
-symlink. @FIXME-xref{}
+When reading or writing a file to be archived, @command{tar} accesses
+the file that a symbolic link points to, rather than the symlink
+itself. @xref{dereference}.
+@opsummary{directory}
@item --directory=@var{dir}
@itemx -C @var{dir}
When this option is specified, @command{tar} will change its current directory
to @var{dir} before performing any operations. When this option is used
-during archive creation, it is order sensitive. @FIXME-xref{}
+during archive creation, it is order sensitive. @xref{directory}.
+@opsummary{exclude}
@item --exclude=@var{pattern}
When performing operations, @command{tar} will skip files that match
-@var{pattern}. @FIXME-xref{}
+@var{pattern}. @xref{exclude}.
+
+@opsummary{exclude-backups}
+@item --exclude-backups
+Exclude backup and lock files. @xref{exclude,, exclude-backups}.
+@opsummary{exclude-from}
@item --exclude-from=@var{file}
@itemx -X @var{file}
Similar to @option{--exclude}, except @command{tar} will use the list of
-patterns in the file @var{file}. @FIXME-xref{}
+patterns in the file @var{file}. @xref{exclude}.
+@opsummary{exclude-caches}
@item --exclude-caches
-Automatically excludes all directories
-containing a cache directory tag. @FIXME-xref{}
+Exclude from dump any directory containing a valid cache directory
+tag file, but still dump the directory node and the tag file itself.
+@xref{exclude,, exclude-caches}.
+
+@opsummary{exclude-caches-under}
+@item --exclude-caches-under
+
+Exclude from dump any directory containing a valid cache directory
+tag file, but still dump the directory node itself.
+
+@xref{exclude}.
+
+@opsummary{exclude-caches-all}
+@item --exclude-caches-all
+
+Exclude from dump any directory containing a valid cache directory
+tag file. @xref{exclude}.
+
+@opsummary{exclude-tag}
+@item --exclude-tag=@var{file}
+
+Exclude from dump any directory containing file named @var{file}, but
+dump the directory node and @var{file} itself. @xref{exclude,, exclude-tag}.
+
+@opsummary{exclude-tag-under}
+@item --exclude-tag-under=@var{file}
+
+Exclude from dump the contents of any directory containing file
+named @var{file}, but dump the directory node itself. @xref{exclude,,
+exclude-tag-under}.
+
+@opsummary{exclude-tag-all}
+@item --exclude-tag-all=@var{file}
+
+Exclude from dump any directory containing file named @var{file}.
+@xref{exclude,,exclude-tag-all}.
+
+@opsummary{exclude-vcs}
+@item --exclude-vcs
+
+Exclude from dump directories and files, that are internal for some
+widely used version control systems.
+
+@xref{exclude,,exclude-vcs}.
+
+@opsummary{file}
@item --file=@var{archive}
@itemx -f @var{archive}
@command{tar} will use the file @var{archive} as the @command{tar} archive it
performs operations on, rather than @command{tar}'s compilation dependent
-default. @FIXME-xref{}
+default. @xref{file tutorial}.
+@opsummary{files-from}
@item --files-from=@var{file}
@itemx -T @var{file}
@command{tar} will use the contents of @var{file} as a list of archive members
or files to operate on, in addition to those specified on the
-command-line. @FIXME-xref{}
+command-line. @xref{files}.
+@opsummary{force-local}
@item --force-local
-Forces @command{tar} to interpret the filename given to @option{--file}
+Forces @command{tar} to interpret the file name given to @option{--file}
as a local file, even if it looks like a remote tape drive name.
-@FIXME-xref{}
+@xref{local and remote archives}.
+@opsummary{format}
@item --format=@var{format}
+@itemx -H @var{format}
Selects output archive format. @var{Format} may be one of the
following:
@xref{Formats}, for a detailed discussion of these formats.
+@opsummary{full-time}
+@item --full-time
+This option instructs @command{tar} to print file times to their full
+resolution. Usually this means 1-second resolution, but that depends
+on the underlying file system. The @option{--full-time} option takes
+effect only when detailed output (verbosity level 2 or higher) has
+been requested using the @option{--verbose} option, e.g., when listing
+or extracting archives:
+
+@smallexample
+$ @kbd{tar -t -v --full-time -f archive.tar}
+@end smallexample
+
+@noindent
+or, when creating an archive:
+
+@smallexample
+$ @kbd{tar -c -vv --full-time -f archive.tar .}
+@end smallexample
+
+Notice, thar when creating the archive you need to specify
+@option{--verbose} twice to get a detailed output (@pxref{verbose
+tutorial}).
+
+@opsummary{group}
@item --group=@var{group}
-Files added to the @command{tar} archive will have a group id of @var{group},
+Files added to the @command{tar} archive will have a group @acronym{ID} of @var{group},
rather than the group from the source file. @var{group} is first decoded
as a group symbolic name, but if this interpretation fails, it has to be
-a decimal numeric group ID. @FIXME-xref{}
+a decimal numeric group @acronym{ID}. @xref{override}.
-Also see the comments for the @value{op-owner} option.
+Also see the comments for the @option{--owner=@var{user}} option.
+@opsummary{gzip}
+@opsummary{gunzip}
+@opsummary{ungzip}
@item --gzip
@itemx --gunzip
@itemx --ungzip
This option tells @command{tar} to read or write archives through
@command{gzip}, allowing @command{tar} to directly operate on several
-kinds of compressed archives transparently. @FIXME-xref{}
+kinds of compressed archives transparently. @xref{gzip}.
+
+@opsummary{hard-dereference}
+@item --hard-dereference
+When creating an archive, dereference hard links and store the files
+they refer to, instead of creating usual hard link members.
+@xref{hard links}.
+
+@opsummary{help}
@item --help
+@itemx -?
@command{tar} will print out a short message summarizing the operations and
-options to @command{tar} and exit. @FIXME-xref{}
+options to @command{tar} and exit. @xref{help}.
+@opsummary{ignore-case}
@item --ignore-case
-Ignore case when excluding files.
-@FIXME-xref{}
+Ignore case when matching member or file names with
+patterns. @xref{controlling pattern-matching}.
+
+@opsummary{ignore-command-error}
+@item --ignore-command-error
+Ignore exit codes of subprocesses. @xref{Writing to an External Program}.
+@opsummary{ignore-failed-read}
@item --ignore-failed-read
Do not exit unsuccessfully merely because an unreadable file was encountered.
@xref{Reading}.
+@opsummary{ignore-zeros}
@item --ignore-zeros
@itemx -i
With this option, @command{tar} will ignore zeroed blocks in the
archive, which normally signals EOF. @xref{Reading}.
+@opsummary{incremental}
@item --incremental
@itemx -G
-Used to inform @command{tar} that it is working with an old
+Informs @command{tar} that it is working with an old
@acronym{GNU}-format incremental backup archive. It is intended
-primarily for backwards compatibility only. @FIXME{incremental and
-listed-incremental}.
+primarily for backwards compatibility only. @xref{Incremental Dumps},
+for a detailed discussion of incremental archives.
+@opsummary{index-file}
@item --index-file=@var{file}
Send verbose output to @var{file} instead of to standard output.
+@opsummary{info-script}
+@opsummary{new-volume-script}
@item --info-script=@var{script-file}
@itemx --new-volume-script=@var{script-file}
@itemx -F @var{script-file}
When @command{tar} is performing multi-tape backups, @var{script-file} is run
at the end of each tape. If @var{script-file} exits with nonzero status,
-@command{tar} fails immediately. @FIXME-xref{}
+@command{tar} fails immediately. @xref{info-script}, for a detailed
+discussion of @var{script-file}.
+@opsummary{interactive}
@item --interactive
@itemx --confirmation
@itemx -w
Specifies that @command{tar} should ask the user for confirmation before
performing potentially destructive options, such as overwriting files.
-@FIXME-xref{}
+@xref{interactive}.
+@opsummary{keep-newer-files}
@item --keep-newer-files
Do not replace existing files that are newer than their archive copies
when extracting files from an archive.
+@opsummary{keep-old-files}
@item --keep-old-files
@itemx -k
Do not overwrite existing files when extracting files from an archive.
-@xref{Writing}.
+@xref{Keep Old Files}.
+@opsummary{label}
@item --label=@var{name}
@itemx -V @var{name}
When creating an archive, instructs @command{tar} to write @var{name}
as a name record in the archive. When extracting or listing archives,
@command{tar} will only operate on archives that have a label matching
-the pattern specified in @var{name}. @FIXME-xref{}
+the pattern specified in @var{name}. @xref{Tape Files}.
+@opsummary{level}
+@item --level=@var{n}
+Force incremental backup of level @var{n}. As of @GNUTAR version
+@value{VERSION}, the option @option{--level=0} truncates the snapshot
+file, thereby forcing the level 0 dump. Other values of @var{n} are
+effectively ignored. @xref{--level=0}, for details and examples.
+
+The use of this option is valid only in conjunction with the
+@option{--listed-incremental} option. @xref{Incremental Dumps},
+for a detailed description.
+
+@opsummary{listed-incremental}
@item --listed-incremental=@var{snapshot-file}
@itemx -g @var{snapshot-file}
@command{tar} creates is a new @acronym{GNU}-format incremental
backup, using @var{snapshot-file} to determine which files to backup.
With other operations, informs @command{tar} that the archive is in
-incremental format. @FIXME{incremental and listed-incremental}.
+incremental format. @xref{Incremental Dumps}.
+
+@opsummary{lzip}
+@item --lzip
+
+This option tells @command{tar} to read or write archives through
+@command{lzip}. @xref{gzip}.
+
+@opsummary{lzma}
+@item --lzma
+
+This option tells @command{tar} to read or write archives through
+@command{lzma}. @xref{gzip}.
+@item --lzop
+
+This option tells @command{tar} to read or write archives through
+@command{lzop}. @xref{gzip}.
+
+@opsummary{mode}
@item --mode=@var{permissions}
When adding files to an archive, @command{tar} will use
@var{permissions} for the archive members, rather than the permissions
-from the files. The program @command{chmod} and this @command{tar}
-option share the same syntax for what @var{permissions} might be.
-@xref{File permissions, Permissions, File permissions, fileutils,
-@acronym{GNU} file utilities}. This reference also has useful
-information for those not being overly familiar with the Unix
-permission system.
-
-Of course, @var{permissions} might be plainly specified as an octal number.
-However, by using generic symbolic modifications to mode bits, this allows
-more flexibility. For example, the value @samp{a+rw} adds read and write
-permissions for everybody, while retaining executable bits on directories
-or on any other file already marked as executable.
+from the files. @var{permissions} can be specified either as an octal
+number or as symbolic permissions, like with
+@command{chmod}. @xref{override}.
+
+@opsummary{mtime}
+@item --mtime=@var{date}
+When adding files to an archive, @command{tar} will use @var{date} as
+the modification time of members when creating archives, instead of
+their actual modification times. The value of @var{date} can be
+either a textual date representation (@pxref{Date input formats}) or a
+name of the existing file, starting with @samp{/} or @samp{.}. In the
+latter case, the modification time of that file is used. @xref{override}.
+
+@opsummary{multi-volume}
@item --multi-volume
@itemx -M
Informs @command{tar} that it should create or otherwise operate on a
-multi-volume @command{tar} archive. @FIXME-xref{}
+multi-volume @command{tar} archive. @xref{Using Multiple Tapes}.
+@opsummary{new-volume-script}
@item --new-volume-script
-(see --info-script)
-
-@item -n
-@itemx --seek
-
-Assume that the archive media supports seeks to arbitrary
-locations. Usually @command{tar} determines automatically whether
-the archive can be seeked or not. This option is intended for use
-in cases when such recognition fails.
+(see @option{--info-script})
+@opsummary{newer}
@item --newer=@var{date}
@itemx --after-date=@var{date}
@itemx -N
When creating an archive, @command{tar} will only add files that have changed
since @var{date}. If @var{date} begins with @samp{/} or @samp{.}, it
is taken to be the name of a file whose data modification time specifies
-the date. @FIXME-xref{}
+the date. @xref{after}.
+@opsummary{newer-mtime}
@item --newer-mtime=@var{date}
Like @option{--newer}, but add only files whose
contents have changed (as opposed to just @option{--newer}, which will
-also back up files for which any status information has changed).
+also back up files for which any status information has
+changed). @xref{after}.
+@opsummary{no-anchored}
@item --no-anchored
An exclude pattern can match any subsequence of the name's components.
-@FIXME-xref{}
+@xref{controlling pattern-matching}.
+@opsummary{no-auto-compress}
+@item --no-auto-compress
+
+Disables automatic compressed format recognition based on the archive
+suffix. @xref{--auto-compress}. @xref{gzip}.
+
+@opsummary{no-check-device}
+@item --no-check-device
+Do not check device numbers when creating a list of modified files
+for incremental archiving. @xref{device numbers}, for
+a detailed description.
+
+@opsummary{no-delay-directory-restore}
+@item --no-delay-directory-restore
+
+Modification times and permissions of extracted
+directories are set when all files from this directory have been
+extracted. This is the default.
+@xref{Directory Modification Times and Permissions}.
+
+@opsummary{no-ignore-case}
@item --no-ignore-case
-Use case-sensitive matching when excluding files.
-@FIXME-xref{}
+Use case-sensitive matching.
+@xref{controlling pattern-matching}.
+
+@opsummary{no-ignore-command-error}
+@item --no-ignore-command-error
+Print warnings about subprocesses that terminated with a nonzero exit
+code. @xref{Writing to an External Program}.
+
+@opsummary{no-null}
+@item --no-null
+
+If the @option{--null} option was given previously, this option
+cancels its effect, so that any following @option{--files-from}
+options will expect their file lists to be newline-terminated.
+@opsummary{no-overwrite-dir}
+@item --no-overwrite-dir
+
+Preserve metadata of existing directories when extracting files
+from an archive. @xref{Overwrite Old Files}.
+
+@opsummary{no-quote-chars}
+@item --no-quote-chars=@var{string}
+Remove characters listed in @var{string} from the list of quoted
+characters set by the previous @option{--quote-chars} option
+(@pxref{quoting styles}).
+
+@opsummary{no-recursion}
@item --no-recursion
With this option, @command{tar} will not recurse into directories.
-@FIXME-xref{}
+@xref{recurse}.
+@opsummary{no-same-owner}
@item --no-same-owner
@itemx -o
specified in the @command{tar} archive. This the default behavior
for ordinary users.
+@opsummary{no-same-permissions}
@item --no-same-permissions
When extracting an archive, subtract the user's umask from files from
the permissions specified in the archive. This is the default behavior
for ordinary users.
+@opsummary{no-seek}
+@item --no-seek
+
+The archive media does not support seeks to arbitrary
+locations. Usually @command{tar} determines automatically whether
+the archive can be seeked or not. Use this option to disable this
+mechanism.
+
+@opsummary{no-unquote}
+@item --no-unquote
+Treat all input file or member names literally, do not interpret
+escape sequences. @xref{input name quoting}.
+
+@opsummary{no-wildcards}
@item --no-wildcards
-Do not use wildcards when excluding files.
-@FIXME-xref{}
+Do not use wildcards.
+@xref{controlling pattern-matching}.
+@opsummary{no-wildcards-match-slash}
@item --no-wildcards-match-slash
-Wildcards do not match @samp{/} when excluding files.
-@FIXME-xref{}
+Wildcards do not match @samp{/}.
+@xref{controlling pattern-matching}.
+@opsummary{null}
@item --null
When @command{tar} is using the @option{--files-from} option, this option
-instructs @command{tar} to expect filenames terminated with @option{NUL}, so
+instructs @command{tar} to expect file names terminated with @acronym{NUL}, so
@command{tar} can correctly work with file names that contain newlines.
-@FIXME-xref{}
+@xref{nul}.
+@opsummary{numeric-owner}
@item --numeric-owner
This option will notify @command{tar} that it should use numeric user
and group IDs when creating a @command{tar} file, rather than names.
-@FIXME-xref{}
+@xref{Attributes}.
@item -o
-When extracting files, this option is a synonym for
-@option{--no-same-owner}, i.e. it prevents @command{tar} from
+The function of this option depends on the action @command{tar} is
+performing. When extracting files, @option{-o} is a synonym for
+@option{--no-same-owner}, i.e., it prevents @command{tar} from
restoring ownership of files being extracted.
-When creating an archive, @option{-o} is a synonym for
+When creating an archive, it is a synonym for
@option{--old-archive}. This behavior is for compatibility
with previous versions of @GNUTAR{}, and will be
-removed in the future releases.
+removed in future releases.
-@xref{Current status}, for more information.
+@xref{Changes}, for more information.
+@opsummary{occurrence}
@item --occurrence[=@var{number}]
This option can be used in conjunction with one of the subcommands
@end smallexample
@noindent
-will extract the first occurrence of @file{filename} from @file{archive.tar}
+will extract the first occurrence of the member @file{filename} from @file{archive.tar}
and will terminate without scanning to the end of the archive.
+@opsummary{old-archive}
@item --old-archive
Synonym for @option{--format=v7}.
+@opsummary{one-file-system}
@item --one-file-system
-@itemx -l
Used when creating an archive. Prevents @command{tar} from recursing into
directories that are on different file systems from the current
directory.
-Earlier versions of @GNUTAR{} understood @option{-l} as a
-synonym for @option{--one-file-system}. Although such usage is still
-allowed in the present version, it is @emph{strongly discouraged}.
-The future versions of @GNUTAR{} will use @option{-l} as
-a synonym for @option{--check-links}.
-
-@xref{Current status}, for more information.
-
+@opsummary{overwrite}
@item --overwrite
Overwrite existing files and directory metadata when extracting files
from an archive. @xref{Overwrite Old Files}.
+@opsummary{overwrite-dir}
@item --overwrite-dir
Overwrite the metadata of existing directories when extracting files
from an archive. @xref{Overwrite Old Files}.
+@opsummary{owner}
@item --owner=@var{user}
Specifies that @command{tar} should use @var{user} as the owner of members
when creating archives, instead of the user associated with the source
file. @var{user} is first decoded as a user symbolic name, but if
-this interpretation fails, it has to be a decimal numeric user ID.
-@FIXME-xref{}
-
-There is no value indicating a missing number, and @samp{0} usually means
-@code{root}. Some people like to force @samp{0} as the value to offer in
-their distributions for the owner of files, because the @code{root} user is
-anonymous anyway, so that might as well be the owner of anonymous archives.
+this interpretation fails, it has to be a decimal numeric user @acronym{ID}.
+@xref{override}.
This option does not affect extraction from archives.
+@opsummary{pax-option}
@item --pax-option=@var{keyword-list}
-
-This option is meaningful only with @acronym{POSIX.1-2001} archives
-(@FIXME-xref{}). It modifies the way @command{tar} handles the
+This option enables creation of the archive in @acronym{POSIX.1-2001}
+format (@pxref{posix}) and modifies the way @command{tar} handles the
extended header keywords. @var{Keyword-list} is a comma-separated
-list of keyword options, each keyword option taking one of
-the following forms:
+list of keyword options. @xref{PAX keywords}, for a detailed
+discussion.
-@table @asis
-@item delete=@var{pattern}
-When used with one of archive-creation command (@FIXME-xref{}),
-this option instructs @command{tar} to omit from extended header records
-that it produces any keywords matching the string @var{pattern}.
+@opsummary{portability}
+@item --portability
+@itemx --old-archive
+Synonym for @option{--format=v7}.
-When used in extract or list mode, this option instructs tar
-to ignore any keywords matching the given @var{pattern} in the extended
-header records. In both cases, matching is performed using the pattern
-matching notation described in @acronym{POSIX 1003.2}, 3.13 @FIXME-xref{see
-man 7 glob}. For example:
+@opsummary{posix}
+@item --posix
+Same as @option{--format=posix}.
-@smallexample
---pax-option delete=security.*
-@end smallexample
+@opsummary{preserve}
+@item --preserve
-would suppress security-related information.
+Synonymous with specifying both @option{--preserve-permissions} and
+@option{--same-order}. @xref{Setting Access Permissions}.
-@item exthdr.name=@var{string}
+@opsummary{preserve-order}
+@item --preserve-order
-This keyword allows user control over the name that is written into the
-ustar header blocks for the extended headers. The name is obtained
-from @var{string} after substituting the following meta-characters:
+(See @option{--same-order}; @pxref{Reading}.)
-@multitable @columnfractions .30 .70
-@headitem Meta-character @tab Replaced By
-@item %d @tab The directory name of the file, equivalent to the
-result of the @command{dirname} utility on the translated pathname.
-@item %f @tab The filename of the file, equivalent to the result
-of the @command{basename} utility on the translated pathname.
-@item %p @tab The process ID of the @command{tar} process.
-@item %% @tab A @samp{%} character.
-@end multitable
+@opsummary{preserve-permissions}
+@opsummary{same-permissions}
+@item --preserve-permissions
+@itemx --same-permissions
+@itemx -p
-Any other @samp{%} characters in @var{string} produce undefined
-results.
-
-If no option @samp{exthdr.name=string} is specified, @command{tar}
-will use the following default value:
-
-@smallexample
-%d/PaxHeaders.%p/%f
-@end smallexample
-
-@item globexthdr.name=@var{string}
-This keyword allows user control over the name that is written into
-the ustar header blocks for global extended header records. The name
-shall will be obtained from the contents of @var{string}, after the
-following character substitutions have been made:
-
-@multitable @columnfractions .30 .70
-@headitem Meta-character @tab Replaced By
-@item %n @tab An integer that represents the
-sequence number of the global extended header record in the archive,
-starting at 1.
-@item %p @tab The process ID of the @command{tar} process.
-@item %% @tab A @samp{%} character.
-@end multitable
-
-Any other @samp{%} characters in string produce undefined results.
-
-If no option @samp{globexthdr.name=string} is specified, @command{tar}
-will use the following default value:
-
-@smallexample
-$TMPDIR/GlobalHead.%p.%n
-@end smallexample
-
-@noindent
-where @samp{$TMPDIR} represents the value of the @var{TMPDIR}
-environment variable. If @var{TMPDIR} is not set, @command{tar}
-uses @samp{/tmp}.
-
-@item @var{keyword}=@var{value}
-When used with one of archive-creation commands, these keyword/value pairs
-will be included at the beginning of the archive in a global extended
-header record. When used with one of archive-reading commands,
-@command{tar} will behave as if it has encountered these keyword/value
-pairs at the beginning of the archive in a global extended header
-record.
-
-@item @var{keyword}:=@var{value}
-When used with one of archive-creation commands, these keyword/value pairs
-will be included as records at the beginning of an extended header for
-each file. This is effectively equivalent to @var{keyword}=@var{value}
-form except that it creates no global extended header records.
-
-When used with one of archive-reading commands, @command{tar} will
-behave as if these keyword/value pairs were included as records at the
-end of each extended header; thus, they will override any global or
-file-specific extended header record keywords of the same names.
-For example, in the command:
-
-@smallexample
-tar --format=posix --create \
- --file archive --pax-option gname:=user .
-@end smallexample
-
-the group name will be forced to a new value for all files
-stored in the archive.
-@end table
-
-@item --portability
-@itemx --old-archive
-Synonym for @option{--format=v7}.
-
-@item --posix
-Same as @option{--format=posix}.
-
-@item --preserve
-
-Synonymous with specifying both @option{--preserve-permissions} and
-@option{--same-order}. @FIXME-xref{}
-
-@item --preserve-order
-
-(See @option{--same-order}; @pxref{Reading}.)
-
-@item --preserve-permissions
-@itemx --same-permissions
-@itemx -p
-
-When @command{tar} is extracting an archive, it normally subtracts the
-users' umask from the permissions specified in the archive and uses
-that number as the permissions to create the destination file.
-Specifying this option instructs @command{tar} that it should use the
-permissions directly from the archive. @xref{Writing}.
-
-@item --read-full-records
-@itemx -B
+When @command{tar} is extracting an archive, it normally subtracts the
+users' umask from the permissions specified in the archive and uses
+that number as the permissions to create the destination file.
+Specifying this option instructs @command{tar} that it should use the
+permissions directly from the archive. @xref{Setting Access Permissions}.
+
+@opsummary{quote-chars}
+@item --quote-chars=@var{string}
+Always quote characters from @var{string}, even if the selected
+quoting style would not quote them (@pxref{quoting styles}).
+
+@opsummary{quoting-style}
+@item --quoting-style=@var{style}
+Set quoting style to use when printing member and file names
+(@pxref{quoting styles}). Valid @var{style} values are:
+@code{literal}, @code{shell}, @code{shell-always}, @code{c},
+@code{escape}, @code{locale}, and @code{clocale}. Default quoting
+style is @code{escape}, unless overridden while configuring the
+package.
+
+@opsummary{read-full-records}
+@item --read-full-records
+@itemx -B
Specifies that @command{tar} should reblock its input, for reading
from pipes on systems with buggy implementations. @xref{Reading}.
-@item --record-size=@var{size}
+@opsummary{record-size}
+@item --record-size=@var{size}[@var{suf}]
Instructs @command{tar} to use @var{size} bytes per record when accessing the
-archive. @FIXME-xref{}
+archive. The argument can be suffixed with a @dfn{size suffix}, e.g.
+@option{--record-size=10K} for 10 Kilobytes. @xref{size-suffixes},
+for a list of valid suffixes. @xref{Blocking Factor}, for a detailed
+description of this option.
+@opsummary{recursion}
@item --recursion
-With this option, @command{tar} recurses into directories.
-@FIXME-xref{}
+With this option, @command{tar} recurses into directories (default).
+@xref{recurse}.
+@opsummary{recursive-unlink}
@item --recursive-unlink
Remove existing
directory hierarchies before extracting directories of the same name
-from the archive. @xref{Writing}.
+from the archive. @xref{Recursive Unlink}.
+@opsummary{remove-files}
@item --remove-files
Directs @command{tar} to remove the source file from the file system after
-appending it to an archive. @FIXME-xref{}
+appending it to an archive. @xref{remove files}.
+
+@opsummary{restrict}
+@item --restrict
+Disable use of some potentially harmful @command{tar} options.
+Currently this option disables shell invocation from multi-volume menu
+(@pxref{Using Multiple Tapes}).
+
+@opsummary{rmt-command}
@item --rmt-command=@var{cmd}
Notifies @command{tar} that it should use @var{cmd} instead of
the default @file{/usr/libexec/rmt} (@pxref{Remote Tape Server}).
+@opsummary{rsh-command}
@item --rsh-command=@var{cmd}
Notifies @command{tar} that is should use @var{cmd} to communicate with remote
-devices. @FIXME-xref{}
+devices. @xref{Device}.
+@opsummary{same-order}
@item --same-order
@itemx --preserve-order
@itemx -s
arguments has already been sorted to match the order of files in the
archive. @xref{Reading}.
+@opsummary{same-owner}
@item --same-owner
When extracting an archive, @command{tar} will attempt to preserve the owner
specified in the @command{tar} archive with this option present.
This is the default behavior for the superuser; this option has an
-effect only for ordinary users. @FIXME-xref{}
+effect only for ordinary users. @xref{Attributes}.
+@opsummary{same-permissions}
@item --same-permissions
-(See @option{--preserve-permissions}; @pxref{Writing}.)
+(See @option{--preserve-permissions}; @pxref{Setting Access Permissions}.)
+
+@opsummary{seek}
+@item --seek
+@itemx -n
+
+Assume that the archive media supports seeks to arbitrary
+locations. Usually @command{tar} determines automatically whether
+the archive can be seeked or not. This option is intended for use
+in cases when such recognition fails. It takes effect only if the
+archive is open for reading (e.g. with @option{--list} or
+@option{--extract} options).
+@opsummary{show-defaults}
@item --show-defaults
Displays the default options used by @command{tar} and exits
Here is an example of what you can see using this option:
@smallexample
-$ tar --show-defaults
---format=gnu -f- -b20
+$ @kbd{tar --show-defaults}
+--format=gnu -f- -b20 --quoting-style=escape
+--rmt-command=/usr/libexec/rmt --rsh-command=/usr/bin/rsh
@end smallexample
+@noindent
+Notice, that this option outputs only one line. The example output
+above has been split to fit page boundaries.
+
+@opsummary{show-omitted-dirs}
@item --show-omitted-dirs
-Instructs @command{tar} to mention directories its skipping over when
-operating on a @command{tar} archive. @FIXME-xref{}
+Instructs @command{tar} to mention the directories it is skipping when
+operating on a @command{tar} archive. @xref{show-omitted-dirs}.
-@item --show-stored-names
+@opsummary{show-transformed-names}
+@opsummary{show-stored-names}
+@item --show-transformed-names
+@itemx --show-stored-names
-This option has effect only when used in conjunction with one of
-archive creation operations. It instructs tar to list the member names
-stored in the archive, as opposed to the actual file
+Display file or member names after applying any transformations
+(@pxref{transform}). In particular, when used in conjunction with one of
+the archive creation operations it instructs @command{tar} to list the
+member names stored in the archive, as opposed to the actual file
names. @xref{listing member and file names}.
+@opsummary{sparse}
@item --sparse
@itemx -S
Invokes a @acronym{GNU} extension when adding files to an archive that handles
-sparse files efficiently. @FIXME-xref{}
+sparse files efficiently. @xref{sparse}.
+
+@opsummary{sparse-version}
+@item --sparse-version=@var{version}
+Specifies the @dfn{format version} to use when archiving sparse
+files. Implies @option{--sparse}. @xref{sparse}. For the description
+of the supported sparse formats, @xref{Sparse Formats}.
+
+@opsummary{starting-file}
@item --starting-file=@var{name}
@itemx -K @var{name}
files in the archive until it finds one that matches @var{name}.
@xref{Scarce}.
+@opsummary{strip-components}
@item --strip-components=@var{number}
Strip given @var{number} of leading components from file names before
-extraction.@footnote{This option was called @option{--strip-path} in
-version 1.14.} For example, if archive @file{archive.tar} contained
+extraction. For example, if archive @file{archive.tar} contained
@file{/some/file/name}, then running
@smallexample
@end smallexample
@noindent
-would extracted this file to file @file{name}.
+would extract this file to file @file{name}.
+@opsummary{suffix}
@item --suffix=@var{suffix}
Alters the suffix @command{tar} uses when backing up files from the default
-@samp{~}. @FIXME-xref{}
+@samp{~}. @xref{backup}.
-@item --tape-length=@var{num}
-@itemx -L @var{num}
+@opsummary{tape-length}
+@item --tape-length=@var{num}[@var{suf}]
+@itemx -L @var{num}[@var{suf}]
Specifies the length of tapes that @command{tar} is writing as being
-@w{@var{num} x 1024} bytes long. @FIXME-xref{}
+@w{@var{num} x 1024} bytes long. If optional @var{suf} is given, it
+specifies a multiplicative factor to be used instead of 1024. For
+example, @samp{-L2M} means 2 megabytes. @xref{size-suffixes}, for a
+list of allowed suffixes. @xref{Using Multiple Tapes}, for a detailed
+discussion of this option.
+@opsummary{test-label}
@item --test-label
Reads the volume label. If an argument is specified, test whether it
matches the volume label. @xref{--test-label option}.
+@opsummary{to-command}
+@item --to-command=@var{command}
+
+During extraction @command{tar} will pipe extracted files to the
+standard input of @var{command}. @xref{Writing to an External Program}.
+
+@opsummary{to-stdout}
@item --to-stdout
@itemx -O
During extraction, @command{tar} will extract files to stdout rather
-than to the file system. @xref{Writing}.
+than to the file system. @xref{Writing to Standard Output}.
-@item --totals
+@opsummary{totals}
+@item --totals[=@var{signo}]
-Displays the total number of bytes written after creating an archive.
-@FIXME-xref{}
+Displays the total number of bytes transferred when processing an
+archive. If an argument is given, these data are displayed on
+request, when signal @var{signo} is delivered to @command{tar}.
+@xref{totals}.
+@opsummary{touch}
@item --touch
@itemx -m
Sets the data modification time of extracted files to the extraction time,
rather than the data modification time stored in the archive.
-@xref{Writing}.
+@xref{Data Modification Times}.
+
+@opsummary{transform}
+@opsummary{xform}
+@item --transform=@var{sed-expr}
+@itemx --xform=@var{sed-expr}
+Transform file or member names using @command{sed} replacement expression
+@var{sed-expr}. For example,
+
+@smallexample
+$ @kbd{tar cf archive.tar --transform 's,^\./,usr/,' .}
+@end smallexample
+
+@noindent
+will add to @file{archive} files from the current working directory,
+replacing initial @samp{./} prefix with @samp{usr/}. For the detailed
+discussion, @xref{transform}.
+
+To see transformed member names in verbose listings, use
+@option{--show-transformed-names} option
+(@pxref{show-transformed-names}).
+@opsummary{uncompress}
@item --uncompress
-(See @option{--compress}.) @FIXME-pxref{}
+(See @option{--compress}, @pxref{gzip})
+@opsummary{ungzip}
@item --ungzip
-(See @option{--gzip}.) @FIXME-pxref{}
+(See @option{--gzip}, @pxref{gzip})
+@opsummary{unlink-first}
@item --unlink-first
@itemx -U
Directs @command{tar} to remove the corresponding file from the file
-system before extracting it from the archive. @xref{Writing}.
+system before extracting it from the archive. @xref{Unlink First}.
+@opsummary{unquote}
+@item --unquote
+Enable unquoting input file or member names (default). @xref{input
+name quoting}.
+
+@opsummary{use-compress-program}
@item --use-compress-program=@var{prog}
+@itemx -I=@var{prog}
Instructs @command{tar} to access the archive through @var{prog}, which is
-presumed to be a compression program of some sort. @FIXME-xref{}
+presumed to be a compression program of some sort. @xref{gzip}.
+@opsummary{utc}
@item --utc
Display file modification dates in @acronym{UTC}. This option implies
@option{--verbose}.
+@opsummary{verbose}
@item --verbose
@itemx -v
-Specifies that @command{tar} should be more verbose about the operations its
-performing. This option can be specified multiple times for some
-operations to increase the amount of information displayed. @FIXME-xref{}
+Specifies that @command{tar} should be more verbose about the
+operations it is performing. This option can be specified multiple
+times for some operations to increase the amount of information displayed.
+@xref{verbose}.
+@opsummary{verify}
@item --verify
@itemx -W
Verifies that the archive was correctly written when creating an
-archive. @FIXME-xref{}
+archive. @xref{verify}.
+@opsummary{version}
@item --version
-@command{tar} will print an informational message about what version
-it is and a copyright message, some credits, and then exit.
-@FIXME-xref{}
+Print information about the program's name, version, origin and legal
+status, all on standard output, and then exit successfully.
+@xref{help}.
+@opsummary{volno-file}
@item --volno-file=@var{file}
-Used in conjunction with @option{--multi-volume}. @command{tar} will keep track
-of which volume of a multi-volume archive its working in @var{file}.
-@FIXME-xref{}
+Used in conjunction with @option{--multi-volume}. @command{tar} will
+keep track of which volume of a multi-volume archive it is working in
+@var{file}. @xref{volno-file}.
+
+@opsummary{warning}
+@item --warning=@var{keyword}
+Enable or disable warning messages identified by @var{keyword}. The
+messages are suppressed if @var{keyword} is prefixed with @samp{no-}.
+@xref{warnings}.
+
+@opsummary{wildcards}
@item --wildcards
-Use wildcards when excluding files.
-@FIXME-xref{}
+Use wildcards when matching member names with patterns.
+@xref{controlling pattern-matching}.
+@opsummary{wildcards-match-slash}
@item --wildcards-match-slash
-Wildcards match @samp{/} when excluding files.
-@FIXME-xref{}
+Wildcards match @samp{/}.
+@xref{controlling pattern-matching}.
+
+@opsummary{xz}
+@item --xz
+@itemx -J
+Use @command{xz} for compressing or decompressing the archives. @xref{gzip}.
+
@end table
@node Short Option Summary
Here is an alphabetized list of all of the short option forms, matching
them with the equivalent long option.
-@table @option
-
-@item -A
-
-@option{--concatenate}
-
-@item -B
-
-@option{--read-full-records}
-
-@item -C
-
-@option{--directory}
-
-@item -F
-
-@option{--info-script}
-
-@item -G
-
-@option{--incremental}
-
-@item -K
-
-@option{--starting-file}
-
-@item -L
+@multitable @columnfractions 0.20 0.80
+@headitem Short Option @tab Reference
-@option{--tape-length}
+@item -A @tab @ref{--concatenate}.
-@item -M
-
-@option{--multi-volume}
-
-@item -N
-
-@option{--newer}
-
-@item -O
-
-@option{--to-stdout}
-
-@item -P
-
-@option{--absolute-names}
-
-@item -R
-
-@option{--block-number}
-
-@item -S
-
-@option{--sparse}
-
-@item -T
-
-@option{--files-from}
-
-@item -U
+@item -B @tab @ref{--read-full-records}.
-@option{--unlink-first}
+@item -C @tab @ref{--directory}.
-@item -V
-
-@option{--label}
-
-@item -W
+@item -F @tab @ref{--info-script}.
-@option{--verify}
+@item -G @tab @ref{--incremental}.
-@item -X
+@item -J @tab @ref{--xz}.
-@option{--exclude-from}
+@item -K @tab @ref{--starting-file}.
-@item -Z
-
-@option{--compress}
+@item -L @tab @ref{--tape-length}.
-@item -b
+@item -M @tab @ref{--multi-volume}.
-@option{--blocking-factor}
+@item -N @tab @ref{--newer}.
-@item -c
+@item -O @tab @ref{--to-stdout}.
-@option{--create}
+@item -P @tab @ref{--absolute-names}.
-@item -d
+@item -R @tab @ref{--block-number}.
-@option{--compare}
-
-@item -f
+@item -S @tab @ref{--sparse}.
-@option{--file}
+@item -T @tab @ref{--files-from}.
-@item -g
+@item -U @tab @ref{--unlink-first}.
-@option{--listed-incremental}
+@item -V @tab @ref{--label}.
-@item -h
+@item -W @tab @ref{--verify}.
-@option{--dereference}
+@item -X @tab @ref{--exclude-from}.
-@item -i
+@item -Z @tab @ref{--compress}.
-@option{--ignore-zeros}
+@item -b @tab @ref{--blocking-factor}.
-@item -j
+@item -c @tab @ref{--create}.
-@option{--bzip2}
+@item -d @tab @ref{--compare}.
-@item -k
+@item -f @tab @ref{--file}.
-@option{--keep-old-files}
+@item -g @tab @ref{--listed-incremental}.
-@item -l
+@item -h @tab @ref{--dereference}.
-@option{--one-file-system}. Use of this short option is deprecated. It
-is retained for compatibility with the earlier versions of GNU
-@command{tar}, and will be changed in future releases.
+@item -i @tab @ref{--ignore-zeros}.
-@xref{Current status}, for more information.
+@item -j @tab @ref{--bzip2}.
-@item -m
+@item -k @tab @ref{--keep-old-files}.
-@option{--touch}
+@item -l @tab @ref{--check-links}.
-@item -o
+@item -m @tab @ref{--touch}.
-When creating --- @option{--no-same-owner}, when extracting ---
-@option{--portability}.
+@item -o @tab When creating, @ref{--no-same-owner}, when extracting ---
+@ref{--portability}.
-The later usage is deprecated. It is retained for compatibility with
-the earlier versions of @GNUTAR{}. In the future releases
+The latter usage is deprecated. It is retained for compatibility with
+the earlier versions of @GNUTAR{}. In future releases
@option{-o} will be equivalent to @option{--no-same-owner} only.
-@item -p
-
-@option{--preserve-permissions}
-
-@item -r
+@item -p @tab @ref{--preserve-permissions}.
-@option{--append}
+@item -r @tab @ref{--append}.
-@item -s
+@item -s @tab @ref{--same-order}.
-@option{--same-order}
+@item -t @tab @ref{--list}.
-@item -t
+@item -u @tab @ref{--update}.
-@option{--list}
+@item -v @tab @ref{--verbose}.
-@item -u
+@item -w @tab @ref{--interactive}.
-@option{--update}
+@item -x @tab @ref{--extract}.
-@item -v
+@item -z @tab @ref{--gzip}.
-@option{--verbose}
-
-@item -w
-
-@option{--interactive}
-
-@item -x
-
-@option{--extract}
-
-@item -z
-
-@option{--gzip}
-
-@end table
+@end multitable
@node help
@section @GNUTAR{} documentation
+@cindex Getting program version number
+@opindex version
+@cindex Version of the @command{tar} program
Being careful, the first thing is really checking that you are using
-@GNUTAR{}, indeed. The @value{op-version} option
-will generate a message giving confirmation that you are using
-@GNUTAR{}, with the precise version of @GNUTAR{}
-you are using. @command{tar} identifies itself and
-prints the version number to the standard output, then immediately
-exits successfully, without doing anything else, ignoring all other
-options. For example, @w{@samp{tar --version}} might return:
+@GNUTAR{}, indeed. The @option{--version} option
+causes @command{tar} to print information about its name, version,
+origin and legal status, all on standard output, and then exit
+successfully. For example, @w{@samp{tar --version}} might print:
@smallexample
-tar (@acronym{GNU} tar) @value{VERSION}
+tar (GNU tar) @value{VERSION}
+Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by John Gilmore and Jay Fenlason.
@end smallexample
@noindent
contains@footnote{There are plans to merge the @command{cpio} and
@command{tar} packages into a single one which would be called
@code{paxutils}. So, who knows if, one of this days, the
-@value{op-version} would not yield @w{@samp{tar (@acronym{GNU}
-paxutils) 3.2}}}.
+@option{--version} would not output @w{@samp{tar (@acronym{GNU}
+paxutils) 3.2}}.}.
+@cindex Obtaining help
+@cindex Listing all @command{tar} options
+@xopindex{help, introduction}
Another thing you might want to do is checking the spelling or meaning
of some particular @command{tar} option, without resorting to this
manual, for once you have carefully read it. @GNUTAR{}
has a short help feature, triggerable through the
-@value{op-help} option. By using this option, @command{tar} will
+@option{--help} option. By using this option, @command{tar} will
print a usage message listing all available options on standard
output, then exit successfully, without doing anything else and
ignoring all other options. Even if this is only a brief summary, it
presuming, here, that you like using @command{less} for a pager. Other
popular pagers are @command{more} and @command{pg}. If you know about some
@var{keyword} which interests you and do not want to read all the
-@value{op-help} output, another common idiom is doing:
+@option{--help} output, another common idiom is doing:
@smallexample
tar --help | grep @var{keyword}
@end smallexample
@noindent
-for getting only the pertinent lines.
+for getting only the pertinent lines. Notice, however, that some
+@command{tar} options have long description lines and the above
+command will list only the first of them.
-The perceptive reader would have noticed some contradiction in the
-previous paragraphs. It is written that both @value{op-version} and
-@value{op-help} print something, and have all other options ignored. In
-fact, they cannot ignore each other, and one of them has to win. We do
-not specify which is stronger, here; experiment if you really wonder!
+The exact look of the option summary displayed by @kbd{tar --help} is
+configurable. @xref{Configuring Help Summary}, for a detailed description.
+
+@opindex usage
+If you only wish to check the spelling of an option, running @kbd{tar
+--usage} may be a better choice. This will display a terse list of
+@command{tar} options without accompanying explanations.
The short help output is quite succinct, and you might have to get
back to the full documentation for precise points. If you are reading
this paragraph, you already have the @command{tar} manual in some
-form. This manual is available in printed form, as a kind of small
-book. It may printed out of the @GNUTAR{}
+form. This manual is available in a variety of forms from
+@url{http://www.gnu.org/software/tar/manual}. It may be printed out of the @GNUTAR{}
distribution, provided you have @TeX{} already installed somewhere,
and a laser printer around. Just configure the distribution, execute
the command @w{@samp{make dvi}}, then print @file{doc/tar.dvi} the
There is currently no @code{man} page for @GNUTAR{}.
If you observe such a @code{man} page on the system you are running,
-either it does not long to @GNUTAR{}, or it has not
-been produced by @acronym{GNU}. Currently, @GNUTAR{}
-documentation is provided in Texinfo format only, if we
-except, of course, the short result of @kbd{tar --help}.
+either it does not belong to @GNUTAR{}, or it has not
+been produced by @acronym{GNU}. Some package maintainers convert
+@kbd{tar --help} output to a man page, using @command{help2man}. In
+any case, please bear in mind that the authoritative source of
+information about @GNUTAR{} is this Texinfo documentation.
-@node verbose
-@section Checking @command{tar} progress
+@node defaults
+@section Obtaining @GNUTAR{} default values
-@cindex Progress information
-@cindex Status information
-@cindex Information on progress and status of operations
-@cindex Verbose operation
-@cindex Block number where error occurred
-@cindex Error message, block number of
-@cindex Version of the @command{tar} program
+@opindex show-defaults
+@GNUTAR{} has some predefined defaults that are used when you do not
+explicitly specify another values. To obtain a list of such
+defaults, use @option{--show-defaults} option. This will output the
+values in the form of @command{tar} command line options:
+
+@smallexample
+@group
+$ @kbd{tar --show-defaults}
+--format=gnu -f- -b20 --quoting-style=escape
+--rmt-command=/etc/rmt --rsh-command=/usr/bin/rsh
+@end group
+@end smallexample
+
+@noindent
+Notice, that this option outputs only one line. The example output above
+has been split to fit page boundaries.
+
+@noindent
+The above output shows that this version of @GNUTAR{} defaults to
+using @samp{gnu} archive format (@pxref{Formats}), it uses standard
+output as the archive, if no @option{--file} option has been given
+(@pxref{file tutorial}), the default blocking factor is 20
+(@pxref{Blocking Factor}). It also shows the default locations where
+@command{tar} will look for @command{rmt} and @command{rsh} binaries.
-@cindex Getting more information during the operation
-@cindex Information during operation
-@cindex Feedback from @command{tar}
+@node verbose
+@section Checking @command{tar} progress
Typically, @command{tar} performs most operations without reporting any
information to the user except error messages. When using @command{tar}
message in order to solve the problem. The following options can be
helpful diagnostic tools.
-Normally, the @value{op-list} command to list an archive prints just
-the file names (one per line) and the other commands are silent.
-When used with most operations, the @value{op-verbose} option causes
-@command{tar} to print the name of each file or archive member as it
-is processed. This and the other options which make @command{tar} print
-status information can be useful in monitoring @command{tar}.
-
-With @value{op-create} or @value{op-extract}, @value{op-verbose} used once
-just prints the names of the files or members as they are processed.
-Using it twice causes @command{tar} to print a longer listing (reminiscent
-of @samp{ls -l}) for each member. Since @value{op-list} already prints
-the names of the members, @value{op-verbose} used once with @value{op-list}
-causes @command{tar} to print an @samp{ls -l} type listing of the files
-in the archive. The following examples both extract members with
-long list output:
+@cindex Verbose operation
+@opindex verbose
+Normally, the @option{--list} (@option{-t}) command to list an archive
+prints just the file names (one per line) and the other commands are
+silent. When used with most operations, the @option{--verbose}
+(@option{-v}) option causes @command{tar} to print the name of each
+file or archive member as it is processed. This and the other options
+which make @command{tar} print status information can be useful in
+monitoring @command{tar}.
+
+With @option{--create} or @option{--extract}, @option{--verbose} used
+once just prints the names of the files or members as they are processed.
+Using it twice causes @command{tar} to print a longer listing
+(@xref{verbose member listing}, for the description) for each member.
+Since @option{--list} already prints the names of the members,
+@option{--verbose} used once with @option{--list} causes @command{tar}
+to print an @samp{ls -l} type listing of the files in the archive.
+The following examples both extract members with long list output:
@smallexample
$ @kbd{tar --extract --file=archive.tar --verbose --verbose}
verbose output to @var{file} rather than to standard output or standard
error.
-The @value{op-totals} option---which is only meaningful when used with
-@value{op-create}---causes @command{tar} to print the total
-amount written to the archive, after it has been fully created.
+@anchor{totals}
+@cindex Obtaining total status information
+@opindex totals
+The @option{--totals} option causes @command{tar} to print on the
+standard error the total amount of bytes transferred when processing
+an archive. When creating or appending to an archive, this option
+prints the number of bytes written to the archive and the average
+speed at which they have been written, e.g.:
+
+@smallexample
+@group
+$ @kbd{tar -c -f archive.tar --totals /home}
+Total bytes written: 7924664320 (7.4GiB, 85MiB/s)
+@end group
+@end smallexample
+
+When reading an archive, this option displays the number of bytes
+read:
+
+@smallexample
+@group
+$ @kbd{tar -x -f archive.tar --totals}
+Total bytes read: 7924664320 (7.4GiB, 95MiB/s)
+@end group
+@end smallexample
+
+Finally, when deleting from an archive, the @option{--totals} option
+displays both numbers plus number of bytes removed from the archive:
+
+@smallexample
+@group
+$ @kbd{tar --delete -f foo.tar --totals --wildcards '*~'}
+Total bytes read: 9543680 (9.2MiB, 201MiB/s)
+Total bytes written: 3829760 (3.7MiB, 81MiB/s)
+Total bytes deleted: 1474048
+@end group
+@end smallexample
+
+You can also obtain this information on request. When
+@option{--totals} is used with an argument, this argument is
+interpreted as a symbolic name of a signal, upon delivery of which the
+statistics is to be printed:
+
+@table @option
+@item --totals=@var{signo}
+Print statistics upon delivery of signal @var{signo}. Valid arguments
+are: @code{SIGHUP}, @code{SIGQUIT}, @code{SIGINT}, @code{SIGUSR1} and
+@code{SIGUSR2}. Shortened names without @samp{SIG} prefix are also
+accepted.
+@end table
-The @value{op-checkpoint} option prints an occasional message
-as @command{tar} reads or writes the archive. In fact, it prints
-a message each 10 records read or written. It is designed for
+Both forms of @option{--totals} option can be used simultaneously.
+Thus, @kbd{tar -x --totals --totals=USR1} instructs @command{tar} to
+extract all members from its default archive and print statistics
+after finishing the extraction, as well as when receiving signal
+@code{SIGUSR1}.
+
+@anchor{Progress information}
+@cindex Progress information
+The @option{--checkpoint} option prints an occasional message
+as @command{tar} reads or writes the archive. It is designed for
those who don't need the more detailed (and voluminous) output of
-@value{op-block-number}, but do want visual confirmation that @command{tar}
-is actually making forward progress.
+@option{--block-number} (@option{-R}), but do want visual confirmation
+that @command{tar} is actually making forward progress. By default it
+prints a message each 10 records read or written. This can be changed
+by giving it a numeric argument after an equal sign:
-@FIXME{There is some confusion here. It seems that -R once wrote a
-message at @samp{every} record read or written.}
+@smallexample
+$ @kbd{tar -c --checkpoint=1000} /var
+tar: Write checkpoint 1000
+tar: Write checkpoint 2000
+tar: Write checkpoint 3000
+@end smallexample
+
+This example shows the default checkpoint message used by
+@command{tar}. If you place a dot immediately after the equal
+sign, it will print a @samp{.} at each checkpoint@footnote{This is
+actually a shortcut for @option{--checkpoint=@var{n}
+--checkpoint-action=dot}. @xref{checkpoints, dot}.}. For example:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=.1000} /var
+...
+@end smallexample
-The @value{op-show-omitted-dirs} option, when reading an archive---with
-@value{op-list} or @value{op-extract}, for example---causes a message
+The @option{--checkpoint} option provides a flexible mechanism for
+executing arbitrary actions upon hitting checkpoints, see the next
+section (@pxref{checkpoints}), for more information on it.
+
+@opindex show-omitted-dirs
+@anchor{show-omitted-dirs}
+The @option{--show-omitted-dirs} option, when reading an archive---with
+@option{--list} or @option{--extract}, for example---causes a message
to be printed for each directory in the archive which is skipped.
This happens regardless of the reason for skipping: the directory might
not have been named on the command line (implicitly or explicitly),
-it might be excluded by the use of the @value{op-exclude} option, or
-some other reason.
+it might be excluded by the use of the
+@option{--exclude=@var{pattern}} option, or some other reason.
-If @value{op-block-number} is used, @command{tar} prints, along with
+@opindex block-number
+@cindex Block number where error occurred
+@anchor{block-number}
+If @option{--block-number} (@option{-R}) is used, @command{tar} prints, along with
every message it would normally produce, the block number within the
archive where the message was triggered. Also, supplementary messages
are triggered when reading blocks full of NULs, or when hitting end of
-file on the archive. As of now, if the archive if properly terminated
+file on the archive. As of now, if the archive is properly terminated
with a NUL block, the reading of the file may stop before end of file
is met, so the position of end of file will not usually show when
-@value{op-block-number} is used. Note that @GNUTAR{}
+@option{--block-number} (@option{-R}) is used. Note that @GNUTAR{}
drains the archive before exiting when reading the
archive from a pipe.
+@cindex Error message, block number of
This option is especially useful when reading damaged archives, since
it helps pinpoint the damaged sections. It can also be used with
-@value{op-list} when listing a file-system backup tape, allowing you to
+@option{--list} (@option{-t}) when listing a file-system backup tape, allowing you to
choose among several backup tapes when retrieving a file later, in
favor of the tape where the file appears earliest (closest to the
-front of the tape). @FIXME-xref{when the node name is set and the
-backup section written.}
+front of the tape). @xref{backup}.
-@node interactive
-@section Asking for Confirmation During Operations
-@cindex Interactive operation
+@node checkpoints
+@section Checkpoints
+@cindex checkpoints, defined
+@opindex checkpoint
+@opindex checkpoint-action
-Typically, @command{tar} carries out a command without stopping for
-further instructions. In some situations however, you may want to
-exclude some files and archive members from the operation (for instance
-if disk or storage space is tight). You can do this by excluding
-certain files automatically (@pxref{Choosing}), or by performing
-an operation interactively, using the @value{op-interactive} option.
-@command{tar} also accepts @option{--confirmation} for this option.
+A @dfn{checkpoint} is a moment of time before writing @var{n}th record to
+the archive (a @dfn{write checkpoint}), or before reading @var{n}th record
+from the archive (a @dfn{read checkpoint}). Checkpoints allow to
+periodically execute arbitrary actions.
-When the @value{op-interactive} option is specified, before
-reading, writing, or deleting files, @command{tar} first prints a message
-for each such file, telling what operation it intends to take, then asks
-for confirmation on the terminal. The actions which require
-confirmation include adding a file to the archive, extracting a file
-from the archive, deleting a file from the archive, and deleting a file
-from disk. To confirm the action, you must type a line of input
-beginning with @samp{y}. If your input line begins with anything other
-than @samp{y}, @command{tar} skips that file.
+The checkpoint facility is enabled using the following option:
-If @command{tar} is reading the archive from the standard input,
-@command{tar} opens the file @file{/dev/tty} to support the interactive
-communications.
+@table @option
+@xopindex{checkpoint, defined}
+@item --checkpoint[=@var{n}]
+Schedule checkpoints before writing or reading each @var{n}th record.
+The default value for @var{n} is 10.
+@end table
-Verbose output is normally sent to standard output, separate from
-other error messages. However, if the archive is produced directly
-on standard output, then verbose output is mixed with errors on
-@code{stderr}. Producing the archive on standard output may be used
-as a way to avoid using disk space, when the archive is soon to be
-consumed by another process reading it, say. Some people felt the need
-of producing an archive on stdout, still willing to segregate between
-verbose output and error output. A possible approach would be using a
-named pipe to receive the archive, and having the consumer process to
+A list of arbitrary @dfn{actions} can be executed at each checkpoint.
+These actions include: pausing, displaying textual messages, and
+executing arbitrary external programs. Actions are defined using
+the @option{--checkpoint-action} option.
+
+@table @option
+@xopindex{checkpoint-action, defined}
+@item --checkpoint-action=@var{action}
+Execute an @var{action} at each checkpoint.
+@end table
+
+@cindex @code{echo}, checkpoint action
+The simplest value of @var{action} is @samp{echo}. It instructs
+@command{tar} to display the default message on the standard error
+stream upon arriving at each checkpoint. The default message is (in
+@acronym{POSIX} locale) @samp{Write checkpoint @var{n}}, for write
+checkpoints, and @samp{Read checkpoint @var{n}}, for read checkpoints.
+Here, @var{n} represents ordinal number of the checkpoint.
+
+In another locales, translated versions of this message are used.
+
+This is the default action, so running:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=echo} /var
+@end smallexample
+
+@noindent
+is equivalent to:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000} /var
+@end smallexample
+
+The @samp{echo} action also allows to supply a customized message.
+You do so by placing an equals sign and the message right after it,
+e.g.:
+
+@smallexample
+--checkpoint-action="echo=Hit %s checkpoint #%u"
+@end smallexample
+
+The @samp{%s} and @samp{%u} in the above example are
+@dfn{meta-characters}. The @samp{%s} meta-character is replaced with
+the @dfn{type} of the checkpoint: @samp{write} or
+@samp{read} (or a corresponding translated version in locales other
+than @acronym{POSIX}). The @samp{%u} meta-character is replaced with
+the ordinal number of the checkpoint. Thus, the above example could
+produce the following output when used with the @option{--create}
+option:
+
+@smallexample
+tar: Hit write checkpoint #10
+tar: Hit write checkpoint #20
+tar: Hit write checkpoint #30
+@end smallexample
+
+Aside from meta-character expansion, the message string is subject to
+@dfn{unquoting}, during which the backslash @dfn{escape sequences} are
+replaced with their corresponding @acronym{ASCII} characters
+(@pxref{escape sequences}). E.g. the following action will produce an
+audible bell and the message described above at each checkpoint:
+
+@smallexample
+--checkpoint-action='echo=\aHit %s checkpoint #%u'
+@end smallexample
+
+@cindex @code{bell}, checkpoint action
+There is also a special action which produces an audible signal:
+@samp{bell}. It is not equivalent to @samp{echo='\a'}, because
+@samp{bell} sends the bell directly to the console (@file{/dev/tty}),
+whereas @samp{echo='\a'} sends it to the standard error.
+
+@cindex @code{ttyout}, checkpoint action
+The @samp{ttyout=@var{string}} action outputs @var{string} to
+@file{/dev/tty}, so it can be used even if the standard output is
+redirected elsewhere. The @var{string} is subject to the same
+modifications as with @samp{echo} action. In contrast to the latter,
+@samp{ttyout} does not prepend @command{tar} executable name to the
+string, nor does it output a newline after it. For example, the
+following action will print the checkpoint message at the same screen
+line, overwriting any previous message:
+
+@smallexample
+--checkpoint-action="ttyout=\rHit %s checkpoint #%u"
+@end smallexample
+
+@cindex @code{dot}, checkpoint action
+Another available checkpoint action is @samp{dot} (or @samp{.}). It
+instructs @command{tar} to print a single dot on the standard listing
+stream, e.g.:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=dot} /var
+...
+@end smallexample
+
+For compatibility with previous @GNUTAR{} versions, this action can
+be abbreviated by placing a dot in front of the checkpoint frequency,
+as shown in the previous section.
+
+@cindex @code{sleep}, checkpoint action
+Yet another action, @samp{sleep}, pauses @command{tar} for a specified
+amount of seconds. The following example will stop for 30 seconds at each
+checkpoint:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=sleep=30}
+@end smallexample
+
+@cindex @code{exec}, checkpoint action
+Finally, the @code{exec} action executes a given external program.
+For example:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=exec=/sbin/cpoint}
+@end smallexample
+
+This program is executed using @command{/bin/sh -c}, with no
+additional arguments. Its exit code is ignored. It gets a copy of
+@command{tar}'s environment plus the following variables:
+
+@table @env
+@vrindex TAR_VERSION, checkpoint script environment
+@item TAR_VERSION
+@GNUTAR{} version number.
+
+@vrindex TAR_ARCHIVE, checkpoint script environment
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_BLOCKING_FACTOR, checkpoint script environment
+@item TAR_BLOCKING_FACTOR
+Current blocking factor (@pxref{Blocking}).
+
+@vrindex TAR_CHECKPOINT, checkpoint script environment
+@item TAR_CHECKPOINT
+Number of the checkpoint.
+
+@vrindex TAR_SUBCOMMAND, checkpoint script environment
+@item TAR_SUBCOMMAND
+A short option describing the operation @command{tar} is executing.
+@xref{Operations}, for a complete list of subcommand options.
+
+@vrindex TAR_FORMAT, checkpoint script environment
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+@end table
+
+Any number of actions can be defined, by supplying several
+@option{--checkpoint-action} options in the command line. For
+example, the command below displays two messages, pauses
+execution for 30 seconds and executes the @file{/sbin/cpoint} script:
+
+@example
+@group
+$ @kbd{tar -c -f arc.tar \
+ --checkpoint-action='\aecho=Hit %s checkpoint #%u' \
+ --checkpoint-action='echo=Sleeping for 30 seconds' \
+ --checkpoint-action='sleep=30' \
+ --checkpoint-action='exec=/sbin/cpoint'}
+@end group
+@end example
+
+This example also illustrates the fact that
+@option{--checkpoint-action} can be used without
+@option{--checkpoint}. In this case, the default checkpoint frequency
+(at each 10th record) is assumed.
+
+@node warnings
+@section Controlling Warning Messages
+
+Sometimes, while performing the requested task, @GNUTAR{} notices
+some conditions that are not exactly errors, but which the user
+should be aware of. When this happens, @command{tar} issues a
+@dfn{warning message} describing the condition. Warning messages
+are output to the standard error and they do not affect the exit
+code of @command{tar} command.
+
+@xopindex{warning, explained}
+@GNUTAR{} allows the user to suppress some or all of its warning
+messages:
+
+@table @option
+@item --warning=@var{keyword}
+Control display of the warning messages identified by @var{keyword}.
+If @var{keyword} starts with the prefix @samp{no-}, such messages are
+suppressed. Otherwise, they are enabled.
+
+Multiple @option{--warning} messages accumulate.
+
+The tables below list allowed values for @var{keyword} along with the
+warning messages they control.
+@end table
+
+@subheading Keywords controlling @command{tar} operation
+@table @asis
+@kwindex all
+@item all
+Enable all warning messages. This is the default.
+@kwindex none
+@item none
+Disable all warning messages.
+@kwindex filename-with-nuls
+@cindex @samp{file name read contains nul character}, warning message
+@item filename-with-nuls
+@samp{%s: file name read contains nul character}
+@kwindex alone-zero-block
+@cindex @samp{A lone zero block at}, warning message
+@item alone-zero-block
+@samp{A lone zero block at %s}
+@end table
+
+@subheading Keywords applicable for @command{tar --create}
+@table @asis
+@kwindex cachedir
+@cindex @samp{contains a cache directory tag}, warning message
+@item cachedir
+@samp{%s: contains a cache directory tag %s; %s}
+@kwindex file-shrank
+@cindex @samp{File shrank by %s bytes}, warning message
+@item file-shrank
+@samp{%s: File shrank by %s bytes; padding with zeros}
+@kwindex xdev
+@cindex @samp{file is on a different filesystem}, warning message
+@item xdev
+@samp{%s: file is on a different filesystem; not dumped}
+@kwindex file-ignored
+@cindex @samp{Unknown file type; file ignored}, warning message
+@cindex @samp{socket ignored}, warning message
+@cindex @samp{door ignored}, warning message
+@item file-ignored
+@samp{%s: Unknown file type; file ignored}
+@*@samp{%s: socket ignored}
+@*@samp{%s: door ignored}
+@kwindex file-unchanged
+@cindex @samp{file is unchanged; not dumped}, warning message
+@item file-unchanged
+@samp{%s: file is unchanged; not dumped}
+@kwindex ignore-archive
+@cindex @samp{file is the archive; not dumped}, warning message
+@kwindex ignore-archive
+@cindex @samp{file is the archive; not dumped}, warning message
+@item ignore-archive
+@samp{%s: file is the archive; not dumped}
+@kwindex file-removed
+@cindex @samp{File removed before we read it}, warning message
+@item file-removed
+@samp{%s: File removed before we read it}
+@kwindex file-changed
+@cindex @samp{file changed as we read it}, warning message
+@item file-changed
+@samp{%s: file changed as we read it}
+@end table
+
+@subheading Keywords applicable for @command{tar --extract}
+@table @asis
+@kwindex timestamp
+@cindex @samp{implausibly old time stamp %s}, warning message
+@cindex @samp{time stamp %s is %s s in the future}, warning message
+@item timestamp
+@samp{%s: implausibly old time stamp %s}
+@*@samp{%s: time stamp %s is %s s in the future}
+@kwindex contiguous-cast
+@cindex @samp{Extracting contiguous files as regular files}, warning message
+@item contiguous-cast
+@samp{Extracting contiguous files as regular files}
+@kwindex symlink-cast
+@cindex @samp{Attempting extraction of symbolic links as hard links}, warning message
+@item symlink-cast
+@samp{Attempting extraction of symbolic links as hard links}
+@kwindex unknown-cast
+@cindex @samp{Unknown file type `%c', extracted as normal file}, warning message
+@item unknown-cast
+@samp{%s: Unknown file type `%c', extracted as normal file}
+@kwindex ignore-newer
+@cindex @samp{Current %s is newer or same age}, warning message
+@item ignore-newer
+@samp{Current %s is newer or same age}
+@kwindex unknown-keyword
+@cindex @samp{Ignoring unknown extended header keyword `%s'}, warning message
+@item unknown-keyword
+@samp{Ignoring unknown extended header keyword `%s'}
+@end table
+
+@subheading Keywords controlling incremental extraction:
+@table @asis
+@kwindex rename-directory
+@cindex @samp{%s: Directory has been renamed from %s}, warning message
+@cindex @samp{%s: Directory has been renamed}, warning message
+@item rename-directory
+@samp{%s: Directory has been renamed from %s}
+@*@samp{%s: Directory has been renamed}
+@kwindex new-directory
+@cindex @samp{%s: Directory is new}, warning message
+@item new-directory
+@samp{%s: Directory is new}
+@kwindex xdev
+@cindex @samp{%s: directory is on a different device: not purging}, warning message
+@item xdev
+@samp{%s: directory is on a different device: not purging}
+@kwindex bad-dumpdir
+@cindex @samp{Malformed dumpdir: 'X' never used}, warning message
+@item bad-dumpdir
+@samp{Malformed dumpdir: 'X' never used}
+@end table
+
+@node interactive
+@section Asking for Confirmation During Operations
+@cindex Interactive operation
+
+Typically, @command{tar} carries out a command without stopping for
+further instructions. In some situations however, you may want to
+exclude some files and archive members from the operation (for instance
+if disk or storage space is tight). You can do this by excluding
+certain files automatically (@pxref{Choosing}), or by performing
+an operation interactively, using the @option{--interactive} (@option{-w}) option.
+@command{tar} also accepts @option{--confirmation} for this option.
+
+@opindex interactive
+When the @option{--interactive} (@option{-w}) option is specified, before
+reading, writing, or deleting files, @command{tar} first prints a message
+for each such file, telling what operation it intends to take, then asks
+for confirmation on the terminal. The actions which require
+confirmation include adding a file to the archive, extracting a file
+from the archive, deleting a file from the archive, and deleting a file
+from disk. To confirm the action, you must type a line of input
+beginning with @samp{y}. If your input line begins with anything other
+than @samp{y}, @command{tar} skips that file.
+
+If @command{tar} is reading the archive from the standard input,
+@command{tar} opens the file @file{/dev/tty} to support the interactive
+communications.
+
+Verbose output is normally sent to standard output, separate from
+other error messages. However, if the archive is produced directly
+on standard output, then verbose output is mixed with errors on
+@code{stderr}. Producing the archive on standard output may be used
+as a way to avoid using disk space, when the archive is soon to be
+consumed by another process reading it, say. Some people felt the need
+of producing an archive on stdout, still willing to segregate between
+verbose output and error output. A possible approach would be using a
+named pipe to receive the archive, and having the consumer process to
read from that named pipe. This has the advantage of letting standard
output free to receive verbose output, all separate from errors.
@node Basic tar
@section Basic @GNUTAR{} Operations
-The basic @command{tar} operations, @value{op-create}, @value{op-list} and
-@value{op-extract}, are currently presented and described in the tutorial
+The basic @command{tar} operations, @option{--create} (@option{-c}),
+@option{--list} (@option{-t}) and @option{--extract} (@option{--get},
+@option{-x}), are currently presented and described in the tutorial
chapter of this manual. This section provides some complementary notes
for these operations.
-@table @asis
-@item @value{op-create}
+@table @option
+@xopindex{create, complementary notes}
+@item --create
+@itemx -c
Creating an empty archive would have some kind of elegance. One can
-initialize an empty archive and later use @value{op-append} for adding
-all members. Some applications would not welcome making an exception
-in the way of adding the first archive member. On the other hand,
-many people reported that it is dangerously too easy for @command{tar}
-to destroy a magnetic tape with an empty archive@footnote{This is well
-described in @cite{Unix-haters Handbook}, by Simson Garfinkel, Daniel
-Weise & Steven Strassmann, IDG Books, ISBN 1-56884-203-1.}. The two most
-common errors are:
+initialize an empty archive and later use @option{--append}
+(@option{-r}) for adding all members. Some applications would not
+welcome making an exception in the way of adding the first archive
+member. On the other hand, many people reported that it is
+dangerously too easy for @command{tar} to destroy a magnetic tape with
+an empty archive@footnote{This is well described in @cite{Unix-haters
+Handbook}, by Simson Garfinkel, Daniel Weise & Steven Strassmann, IDG
+Books, ISBN 1-56884-203-1.}. The two most common errors are:
@enumerate
@item
file, which was meant to be saved, is rather destroyed.
@end enumerate
-So, recognizing the likelihood and the catastrophical nature of these
+So, recognizing the likelihood and the catastrophic nature of these
errors, @GNUTAR{} now takes some distance from elegance, and
-cowardly refuses to create an archive when @value{op-create} option is
-given, there are no arguments besides options, and @value{op-files-from}
-option is @emph{not} used. To get around the cautiousness of @GNUTAR{}
-and nevertheless create an archive with nothing in it,
-one may still use, as the value for the @value{op-files-from} option,
-a file with no names in it, as shown in the following commands:
+cowardly refuses to create an archive when @option{--create} option is
+given, there are no arguments besides options, and
+@option{--files-from} (@option{-T}) option is @emph{not} used. To get
+around the cautiousness of @GNUTAR{} and nevertheless create an
+archive with nothing in it, one may still use, as the value for the
+@option{--files-from} option, a file with no names in it, as shown in
+the following commands:
@smallexample
@kbd{tar --create --file=empty-archive.tar --files-from=/dev/null}
@kbd{tar cfT empty-archive.tar /dev/null}
@end smallexample
-@item @value{op-extract}
+@xopindex{extract, complementary notes}
+@item --extract
+@itemx --get
+@itemx -x
A socket is stored, within a @GNUTAR{} archive, as a pipe.
-@item @value{op-list}
+@item @option{--list} (@option{-t})
@GNUTAR{} now shows dates as @samp{1996-08-30},
-while it used to show them as @samp{Aug 30 1996}. (One can revert to
-the old behavior by defining @code{USE_OLD_CTIME} in @file{src/list.c}
-before reinstalling.) But preferably, people should get used to ISO
-8601 dates. Local American dates should be made available again with
-full date localization support, once ready. In the meantime, programs
-not being localizable for dates should prefer international dates,
-that's really the way to go.
-
-Look up @url{http://www.ft.uni-erlangen.de/~mskuhn/iso-time.html} if you
+while it used to show them as @samp{Aug 30 1996}. Preferably,
+people should get used to ISO 8601 dates. Local American dates should
+be made available again with full date localization support, once
+ready. In the meantime, programs not being localizable for dates
+should prefer international dates, that's really the way to go.
+
+Look up @url{http://www.cl.cam.ac.uk/@/~mgk25/@/iso-time.html} if you
are curious, it contains a detailed explanation of the ISO 8601 standard.
@end table
@node Operations
@subsection The Five Advanced @command{tar} Operations
-@UNREVISED
+@cindex basic operations
In the last chapter, you learned about the first three operations to
@command{tar}. This chapter presents the remaining five operations to
@command{tar}: @option{--append}, @option{--update}, @option{--concatenate},
will give examples using the same directory and files that you created
in the last chapter. As you may recall, the directory is called
@file{practice}, the files are @samp{jazz}, @samp{blues}, @samp{folk},
-@samp{rock}, and the two archive files you created are
+and the two archive files you created are
@samp{collection.tar} and @samp{music.tar}.
We will also use the archive files @samp{afiles.tar} and
-@samp{bfiles.tar}. @samp{afiles.tar} contains the members @samp{apple},
-@samp{angst}, and @samp{aspic}. @samp{bfiles.tar} contains the members
+@samp{bfiles.tar}. The archive @samp{afiles.tar} contains the members @samp{apple},
+@samp{angst}, and @samp{aspic}; @samp{bfiles.tar} contains the members
@samp{./birds}, @samp{baboon}, and @samp{./box}.
Unless we state otherwise, all practicing you do and examples you follow
@itemx -r
Add new entries to an archive that already exists.
@item --update
-@itemx -r
+@itemx -u
Add more recent copies of archive members to the end of an archive, if
they exist.
@item --concatenate
@node append
@subsection How to Add Files to Existing Archives: @option{--append}
-@UNREVISED
+@cindex appending files to existing archive
+@opindex append
If you want to add files to an existing archive, you don't need to
-create a new archive; you can use @value{op-append}. The archive must
-already exist in order to use @option{--append}. (A related operation
-is the @option{--update} operation; you can use this to add newer
-versions of archive members to an existing archive. To learn how to
+create a new archive; you can use @option{--append} (@option{-r}).
+The archive must already exist in order to use @option{--append}. (A
+related operation is the @option{--update} operation; you can use this
+to add newer versions of archive members to an existing archive. To learn how to
do this with @option{--update}, @pxref{update}.)
-If you use @value{op-append} to add a file that has the same name as an
+If you use @option{--append} to add a file that has the same name as an
archive member to an archive containing that archive member, then the
old member is not deleted. What does happen, however, is somewhat
complex. @command{tar} @emph{allows} you to have infinite number of files
with the same name. Some operations treat these same-named members no
differently than any other set of archive members: for example, if you
-view an archive with @value{op-list}, you will see all of those members
-listed, with their data modification times, owners, etc.
+view an archive with @option{--list} (@option{-t}), you will see all
+of those members listed, with their data modification times, owners, etc.
Other operations don't deal with these members as perfectly as you might
-prefer; if you were to use @value{op-extract} to extract the archive,
-only the most recently added copy of a member with the same name as four
+prefer; if you were to use @option{--extract} to extract the archive,
+only the most recently added copy of a member with the same name as
other members would end up in the working directory. This is because
@option{--extract} extracts an archive in the order the members appeared
in the archive; the most recently archived members will be extracted
last. Additionally, an extracted member will @emph{replace} a file of
the same name which existed in the directory already, and @command{tar}
will not prompt you about this@footnote{Unless you give it
-@option{--keep-old-files} option, or the disk copy is newer than the
+@option{--keep-old-files} option, or the disk copy is newer than
the one in the archive and you invoke @command{tar} with
-@option{--keep-newer-files} option}. Thus, only the most recently archived
+@option{--keep-newer-files} option.}. Thus, only the most recently archived
member will end up being extracted, as it will replace the one
extracted before it, and so on.
+@cindex extracting @var{n}th copy of the file
+@xopindex{occurrence, described}
There exists a special option that allows you to get around this
behavior and extract (or list) only a particular copy of the file.
This is @option{--occurrence} option. If you run @command{tar} with
@end smallexample
@noindent
-would extract only the second copy. @xref{Option Summary,---occurrence}, for the description of @value{op-occurrence} option.
+would extract only the second copy. @xref{Option
+Summary,---occurrence}, for the description of @option{--occurrence}
+option.
@FIXME{ hag -- you might want to incorporate some of the above into the
MMwtSN node; not sure. i didn't know how to make it simpler...
-There are a few ways to get around this. (maybe xref Multiple Members
-with the Same Name.}
+There are a few ways to get around this. Xref to Multiple Members
+with the Same Name, maybe.}
@cindex Members, replacing with other members
@cindex Replacing members with other members
-If you want to replace an archive member, use @value{op-delete} to
-delete the member you want to remove from the archive, , and then use
+@xopindex{delete, using before --append}
+If you want to replace an archive member, use @option{--delete} to
+delete the member you want to remove from the archive, and then use
@option{--append} to add the member you want to be in the archive. Note
that you can not change the order of the archive; the most recently
added member will still appear last. In this sense, you cannot truly
@node appending files
@subsubsection Appending Files to an Archive
-@UNREVISED
@cindex Adding files to an Archive
@cindex Appending files to an Archive
@cindex Archives, Appending files to
+@opindex append
The simplest way to add a file to an already existing archive is the
-@value{op-append} operation, which writes specified files into the
-archive whether or not they are already among the archived files.
+@option{--append} (@option{-r}) operation, which writes specified
+files into the archive whether or not they are already among the
+archived files.
+
When you use @option{--append}, you @emph{must} specify file name
arguments, as there is no default. If you specify a file that already
exists in the archive, another copy of the file will be added to the
end of the archive. As with other operations, the member names of the
newly added files will be exactly the same as their names given on the
-command line. The @value{op-verbose} option will print out the names
-of the files as they are written into the archive.
+command line. The @option{--verbose} (@option{-v}) option will print
+out the names of the files as they are written into the archive.
@option{--append} cannot be performed on some tape drives, unfortunately,
due to deficiencies in the formats those tape drives use. The archive
@end smallexample
@noindent
-If you now use the @value{op-list} operation, you will see that
+If you now use the @option{--list} (@option{-t}) operation, you will see that
@file{rock} has been added to the archive:
@smallexample
$ @kbd{tar --list --file=collection.tar}
--rw-rw-rw- me user 28 1996-10-18 16:31 jazz
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
--rw-rw-rw- me user 20 1996-09-23 16:44 folk
--rw-rw-rw- me user 20 1996-09-23 16:44 rock
+-rw-r--r-- me user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me user 20 1996-09-23 16:44 rock
@end smallexample
-@FIXME{in theory, dan will (soon) try to turn this node into what it's
-title claims it will become...}
-
@node multiple
-@subsubsection Multiple Files with the Same Name
-
-You can use @value{op-append} to add copies of files which have been
-updated since the archive was created. (However, we do not recommend
-doing this since there is another @command{tar} option called
-@option{--update}; @pxref{update} for more information. We describe this
-use of @option{--append} here for the sake of completeness.) @FIXME{is
-this really a good idea, to give this whole description for something
-which i believe is basically a Stupid way of doing something? certain
-aspects of it show ways in which tar is more broken than i'd personally
-like to admit to, specifically the last sentence. On the other hand, i
-don't think it's a good idea to be saying that we explicitly don't
-recommend using something, but i can't see any better way to deal with
-the situation.}When you extract the archive, the older version will be
-effectively lost. This works because files are extracted from an
+@subsubsection Multiple Members with the Same Name
+@cindex members, multiple
+@cindex multiple members
+
+You can use @option{--append} (@option{-r}) to add copies of files
+which have been updated since the archive was created. (However, we
+do not recommend doing this since there is another @command{tar}
+option called @option{--update}; @xref{update}, for more information.
+We describe this use of @option{--append} here for the sake of
+completeness.) When you extract the archive, the older version will
+be effectively lost. This works because files are extracted from an
archive in the order in which they were archived. Thus, when the
archive is extracted, a file archived later in time will replace a
-file of the same name which was archived earlier, even though the older
-version of the file will remain in the archive unless you delete all
-versions of the file.
+file of the same name which was archived earlier, even though the
+older version of the file will remain in the archive unless you delete
+all versions of the file.
Supposing you change the file @file{blues} and then append the changed
version to @file{collection.tar}. As you saw above, the original
@smallexample
$ @kbd{tar --list --verbose --file=collection.tar}
--rw-rw-rw- me user 28 1996-10-18 16:31 jazz
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
--rw-rw-rw- me user 20 1996-09-23 16:44 folk
--rw-rw-rw- me user 20 1996-09-23 16:44 rock
--rw-rw-rw- me user 58 1996-10-24 18:30 blues
+-rw-r--r-- me user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me user 20 1996-09-23 16:44 rock
+-rw-r--r-- me user 58 1996-10-24 18:30 blues
@end smallexample
@noindent
the archive and running @samp{ls} on the directory.
If you wish to extract the first occurrence of the file @file{blues}
-from the archive, use @value{op-occurrence} option, as shown in
+from the archive, use @option{--occurrence} option, as shown in
the following example:
@smallexample
$ @kbd{tar --extract -vv --occurrence --file=collection.tar blues}
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
@end smallexample
-@xref{Writing}, for more information on @value{op-extract} and
-@xref{Option Summary, --occurrence}, for the description of
-@value{op-occurrence} option.
+@xref{Writing}, for more information on @option{--extract} and
+see @ref{Option Summary, --occurrence}, for a description of
+@option{--occurrence} option.
@node update
@subsection Updating an Archive
-@UNREVISED
@cindex Updating an archive
+@opindex update
-In the previous section, you learned how to use @value{op-append} to add
-a file to an existing archive. A related operation is
-@value{op-update}. The @option{--update} operation updates a @command{tar}
-archive by comparing the date of the specified archive members against
-the date of the file with the same name. If the file has been modified
-more recently than the archive member, then the newer version of the
-file is added to the archive (as with @value{op-append}).
+In the previous section, you learned how to use @option{--append} to
+add a file to an existing archive. A related operation is
+@option{--update} (@option{-u}). The @option{--update} operation
+updates a @command{tar} archive by comparing the date of the specified
+archive members against the date of the file with the same name. If
+the file has been modified more recently than the archive member, then
+the newer version of the file is added to the archive (as with
+@option{--append}).
Unfortunately, you cannot use @option{--update} with magnetic tape drives.
The operation will fail.
Both @option{--update} and @option{--append} work by adding to the end
of the archive. When you extract a file from the archive, only the
version stored last will wind up in the file system, unless you use
-the @value{op-backup} option. @FIXME-ref{Multiple Members with the
-Same Name}
+the @option{--backup} option. @xref{multiple}, for a detailed discussion.
@menu
* how to update::
@node how to update
@subsubsection How to Update an Archive Using @option{--update}
+@opindex update
-You must use file name arguments with the @value{op-update} operation.
-If you don't specify any files, @command{tar} won't act on any files and
-won't tell you that it didn't do anything (which may end up confusing
-you).
+You must use file name arguments with the @option{--update}
+(@option{-u}) operation. If you don't specify any files,
+@command{tar} won't act on any files and won't tell you that it didn't
+do anything (which may end up confusing you).
-@FIXME{note: the above parenthetical added because in fact, this
-behavior just confused the author. :-) }
+@c note: the above parenthetical added because in fact, this
+@c behavior just confused the author. :-)
To see the @option{--update} option at work, create a new file,
@file{classical}, in your practice directory, and some extra text to the
file @file{blues}, using any text editor. Then invoke @command{tar} with
-the @samp{update} operation and the @value{op-verbose} option specified,
-using the names of all the files in the practice directory as file name
-arguments:
+the @samp{update} operation and the @option{--verbose} (@option{-v})
+option specified, using the names of all the files in the @file{practice}
+directory as file name arguments:
@smallexample
$ @kbd{tar --update -v -f collection.tar blues folk rock classical}
the one at the end will be newer and larger, since you added text before
updating it.
-(The reason @command{tar} does not overwrite the older file when updating
+The reason @command{tar} does not overwrite the older file when updating
it is because writing to the middle of a section of tape is a difficult
process. Tapes are not designed to go backward. @xref{Media}, for more
information about tapes.
-@value{op-update} is not suitable for performing backups for two
+@option{--update} (@option{-u}) is not suitable for performing backups for two
reasons: it does not change directory content entries, and it
lengthens the archive every time it is used. The @GNUTAR{}
options intended specifically for backups are more
@cindex Adding archives to an archive
@cindex Concatenating Archives
+@opindex concatenate
+@opindex catenate
+@c @cindex @option{-A} described
Sometimes it may be convenient to add a second archive onto the end of
an archive rather than adding individual files to the archive. To add
one or more archives to the end of another archive, you should use the
-@value{op-concatenate} operation.
+@option{--concatenate} (@option{--catenate}, @option{-A}) operation.
-To use @option{--concatenate}, name the archives to be concatenated on the
-command line. (Nothing happens if you don't list any.) The members,
-and their member names, will be copied verbatim from those archives. If
-this causes multiple members to have the same name, it does not delete
-any members; all the members with the same name coexist. @FIXME-ref{For
-information on how this affects reading the archive, Multiple
-Members with the Same Name.}
+To use @option{--concatenate}, give the first archive with
+@option{--file} option and name the rest of archives to be
+concatenated on the command line. The members, and their member
+names, will be copied verbatim from those archives to the first
+one@footnote{This can cause multiple members to have the same name. For
+information on how this affects reading the archive, see @ref{multiple}.}.
+The new, concatenated archive will be called by the same name as the
+one given with the @option{--file} option. As usual, if you omit
+@option{--file}, @command{tar} will use the value of the environment
+variable @env{TAPE}, or, if this has not been set, the default archive name.
+
+@FIXME{There is no way to specify a new name...}
To demonstrate how @option{--concatenate} works, create two small archives
called @file{bluesrock.tar} and @file{folkjazz.tar}, using the relevant
@smallexample
$ @kbd{tar -cvf bluesrock.tar blues rock}
blues
-classical
+rock
$ @kbd{tar -cvf folkjazz.tar folk jazz}
folk
jazz
@smallexample
$ @kbd{tar -tvf bluesrock.tar}
--rw-rw-rw- melissa user 105 1997-01-21 19:42 blues
--rw-rw-rw- melissa user 33 1997-01-20 15:34 rock
-$ @kbd{tar -tvf folkjazz.tar}
--rw-rw-rw- melissa user 20 1996-09-23 16:44 folk
--rw-rw-rw- melissa user 65 1997-01-30 14:15 jazz
+-rw-r--r-- melissa user 105 1997-01-21 19:42 blues
+-rw-r--r-- melissa user 33 1997-01-20 15:34 rock
+$ @kbd{tar -tvf jazzfolk.tar}
+-rw-r--r-- melissa user 20 1996-09-23 16:44 folk
+-rw-r--r-- melissa user 65 1997-01-30 14:15 jazz
@end smallexample
We can concatenate these two archives with @command{tar}:
$ @kbd{tar --concatenate --file=bluesrock.tar jazzfolk.tar}
@end smallexample
-If you now list the contents of the @file{bluesclass.tar}, you will see
+If you now list the contents of the @file{bluesrock.tar}, you will see
that now it also contains the archive members of @file{jazzfolk.tar}:
@smallexample
$ @kbd{tar --list --file=bluesrock.tar}
blues
rock
-jazz
folk
+jazz
@end smallexample
When you use @option{--concatenate}, the source and target archives must
already exist and must have been created using compatible format
-parameters. @FIXME-pxref{Matching Format Parameters}The new,
-concatenated archive will be called by the same name as the first
-archive listed on the command line. @FIXME{is there a way to specify a
-new name?}
+parameters. Notice, that @command{tar} does not check whether the
+archives it concatenates have compatible formats, it does not
+even check if the files are really tar archives.
-Like @value{op-append}, this operation cannot be performed on some
+Like @option{--append} (@option{-r}), this operation cannot be performed on some
tape drives, due to deficiencies in the formats those tape drives use.
@cindex @code{concatenate} vs @command{cat}
@command{cat} to combine the archives, the result will not be a valid
@command{tar} format archive. If you need to retrieve files from an
archive that was added to using the @command{cat} utility, use the
-@value{op-ignore-zeros} option. @xref{Ignore Zeros}, for further
+@option{--ignore-zeros} (@option{-i}) option. @xref{Ignore Zeros}, for further
information on dealing with archives improperly combined using the
@command{cat} shell utility.
-@FIXME{this shouldn't go here. where should it go?} You must specify
-the source archives using @value{op-file} (@value{pxref-file}). If you
-do not specify the target archive, @command{tar} uses the value of the
-environment variable @env{TAPE}, or, if this has not been set, the
-default archive name.
-
@node delete
@subsection Removing Archive Members Using @option{--delete}
-@UNREVISED
@cindex Deleting files from an archive
@cindex Removing files from an archive
-You can remove members from an archive by using the @value{op-delete}
-option. Specify the name of the archive with @value{op-file} and then
-specify the names of the members to be deleted; if you list no member
-names, nothing will be deleted. The @value{op-verbose} option will
-cause @command{tar} to print the names of the members as they are deleted.
-As with @value{op-extract}, you must give the exact member names when
-using @samp{tar --delete}. @option{--delete} will remove all versions of
-the named file from the archive. The @option{--delete} operation can run
-very slowly.
+@opindex delete
+You can remove members from an archive by using the @option{--delete}
+option. Specify the name of the archive with @option{--file}
+(@option{-f}) and then specify the names of the members to be deleted;
+if you list no member names, nothing will be deleted. The
+@option{--verbose} option will cause @command{tar} to print the names
+of the members as they are deleted. As with @option{--extract}, you
+must give the exact member names when using @samp{tar --delete}.
+@option{--delete} will remove all versions of the named file from the
+archive. The @option{--delete} operation can run very slowly.
Unlike other operations, @option{--delete} has no short form.
folk
jazz
rock
-practice/blues
-practice/folk
-practice/jazz
-practice/rock
-practice/blues
$ @kbd{tar --delete --file=collection.tar blues}
$ @kbd{tar --list --file=collection.tar}
folk
jazz
rock
-$
@end smallexample
-@FIXME{I changed the order of these nodes around and haven't had a chance
-to fix the above example's results, yet. I have to play with this and
-follow it and see what it actually does!}
+@FIXME{Check if the above listing is actually produced after running
+all the examples on collection.tar.}
-The @value{op-delete} option has been reported to work properly when
+The @option{--delete} option has been reported to work properly when
@command{tar} acts as a filter from @code{stdin} to @code{stdout}.
@node compare
@subsection Comparing Archive Members with the File System
@cindex Verifying the currency of an archive
-@UNREVISED
+@opindex compare
The @option{--compare} (@option{-d}), or @option{--diff} operation compares
specified archive members against files with the same names, and then
reports differences in file size, mode, owner, modification date and
tar: funk not found in archive
@end smallexample
-@noindent
-@FIXME{what does this actually depend on? i'm making a guess,
-here.}Depending on the system where you are running @command{tar} and the
-version you are running, @command{tar} may have a different error message,
-such as:
-
-@smallexample
-funk: does not exist
-@end smallexample
-
-@FIXME-xref{somewhere, for more information about format parameters.
-Melissa says: such as "format variations"? But why? Clearly I don't
-get it yet; I'll deal when I get to that section.}
-
-The spirit behind the @value{op-compare} option is to check whether the
-archive represents the current state of files on disk, more than validating
-the integrity of the archive media. For this later goal, @xref{verify}.
+The spirit behind the @option{--compare} (@option{--diff},
+@option{-d}) option is to check whether the archive represents the
+current state of files on disk, more than validating the integrity of
+the archive media. For this latter goal, see @ref{verify}.
@node create options
@section Options Used by @option{--create}
+@xopindex{create, additional options}
The previous chapter described the basics of how to use
-@value{op-create} to create an archive from a set of files.
+@option{--create} (@option{-c}) to create an archive from a set of files.
@xref{create}. This section described advanced options to be used with
@option{--create}.
@menu
+* override:: Overriding File Metadata.
* Ignore Failed Read::
@end menu
+@node override
+@subsection Overriding File Metadata
+
+As described above, a @command{tar} archive keeps, for each member it contains,
+its @dfn{metadata}, such as modification time, mode and ownership of
+the file. @GNUTAR{} allows to replace these data with other values
+when adding files to the archive. The options described in this
+section affect creation of archives of any type. For POSIX archives,
+see also @ref{PAX keywords}, for additional ways of controlling
+metadata, stored in the archive.
+
+@table @option
+@opindex mode
+@item --mode=@var{permissions}
+
+When adding files to an archive, @command{tar} will use
+@var{permissions} for the archive members, rather than the permissions
+from the files. @var{permissions} can be specified either as an octal
+number or as symbolic permissions, like with
+@command{chmod} (@xref{File permissions, Permissions, File
+permissions, fileutils, @acronym{GNU} file utilities}. This reference
+also has useful information for those not being overly familiar with
+the UNIX permission system). Using latter syntax allows for
+more flexibility. For example, the value @samp{a+rw} adds read and write
+permissions for everybody, while retaining executable bits on directories
+or on any other file already marked as executable:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar --mode='a+rw' .}
+@end smallexample
+
+@item --mtime=@var{date}
+@opindex mtime
+
+When adding files to an archive, @command{tar} will use @var{date} as
+the modification time of members when creating archives, instead of
+their actual modification times. The argument @var{date} can be
+either a textual date representation in almost arbitrary format
+(@pxref{Date input formats}) or a name of an existing file, starting
+with @samp{/} or @samp{.}. In the latter case, the modification time
+of that file will be used.
+
+The following example will set the modification date to 00:00:00,
+January 1, 1970:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar --mtime='1970-01-01' .}
+@end smallexample
+
+@noindent
+When used with @option{--verbose} (@pxref{verbose tutorial}) @GNUTAR{}
+will try to convert the specified date back to its textual
+representation and compare it with the one given with
+@option{--mtime} options. If the two dates differ, @command{tar} will
+print a warning saying what date it will use. This is to help user
+ensure he is using the right date.
+
+For example:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar -v --mtime=yesterday .}
+tar: Option --mtime: Treating date `yesterday' as 2006-06-20
+13:06:29.152478
+@dots{}
+@end smallexample
+
+@item --owner=@var{user}
+@opindex owner
+
+Specifies that @command{tar} should use @var{user} as the owner of members
+when creating archives, instead of the user associated with the source
+file. The argument @var{user} can be either an existing user symbolic
+name, or a decimal numeric user @acronym{ID}.
+
+There is no value indicating a missing number, and @samp{0} usually means
+@code{root}. Some people like to force @samp{0} as the value to offer in
+their distributions for the owner of files, because the @code{root} user is
+anonymous anyway, so that might as well be the owner of anonymous
+archives. For example:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar --owner=0 .}
+@end smallexample
+
+@noindent
+or:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar --owner=root .}
+@end smallexample
+
+@item --group=@var{group}
+@opindex group
+
+Files added to the @command{tar} archive will have a group @acronym{ID} of @var{group},
+rather than the group from the source file. The argument @var{group}
+can be either an existing group symbolic name, or a decimal numeric group @acronym{ID}.
+@end table
+
@node Ignore Failed Read
@subsection Ignore Fail Read
@table @option
@item --ignore-failed-read
+@opindex ignore-failed-read
Do not exit with nonzero on unreadable files or directories.
@end table
@node extract options
@section Options Used by @option{--extract}
-@UNREVISED
-
-@FIXME{i need to get dan to go over these options with me and see if
-there's a better way of organizing them.}
+@cindex options for use with @option{--extract}
-The previous chapter showed how to use @value{op-extract} to extract
+@xopindex{extract, additional options}
+The previous chapter showed how to use @option{--extract} to extract
an archive into the file system. Various options cause @command{tar} to
extract more information than just file contents, such as the owner,
the permissions, the modification date, and so forth. This section
@node Reading
@subsection Options to Help Read Archives
@cindex Options when reading archives
+
@cindex Reading incomplete records
@cindex Records, incomplete
-@cindex End-of-archive entries, ignoring
-@cindex Ignoring end-of-archive entries
-@cindex Large lists of file names on small machines
-@cindex Small memory
-@cindex Running out of space
-@UNREVISED
-
+@opindex read-full-records
Normally, @command{tar} will request data in full record increments from
an archive storage device. If the device cannot return a full record,
@command{tar} will report an error. However, some devices do not always
return full records, or do not require the last record of an archive to
be padded out to the next record boundary. To keep reading until you
obtain a full record, or to accept an incomplete record if it contains
-an end-of-archive marker, specify the @value{op-read-full-records} option
-in conjunction with the @value{op-extract} or @value{op-list} operations.
-@value{xref-read-full-records}.
+an end-of-archive marker, specify the @option{--read-full-records} (@option{-B}) option
+in conjunction with the @option{--extract} or @option{--list} operations.
+@xref{Blocking}.
-The @value{op-read-full-records} option is turned on by default when
+The @option{--read-full-records} (@option{-B}) option is turned on by default when
@command{tar} reads an archive from standard input, or from a remote
-machine. This is because on BSD Unix systems, attempting to read a
+machine. This is because on @acronym{BSD} Unix systems, attempting to read a
pipe returns however much happens to be in the pipe, even if it is
less than was requested. If this option were not enabled, @command{tar}
would fail as soon as it read an incomplete record from the pipe.
If you're not sure of the blocking factor of an archive, you can
-read the archive by specifying @value{op-read-full-records} and
-@value{op-blocking-factor}, using a blocking factor larger than what the
-archive uses. This lets you avoid having to determine the blocking factor
-of an archive. @value{xref-blocking-factor}.
+read the archive by specifying @option{--read-full-records} (@option{-B}) and
+@option{--blocking-factor=@var{512-size}} (@option{-b
+@var{512-size}}), using a blocking factor larger than what the archive
+uses. This lets you avoid having to determine the blocking factor
+of an archive. @xref{Blocking Factor}.
@menu
* read full records::
@FIXME{need sentence or so of intro here}
@table @option
+@opindex read-full-records
@item --read-full-records
@item -B
-Use in conjunction with @value{op-extract} to read an archive which
-contains incomplete records, or one which has a blocking factor less
-than the one specified.
+Use in conjunction with @option{--extract} (@option{--get},
+@option{-x}) to read an archive which contains incomplete records, or
+one which has a blocking factor less than the one specified.
@end table
@node Ignore Zeros
@unnumberedsubsubsec Ignoring Blocks of Zeros
+@cindex End-of-archive blocks, ignoring
+@cindex Ignoring end-of-archive blocks
+@opindex ignore-zeros
Normally, @command{tar} stops reading when it encounters a block of zeros
between file entries (which usually indicates the end of the archive).
-@value{op-ignore-zeros} allows @command{tar} to completely read an archive
-which contains a block of zeros before the end (i.e., a damaged
-archive, or one that was created by concatenating several archives
-together).
+@option{--ignore-zeros} (@option{-i}) allows @command{tar} to
+completely read an archive which contains a block of zeros before the
+end (i.e., a damaged archive, or one that was created by concatenating
+several archives together).
-The @value{op-ignore-zeros} option is turned off by default because many
+The @option{--ignore-zeros} (@option{-i}) option is turned off by default because many
versions of @command{tar} write garbage after the end-of-archive entry,
since that part of the media is never supposed to be read. @GNUTAR{}
does not write after the end of an archive, but seeks to
-maintain compatiblity among archiving utilities.
+maintain compatibility among archiving utilities.
@table @option
@item --ignore-zeros
@itemx -i
To ignore blocks of zeros (i.e., end-of-archive entries) which may be
encountered while reading an archive. Use in conjunction with
-@value{op-extract} or @value{op-list}.
+@option{--extract} or @option{--list}.
@end table
@node Writing
@subsection Changing How @command{tar} Writes Files
-@cindex Overwriting old files, prevention
-@cindex Protecting old files
-@cindex Data modification times of extracted files
-@cindex Modification times of extracted files
-@cindex Permissions of extracted files
-@cindex Modes of extracted files
-@cindex Writing extracted files to standard output
-@cindex Standard output, writing extracted files to
@UNREVISED
-@FIXME{need to mention the brand new option, --backup}
+@FIXME{Introductory paragraph}
@menu
* Dealing with Old Files::
* Recursive Unlink::
* Data Modification Times::
* Setting Access Permissions::
+* Directory Modification Times and Permissions::
* Writing to Standard Output::
+* Writing to an External Program::
* remove files::
@end menu
@node Dealing with Old Files
@unnumberedsubsubsec Options Controlling the Overwriting of Existing Files
+@xopindex{overwrite-dir, introduced}
When extracting files, if @command{tar} discovers that the extracted
file already exists, it normally replaces the file by removing it before
extracting it, to prevent confusion in the presence of hard or symbolic
default behavior. To be more cautious and preserve the metadata of
such a directory, use the @option{--no-overwrite-dir} option.
+@cindex Overwriting old files, prevention
+@xopindex{keep-old-files, introduced}
To be even more cautious and prevent existing files from being replaced, use
-the @value{op-keep-old-files} option. It causes @command{tar} to refuse
+the @option{--keep-old-files} (@option{-k}) option. It causes @command{tar} to refuse
to replace or update a file that already exists, i.e., a file with the
same name as an archive member prevents extraction of that archive
member. Instead, it reports an error.
+@xopindex{overwrite, introduced}
To be more aggressive about altering existing files, use the
-@value{op-overwrite} option. It causes @command{tar} to overwrite
+@option{--overwrite} option. It causes @command{tar} to overwrite
existing files and to follow existing symbolic links when extracting.
+@cindex Protecting old files
Some people argue that @GNUTAR{} should not hesitate
to overwrite files with other files when extracting. When extracting
a @command{tar} archive, they expect to see a faithful copy of the
(unless it @emph{also} simultaneously restores the full
@file{/usr/local2}, of course!) @GNUTAR{} is indeed
able to remove a whole hierarchy to reestablish a symbolic link, for
-example, but @emph{only if} @value{op-recursive-unlink} is specified
+example, but @emph{only if} @option{--recursive-unlink} is specified
to allow this behavior. In any case, single files are silently
removed.
-Finally, the @value{op-unlink-first} option can improve performance in
+@xopindex{unlink-first, introduced}
+Finally, the @option{--unlink-first} (@option{-U}) option can improve performance in
some cases by causing @command{tar} to remove files unconditionally
before extracting them.
@unnumberedsubsubsec Overwrite Old Files
@table @option
+@opindex overwrite
@item --overwrite
Overwrite existing files and directory metadata when extracting files
from an archive.
-This
-causes @command{tar} to write extracted files into the file system without
+This causes @command{tar} to write extracted files into the file system without
regard to the files already on the system; i.e., files with the same
names as archive members are overwritten when the archive is extracted.
It also causes @command{tar} to extract the ownership, permissions,
empty directories and even symbolic links are automatically removed if
they are in the way of extraction.
-Be careful when using the @value{op-overwrite} option, particularly when
-combined with the @value{op-absolute-names} option, as this combination
+Be careful when using the @option{--overwrite} option, particularly when
+combined with the @option{--absolute-names} (@option{-P}) option, as this combination
can change the contents, ownership or permissions of any file on your
system. Also, many systems do not take kindly to overwriting files that
are currently being executed.
+@opindex overwrite-dir
@item --overwrite-dir
Overwrite the metadata of directories when extracting files from an
archive, but remove other files before extracting.
@unnumberedsubsubsec Keep Old Files
@table @option
+@opindex keep-old-files
@item --keep-old-files
@itemx -k
Do not replace existing files from archive. The
-@value{op-keep-old-files} option prevents @command{tar} from replacing
-existing files with files with the same name from the archive.
-The @value{op-keep-old-files} option is meaningless with @value{op-list}.
-Prevents @command{tar} from replacing files in the file system during
-extraction.
+@option{--keep-old-files} (@option{-k}) option prevents @command{tar}
+from replacing existing files with files with the same name from the
+archive. The @option{--keep-old-files} option is meaningless with
+@option{--list} (@option{-t}). Prevents @command{tar} from replacing
+files in the file system during extraction.
@end table
@node Keep Newer Files
@unnumberedsubsubsec Keep Newer Files
@table @option
+@opindex keep-newer-files
@item --keep-newer-files
Do not replace existing files that are newer than their archive
-copies. This option is meaningless with @value{op-list}.
+copies. This option is meaningless with @option{--list} (@option{-t}).
@end table
@node Unlink First
@unnumberedsubsubsec Unlink First
@table @option
+@opindex unlink-first
@item --unlink-first
@itemx -U
Remove files before extracting over them.
@unnumberedsubsubsec Recursive Unlink
@table @option
+@opindex recursive-unlink
@item --recursive-unlink
When this option is specified, try removing files and directory hierarchies
before extracting over them. @emph{This is a dangerous option!}
@end table
-If you specify the @value{op-recursive-unlink} option,
+If you specify the @option{--recursive-unlink} option,
@command{tar} removes @emph{anything} that keeps you from extracting a file
as far as current permissions will allow it. This could include removal
of the contents of a full directory hierarchy.
@node Data Modification Times
@unnumberedsubsubsec Setting Data Modification Times
+@cindex Data modification times of extracted files
+@cindex Modification times of extracted files
Normally, @command{tar} sets the data modification times of extracted
files to the corresponding times recorded for the files in the archive, but
limits the permissions of extracted files by the current @code{umask}
setting.
To set the data modification times of extracted files to the time when
-the files were extracted, use the @value{op-touch} option in
-conjunction with @value{op-extract}.
+the files were extracted, use the @option{--touch} (@option{-m}) option in
+conjunction with @option{--extract} (@option{--get}, @option{-x}).
@table @option
+@opindex touch
@item --touch
@itemx -m
Sets the data modification time of extracted archive members to the time
they were extracted, not the time recorded for them in the archive.
-Use in conjunction with @value{op-extract}.
+Use in conjunction with @option{--extract} (@option{--get}, @option{-x}).
@end table
@node Setting Access Permissions
@unnumberedsubsubsec Setting Access Permissions
+@cindex Permissions of extracted files
+@cindex Modes of extracted files
To set the modes (access permissions) of extracted files to those
recorded for those files in the archive, use @option{--same-permissions}
-in conjunction with the @value{op-extract} operation. @FIXME{Should be
-aliased to ignore-umask.}
+in conjunction with the @option{--extract} (@option{--get},
+@option{-x}) operation.
@table @option
-@item --preserve-permission
-@itemx --same-permission
-@itemx --ignore-umask
+@opindex preserve-permissions
+@opindex same-permissions
+@item --preserve-permissions
+@itemx --same-permissions
+@c @itemx --ignore-umask
@itemx -p
Set modes of extracted archive members to those recorded in the
archive, instead of current umask settings. Use in conjunction with
-@value{op-extract}.
+@option{--extract} (@option{--get}, @option{-x}).
@end table
-@FIXME{Following paragraph needs to be rewritten: why doesn't this cat
-files together, why is this useful. is it really useful with
-more than one file?}
+@node Directory Modification Times and Permissions
+@unnumberedsubsubsec Directory Modification Times and Permissions
+
+After successfully extracting a file member, @GNUTAR{} normally
+restores its permissions and modification times, as described in the
+previous sections. This cannot be done for directories, because
+after extracting a directory @command{tar} will almost certainly
+extract files into that directory and this will cause the directory
+modification time to be updated. Moreover, restoring that directory
+permissions may not permit file creation within it. Thus, restoring
+directory permissions and modification times must be delayed at least
+until all files have been extracted into that directory. @GNUTAR{}
+restores directories using the following approach.
+
+The extracted directories are created with the mode specified in the
+archive, as modified by the umask of the user, which gives sufficient
+permissions to allow file creation. The meta-information about the
+directory is recorded in the temporary list of directories. When
+preparing to extract next archive member, @GNUTAR{} checks if the
+directory prefix of this file contains the remembered directory. If
+it does not, the program assumes that all files have been extracted
+into that directory, restores its modification time and permissions
+and removes its entry from the internal list. This approach allows
+to correctly restore directory meta-information in the majority of
+cases, while keeping memory requirements sufficiently small. It is
+based on the fact, that most @command{tar} archives use the predefined
+order of members: first the directory, then all the files and
+subdirectories in that directory.
+
+However, this is not always true. The most important exception are
+incremental archives (@pxref{Incremental Dumps}). The member order in
+an incremental archive is reversed: first all directory members are
+stored, followed by other (non-directory) members. So, when extracting
+from incremental archives, @GNUTAR{} alters the above procedure. It
+remembers all restored directories, and restores their meta-data
+only after the entire archive has been processed. Notice, that you do
+not need to specify any special options for that, as @GNUTAR{}
+automatically detects archives in incremental format.
+
+There may be cases, when such processing is required for normal archives
+too. Consider the following example:
+
+@smallexample
+@group
+$ @kbd{tar --no-recursion -cvf archive \
+ foo foo/file1 bar bar/file foo/file2}
+foo/
+foo/file1
+bar/
+bar/file
+foo/file2
+@end group
+@end smallexample
+
+During the normal operation, after encountering @file{bar}
+@GNUTAR{} will assume that all files from the directory @file{foo}
+were already extracted and will therefore restore its timestamp and
+permission bits. However, after extracting @file{foo/file2} the
+directory timestamp will be offset again.
+
+To correctly restore directory meta-information in such cases, use
+the @option{--delay-directory-restore} command line option:
+
+@table @option
+@opindex delay-directory-restore
+@item --delay-directory-restore
+Delays restoring of the modification times and permissions of extracted
+directories until the end of extraction. This way, correct
+meta-information is restored even if the archive has unusual member
+ordering.
+
+@opindex no-delay-directory-restore
+@item --no-delay-directory-restore
+Cancel the effect of the previous @option{--delay-directory-restore}.
+Use this option if you have used @option{--delay-directory-restore} in
+@env{TAR_OPTIONS} variable (@pxref{TAR_OPTIONS}) and wish to
+temporarily disable it.
+@end table
@node Writing to Standard Output
@unnumberedsubsubsec Writing to Standard Output
+@cindex Writing extracted files to standard output
+@cindex Standard output, writing extracted files to
To write the extracted files to the standard output, instead of
-creating the files on the file system, use @value{op-to-stdout} in
-conjunction with @value{op-extract}. This option is useful if you are
+creating the files on the file system, use @option{--to-stdout} (@option{-O}) in
+conjunction with @option{--extract} (@option{--get}, @option{-x}). This option is useful if you are
extracting files to send them through a pipe, and do not need to
preserve them in the file system. If you extract multiple members,
they appear on standard output concatenated, in the order they are
found in the archive.
@table @option
+@opindex to-stdout
@item --to-stdout
@itemx -O
-Writes files to the standard output. Used in conjunction with
-@value{op-extract}. Extract files to standard output. When this option
-is used, instead of creating the files specified, @command{tar} writes
+Writes files to the standard output. Use only in conjunction with
+@option{--extract} (@option{--get}, @option{-x}). When this option is
+used, instead of creating the files specified, @command{tar} writes
the contents of the files extracted to its standard output. This may
be useful if you are only extracting the files in order to send them
-through a pipe. This option is meaningless with @value{op-list}.
+through a pipe. This option is meaningless with @option{--list}
+(@option{-t}).
@end table
This can be useful, for example, if you have a tar archive containing
tar -xOzf foo.tgz bigfile1 bigfile2 | process
@end smallexample
-@node remove files
-@unnumberedsubsubsec Removing Files
+However, @option{--to-command} may be more convenient for use with
+multiple files. See the next section.
+
+@node Writing to an External Program
+@unnumberedsubsubsec Writing to an External Program
-@FIXME{the various macros in the front of the manual think that this
-option goes in this section. i have no idea; i only know it's nowhere
-else in the book...}
+You can instruct @command{tar} to send the contents of each extracted
+file to the standard input of an external program:
@table @option
-@item --remove-files
-Remove files after adding them to the archive.
+@opindex to-command
+@item --to-command=@var{command}
+Extract files and pipe their contents to the standard input of
+@var{command}. When this option is used, instead of creating the
+files specified, @command{tar} invokes @var{command} and pipes the
+contents of the files to its standard output. The @var{command} may
+contain command line arguments. The program is executed via
+@code{sh -c}. Notice, that @var{command} is executed once for each regular file
+extracted. Non-regular files (directories, etc.) are ignored when this
+option is used.
@end table
-@node Scarce
-@subsection Coping with Scarce Resources
-@cindex Middle of the archive, starting in the
-@cindex Running out of space during extraction
-@cindex Disk space, running out of
-@cindex Space on the disk, recovering from lack of
-@UNREVISED
+The command can obtain the information about the file it processes
+from the following environment variables:
+
+@table @env
+@vrindex TAR_FILETYPE, to-command environment
+@item TAR_FILETYPE
+Type of the file. It is a single letter with the following meaning:
+
+@multitable @columnfractions 0.10 0.90
+@item f @tab Regular file
+@item d @tab Directory
+@item l @tab Symbolic link
+@item h @tab Hard link
+@item b @tab Block device
+@item c @tab Character device
+@end multitable
-@menu
-* Starting File::
-* Same Order::
-@end menu
+Currently only regular files are supported.
-@node Starting File
-@unnumberedsubsubsec Starting File
+@vrindex TAR_MODE, to-command environment
+@item TAR_MODE
+File mode, an octal number.
-@table @option
-@item --starting-file=@var{name}
-@itemx -K @var{name}
-Starts an operation in the middle of an archive. Use in conjunction
-with @value{op-extract} or @value{op-list}.
-@end table
+@vrindex TAR_FILENAME, to-command environment
+@item TAR_FILENAME
+The name of the file.
-If a previous attempt to extract files failed due to lack of disk
-space, you can use @value{op-starting-file} to start extracting only
-after member @var{name} of the archive. This assumes, of course, that
-there is now free space, or that you are now extracting into a
-different file system. (You could also choose to suspend @command{tar},
-remove unnecessary files from the file system, and then restart the
-same @command{tar} operation. In this case, @value{op-starting-file} is
-not necessary. @value{xref-incremental}, @value{xref-interactive},
-and @value{ref-exclude}.)
+@vrindex TAR_REALNAME, to-command environment
+@item TAR_REALNAME
+Name of the file as stored in the archive.
-@node Same Order
-@unnumberedsubsubsec Same Order
+@vrindex TAR_UNAME, to-command environment
+@item TAR_UNAME
+Name of the file owner.
-@table @option
+@vrindex TAR_GNAME, to-command environment
+@item TAR_GNAME
+Name of the file owner group.
+
+@vrindex TAR_ATIME, to-command environment
+@item TAR_ATIME
+Time of last access. It is a decimal number, representing seconds
+since the Epoch. If the archive provides times with nanosecond
+precision, the nanoseconds are appended to the timestamp after a
+decimal point.
+
+@vrindex TAR_MTIME, to-command environment
+@item TAR_MTIME
+Time of last modification.
+
+@vrindex TAR_CTIME, to-command environment
+@item TAR_CTIME
+Time of last status change.
+
+@vrindex TAR_SIZE, to-command environment
+@item TAR_SIZE
+Size of the file.
+
+@vrindex TAR_UID, to-command environment
+@item TAR_UID
+UID of the file owner.
+
+@vrindex TAR_GID, to-command environment
+@item TAR_GID
+GID of the file owner.
+@end table
+
+Additionally, the following variables contain information about
+tar mode and the archive being processed:
+
+@table @env
+@vrindex TAR_VERSION, to-command environment
+@item TAR_VERSION
+@GNUTAR{} version number.
+
+@vrindex TAR_ARCHIVE, to-command environment
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_BLOCKING_FACTOR, to-command environment
+@item TAR_BLOCKING_FACTOR
+Current blocking factor (@pxref{Blocking}).
+
+@vrindex TAR_VOLUME, to-command environment
+@item TAR_VOLUME
+Ordinal number of the volume @command{tar} is processing.
+
+@vrindex TAR_FORMAT, to-command environment
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+@end table
+
+If @var{command} exits with a non-0 status, @command{tar} will print
+an error message similar to the following:
+
+@smallexample
+tar: 2345: Child returned status 1
+@end smallexample
+
+Here, @samp{2345} is the PID of the finished process.
+
+If this behavior is not wanted, use @option{--ignore-command-error}:
+
+@table @option
+@opindex ignore-command-error
+@item --ignore-command-error
+Ignore exit codes of subprocesses. Notice that if the program
+exits on signal or otherwise terminates abnormally, the error message
+will be printed even if this option is used.
+
+@opindex no-ignore-command-error
+@item --no-ignore-command-error
+Cancel the effect of any previous @option{--ignore-command-error}
+option. This option is useful if you have set
+@option{--ignore-command-error} in @env{TAR_OPTIONS}
+(@pxref{TAR_OPTIONS}) and wish to temporarily cancel it.
+@end table
+
+@node remove files
+@unnumberedsubsubsec Removing Files
+
+@FIXME{The section is too terse. Something more to add? An example,
+maybe?}
+
+@table @option
+@opindex remove-files
+@item --remove-files
+Remove files after adding them to the archive.
+@end table
+
+@node Scarce
+@subsection Coping with Scarce Resources
+@UNREVISED
+
+@cindex Small memory
+@cindex Running out of space
+
+@menu
+* Starting File::
+* Same Order::
+@end menu
+
+@node Starting File
+@unnumberedsubsubsec Starting File
+
+@table @option
+@opindex starting-file
+@item --starting-file=@var{name}
+@itemx -K @var{name}
+Starts an operation in the middle of an archive. Use in conjunction
+with @option{--extract} (@option{--get}, @option{-x}) or @option{--list} (@option{-t}).
+@end table
+
+@cindex Middle of the archive, starting in the
+If a previous attempt to extract files failed due to lack of disk
+space, you can use @option{--starting-file=@var{name}} (@option{-K
+@var{name}}) to start extracting only after member @var{name} of the
+archive. This assumes, of course, that there is now free space, or
+that you are now extracting into a different file system. (You could
+also choose to suspend @command{tar}, remove unnecessary files from
+the file system, and then resume the same @command{tar} operation.
+In this case, @option{--starting-file} is not necessary.) See also
+@ref{interactive}, and @ref{exclude}.
+
+@node Same Order
+@unnumberedsubsubsec Same Order
+
+@table @option
+@cindex Large lists of file names on small machines
+@opindex same-order
+@opindex preserve-order
@item --same-order
@itemx --preserve-order
@itemx -s
To process large lists of file names on machines with small amounts of
-memory. Use in conjunction with @value{op-compare},
-@value{op-list}
-or @value{op-extract}.
+memory. Use in conjunction with @option{--compare} (@option{--diff},
+@option{-d}), @option{--list} (@option{-t}) or @option{--extract}
+(@option{--get}, @option{-x}).
@end table
-@FIXME{we don't need/want --preserve to exist any more (from melissa:
-ie, don't want that *version* of the option to exist, or don't want
-the option to exist in either version?}
-
-@FIXME{i think this explanation is lacking.}
-
-The @value{op-same-order} option tells @command{tar} that the list of file
+The @option{--same-order} (@option{--preserve-order}, @option{-s}) option tells @command{tar} that the list of file
names to be listed or extracted is sorted in the same order as the
files in the archive. This allows a large list of names to be used,
even on a small machine that would not otherwise be able to hold all
Backup options may prove unexpectedly useful when extracting archives
containing many members having identical name, or when extracting archives
on systems having file name limitations, making different members appear
-has having similar names through the side-effect of name truncation.
-(This is true only if we have a good scheme for truncated backup names,
-which I'm not sure at all: I suspect work is needed in this area.)
+as having similar names through the side-effect of name truncation.
+@FIXME{This is true only if we have a good scheme for truncated backup names,
+which I'm not sure at all: I suspect work is needed in this area.}
When any existing file is backed up before being overwritten by extraction,
then clashing files are automatically be renamed to be unique, and the
true name is kept for only the last file of a series of clashing files.
file are kept.
@table @samp
-
@item --backup[=@var{method}]
-@opindex --backup
+@opindex backup
@vindex VERSION_CONTROL
@cindex backups
Back up files that are about to be overwritten or removed.
@table @samp
@item t
@itemx numbered
-@opindex numbered @r{backup method}
+@cindex numbered @r{backup method}
Always make numbered backups.
@item nil
@itemx existing
-@opindex existing @r{backup method}
+@cindex existing @r{backup method}
Make numbered backups of files that already have them, simple backups
of the others.
@item never
@itemx simple
-@opindex simple @r{backup method}
+@cindex simple @r{backup method}
Always make simple backups.
@end table
@item --suffix=@var{suffix}
-@opindex --suffix
+@opindex suffix
@cindex backup suffix
@vindex SIMPLE_BACKUP_SUFFIX
Append @var{suffix} to each backup file made with @option{--backup}. If this
@end table
-Some people express the desire to @emph{always} use the @value{op-backup}
-option, by defining some kind of alias or script. This is not as easy
-as one may think, due to the fact that old style options should appear first
-and consume arguments a bit unpredictably for an alias or script. But,
-if you are ready to give up using old style options, you may resort to
-using something like (a Bourne shell function here):
-
-@smallexample
-tar () @{ /usr/local/bin/tar --backup $*; @}
-@end smallexample
-
@node Applications
@section Notable @command{tar} Usages
@UNREVISED
For example, here is how you might copy a directory's contents from
one disk to another, while preserving the dates, modes, owners and
link-structure of all the files therein. In this case, the transfer
-medium is a @dfn{pipe}, which is one a Unix redirection mechanism:
+medium is a @dfn{pipe}:
+
+@smallexample
+$ @kbd{(cd sourcedir; tar -cf - .) | (cd targetdir; tar -xf -)}
+@end smallexample
+
+@noindent
+You can avoid subshells by using @option{-C} option:
+
+@smallexample
+$ @kbd{tar -C sourcedir -cf - . | tar -C targetdir -xf -}
+@end smallexample
+
+@noindent
+The command also works using long option forms:
@smallexample
-$ @kbd{cd sourcedir; tar -cf - . | (cd targetdir; tar -xf -)}
+@group
+$ @kbd{(cd sourcedir; tar --create --file=- . ) \
+ | (cd targetdir; tar --extract --file=-)}
+@end group
@end smallexample
@noindent
-The command also works using short option forms:
+or
@smallexample
-$ @w{@kbd{cd sourcedir; tar --create --file=- . | (cd targetdir; tar --extract --file=-)}}
+@group
+$ @kbd{tar --directory sourcedir --create --file=- . \
+ | tar --directory targetdir --extract --file=-}
+@end group
@end smallexample
@noindent
If there are too many files to conveniently list on the command line,
you can list the names in a file, and @command{tar} will read that file.
-@value{xref-files-from}.
+@xref{files}.
There are various ways of causing @command{tar} to skip over some files,
and not archive them. @xref{Choosing}.
@node Backups
@chapter Performing Backups and Restoring Files
-@UNREVISED
+@cindex backups
-@GNUTAR{} is distributed along with the scripts
-which the Free Software Foundation uses for performing backups. There
-is no corresponding scripts available yet for doing restoration of
-files. Even if there is a good chance those scripts may be satisfying
-to you, they are not the only scripts or methods available for doing
+@GNUTAR{} is distributed along with the scripts for performing backups
+and restores. Even if there is a good chance those scripts may be
+satisfying to you, they are not the only scripts or methods available for doing
backups and restore. You may well create your own, or use more
sophisticated packages dedicated to that purpose.
Some users are enthusiastic about @code{Amanda} (The Advanced Maryland
Automatic Network Disk Archiver), a backup system developed by James
da Silva @file{jds@@cs.umd.edu} and available on many Unix systems.
-This is free software, and it is available at these places:
-
-@smallexample
-http://www.cs.umd.edu/projects/amanda/amanda.html
-ftp://ftp.cs.umd.edu/pub/amanda
-@end smallexample
+This is free software, and it is available from @uref{http://www.amanda.org}.
@FIXME{
have to. (Files not being modified are written with no trouble, and do
not corrupt the entire archive.)
-You will want to use the @value{op-label} option to give the archive a
+You will want to use the @option{--label=@var{archive-label}}
+(@option{-V @var{archive-label}}) option to give the archive a
volume label, so you can tell what this archive is even if the label
falls off the tape, or anything like that.
Unless the file system you are dumping is guaranteed to fit on
-one volume, you will need to use the @value{op-multi-volume} option.
+one volume, you will need to use the @option{--multi-volume} (@option{-M}) option.
Make sure you have enough tapes on hand to complete the backup.
If you want to dump each file system separately you will need to use
-the @value{op-one-file-system} option to prevent @command{tar} from crossing
-file system boundaries when storing (sub)directories.
-
-The @value{op-incremental} (@FIXME-pxref{}) option is not needed,
-since this is a complete copy of everything in the file system, and a
-full restore from this backup would only be done onto a completely
+the @option{--one-file-system} option to prevent
+@command{tar} from crossing file system boundaries when storing
+(sub)directories.
+
+The @option{--incremental} (@option{-G}) (@pxref{Incremental Dumps})
+option is not needed, since this is a complete copy of everything in
+the file system, and a full restore from this backup would only be
+done onto a completely
empty disk.
Unless you are in a hurry, and trust the @command{tar} program (and your
-tapes), it is a good idea to use the @value{op-verify} option, to make
-sure your files really made it onto the dump properly. This will
-also detect cases where the file was modified while (or just after)
-it was being archived. Not all media (notably cartridge tapes) are
-capable of being verified, unfortunately.
+tapes), it is a good idea to use the @option{--verify} (@option{-W})
+option, to make sure your files really made it onto the dump properly.
+This will also detect cases where the file was modified while (or just
+after) it was being archived. Not all media (notably cartridge tapes)
+are capable of being verified, unfortunately.
@node Incremental Dumps
@section Using @command{tar} to Perform Incremental Dumps
can be restored when extracting the archive.
@GNUTAR{} currently offers two options for handling incremental
-backups: @value{op-listed-incremental} and @value{op-incremental}.
+backups: @option{--listed-incremental=@var{snapshot-file}} (@option{-g
+@var{snapshot-file}}) and @option{--incremental} (@option{-G}).
+@xopindex{listed-incremental, described}
The option @option{--listed-incremental} instructs tar to operate on
an incremental archive with additional metadata stored in a standalone
file, called a @dfn{snapshot file}. The purpose of this file is to help
/usr}
@end smallexample
+@anchor{--level=0}
+@xopindex{level, described}
+You can force @samp{level 0} backups either by removing the snapshot
+file before running @command{tar}, or by supplying the
+@option{--level=0} option, e.g.:
+
+@smallexample
+$ @kbd{tar --create \
+ --file=archive.2.tar \
+ --listed-incremental=/var/log/usr.snar-0 \
+ --level=0 \
+ /usr}
+@end smallexample
+
Incremental dumps depend crucially on time stamps, so the results are
unreliable if you modify a file's time stamps during dumping (e.g.,
with the @option{--atime-preserve=replace} option), or if you set the clock
backwards.
+@anchor{device numbers}
+@cindex Device numbers, using in incremental backups
Metadata stored in snapshot files include device numbers, which,
-obviously is supposed to be a non-volatile value. However, it turns
-out that NFS devices have undependable values when an automounter
+obviously are supposed to be non-volatile values. However, it turns
+out that @acronym{NFS} devices have undependable values when an automounter
gets in the picture. This can lead to a great deal of spurious
redumping in incremental dumps, so it is somewhat useless to compare
-two NFS devices numbers over time. The solution implemented currently
-is to considers all NFS devices as being equal when it comes to
-comparing directories; this is fairly gross, but there does not seem
-to be a better way to go.
+two @acronym{NFS} devices numbers over time. The solution implemented
+currently is to consider all @acronym{NFS} devices as being equal
+when it comes to comparing directories; this is fairly gross, but
+there does not seem to be a better way to go.
+
+Apart from using @acronym{NFS}, there are a number of cases where
+relying on device numbers can cause spurious redumping of unmodified
+files. For example, this occurs when archiving @acronym{LVM} snapshot
+volumes. To avoid this, use @option{--no-check-device} option:
+
+@table @option
+@xopindex{no-check-device, described}
+@item --no-check-device
+Do not rely on device numbers when preparing a list of changed files
+for an incremental dump.
+
+@xopindex{check-device, described}
+@item --check-device
+Use device numbers when preparing a list of changed files
+for an incremental dump. This is the default behavior. The purpose
+of this option is to undo the effect of the @option{--no-check-device}
+if it was given in @env{TAR_OPTIONS} environment variable
+(@pxref{TAR_OPTIONS}).
+@end table
+
+There is also another way to cope with changing device numbers. It is
+described in detail in @ref{Fixing Snapshot Files}.
Note that incremental archives use @command{tar} extensions and may
not be readable by non-@acronym{GNU} versions of the @command{tar} program.
+@xopindex{listed-incremental, using with @option{--extract}}
+@xopindex{extract, using with @option{--listed-incremental}}
To extract from the incremental dumps, use
@option{--listed-incremental} together with @option{--extract}
option (@pxref{extracting files}). In this case, @command{tar} does
Alternatively, you can use @option{--incremental}, which needs no
arguments. In general, @option{--incremental} (@option{-G}) can be
used as a shortcut for @option{--listed-incremental} when listing or
-extracting incremental backups (for more information, regarding this
+extracting incremental backups (for more information regarding this
option, @pxref{incremental-op}).
When extracting from the incremental backup @GNUTAR{} attempts to
the last level was created, you will need to restore from all backups
in turn. Continuing our example, to restore the state of @file{/usr}
file system, one would do@footnote{Notice, that since both archives
-were created withouth @option{-P} option (@pxref{absolute}), these
+were created without @option{-P} option (@pxref{absolute}), these
commands should be run from the root file system.}:
@smallexample
verbose listing output (@option{--list --verbose}) when using in
scripts.
+@xopindex{incremental, using with @option{--list}}
+@xopindex{listed-incremental, using with @option{--list}}
+@xopindex{list, using with @option{--incremental}}
+@xopindex{list, using with @option{--listed-incremental}}
Versions of @GNUTAR{} up to 1.15.1 used to dump verbatim binary
contents of the DUMPDIR header (with terminating nulls) when
@option{--incremental} or @option{--listed-incremental} option was
given, no matter what the verbosity level. This behavior, and,
-especially, the binary output it produced were considered incovenient
-and were changed in version 1.16}:
+especially, the binary output it produced were considered inconvenient
+and were changed in version 1.16.}:
@smallexample
@kbd{tar --list --incremental --verbose --verbose archive.tar}
where @var{x} is a letter describing the status of the file: @samp{Y}
if the file is present in the archive, @samp{N} if the file is not
included in the archive, or a @samp{D} if the file is a directory (and
-is included in the archive).@FIXME-xref{dumpdir format}. Each such
+is included in the archive). @xref{Dumpdir}, for the detailed
+description of dumpdirs and status codes. Each such
line is terminated by a newline character. The last line is followed
by an additional newline to indicate the end of the data.
only extracting two archives---the last weekly (full) dump and the
last daily (level one) dump. The only information lost would be in
files changed or created since the last daily backup. (Doing dumps
-more than once a day is usually not worth the trouble).
+more than once a day is usually not worth the trouble.)
@GNUTAR{} comes with scripts you can use to do full
and level-one (actually, even level-two and so on) dumps. Using
Before you use these scripts, you need to edit the file
@file{backup-specs}, which specifies parameters used by the backup
scripts and by the restore script. This file is usually located
-in @file{/etc/backup} directory. @FIXME-xref{Script Syntax} Once the
-backup parameters are set, you can perform backups or restoration by
-running the appropriate script.
+in @file{/etc/backup} directory. @xref{Backup Parameters}, for its
+detailed description. Once the backup parameters are set, you can
+perform backups or restoration by running the appropriate script.
The name of the backup script is @code{backup}. The name of the
restore script is @code{restore}. The following sections describe
designed to be used together. While it is possible to restore files by
hand from an archive which was created using a backup script, and to create
an archive by hand which could then be extracted using the restore script,
-it is easier to use the scripts. @value{xref-incremental}, before
+it is easier to use the scripts. @xref{Incremental Dumps}, before
making such an attempt.
@node Backup Parameters
@defvr {Backup variable} BLOCKING
The blocking factor @command{tar} will use when writing the dump archive.
-@value{xref-blocking-factor}.
+@xref{Blocking Factor}.
@end defvr
@defvr {Backup variable} BACKUP_DIRS
the host machine must have @GNUTAR{} installed, and
must be able to access the directory containing the backup scripts and
their support files using the same file name that is used on the
-machine where the scripts are run (ie. what @command{pwd} will print
+machine where the scripts are run (i.e., what @command{pwd} will print
when in that directory on that machine). If the host that contains
the file system does not have this capability, you can specify another
-host as long as it can access the file system through NFS.
+host as long as it can access the file system through @acronym{NFS}.
If the list of file systems is very long you may wish to put it
in a separate file. This file is usually named
@defvr {Backup variable} DIRLIST
-A path to the file containing the list of the file systems to backup
+The name of the file that contains a list of file systems to backup
or restore. By default it is @file{/etc/backup/dirs}.
@end defvr
(for @code{restore}). These should be accessible from the machine on
which the backup script is run.
-If the list of file systems is very long you may wish to store it
+If the list of individual files is very long you may wish to store it
in a separate file. This file is usually named
@file{/etc/backup/files}, but this name may be overridden in
@file{backup-specs} using @code{FILELIST} variable.
@defvr {Backup variable} FILELIST
-A path to the file containing the list of the individual files to backup
+The name of the file that contains a list of individual files to backup
or restore. By default it is @file{/etc/backup/files}.
@end defvr
@defvr {Backup variable} RSH_COMMAND
-Full file name of @command{rsh} binary on remote mashines. This will
+Full file name of @command{rsh} binary on remote machines. This will
be passed via @option{--rsh-command} option to the remote invocation
of @GNUTAR{}.
@end defvr
Script to be run when it's time to insert a new tape in for the next
volume. Administrators may want to tailor this script for their site.
-If this variable isn't set, @GNUTAR{} will display its built-in prompt
-@FIXME-xref{describe it somewhere!}, and will expect confirmation from
-the console.
+If this variable isn't set, @GNUTAR{} will display its built-in
+prompt, and will expect confirmation from the console. For the
+description of the default prompt, see @ref{change volume prompt}.
+
@end defvr
@defvr {Backup variable} SLEEP_MESSAGE
@subsection Magnetic Tape Control
Backup scripts access tape device using special @dfn{hook functions}.
-These functions take a single argument -- the name of the tape
+These functions take a single argument --- the name of the tape
device. Their names are kept in the following variables:
@defvr {Backup variable} MT_BEGIN
Name or IP address of the host machine being dumped or restored.
@item fs
-Full path name to the file system being dumped or restored.
+Full file name of the file system being dumped or restored.
@item fsname
File system name with directory separators replaced with colons. This
@end table
@end deffn
-Following variables keep the names of user hook functions
+Following variables keep the names of user hook functions:
@defvr {Backup variable} DUMP_BEGIN
Dump begin function. It is executed before dumping the file system.
backup --level=@var{level} --time=@var{time}
@end smallexample
-The @option{level} option requests the dump level. Thus, to produce
+The @option{--level} option requests the dump level. Thus, to produce
a full dump, specify @code{--level=0} (this is the default, so
-@option{--level} may be omitted if its value is @code{0}).
-@footnote{For backward compatibility, the @code{backup} will also
+@option{--level} may be omitted if its value is
+@code{0})@footnote{For backward compatibility, the @code{backup} will also
try to deduce the requested dump level from the name of the
script itself. If the name consists of a string @samp{level-}
followed by a single decimal digit, that digit is taken as
the dump level number. Thus, you may create a link from @code{backup}
to @code{level-1} and then run @code{level-1} whenever you need to
-create a level one dump.}
+create a level one dump.}.
The @option{--time} option determines when should the backup be
run. @var{Time} may take three forms:
@item @var{hh}
-The dump must be run at @var{hh} hours
+The dump must be run at @var{hh} hours.
@item now
record file in @file{/etc/tar-backup/}, which is used by the scripts
to store and retrieve information about which files were dumped. This
file is not meant to be read by humans, and should not be deleted by
-them. @FIXME-xref{incremental and listed-incremental, for a more
-detailed explanation of this file.}
+them. @xref{Snapshot Files}, for a more detailed explanation of this
+file.
The second file is a log file containing the names of the file systems
and files dumped, what time the backup was made, and any error
@item -v[@var{level}]
@itemx --verbose[=@var{level}]
Set verbosity level. The higher the level is, the more debugging
-information will be output during execution. Devault @var{level}
+information will be output during execution. Default @var{level}
is 100, which means the highest debugging level.
@item -t @var{start-time}
@itemx --help
Display short help message and exit.
-@item -L
-@itemx --license
-Display program license and exit.
-
@item -V
@itemx --version
-Display program version and exit.
+Display information about the program's name, version, origin and legal
+status, all on standard output, and then exit successfully.
@end table
@file{backup-specs} (@pxref{General-Purpose Variables,BACKUP_DIRS}).
You may select the file systems (and/or files) to restore by
-giving @code{restore} list of @dfn{patterns} in its command
+giving @code{restore} a list of @dfn{patterns} in its command
line. For example, running
@smallexample
@table @option
@item -a
@itemx --all
-Restore all file systems and files specified in @file{backup-specs}
+Restore all file systems and files specified in @file{backup-specs}.
@item -l @var{level}
@itemx --level=@var{level}
@item -v[@var{level}]
@itemx --verbose[=@var{level}]
Set verbosity level. The higher the level is, the more debugging
-information will be output during execution. Devault @var{level}
+information will be output during execution. Default @var{level}
is 100, which means the highest debugging level.
@item -h
@itemx --help
Display short help message and exit.
-@item -L
-@itemx --license
-Display program license and exit.
-
@item -V
@itemx --version
-Display program version and exit.
+Display information about the program's name, version, origin and legal
+status, all on standard output, and then exit successfully.
@end table
You should start the restore script with the media containing the
volumes as they are needed. If the archive is on tape, you don't need
to rewind the tape to to its beginning---if the tape head is
positioned past the beginning of the archive, the script will rewind
-the tape as needed. @FIXME-xref{Media, for a discussion of tape
-positioning.}
+the tape as needed. @xref{Tape Positioning}, for a discussion of tape
+positioning.
@quotation
@strong{Warning:} The script will delete files from the active file
system if they were not in the file system when the archive was made.
@end quotation
-@value{xref-incremental}, for an explanation of how the script makes
+@xref{Incremental Dumps}, for an explanation of how the script makes
that determination.
@node Choosing
@chapter Choosing Files and Names for @command{tar}
-@UNREVISED
-
-@FIXME{Melissa (still) Doesn't Really Like This ``Intro'' Paragraph!!!}
Certain options to @command{tar} enable you to specify a name for your
archive. Other options let you decide which files to include or exclude
the file names do or don't match specified patterns, or whether files
are in specified directories.
+This chapter discusses these options in detail.
+
@menu
* file:: Choosing the Archive's Name
* Selecting Archive Members::
* files:: Reading Names from a File
* exclude:: Excluding Some Files
-* Wildcards::
+* wildcards:: Wildcards Patterns and Matching
+* quoting styles:: Ways of Quoting Special Characters in Names
+* transform:: Modifying File and Member Names
* after:: Operating Only on New Files
* recurse:: Descending into Directories
* one:: Crossing File System Boundaries
@node file
@section Choosing and Naming Archive Files
+
@cindex Naming an archive
@cindex Archive Name
-@cindex Directing output
@cindex Choosing an archive file
@cindex Where is the archive?
-@UNREVISED
-
-@FIXME{should the title of this section actually be, "naming an
-archive"?}
-
+@opindex file
By default, @command{tar} uses an archive file name that was compiled when
it was built on the system; usually this name refers to some physical
tape drive on the machine. However, the person who installed @command{tar}
-on the system may not set the default to a meaningful value as far as
+on the system may not have set the default to a meaningful value as far as
most users are concerned. As a result, you will usually want to tell
-@command{tar} where to find (or create) the archive. The @value{op-file}
+@command{tar} where to find (or create) the archive. The
+@option{--file=@var{archive-name}} (@option{-f @var{archive-name}})
option allows you to either specify or name a file to use as the archive
instead of the default archive file location.
@table @option
+@xopindex{file, short description}
@item --file=@var{archive-name}
@itemx -f @var{archive-name}
Name the archive to create or operate on. Use in conjunction with
If you do not name the archive, @command{tar} uses the value of the
environment variable @env{TAPE} as the file name for the archive. If
that is not available, @command{tar} uses a default, compiled-in archive
-name, usually that for tape unit zero (ie. @file{/dev/tu00}).
-@command{tar} always needs an archive name.
+name, usually that for tape unit zero (i.e., @file{/dev/tu00}).
+@cindex Standard input and output
+@cindex tar to standard input and output
If you use @file{-} as an @var{archive-name}, @command{tar} reads the
archive from standard input (when listing or extracting files), or
writes it to standard output (when creating an archive). If you use
@command{tar} reads the original archive from its standard input and
writes the entire new archive to its standard output.
-@FIXME{might want a different example here; this is already used in
-"notable tar usages".}
+The following example is a convenient way of copying directory
+hierarchy from @file{sourcedir} to @file{targetdir}.
@smallexample
-$ @kbd{cd sourcedir; tar -cf - . | (cd targetdir; tar -xf -)}
+$ @kbd{(cd sourcedir; tar -cf - .) | (cd targetdir; tar -xpf -)}
@end smallexample
-@FIXME{help!}
+The @option{-C} option allows to avoid using subshells:
-@cindex Standard input and output
-@cindex tar to standard input and output
+@smallexample
+$ @kbd{tar -C sourcedir -cf - . | tar -C targetdir -xpf -}
+@end smallexample
+
+In both examples above, the leftmost @command{tar} invocation archives
+the contents of @file{sourcedir} to the standard output, while the
+rightmost one reads this archive from its standard input and
+extracts it. The @option{-p} option tells it to restore permissions
+of the extracted files.
+
+@cindex Remote devices
+@cindex tar to a remote device
@anchor{remote-dev}
To specify an archive file on a device attached to a remote machine,
use the following:
@smallexample
-@kbd{--file=@var{hostname}:/@var{dev}/@var{file name}}
+@kbd{--file=@var{hostname}:/@var{dev}/@var{file-name}}
@end smallexample
@noindent
-@command{tar} will complete the remote connection, if possible, and
+@command{tar} will set up the remote connection, if possible, and
prompt you for a username and password. If you use
-@option{--file=@@@var{hostname}:/@var{dev}/@var{file name}}, @command{tar}
-will complete the remote connection, if possible, using your username
+@option{--file=@@@var{hostname}:/@var{dev}/@var{file-name}}, @command{tar}
+will attempt to set up the remote connection using your username
as the username on the remote machine.
+@cindex Local and remote archives
+@anchor{local and remote archives}
If the archive file name includes a colon (@samp{:}), then it is assumed
to be a file on another machine. If the archive file is
@samp{@var{user}@@@var{host}:@var{file}}, then @var{file} is used on the
(along with the @samp{@@} sign), then your user name will be used.
(This is the normal @command{rsh} behavior.) It is necessary for the
remote machine, in addition to permitting your @command{rsh} access, to
-have the @file{rmt} program installed (This command is included in
+have the @file{rmt} program installed (this command is included in
the @GNUTAR{} distribution and by default is installed under
-@file{@var{prefix}/libexec/rmt}, were @var{prefix} means your
+@file{@var{prefix}/libexec/rmt}, where @var{prefix} means your
installation prefix). If you need to use a file whose name includes a
colon, then the remote tape drive behavior
-can be inhibited by using the @value{op-force-local} option.
-
-@FIXME{i know we went over this yesterday, but bob (and now i do again,
-too) thinks it's out of the middle of nowhere. it doesn't seem to tie
-into what came before it well enough <<i moved it now, is it better
-here?>>. bob also comments that if Amanda isn't free software, we
-shouldn't mention it..}
+can be inhibited by using the @option{--force-local} option.
When the archive is being created to @file{/dev/null}, @GNUTAR{}
-tries to minimize input and output operations. The
-Amanda backup system, when used with @GNUTAR{}, has
-an initial sizing pass which uses this feature.
+tries to minimize input and output operations. The Amanda backup
+system, when used with @GNUTAR{}, has an initial sizing pass which
+uses this feature.
@node Selecting Archive Members
@section Selecting Archive Members
@kbd{tar} @var{operation} [@var{option1} @var{option2} @dots{}] [@var{file name-1} @var{file name-2} @dots{}]
@end smallexample
-If a file name begins with dash (@samp{-}), preceede it with
-@option{--add-file} option to preventit from being treated as an
+If a file name begins with dash (@samp{-}), precede it with
+@option{--add-file} option to prevent it from being treated as an
option.
+@anchor{input name quoting}
+By default @GNUTAR{} attempts to @dfn{unquote} each file or member
+name, replacing @dfn{escape sequences} according to the following
+table:
+
+@multitable @columnfractions 0.20 0.60
+@headitem Escape @tab Replaced with
+@item \a @tab Audible bell (@acronym{ASCII} 7)
+@item \b @tab Backspace (@acronym{ASCII} 8)
+@item \f @tab Form feed (@acronym{ASCII} 12)
+@item \n @tab New line (@acronym{ASCII} 10)
+@item \r @tab Carriage return (@acronym{ASCII} 13)
+@item \t @tab Horizontal tabulation (@acronym{ASCII} 9)
+@item \v @tab Vertical tabulation (@acronym{ASCII} 11)
+@item \? @tab @acronym{ASCII} 127
+@item \@var{n} @tab @acronym{ASCII} @var{n} (@var{n} should be an octal number
+ of up to 3 digits)
+@end multitable
+
+A backslash followed by any other symbol is retained.
+
+This default behavior is controlled by the following command line
+option:
+
+@table @option
+@opindex unquote
+@item --unquote
+Enable unquoting input file or member names (default).
+
+@opindex no-unquote
+@item --no-unquote
+Disable unquoting input file or member names.
+@end table
+
If you specify a directory name as a file name argument, all the files
in that directory are operated on by @command{tar}.
-If you do not specify files when @command{tar} is invoked with
-@value{op-create}, @command{tar} operates on all the non-directory files in
-the working directory. If you specify either @value{op-list} or
-@value{op-extract}, @command{tar} operates on all the archive members in the
-archive. If you specify any operation other than one of these three,
-@command{tar} does nothing.
+If you do not specify files, @command{tar} behavior differs depending
+on the operation mode as described below:
+
+When @command{tar} is invoked with @option{--create} (@option{-c}),
+@command{tar} will stop immediately, reporting the following:
+
+@smallexample
+@group
+$ @kbd{tar cf a.tar}
+tar: Cowardly refusing to create an empty archive
+Try `tar --help' or `tar --usage' for more information.
+@end group
+@end smallexample
+
+If you specify either @option{--list} (@option{-t}) or
+@option{--extract} (@option{--get}, @option{-x}), @command{tar}
+operates on all the archive members in the archive.
+
+If run with @option{--diff} option, tar will compare the archive with
+the contents of the current working directory.
+
+If you specify any other operation, @command{tar} does nothing.
By default, @command{tar} takes file names from the command line. However,
there are other ways to specify file or member names, or to modify the
manner in which @command{tar} selects the files or members upon which to
-operate. @FIXME{add xref here}In general, these methods work both for
-specifying the names of files and archive members.
+operate. In general, these methods work both for specifying the names
+of files and archive members.
@node files
@section Reading Names from a File
@cindex Reading file names from a file
@cindex Lists of file names
@cindex File Name arguments, alternatives
+@cindex @command{find}, using with @command{tar}
Instead of giving the names of files or archive members on the command
line, you can put the names into a file, and then use the
-@value{op-files-from} option to @command{tar}. Give the name of the file
-which contains the list of files to include as the argument to
+@option{--files-from=@var{file-of-names}} (@option{-T
+@var{file-of-names}}) option to @command{tar}. Give the name of the
+file which contains the list of files to include as the argument to
@option{--files-from}. In the list, the file names should be separated by
newlines. You will frequently use this option when you have generated
the list of files to archive with the @command{find} utility.
@table @option
-@item --files-from=@var{file name}
-@itemx -T @var{file name}
-Get names to extract or create from file @var{file name}.
+@opindex files-from
+@item --files-from=@var{file-name}
+@itemx -T @var{file-name}
+Get names to extract or create from file @var{file-name}.
@end table
If you give a single dash as a file name for @option{--files-from}, (i.e.,
Any number of @option{-T} options can be given in the command line.
-@FIXME{add bob's example, from his message on 2-10-97}
-
The following example shows how to use @command{find} to generate a list of
files smaller than 400K in length and put that list into a file
called @file{small-files}. You can then use the @option{-T} option to
more information.)
@smallexample
-$ @kbd{find . -size -400 -print > small-files}
+$ @kbd{find . -size -400 -print > small-files}
$ @kbd{tar -c -v -z -T small-files -f little.tgz}
@end smallexample
@noindent
In the file list given by @option{-T} option, any file name beginning
with @samp{-} character is considered a @command{tar} option and is
-processed accordingly.@footnote{Versions of @GNUTAR{} up to 1.15.1
+processed accordingly@footnote{Versions of @GNUTAR{} up to 1.15.1
recognized only @option{-C} option in file lists, and only if the
-option and its argument occupied two consecutive lines.} For example,
+option and its argument occupied two consecutive lines.}. For example,
the common use of this feature is to change to another directory by
specifying @option{-C} option:
@end smallexample
@noindent
+@xopindex{directory, using in @option{--files-from} argument}
Notice that the option parsing algorithm used with @option{-T} is
stricter than the one used by shell. Namely, when specifying option
arguments, you should observe the following rules:
@end smallexample
@end itemize
-@cindex @option{--add-file}
+@opindex add-file
If you happen to have a file whose name starts with @samp{-},
precede it with @option{--add-file} option to prevent it from
-being recognized as an option. For example: @code{--add-file --my-file}.
+being recognized as an option. For example: @code{--add-file=--my-file}.
@menu
* nul::
@end menu
@node nul
-@subsection @code{NUL} Terminated File Names
+@subsection @code{NUL}-Terminated File Names
@cindex File names, terminated by @code{NUL}
-@cindex @code{NUL} terminated file names
-The @value{op-null} option causes @value{op-files-from} to read file
-names terminated by a @code{NUL} instead of a newline, so files whose
-names contain newlines can be archived using @option{--files-from}.
+@cindex @code{NUL}-terminated file names
+The @option{--null} option causes
+@option{--files-from=@var{file-of-names}} (@option{-T @var{file-of-names}})
+to read file names terminated by a @code{NUL} instead of a newline, so
+files whose names contain newlines can be archived using
+@option{--files-from}.
@table @option
+@xopindex{null, described}
@item --null
-Only consider @code{NUL} terminated file names, instead of files that
+Only consider @code{NUL}-terminated file names, instead of files that
terminate in a newline.
+
+@xopindex{no-null, described}
+@item --no-null
+Undo the effect of any previous @option{--null} option.
@end table
-The @value{op-null} option is just like the one in @acronym{GNU}
+The @option{--null} option is just like the one in @acronym{GNU}
@command{xargs} and @command{cpio}, and is useful with the
@option{-print0} predicate of @acronym{GNU} @command{find}. In
-@command{tar}, @value{op-null} also disables special handling for
+@command{tar}, @option{--null} also disables special handling for
file names that begin with dash.
This example shows how to use @command{find} to generate a list of files
@file{long-files}. The @option{-print0} option to @command{find} is just
like @option{-print}, except that it separates files with a @code{NUL}
rather than with a newline. You can then run @command{tar} with both the
-@option{--null} and @option{-T} options to specify that @command{tar} get the
+@option{--null} and @option{-T} options to specify that @command{tar} gets the
files from that file, @file{long-files}, to create the archive
@file{big.tgz}. The @option{--null} option to @command{tar} will cause
@command{tar} to recognize the @code{NUL} separator between files.
@smallexample
-$ @kbd{find . -size +800 -print0 > long-files}
+$ @kbd{find . -size +800 -print0 > long-files}
$ @kbd{tar -c -v --null --files-from=long-files --file=big.tar}
@end smallexample
-@FIXME{say anything else here to conclude the section?}
+The @option{--no-null} option can be used if you need to read both
+@code{NUL}-terminated and newline-terminated files on the same command line.
+For example, if @file{flist} is a newline-terminated file, then the
+following command can be used to combine it with the above command:
+
+@smallexample
+@group
+$ @kbd{find . -size +800 -print0 |
+ tar -c -f big.tar --null -T - --no-null -T flist}
+@end group
+@end smallexample
+
+This example uses short options for typographic reasons, to avoid
+very long lines.
+
+@GNUTAR is able to automatically detect @code{NUL}-terminated file lists, so
+it is safe to use them even without the @option{--null} option. In
+this case @command{tar} will print a warning and continue reading such
+a file as if @option{--null} were actually given:
+
+@smallexample
+@group
+$ @kbd{find . -size +800 -print0 | tar -c -f big.tar -T -}
+tar: -: file name read contains nul character
+@end group
+@end smallexample
+
+The null terminator, however, remains in effect only for this
+particular file, any following @option{-T} options will assume
+newline termination. Of course, the null autodetection applies
+to these eventual surplus @option{-T} options as well.
@node exclude
@section Excluding Some Files
+
@cindex File names, excluding files by
@cindex Excluding files by name and pattern
@cindex Excluding files by file system
-@UNREVISED
-
+@opindex exclude
+@opindex exclude-from
To avoid operating on files whose names match a particular pattern,
-use the @value{op-exclude} or @value{op-exclude-from} options.
+use the @option{--exclude} or @option{--exclude-from} options.
@table @option
+@opindex exclude
@item --exclude=@var{pattern}
Causes @command{tar} to ignore files that match the @var{pattern}.
@end table
@findex exclude
-The @value{op-exclude} option prevents any file or member whose name
-matches the shell wildcard (@var{pattern}) from being operated on.
+The @option{--exclude=@var{pattern}} option prevents any file or
+member whose name matches the shell wildcard (@var{pattern}) from
+being operated on.
For example, to create an archive with all the contents of the directory
@file{src} except for files whose names end in @file{.o}, use the
command @samp{tar -cf src.tar --exclude='*.o' src}.
You may give multiple @option{--exclude} options.
@table @option
+@opindex exclude-from
@item --exclude-from=@var{file}
@itemx -X @var{file}
Causes @command{tar} to ignore files that match the patterns listed in
@end table
@findex exclude-from
-Use the @option{--exclude-from=@var{file-of-patterns}} option to read a
+Use the @option{--exclude-from} option to read a
list of patterns, one per line, from @var{file}; @command{tar} will
ignore files matching those patterns. Thus if @command{tar} is
called as @w{@samp{tar -c -X foo .}} and the file @file{foo} contains a
single line @file{*.o}, no files whose names end in @file{.o} will be
added to the archive.
-@FIXME{do the exclude options files need to have stuff separated by
-newlines the same as the files-from option does?}
+Notice, that lines from @var{file} are read verbatim. One of the
+frequent errors is leaving some extra whitespace after a file name,
+which is difficult to catch using text editors.
+
+However, empty lines are OK.
@table @option
-@item --exclude-caches
-Causes @command{tar} to ignore directories containing a cache directory tag.
+@cindex version control system, excluding files
+@cindex VCS, excluding files
+@cindex SCCS, excluding files
+@cindex RCS, excluding files
+@cindex CVS, excluding files
+@cindex SVN, excluding files
+@cindex git, excluding files
+@cindex Bazaar, excluding files
+@cindex Arch, excluding files
+@cindex Mercurial, excluding files
+@cindex Darcs, excluding files
+@opindex exclude-vcs
+@item --exclude-vcs
+Exclude files and directories used by following version control
+systems: @samp{CVS}, @samp{RCS}, @samp{SCCS}, @samp{SVN}, @samp{Arch},
+@samp{Bazaar}, @samp{Mercurial}, and @samp{Darcs}.
+
+As of version @value{VERSION}, the following files are excluded:
+
+@itemize @bullet
+@item @file{CVS/}, and everything under it
+@item @file{RCS/}, and everything under it
+@item @file{SCCS/}, and everything under it
+@item @file{.git/}, and everything under it
+@item @file{.gitignore}
+@item @file{.cvsignore}
+@item @file{.svn/}, and everything under it
+@item @file{.arch-ids/}, and everything under it
+@item @file{@{arch@}/}, and everything under it
+@item @file{=RELEASE-ID}
+@item @file{=meta-update}
+@item @file{=update}
+@item @file{.bzr}
+@item @file{.bzrignore}
+@item @file{.bzrtags}
+@item @file{.hg}
+@item @file{.hgignore}
+@item @file{.hgrags}
+@item @file{_darcs}
+@end itemize
+
+@opindex exclude-backups
+@item --exclude-backups
+Exclude backup and lock files. This option causes exclusion of files
+that match the following shell globbing patterns:
+
+@table @asis
+@item .#*
+@item *~
+@item #*#
+@end table
+
@end table
@findex exclude-caches
-When creating an archive,
-the @option{--exclude-caches} option
-causes @command{tar} to exclude all directories
-that contain a @dfn{cache directory tag}.
-A cache directory tag is a short file
-with the well-known name @file{CACHEDIR.TAG}
-and having a standard header
+When creating an archive, the @option{--exclude-caches} option family
+causes @command{tar} to exclude all directories that contain a @dfn{cache
+directory tag}. A cache directory tag is a short file with the
+well-known name @file{CACHEDIR.TAG} and having a standard header
specified in @url{http://www.brynosaurus.com/cachedir/spec.html}.
-Various applications write cache directory tags
-into directories they use to hold regenerable, non-precious data,
-so that such data can be more easily excluded from backups.
+Various applications write cache directory tags into directories they
+use to hold regenerable, non-precious data, so that such data can be
+more easily excluded from backups.
-@menu
-* controlling pattern-patching with exclude::
-* problems with exclude::
-@end menu
+There are three @samp{exclude-caches} options, each providing a different
+exclusion semantics:
-@node controlling pattern-patching with exclude
-@unnumberedsubsec Controlling Pattern-Matching with the @code{exclude} Options
+@table @option
+@opindex exclude-caches
+@item --exclude-caches
+Do not archive the contents of the directory, but archive the
+directory itself and the @file{CACHEDIR.TAG} file.
-Normally, a pattern matches a name if an initial subsequence of the
-name's components matches the pattern, where @samp{*}, @samp{?}, and
-@samp{[...]} are the usual shell wildcards, @samp{\} escapes wildcards,
-and wildcards can match @samp{/}.
+@opindex exclude-caches-under
+@item --exclude-caches-under
+Do not archive the contents of the directory, nor the
+@file{CACHEDIR.TAG} file, archive only the directory itself.
-Other than optionally stripping leading @samp{/} from names
-(@pxref{absolute}), patterns and names are used as-is. For
-example, trailing @samp{/} is not trimmed from a user-specified name
-before deciding whether to exclude it.
+@opindex exclude-caches-all
+@item --exclude-caches-all
+Omit directories containing @file{CACHEDIR.TAG} file entirely.
+@end table
-However, this matching procedure can be altered by the options listed
-below. These options accumulate. For example:
+@findex exclude-tag
+Another option family, @option{--exclude-tag}, provides a generalization of
+this concept. It takes a single argument, a file name to look for.
+Any directory that contains this file will be excluded from the dump.
+Similarly to @samp{exclude-caches}, there are three options in this
+option family:
+
+@table @option
+@opindex exclude-tag
+@item --exclude-tag=@var{file}
+Do not dump the contents of the directory, but dump the
+directory itself and the @var{file}.
+
+@opindex exclude-tag-under
+@item --exclude-tag-under=@var{file}
+Do not dump the contents of the directory, nor the
+@var{file}, archive only the directory itself.
+
+@opindex exclude-tag-all
+@item --exclude-tag-all=@var{file}
+Omit directories containing @var{file} file entirely.
+@end table
+
+Multiple @option{--exclude-tag*} options can be given.
+
+For example, given this directory:
@smallexample
---ignore-case --exclude='makefile' --no-ignore-case ---exclude='readme'
+@group
+$ @kbd{find dir}
+dir
+dir/blues
+dir/jazz
+dir/folk
+dir/folk/tagfile
+dir/folk/sanjuan
+dir/folk/trote
+@end group
@end smallexample
-ignores case when excluding @samp{makefile}, but not when excluding
-@samp{readme}.
+The @option{--exclude-tag} will produce the following:
-@table @option
-@item --anchored
-@itemx --no-anchored
-If anchored, a pattern must match an initial subsequence
-of the name's components. Otherwise, the pattern can match any
-subsequence. Default is @option{--no-anchored}.
+@smallexample
+$ @kbd{tar -cf archive.tar --exclude-tag=tagfile -v dir}
+dir/
+dir/blues
+dir/jazz
+dir/folk/
+tar: dir/folk/: contains a cache directory tag tagfile;
+ contents not dumped
+dir/folk/tagfile
+@end smallexample
-@item --ignore-case
-@itemx --no-ignore-case
-When ignoring case, upper-case patterns match lower-case names and vice versa.
-When not ignoring case (the default), matching is case-sensitive.
+Both the @file{dir/folk} directory and its tagfile are preserved in
+the archive, however the rest of files in this directory are not.
-@item --wildcards
-@itemx --no-wildcards
-When using wildcards (the default), @samp{*}, @samp{?}, and @samp{[...]}
-are the usual shell wildcards, and @samp{\} escapes wildcards.
-Otherwise, none of these characters are special, and patterns must match
-names literally.
+Now, using the @option{--exclude-tag-under} option will exclude
+@file{tagfile} from the dump, while still preserving the directory
+itself, as shown in this example:
-@item --wildcards-match-slash
-@itemx --no-wildcards-match-slash
-When wildcards match slash (the default), a wildcard like @samp{*} in
-the pattern can match a @samp{/} in the name. Otherwise, @samp{/} is
-matched only by @samp{/}.
+@smallexample
+$ @kbd{tar -cf archive.tar --exclude-tag-under=tagfile -v dir}
+dir/
+dir/blues
+dir/jazz
+dir/folk/
+./tar: dir/folk/: contains a cache directory tag tagfile;
+ contents not dumped
+@end smallexample
-@end table
+Finally, using @option{--exclude-tag-all} omits the @file{dir/folk}
+directory entirely:
-The @option{--recursion} and @option{--no-recursion} options
-(@pxref{recurse}) also affect how exclude patterns are interpreted. If
-recursion is in effect, a pattern excludes a name if it matches any of
-the name's parent directories.
+@smallexample
+$ @kbd{tar -cf archive.tar --exclude-tag-all=tagfile -v dir}
+dir/
+dir/blues
+dir/jazz
+./tar: dir/folk/: contains a cache directory tag tagfile;
+ directory not dumped
+@end smallexample
+
+@menu
+* problems with exclude::
+@end menu
@node problems with exclude
@unnumberedsubsec Problems with Using the @code{exclude} Options
+@xopindex{exclude, potential problems with}
Some users find @samp{exclude} options confusing. Here are some common
pitfalls:
@itemize @bullet
@item
-The main operating mode of @command{tar} does not act on a path name
-explicitly listed on the command line if one of its file name
+The main operating mode of @command{tar} does not act on a file name
+explicitly listed on the command line, if one of its file name
components is excluded. In the example above, if
you create an archive and exclude files that end with @samp{*.o}, but
explicitly name the file @samp{dir.o/foo} after all the options have been
listed, @samp{dir.o/foo} will be excluded from the archive.
@item
-You can sometimes confuse the meanings of @value{op-exclude} and
-@value{op-exclude-from}. Be careful: use @value{op-exclude} when files
+You can sometimes confuse the meanings of @option{--exclude} and
+@option{--exclude-from}. Be careful: use @option{--exclude} when files
to be excluded are given as a pattern on the command line. Use
-@option{--exclude-from=@var{file-of-patterns}} to introduce the name of a
-file which contains a list of patterns, one per line; each of these
-patterns can exclude zero, one, or many files.
+@option{--exclude-from} to introduce the name of a file which contains
+a list of patterns, one per line; each of these patterns can exclude
+zero, one, or many files.
@item
-When you use @value{op-exclude}, be sure to quote the @var{pattern}
-parameter, so @GNUTAR{} sees wildcard characters
+When you use @option{--exclude=@var{pattern}}, be sure to quote the
+@var{pattern} parameter, so @GNUTAR{} sees wildcard characters
like @samp{*}. If you do not do this, the shell might expand the
@samp{*} itself using files at hand, so @command{tar} might receive a
list of files instead of one pattern, or none at all, making the
rather than:
@smallexample
+# @emph{Wrong!}
$ @kbd{tar -c -f @var{archive.tar} --exclude *.o @var{directory}}
@end smallexample
might fail.
@item
+@FIXME{The change in semantics must have occurred before 1.11,
+so I doubt if it is worth mentioning at all. Anyway, should at
+least specify in which version the semantics changed.}
In earlier versions of @command{tar}, what is now the
-@option{--exclude-from=@var{file-of-patterns}} option was called
-@option{--exclude=@var{pattern}} instead. Now,
-@option{--exclude=@var{pattern}} applies to patterns listed on the command
-line and @option{--exclude-from=@var{file-of-patterns}} applies to
-patterns listed in a file.
+@option{--exclude-from} option was called @option{--exclude} instead.
+Now, @option{--exclude} applies to patterns listed on the command
+line and @option{--exclude-from} applies to patterns listed in a
+file.
@end itemize
-@node Wildcards
+@node wildcards
@section Wildcards Patterns and Matching
@dfn{Globbing} is the operation by which @dfn{wildcard} characters,
@samp{*} or @samp{?} for example, are replaced and expanded into all
-existing files matching the given pattern. However, @command{tar} often
-uses wildcard patterns for matching (or globbing) archive members instead
-of actual files in the file system. Wildcard patterns are also used for
+existing files matching the given pattern. @GNUTAR{} can use wildcard
+patterns for matching (or globbing) archive members when extracting
+from or listing an archive. Wildcard patterns are also used for
verifying volume labels of @command{tar} archives. This section has the
purpose of explaining wildcard syntax for @command{tar}.
Periods (@samp{.}) or forward slashes (@samp{/}) are not considered
special for wildcard matches. However, if a pattern completely matches
a directory prefix of a matched string, then it matches the full matched
-string: excluding a directory also excludes all the files beneath it.
+string: thus, excluding a directory also excludes all the files beneath it.
-@node after
-@section Operating Only on New Files
-@cindex Excluding file by age
-@cindex Data Modification time, excluding files by
-@cindex Modification time, excluding files by
-@cindex Age, excluding files by
-@UNREVISED
+@menu
+* controlling pattern-matching::
+@end menu
-The @value{op-after-date} option causes @command{tar} to only work on files
-whose data modification or status change times are newer than the @var{date}
-given. If @var{date} starts with @samp{/} or @samp{.}, it is taken to
-be a file name; the data modification time of that file is used as the date.
-If you use this option when creating or appending to an archive,
-the archive will only include new files. If you use @option{--after-date}
-when extracting an archive, @command{tar} will only extract files newer
-than the @var{date} you specify.
+@node controlling pattern-matching
+@unnumberedsubsec Controlling Pattern-Matching
-If you only want @command{tar} to make the date comparison based on
-modification of the file's data (rather than status
-changes), then use the @value{op-newer-mtime} option.
+For the purposes of this section, we call @dfn{exclusion members} all
+member names obtained while processing @option{--exclude} and
+@option{--exclude-from} options, and @dfn{inclusion members} those
+member names that were given in the command line or read from the file
+specified with @option{--files-from} option.
-You may use these options with any operation. Note that these options
-differ from the @value{op-update} operation in that they allow you to
-specify a particular date against which @command{tar} can compare when
-deciding whether or not to archive the files.
+These two pairs of member lists are used in the following operations:
+@option{--diff}, @option{--extract}, @option{--list},
+@option{--update}.
-@table @option
-@item --after-date=@var{date}
-@itemx --newer=@var{date}
-@itemx -N @var{date}
-Only store files newer than @var{date}.
+There are no inclusion members in create mode (@option{--create} and
+@option{--append}), since in this mode the names obtained from the
+command line refer to @emph{files}, not archive members.
-Acts on files only if their data modification or status change times are
-later than @var{date}. Use in conjunction with any operation.
+By default, inclusion members are compared with archive members
+literally @footnote{Notice that earlier @GNUTAR{} versions used
+globbing for inclusion members, which contradicted to UNIX98
+specification and was not documented. @xref{Changes}, for more
+information on this and other changes.} and exclusion members are
+treated as globbing patterns. For example:
-If @var{date} starts with @samp{/} or @samp{.}, it is taken to be a file
-name; the data modification time of that file is used as the date.
+@smallexample
+@group
+$ @kbd{tar tf foo.tar}
+a.c
+b.c
+a.txt
+[remarks]
+# @i{Member names are used verbatim:}
+$ @kbd{tar -xf foo.tar -v '[remarks]'}
+[remarks]
+# @i{Exclude member names are globbed:}
+$ @kbd{tar -xf foo.tar -v --exclude '*.c'}
+a.txt
+[remarks]
+@end group
+@end smallexample
-@item --newer-mtime=@var{date}
-Acts like @value{op-after-date}, but only looks at data modification times.
+This behavior can be altered by using the following options:
+
+@table @option
+@opindex wildcards
+@item --wildcards
+Treat all member names as wildcards.
+
+@opindex no-wildcards
+@item --no-wildcards
+Treat all member names as literal strings.
@end table
-These options limit @command{tar} to operate only on files which have
-been modified after the date specified. A file's status is considered to have
-changed if its contents have been modified, or if its owner,
-permissions, and so forth, have been changed. (For more information on
-how to specify a date, see @ref{Date input formats}; remember that the
-entire date argument must be quoted if it contains any spaces.)
+Thus, to extract files whose names end in @samp{.c}, you can use:
-Gurus would say that @value{op-after-date} tests both the data
-modification time (@code{mtime}, the time the contents of the file
-were last modified) and the status change time (@code{ctime}, the time
-the file's status was last changed: owner, permissions, etc.@:)
-fields, while @value{op-newer-mtime} tests only the @code{mtime}
-field.
-
-To be precise, @value{op-after-date} checks @emph{both} @code{mtime} and
-@code{ctime} and processes the file if either one is more recent than
-@var{date}, while @value{op-newer-mtime} only checks @code{mtime} and
-disregards @code{ctime}. Neither uses @code{atime} (the last time the
-contents of the file were looked at).
+@smallexample
+$ @kbd{tar -xf foo.tar -v --wildcards '*.c'}
+a.c
+b.c
+@end smallexample
-Date specifiers can have embedded spaces. Because of this, you may need
-to quote date arguments to keep the shell from parsing them as separate
-arguments.
+@noindent
+Notice quoting of the pattern to prevent the shell from interpreting
+it.
-@FIXME{Need example of --newer-mtime with quoted argument.}
+The effect of @option{--wildcards} option is canceled by
+@option{--no-wildcards}. This can be used to pass part of
+the command line arguments verbatim and other part as globbing
+patterns. For example, the following invocation:
-@quotation
-@strong{Please Note:} @value{op-after-date} and @value{op-newer-mtime}
-should not be used for incremental backups. Some files (such as those
-in renamed directories) are not selected properly by these options.
-@xref{Incremental Dumps}.
-@end quotation
+@smallexample
+$ @kbd{tar -xf foo.tar --wildcards '*.txt' --no-wildcards '[remarks]'}
+@end smallexample
@noindent
-@FIXME{which tells -- need to fill this in!}
+instructs @command{tar} to extract from @file{foo.tar} all files whose
+names end in @samp{.txt} and the file named @file{[remarks]}.
-@node recurse
-@section Descending into Directories
-@cindex Avoiding recursion in directories
-@cindex Descending directories, avoiding
-@cindex Directories, avoiding recursion
-@cindex Recursion in directories, avoiding
-@UNREVISED
+Normally, a pattern matches a name if an initial subsequence of the
+name's components matches the pattern, where @samp{*}, @samp{?}, and
+@samp{[...]} are the usual shell wildcards, @samp{\} escapes wildcards,
+and wildcards can match @samp{/}.
-@FIXME{arrggh! this is still somewhat confusing to me. :-< }
+Other than optionally stripping leading @samp{/} from names
+(@pxref{absolute}), patterns and names are used as-is. For
+example, trailing @samp{/} is not trimmed from a user-specified name
+before deciding whether to exclude it.
-@FIXME{show dan bob's comments, from 2-10-97}
+However, this matching procedure can be altered by the options listed
+below. These options accumulate. For example:
-Usually, @command{tar} will recursively explore all directories (either
-those given on the command line or through the @value{op-files-from}
-option) for the various files they contain. However, you may not always
-want @command{tar} to act this way.
+@smallexample
+--ignore-case --exclude='makefile' --no-ignore-case ---exclude='readme'
+@end smallexample
-The @value{op-no-recursion} option inhibits @command{tar}'s recursive descent
-into specified directories. If you specify @option{--no-recursion}, you can
-use the @command{find} utility for hunting through levels of directories to
-construct a list of file names which you could then pass to @command{tar}.
-@command{find} allows you to be more selective when choosing which files to
-archive; see @ref{files} for more information on using @command{find} with
-@command{tar}, or look.
+@noindent
+ignores case when excluding @samp{makefile}, but not when excluding
+@samp{readme}.
@table @option
-@item --no-recursion
-Prevents @command{tar} from recursively descending directories.
+@opindex anchored
+@opindex no-anchored
+@item --anchored
+@itemx --no-anchored
+If anchored, a pattern must match an initial subsequence
+of the name's components. Otherwise, the pattern can match any
+subsequence. Default is @option{--no-anchored} for exclusion members
+and @option{--anchored} inclusion members.
-@item --recursion
-Requires @command{tar} to recursively descend directories.
-This is the default.
-@end table
+@opindex ignore-case
+@opindex no-ignore-case
+@item --ignore-case
+@itemx --no-ignore-case
+When ignoring case, upper-case patterns match lower-case names and vice versa.
+When not ignoring case (the default), matching is case-sensitive.
-When you use @option{--no-recursion}, @GNUTAR{} grabs
-directory entries themselves, but does not descend on them
-recursively. Many people use @command{find} for locating files they
-want to back up, and since @command{tar} @emph{usually} recursively
-descends on directories, they have to use the @samp{@w{! -d}} option
-to @command{find} @FIXME{needs more explanation or a cite to another
-info file}as they usually do not want all the files in a directory.
-They then use the @value{op-files-from} option to archive the files
-located via @command{find}.
+@opindex wildcards-match-slash
+@opindex no-wildcards-match-slash
+@item --wildcards-match-slash
+@itemx --no-wildcards-match-slash
+When wildcards match slash (the default for exclusion members), a
+wildcard like @samp{*} in the pattern can match a @samp{/} in the
+name. Otherwise, @samp{/} is matched only by @samp{/}.
-The problem when restoring files archived in this manner is that the
-directories themselves are not in the archive; so the
-@value{op-same-permissions} option does not affect them---while users
-might really like it to. Specifying @value{op-no-recursion} is a way to
-tell @command{tar} to grab only the directory entries given to it, adding
-no new files on its own.
+@end table
-The @value{op-no-recursion} option also applies when extracting: it
-causes @command{tar} to extract only the matched directory entries, not
-the files under those directories.
+The @option{--recursion} and @option{--no-recursion} options
+(@pxref{recurse}) also affect how member patterns are interpreted. If
+recursion is in effect, a pattern matches a name if it matches any of
+the name's parent directories.
-The @value{op-no-recursion} option also affects how exclude patterns
-are interpreted (@pxref{controlling pattern-patching with exclude}).
+The following table summarizes pattern-matching default values:
-The @option{--no-recursion} and @option{--recursion} options apply to
-later options and operands, and can be overridden by later occurrences
-of @option{--no-recursion} and @option{--recursion}. For example:
+@multitable @columnfractions .3 .7
+@headitem Members @tab Default settings
+@item Inclusion @tab @option{--no-wildcards --anchored --no-wildcards-match-slash}
+@item Exclusion @tab @option{--wildcards --no-anchored --wildcards-match-slash}
+@end multitable
-@smallexample
-$ @kbd{tar -cf jams.tar --norecursion grape --recursion grape/concord}
-@end smallexample
+@node quoting styles
+@section Quoting Member Names
-@noindent
-creates an archive with one entry for @file{grape}, and the recursive
-contents of @file{grape/concord}, but no entries under @file{grape}
-other than @file{grape/concord}.
+When displaying member names, @command{tar} takes care to avoid
+ambiguities caused by certain characters. This is called @dfn{name
+quoting}. The characters in question are:
-@node one
-@section Crossing File System Boundaries
-@cindex File system boundaries, not crossing
-@UNREVISED
+@itemize @bullet
+@item Non-printable control characters:
+@anchor{escape sequences}
+@multitable @columnfractions 0.20 0.10 0.60
+@headitem Character @tab @acronym{ASCII} @tab Character name
+@item \a @tab 7 @tab Audible bell
+@item \b @tab 8 @tab Backspace
+@item \f @tab 12 @tab Form feed
+@item \n @tab 10 @tab New line
+@item \r @tab 13 @tab Carriage return
+@item \t @tab 9 @tab Horizontal tabulation
+@item \v @tab 11 @tab Vertical tabulation
+@end multitable
-@command{tar} will normally automatically cross file system boundaries in
-order to archive files which are part of a directory tree. You can
-change this behavior by running @command{tar} and specifying
-@value{op-one-file-system}. This option only affects files that are
-archived because they are in a directory that is being archived;
-@command{tar} will still archive files explicitly named on the command line
-or through @value{op-files-from}, regardless of where they reside.
+@item Space (@acronym{ASCII} 32)
-@table @option
-@item --one-file-system
-@itemx -l
-Prevents @command{tar} from crossing file system boundaries when
-archiving. Use in conjunction with any write operation.
-@end table
+@item Single and double quotes (@samp{'} and @samp{"})
-The @option{--one-file-system} option causes @command{tar} to modify its
-normal behavior in archiving the contents of directories. If a file in
-a directory is not on the same file system as the directory itself, then
-@command{tar} will not archive that file. If the file is a directory
-itself, @command{tar} will not archive anything beneath it; in other words,
-@command{tar} will not cross mount points.
+@item Backslash (@samp{\})
+@end itemize
-It is reported that using this option, the mount point is is archived,
-but nothing under it.
+The exact way @command{tar} uses to quote these characters depends on
+the @dfn{quoting style}. The default quoting style, called
+@dfn{escape} (see below), uses backslash notation to represent control
+characters, space and backslash. Using this quoting style, control
+characters are represented as listed in column @samp{Character} in the
+above table, a space is printed as @samp{\ } and a backslash as @samp{\\}.
-This option is useful for making full or incremental archival backups of
-a file system. If this option is used in conjunction with
-@value{op-verbose}, files that are excluded are mentioned by name on the
-standard error.
+@GNUTAR{} offers seven distinct quoting styles, which can be selected
+using @option{--quoting-style} option:
-@menu
-* directory:: Changing Directory
-* absolute:: Absolute File Names
-@end menu
+@table @option
+@item --quoting-style=@var{style}
+@opindex quoting-style
-@node directory
-@subsection Changing the Working Directory
+Sets quoting style. Valid values for @var{style} argument are:
+literal, shell, shell-always, c, escape, locale, clocale.
+@end table
-@FIXME{need to read over this node now for continuity; i've switched
-things around some.}
+These styles are described in detail below. To illustrate their
+effect, we will use an imaginary tar archive @file{arch.tar}
+containing the following members:
-@cindex Changing directory mid-stream
-@cindex Directory, changing mid-stream
-@cindex Working directory, specifying
-@UNREVISED
+@smallexample
+@group
+# 1. Contains horizontal tabulation character.
+a tab
+# 2. Contains newline character
+a
+newline
+# 3. Contains a space
+a space
+# 4. Contains double quotes
+a"double"quote
+# 5. Contains single quotes
+a'single'quote
+# 6. Contains a backslash character:
+a\backslash
+@end group
+@end smallexample
-To change the working directory in the middle of a list of file names,
-either on the command line or in a file specified using
-@value{op-files-from}, use @value{op-directory}. This will change the
-working directory to the directory @var{directory} after that point in
-the list.
+Here is how usual @command{ls} command would have listed them, if they
+had existed in the current working directory:
-@table @option
-@item --directory=@var{directory}
-@itemx -C @var{directory}
-Changes the working directory in the middle of a command line.
-@end table
+@smallexample
+@group
+$ @kbd{ls}
+a\ttab
+a\nnewline
+a\ space
+a"double"quote
+a'single'quote
+a\\backslash
+@end group
+@end smallexample
-For example,
+Quoting styles:
+
+@table @samp
+@item literal
+No quoting, display each character as is:
@smallexample
-$ @kbd{tar -c -f jams.tar grape prune -C food cherry}
+@group
+$ @kbd{tar tf arch.tar --quoting-style=literal}
+./
+./a space
+./a'single'quote
+./a"double"quote
+./a\backslash
+./a tab
+./a
+newline
+@end group
@end smallexample
-@noindent
-will place the files @file{grape} and @file{prune} from the current
-directory into the archive @file{jams.tar}, followed by the file
-@file{cherry} from the directory @file{food}. This option is especially
-useful when you have several widely separated files that you want to
-store in the same archive.
+@item shell
+Display characters the same way Bourne shell does:
+control characters, except @samp{\t} and @samp{\n}, are printed using
+backslash escapes, @samp{\t} and @samp{\n} are printed as is, and a
+single quote is printed as @samp{\'}. If a name contains any quoted
+characters, it is enclosed in single quotes. In particular, if a name
+contains single quotes, it is printed as several single-quoted strings:
-Note that the file @file{cherry} is recorded in the archive under the
-precise name @file{cherry}, @emph{not} @file{food/cherry}. Thus, the
-archive will contain three files that all appear to have come from the
-same directory; if the archive is extracted with plain @samp{tar
---extract}, all three files will be written in the current directory.
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=shell}
+./
+'./a space'
+'./a'\''single'\''quote'
+'./a"double"quote'
+'./a\backslash'
+'./a tab'
+'./a
+newline'
+@end group
+@end smallexample
-Contrast this with the command,
+@item shell-always
+Same as @samp{shell}, but the names are always enclosed in single
+quotes:
@smallexample
-$ @kbd{tar -c -f jams.tar grape prune -C food red/cherry}
+@group
+$ @kbd{tar tf arch.tar --quoting-style=shell-always}
+'./'
+'./a space'
+'./a'\''single'\''quote'
+'./a"double"quote'
+'./a\backslash'
+'./a tab'
+'./a
+newline'
+@end group
@end smallexample
-@noindent
-which records the third file in the archive under the name
-@file{red/cherry} so that, if the archive is extracted using
-@samp{tar --extract}, the third file will be written in a subdirectory
-named @file{orange-colored}.
-
-You can use the @option{--directory} option to make the archive
-independent of the original name of the directory holding the files.
-The following command places the files @file{/etc/passwd},
-@file{/etc/hosts}, and @file{/lib/libc.a} into the archive
-@file{foo.tar}:
+@item c
+Use the notation of the C programming language. All names are
+enclosed in double quotes. Control characters are quoted using
+backslash notations, double quotes are represented as @samp{\"},
+backslash characters are represented as @samp{\\}. Single quotes and
+spaces are not quoted:
@smallexample
-$ @kbd{tar -c -f foo.tar -C /etc passwd hosts -C /lib libc.a}
+@group
+$ @kbd{tar tf arch.tar --quoting-style=c}
+"./"
+"./a space"
+"./a'single'quote"
+"./a\"double\"quote"
+"./a\\backslash"
+"./a\ttab"
+"./a\nnewline"
+@end group
@end smallexample
-@noindent
-However, the names of the archive members will be exactly what they were
-on the command line: @file{passwd}, @file{hosts}, and @file{libc.a}.
-They will not appear to be related by file name to the original
-directories where those files were located.
+@item escape
+Control characters are printed using backslash notation, a space is
+printed as @samp{\ } and a backslash as @samp{\\}. This is the
+default quoting style, unless it was changed when configured the
+package.
-Note that @option{--directory} options are interpreted consecutively. If
-@option{--directory} specifies a relative file name, it is interpreted
-relative to the then current directory, which might not be the same as
-the original current working directory of @command{tar}, due to a previous
-@option{--directory} option.
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=escape}
+./
+./a space
+./a'single'quote
+./a"double"quote
+./a\\backslash
+./a\ttab
+./a\nnewline
+@end group
+@end smallexample
-When using @option{--files-from} (@pxref{files}), you can put various
-@command{tar} options (including @option{-C}) in the file list. Notice,
-however, that in this case the option and its argument may not be
-separated by whitespace. If you use short option, its argument must
-either follow the option letter immediately, without any intervening
-whitespace, or occupy the next line. Otherwise, if you use long
-option, separate its argument by an equal sign.
+@item locale
+Control characters, single quote and backslash are printed using
+backslash notation. All names are quoted using left and right
+quotation marks, appropriate to the current locale. If it does not
+define quotation marks, use @samp{`} as left and @samp{'} as right
+quotation marks. Any occurrences of the right quotation mark in a
+name are escaped with @samp{\}, for example:
-For instance, the file list for the above example will be:
+For example:
@smallexample
@group
--C
-/etc
-passwd
-hosts
--C
-/lib
-libc.a
+$ @kbd{tar tf arch.tar --quoting-style=locale}
+`./'
+`./a space'
+`./a\'single\'quote'
+`./a"double"quote'
+`./a\\backslash'
+`./a\ttab'
+`./a\nnewline'
@end group
@end smallexample
-@noindent
-To use it, you would invoke @command{tar} as follows:
+@item clocale
+Same as @samp{locale}, but @samp{"} is used for both left and right
+quotation marks, if not provided by the currently selected locale:
@smallexample
-$ @kbd{tar -c -f foo.tar --files-from list}
+@group
+$ @kbd{tar tf arch.tar --quoting-style=clocale}
+"./"
+"./a space"
+"./a'single'quote"
+"./a\"double\"quote"
+"./a\\backslash"
+"./a\ttab"
+"./a\nnewline"
+@end group
@end smallexample
+@end table
-Notice also that you can only use the short option variant in the file
-list, i.e., always use @option{-C}, not @option{--directory}.
-
-The interpretation of @value{op-directory} is disabled by
-@value{op-null} option.
-
-@node absolute
-@subsection Absolute File Names
-@UNREVISED
+You can specify which characters should be quoted in addition to those
+implied by the current quoting style:
@table @option
-@item -P
-@itemx --absolute-names
-Do not strip leading slashes from file names, and permit file names
-containing a @file{..} file name component.
+@item --quote-chars=@var{string}
+Always quote characters from @var{string}, even if the selected
+quoting style would not quote them.
@end table
-By default, @GNUTAR{} drops a leading @samp{/} on
-input or output, and complains about file names containing a @file{..}
-component. This option turns off this behavior.
+For example, using @samp{escape} quoting (compare with the usual
+escape listing above):
-When @command{tar} extracts archive members from an archive, it strips any
-leading slashes (@samp{/}) from the member name. This causes absolute
-member names in the archive to be treated as relative file names. This
-allows you to have such members extracted wherever you want, instead of
-being restricted to extracting the member in the exact directory named
-in the archive. For example, if the archive member has the name
-@file{/etc/passwd}, @command{tar} will extract it as if the name were
-really @file{etc/passwd}.
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=escape --quote-chars=' "'}
+./
+./a\ space
+./a'single'quote
+./a\"double\"quote
+./a\\backslash
+./a\ttab
+./a\nnewline
+@end group
+@end smallexample
-File names containing @file{..} can cause problems when extracting, so
-@command{tar} normally warns you about such files when creating an
-archive, and rejects attempts to extracts such files.
+To disable quoting of such additional characters, use the following
+option:
-Other @command{tar} programs do not do this. As a result, if you
-create an archive whose member names start with a slash, they will be
-difficult for other people with a non-@GNUTAR{}
-program to use. Therefore, @GNUTAR{} also strips
-leading slashes from member names when putting members into the
-archive. For example, if you ask @command{tar} to add the file
-@file{/bin/ls} to an archive, it will do so, but the member name will
-be @file{bin/ls}.@footnote{A side effect of this is that when
-@option{--create} is used with @option{--verbose} the resulting output
-is not, generally speaking, the same as the one you'd get running
-@kbd{tar --list} command. This may be important if you use some
-scripts for comparing both outputs. @xref{listing member and file names},
-for the information on how to handle this case.}
+@table @option
+@item --no-quote-chars=@var{string}
+Remove characters listed in @var{string} from the list of quoted
+characters set by the previous @option{--quote-chars} option.
+@end table
-If you use the @value{op-absolute-names} option, @command{tar} will do
-none of these transformations.
+This option is particularly useful if you have added
+@option{--quote-chars} to your @env{TAR_OPTIONS} (@pxref{TAR_OPTIONS})
+and wish to disable it for the current invocation.
+
+Note, that @option{--no-quote-chars} does @emph{not} disable those
+characters that are quoted by default in the selected quoting style.
+
+@node transform
+@section Modifying File and Member Names
+
+@command{Tar} archives contain detailed information about files stored
+in them and full file names are part of that information. When
+storing a file to an archive, its file name is recorded in it,
+along with the actual file contents. When restoring from an archive,
+a file is created on disk with exactly the same name as that stored
+in the archive. In the majority of cases this is the desired behavior
+of a file archiver. However, there are some cases when it is not.
+
+First of all, it is often unsafe to extract archive members with
+absolute file names or those that begin with a @file{../}. @GNUTAR{}
+takes special precautions when extracting such names and provides a
+special option for handling them, which is described in
+@ref{absolute}.
+
+Secondly, you may wish to extract file names without some leading
+directory components, or with otherwise modified names. In other
+cases it is desirable to store files under differing names in the
+archive.
-To archive or extract files relative to the root directory, specify
-the @value{op-absolute-names} option.
+@GNUTAR{} provides several options for these needs.
-Normally, @command{tar} acts on files relative to the working
-directory---ignoring superior directory names when archiving, and
-ignoring leading slashes when extracting.
+@table @option
+@opindex strip-components
+@item --strip-components=@var{number}
+Strip given @var{number} of leading components from file names before
+extraction.
+@end table
-When you specify @value{op-absolute-names}, @command{tar} stores file names
-including all superior directory names, and preserves leading slashes.
-If you only invoked @command{tar} from the root directory you would never
-need the @value{op-absolute-names} option, but using this option may be
-more convenient than switching to root.
+For example, suppose you have archived whole @file{/usr} hierarchy to
+a tar archive named @file{usr.tar}. Among other files, this archive
+contains @file{usr/include/stdlib.h}, which you wish to extract to
+the current working directory. To do so, you type:
-@FIXME{Should be an example in the tutorial/wizardry section using this
+@smallexample
+$ @kbd{tar -xf usr.tar --strip=2 usr/include/stdlib.h}
+@end smallexample
+
+The option @option{--strip=2} instructs @command{tar} to strip the
+two leading components (@file{usr/} and @file{include/}) off the file
+name.
+
+If you add the @option{--verbose} (@option{-v}) option to the invocation
+above, you will note that the verbose listing still contains the
+full file name, with the two removed components still in place. This
+can be inconvenient, so @command{tar} provides a special option for
+altering this behavior:
+
+@anchor{show-transformed-names}
+@table @option
+@opindex show-transformed-names
+@item --show-transformed-names
+Display file or member names with all requested transformations
+applied.
+@end table
+
+@noindent
+For example:
+
+@smallexample
+@group
+$ @kbd{tar -xf usr.tar -v --strip=2 usr/include/stdlib.h}
+usr/include/stdlib.h
+$ @kbd{tar -xf usr.tar -v --strip=2 --show-transformed usr/include/stdlib.h}
+stdlib.h
+@end group
+@end smallexample
+
+Notice that in both cases the file @file{stdlib.h} is extracted to the
+current working directory, @option{--show-transformed-names} affects
+only the way its name is displayed.
+
+This option is especially useful for verifying whether the invocation
+will have the desired effect. Thus, before running
+
+@smallexample
+$ @kbd{tar -x --strip=@var{n}}
+@end smallexample
+
+@noindent
+it is often advisable to run
+
+@smallexample
+$ @kbd{tar -t -v --show-transformed --strip=@var{n}}
+@end smallexample
+
+@noindent
+to make sure the command will produce the intended results.
+
+In case you need to apply more complex modifications to the file name,
+@GNUTAR{} provides a general-purpose transformation option:
+
+@table @option
+@opindex transform
+@opindex xform
+@item --transform=@var{expression}
+@itemx --xform=@var{expression}
+Modify file names using supplied @var{expression}.
+@end table
+
+@noindent
+The @var{expression} is a @command{sed}-like replace expression of the
+form:
+
+@smallexample
+s/@var{regexp}/@var{replace}/[@var{flags}]
+@end smallexample
+
+@noindent
+where @var{regexp} is a @dfn{regular expression}, @var{replace} is a
+replacement for each file name part that matches @var{regexp}. Both
+@var{regexp} and @var{replace} are described in detail in
+@ref{The "s" Command, The "s" Command, The `s' Command, sed, GNU sed}.
+
+Any delimiter can be used in lieu of @samp{/}, the only requirement being
+that it be used consistently throughout the expression. For example,
+the following two expressions are equivalent:
+
+@smallexample
+@group
+s/one/two/
+s,one,two,
+@end group
+@end smallexample
+
+Changing delimiters is often useful when the @var{regex} contains
+slashes. For example, it is more convenient to write @code{s,/,-,} than
+@code{s/\//-/}.
+
+As in @command{sed}, you can give several replace expressions,
+separated by a semicolon.
+
+Supported @var{flags} are:
+
+@table @samp
+@item g
+Apply the replacement to @emph{all} matches to the @var{regexp}, not
+just the first.
+
+@item i
+Use case-insensitive matching.
+
+@item x
+@var{regexp} is an @dfn{extended regular expression} (@pxref{Extended
+regexps, Extended regular expressions, Extended regular expressions,
+sed, GNU sed}).
+
+@item @var{number}
+Only replace the @var{number}th match of the @var{regexp}.
+
+Note: the @acronym{POSIX} standard does not specify what should happen
+when you mix the @samp{g} and @var{number} modifiers. @GNUTAR{}
+follows the GNU @command{sed} implementation in this regard, so
+the interaction is defined to be: ignore matches before the
+@var{number}th, and then match and replace all matches from the
+@var{number}th on.
+
+@end table
+
+In addition, several @dfn{transformation scope} flags are supported,
+that control to what files transformations apply. These are:
+
+@table @samp
+@item r
+Apply transformation to regular archive members.
+
+@item R
+Do not apply transformation to regular archive members.
+
+@item s
+Apply transformation to symbolic link targets.
+
+@item S
+Do not apply transformation to symbolic link targets.
+
+@item h
+Apply transformation to hard link targets.
+
+@item H
+Do not apply transformation to hard link targets.
+@end table
+
+Default is @samp{rsh}, which means to apply tranformations to both archive
+members and targets of symbolic and hard links.
+
+Default scope flags can also be changed using @samp{flags=} statement
+in the transform expression. The flags set this way remain in force
+until next @samp{flags=} statement or end of expression, whichever
+occurs first. For example:
+
+@smallexample
+ --transform 'flags=S;s|^|/usr/local/|'
+@end smallexample
+
+Here are several examples of @option{--transform} usage:
+
+@enumerate
+@item Extract @file{usr/} hierarchy into @file{usr/local/}:
+
+@smallexample
+$ @kbd{tar --transform='s,usr/,usr/local/,' -x -f arch.tar}
+@end smallexample
+
+@item Strip two leading directory components (equivalent to
+@option{--strip-components=2}):
+
+@smallexample
+$ @kbd{tar --transform='s,/*[^/]*/[^/]*/,,' -x -f arch.tar}
+@end smallexample
+
+@item Convert each file name to lower case:
+
+@smallexample
+$ @kbd{tar --transform 's/.*/\L&/' -x -f arch.tar}
+@end smallexample
+
+@item Prepend @file{/prefix/} to each file name:
+
+@smallexample
+$ @kbd{tar --transform 's,^,/prefix/,' -x -f arch.tar}
+@end smallexample
+
+@item Archive the @file{/lib} directory, prepending @samp{/usr/local}
+to each archive member:
+
+@smallexample
+$ @kbd{tar --transform 's,^,/usr/local/,S' -c -f arch.tar /lib}
+@end smallexample
+@end enumerate
+
+Notice the use of flags in the last example. The @file{/lib}
+directory often contains many symbolic links to files within it.
+It may look, for example, like this:
+
+@smallexample
+$ @kbd{ls -l}
+drwxr-xr-x root/root 0 2008-07-08 16:20 /lib/
+-rwxr-xr-x root/root 1250840 2008-05-25 07:44 /lib/libc-2.3.2.so
+lrwxrwxrwx root/root 0 2008-06-24 17:12 /lib/libc.so.6 -> libc-2.3.2.so
+...
+@end smallexample
+
+Using the expression @samp{s,^,/usr/local/,} would mean adding
+@samp{/usr/local} to both regular archive members and to link
+targets. In this case, @file{/lib/libc.so.6} would become:
+
+@smallexample
+ /usr/local/lib/libc.so.6 -> /usr/local/libc-2.3.2.so
+@end smallexample
+
+This is definitely not desired. To avoid this, the @samp{S} flag
+is used, which excludes symbolic link targets from filename
+transformations. The result is:
+
+@smallexample
+$ @kbd{tar --transform 's,^,/usr/local/,S', -c -v -f arch.tar \
+ --show-transformed /lib}
+drwxr-xr-x root/root 0 2008-07-08 16:20 /usr/local/lib/
+-rwxr-xr-x root/root 1250840 2008-05-25 07:44 /usr/local/lib/libc-2.3.2.so
+lrwxrwxrwx root/root 0 2008-06-24 17:12 /usr/local/lib/libc.so.6 \
+ -> libc-2.3.2.so
+@end smallexample
+
+Unlike @option{--strip-components}, @option{--transform} can be used
+in any @GNUTAR{} operation mode. For example, the following command
+adds files to the archive while replacing the leading @file{usr/}
+component with @file{var/}:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,^usr/,var/,' /}
+@end smallexample
+
+To test @option{--transform} effect we suggest using
+@option{--show-transformed-names} option:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,^usr/,var/,' \
+ --verbose --show-transformed-names /}
+@end smallexample
+
+If both @option{--strip-components} and @option{--transform} are used
+together, then @option{--transform} is applied first, and the required
+number of components is then stripped from its result.
+
+You can use as many @option{--transform} options in a single command
+line as you want. The specified expressions will then be applied in
+order of their appearance. For example, the following two invocations
+are equivalent:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,/usr/var,/var/' \
+ --transform='s,/usr/local,/usr/,'}
+$ @kbd{tar -cf arch.tar \
+ --transform='s,/usr/var,/var/;s,/usr/local,/usr/,'}
+@end smallexample
+
+@node after
+@section Operating Only on New Files
+
+@cindex Excluding file by age
+@cindex Data Modification time, excluding files by
+@cindex Modification time, excluding files by
+@cindex Age, excluding files by
+The @option{--after-date=@var{date}} (@option{--newer=@var{date}},
+@option{-N @var{date}}) option causes @command{tar} to only work on
+files whose data modification or status change times are newer than
+the @var{date} given. If @var{date} starts with @samp{/} or @samp{.},
+it is taken to be a file name; the data modification time of that file
+is used as the date. If you use this option when creating or appending
+to an archive, the archive will only include new files. If you use
+@option{--after-date} when extracting an archive, @command{tar} will
+only extract files newer than the @var{date} you specify.
+
+If you only want @command{tar} to make the date comparison based on
+modification of the file's data (rather than status
+changes), then use the @option{--newer-mtime=@var{date}} option.
+
+@cindex --after-date and --update compared
+@cindex --newer-mtime and --update compared
+You may use these options with any operation. Note that these options
+differ from the @option{--update} (@option{-u}) operation in that they
+allow you to specify a particular date against which @command{tar} can
+compare when deciding whether or not to archive the files.
+
+@table @option
+@opindex after-date
+@opindex newer
+@item --after-date=@var{date}
+@itemx --newer=@var{date}
+@itemx -N @var{date}
+Only store files newer than @var{date}.
+
+Acts on files only if their data modification or status change times are
+later than @var{date}. Use in conjunction with any operation.
+
+If @var{date} starts with @samp{/} or @samp{.}, it is taken to be a file
+name; the data modification time of that file is used as the date.
+
+@opindex newer-mtime
+@item --newer-mtime=@var{date}
+Acts like @option{--after-date}, but only looks at data modification times.
+@end table
+
+These options limit @command{tar} to operate only on files which have
+been modified after the date specified. A file's status is considered to have
+changed if its contents have been modified, or if its owner,
+permissions, and so forth, have been changed. (For more information on
+how to specify a date, see @ref{Date input formats}; remember that the
+entire date argument must be quoted if it contains any spaces.)
+
+Gurus would say that @option{--after-date} tests both the data
+modification time (@code{mtime}, the time the contents of the file
+were last modified) and the status change time (@code{ctime}, the time
+the file's status was last changed: owner, permissions, etc.@:)
+fields, while @option{--newer-mtime} tests only the @code{mtime}
+field.
+
+To be precise, @option{--after-date} checks @emph{both} @code{mtime} and
+@code{ctime} and processes the file if either one is more recent than
+@var{date}, while @option{--newer-mtime} only checks @code{mtime} and
+disregards @code{ctime}. Neither does it use @code{atime} (the last time the
+contents of the file were looked at).
+
+Date specifiers can have embedded spaces. Because of this, you may need
+to quote date arguments to keep the shell from parsing them as separate
+arguments. For example, the following command will add to the archive
+all the files modified less than two days ago:
+
+@smallexample
+$ @kbd{tar -cf foo.tar --newer-mtime '2 days ago'}
+@end smallexample
+
+When any of these options is used with the option @option{--verbose}
+(@pxref{verbose tutorial}) @GNUTAR{} will try to convert the specified
+date back to its textual representation and compare that with the
+one given with the option. If the two dates differ, @command{tar} will
+print a warning saying what date it will use. This is to help user
+ensure he is using the right date. For example:
+
+@smallexample
+@group
+$ @kbd{tar -c -f archive.tar --after-date='10 days ago' .}
+tar: Option --after-date: Treating date `10 days ago' as 2006-06-11
+13:19:37.232434
+@end group
+@end smallexample
+
+@quotation
+@strong{Please Note:} @option{--after-date} and @option{--newer-mtime}
+should not be used for incremental backups. @xref{Incremental Dumps},
+for proper way of creating incremental backups.
+@end quotation
+
+@node recurse
+@section Descending into Directories
+@cindex Avoiding recursion in directories
+@cindex Descending directories, avoiding
+@cindex Directories, avoiding recursion
+@cindex Recursion in directories, avoiding
+
+Usually, @command{tar} will recursively explore all directories (either
+those given on the command line or through the @option{--files-from}
+option) for the various files they contain. However, you may not always
+want @command{tar} to act this way.
+
+@opindex no-recursion
+@cindex @command{find}, using with @command{tar}
+The @option{--no-recursion} option inhibits @command{tar}'s recursive descent
+into specified directories. If you specify @option{--no-recursion}, you can
+use the @command{find} (@pxref{Top,, find, find, GNU Find Manual})
+utility for hunting through levels of directories to
+construct a list of file names which you could then pass to @command{tar}.
+@command{find} allows you to be more selective when choosing which files to
+archive; see @ref{files}, for more information on using @command{find} with
+@command{tar}.
+
+@table @option
+@item --no-recursion
+Prevents @command{tar} from recursively descending directories.
+
+@opindex recursion
+@item --recursion
+Requires @command{tar} to recursively descend directories.
+This is the default.
+@end table
+
+When you use @option{--no-recursion}, @GNUTAR{} grabs
+directory entries themselves, but does not descend on them
+recursively. Many people use @command{find} for locating files they
+want to back up, and since @command{tar} @emph{usually} recursively
+descends on directories, they have to use the @samp{@w{-not -type d}}
+test in their @command{find} invocation (@pxref{Type, Type, Type test,
+find, Finding Files}), as they usually do not want all the files in a
+directory. They then use the @option{--files-from} option to archive
+the files located via @command{find}.
+
+The problem when restoring files archived in this manner is that the
+directories themselves are not in the archive; so the
+@option{--same-permissions} (@option{--preserve-permissions},
+@option{-p}) option does not affect them---while users might really
+like it to. Specifying @option{--no-recursion} is a way to tell
+@command{tar} to grab only the directory entries given to it, adding
+no new files on its own. To summarize, if you use @command{find} to
+create a list of files to be stored in an archive, use it as follows:
+
+@smallexample
+@group
+$ @kbd{find @var{dir} @var{tests} | \
+ tar -cf @var{archive} -T - --no-recursion}
+@end group
+@end smallexample
+
+The @option{--no-recursion} option also applies when extracting: it
+causes @command{tar} to extract only the matched directory entries, not
+the files under those directories.
+
+The @option{--no-recursion} option also affects how globbing patterns
+are interpreted (@pxref{controlling pattern-matching}).
+
+The @option{--no-recursion} and @option{--recursion} options apply to
+later options and operands, and can be overridden by later occurrences
+of @option{--no-recursion} and @option{--recursion}. For example:
+
+@smallexample
+$ @kbd{tar -cf jams.tar --no-recursion grape --recursion grape/concord}
+@end smallexample
+
+@noindent
+creates an archive with one entry for @file{grape}, and the recursive
+contents of @file{grape/concord}, but no entries under @file{grape}
+other than @file{grape/concord}.
+
+@node one
+@section Crossing File System Boundaries
+@cindex File system boundaries, not crossing
+
+@command{tar} will normally automatically cross file system boundaries in
+order to archive files which are part of a directory tree. You can
+change this behavior by running @command{tar} and specifying
+@option{--one-file-system}. This option only affects files that are
+archived because they are in a directory that is being archived;
+@command{tar} will still archive files explicitly named on the command line
+or through @option{--files-from}, regardless of where they reside.
+
+@table @option
+@opindex one-file-system
+@item --one-file-system
+Prevents @command{tar} from crossing file system boundaries when
+archiving. Use in conjunction with any write operation.
+@end table
+
+The @option{--one-file-system} option causes @command{tar} to modify its
+normal behavior in archiving the contents of directories. If a file in
+a directory is not on the same file system as the directory itself, then
+@command{tar} will not archive that file. If the file is a directory
+itself, @command{tar} will not archive anything beneath it; in other words,
+@command{tar} will not cross mount points.
+
+This option is useful for making full or incremental archival backups of
+a file system. If this option is used in conjunction with
+@option{--verbose} (@option{-v}), files that are excluded are
+mentioned by name on the standard error.
+
+@menu
+* directory:: Changing Directory
+* absolute:: Absolute File Names
+@end menu
+
+@node directory
+@subsection Changing the Working Directory
+
+@FIXME{need to read over this node now for continuity; i've switched
+things around some.}
+
+@cindex Changing directory mid-stream
+@cindex Directory, changing mid-stream
+@cindex Working directory, specifying
+To change the working directory in the middle of a list of file names,
+either on the command line or in a file specified using
+@option{--files-from} (@option{-T}), use @option{--directory} (@option{-C}).
+This will change the working directory to the specified directory
+after that point in the list.
+
+@table @option
+@opindex directory
+@item --directory=@var{directory}
+@itemx -C @var{directory}
+Changes the working directory in the middle of a command line.
+@end table
+
+For example,
+
+@smallexample
+$ @kbd{tar -c -f jams.tar grape prune -C food cherry}
+@end smallexample
+
+@noindent
+will place the files @file{grape} and @file{prune} from the current
+directory into the archive @file{jams.tar}, followed by the file
+@file{cherry} from the directory @file{food}. This option is especially
+useful when you have several widely separated files that you want to
+store in the same archive.
+
+Note that the file @file{cherry} is recorded in the archive under the
+precise name @file{cherry}, @emph{not} @file{food/cherry}. Thus, the
+archive will contain three files that all appear to have come from the
+same directory; if the archive is extracted with plain @samp{tar
+--extract}, all three files will be written in the current directory.
+
+Contrast this with the command,
+
+@smallexample
+$ @kbd{tar -c -f jams.tar grape prune -C food red/cherry}
+@end smallexample
+
+@noindent
+which records the third file in the archive under the name
+@file{red/cherry} so that, if the archive is extracted using
+@samp{tar --extract}, the third file will be written in a subdirectory
+named @file{red}.
+
+You can use the @option{--directory} option to make the archive
+independent of the original name of the directory holding the files.
+The following command places the files @file{/etc/passwd},
+@file{/etc/hosts}, and @file{/lib/libc.a} into the archive
+@file{foo.tar}:
+
+@smallexample
+$ @kbd{tar -c -f foo.tar -C /etc passwd hosts -C /lib libc.a}
+@end smallexample
+
+@noindent
+However, the names of the archive members will be exactly what they were
+on the command line: @file{passwd}, @file{hosts}, and @file{libc.a}.
+They will not appear to be related by file name to the original
+directories where those files were located.
+
+Note that @option{--directory} options are interpreted consecutively. If
+@option{--directory} specifies a relative file name, it is interpreted
+relative to the then current directory, which might not be the same as
+the original current working directory of @command{tar}, due to a previous
+@option{--directory} option.
+
+When using @option{--files-from} (@pxref{files}), you can put various
+@command{tar} options (including @option{-C}) in the file list. Notice,
+however, that in this case the option and its argument may not be
+separated by whitespace. If you use short option, its argument must
+either follow the option letter immediately, without any intervening
+whitespace, or occupy the next line. Otherwise, if you use long
+option, separate its argument by an equal sign.
+
+For instance, the file list for the above example will be:
+
+@smallexample
+@group
+-C/etc
+passwd
+hosts
+--directory=/lib
+libc.a
+@end group
+@end smallexample
+
+@noindent
+To use it, you would invoke @command{tar} as follows:
+
+@smallexample
+$ @kbd{tar -c -f foo.tar --files-from list}
+@end smallexample
+
+The interpretation of @option{--directory} is disabled by
+@option{--null} option.
+
+@node absolute
+@subsection Absolute File Names
+@cindex absolute file names
+@cindex file names, absolute
+
+By default, @GNUTAR{} drops a leading @samp{/} on
+input or output, and complains about file names containing a @file{..}
+component. There is an option that turns off this behavior:
+
+@table @option
+@opindex absolute-names
+@item --absolute-names
+@itemx -P
+Do not strip leading slashes from file names, and permit file names
+containing a @file{..} file name component.
+@end table
+
+When @command{tar} extracts archive members from an archive, it strips any
+leading slashes (@samp{/}) from the member name. This causes absolute
+member names in the archive to be treated as relative file names. This
+allows you to have such members extracted wherever you want, instead of
+being restricted to extracting the member in the exact directory named
+in the archive. For example, if the archive member has the name
+@file{/etc/passwd}, @command{tar} will extract it as if the name were
+really @file{etc/passwd}.
+
+File names containing @file{..} can cause problems when extracting, so
+@command{tar} normally warns you about such files when creating an
+archive, and rejects attempts to extracts such files.
+
+Other @command{tar} programs do not do this. As a result, if you
+create an archive whose member names start with a slash, they will be
+difficult for other people with a non-@GNUTAR{}
+program to use. Therefore, @GNUTAR{} also strips
+leading slashes from member names when putting members into the
+archive. For example, if you ask @command{tar} to add the file
+@file{/bin/ls} to an archive, it will do so, but the member name will
+be @file{bin/ls}@footnote{A side effect of this is that when
+@option{--create} is used with @option{--verbose} the resulting output
+is not, generally speaking, the same as the one you'd get running
+@kbd{tar --list} command. This may be important if you use some
+scripts for comparing both outputs. @xref{listing member and file names},
+for the information on how to handle this case.}.
+
+If you use the @option{--absolute-names} (@option{-P}) option,
+@command{tar} will do none of these transformations.
+
+To archive or extract files relative to the root directory, specify
+the @option{--absolute-names} (@option{-P}) option.
+
+Normally, @command{tar} acts on files relative to the working
+directory---ignoring superior directory names when archiving, and
+ignoring leading slashes when extracting.
+
+When you specify @option{--absolute-names} (@option{-P}),
+@command{tar} stores file names including all superior directory
+names, and preserves leading slashes. If you only invoked
+@command{tar} from the root directory you would never need the
+@option{--absolute-names} option, but using this option
+may be more convenient than switching to root.
+
+@FIXME{Should be an example in the tutorial/wizardry section using this
to transfer files between systems.}
-@FIXME{Is write access an issue?}
+@table @option
+@item --absolute-names
+Preserves full file names (including superior directory names) when
+archiving files. Preserves leading slash when extracting files.
+
+@end table
+
+@command{tar} prints out a message about removing the @samp{/} from
+file names. This message appears once per @GNUTAR{}
+invocation. It represents something which ought to be told; ignoring
+what it means can cause very serious surprises, later.
+
+Some people, nevertheless, do not want to see this message. Wanting to
+play really dangerously, one may of course redirect @command{tar} standard
+error to the sink. For example, under @command{sh}:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar /home 2> /dev/null}
+@end smallexample
+
+@noindent
+Another solution, both nicer and simpler, would be to change to
+the @file{/} directory first, and then avoid absolute notation.
+For example:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar -C / home}
+@end smallexample
+
+@xref{Integrity}, for some of the security-related implications
+of using this option.
+
+@include getdate.texi
+
+@node Formats
+@chapter Controlling the Archive Format
+
+@cindex Tar archive formats
+Due to historical reasons, there are several formats of tar archives.
+All of them are based on the same principles, but have some subtle
+differences that often make them incompatible with each other.
+
+GNU tar is able to create and handle archives in a variety of formats.
+The most frequently used formats are (in alphabetical order):
+
+@table @asis
+@item gnu
+Format used by @GNUTAR{} versions up to 1.13.25. This format derived
+from an early @acronym{POSIX} standard, adding some improvements such as
+sparse file handling and incremental archives. Unfortunately these
+features were implemented in a way incompatible with other archive
+formats.
+
+Archives in @samp{gnu} format are able to hold file names of unlimited
+length.
+
+@item oldgnu
+Format used by @GNUTAR{} of versions prior to 1.12.
+
+@item v7
+Archive format, compatible with the V7 implementation of tar. This
+format imposes a number of limitations. The most important of them
+are:
+
+@enumerate
+@item The maximum length of a file name is limited to 99 characters.
+@item The maximum length of a symbolic link is limited to 99 characters.
+@item It is impossible to store special files (block and character
+devices, fifos etc.)
+@item Maximum value of user or group @acronym{ID} is limited to 2097151 (7777777
+octal)
+@item V7 archives do not contain symbolic ownership information (user
+and group name of the file owner).
+@end enumerate
+
+This format has traditionally been used by Automake when producing
+Makefiles. This practice will change in the future, in the meantime,
+however this means that projects containing file names more than 99
+characters long will not be able to use @GNUTAR{} @value{VERSION} and
+Automake prior to 1.9.
+
+@item ustar
+Archive format defined by @acronym{POSIX.1-1988} specification. It stores
+symbolic ownership information. It is also able to store
+special files. However, it imposes several restrictions as well:
+
+@enumerate
+@item The maximum length of a file name is limited to 256 characters,
+provided that the file name can be split at a directory separator in
+two parts, first of them being at most 155 bytes long. So, in most
+cases the maximum file name length will be shorter than 256
+characters.
+@item The maximum length of a symbolic link name is limited to
+100 characters.
+@item Maximum size of a file the archive is able to accommodate
+is 8GB
+@item Maximum value of UID/GID is 2097151.
+@item Maximum number of bits in device major and minor numbers is 21.
+@end enumerate
+
+@item star
+Format used by J@"org Schilling @command{star}
+implementation. @GNUTAR{} is able to read @samp{star} archives but
+currently does not produce them.
+
+@item posix
+Archive format defined by @acronym{POSIX.1-2001} specification. This is the
+most flexible and feature-rich format. It does not impose any
+restrictions on file sizes or file name lengths. This format is quite
+recent, so not all tar implementations are able to handle it properly.
+However, this format is designed in such a way that any tar
+implementation able to read @samp{ustar} archives will be able to read
+most @samp{posix} archives as well, with the only exception that any
+additional information (such as long file names etc.) will in such
+case be extracted as plain text files along with the files it refers to.
+
+This archive format will be the default format for future versions
+of @GNUTAR{}.
+
+@end table
+
+The following table summarizes the limitations of each of these
+formats:
+
+@multitable @columnfractions .10 .20 .20 .20 .20
+@headitem Format @tab UID @tab File Size @tab File Name @tab Devn
+@item gnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
+@item oldgnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
+@item v7 @tab 2097151 @tab 8GB @tab 99 @tab n/a
+@item ustar @tab 2097151 @tab 8GB @tab 256 @tab 21
+@item posix @tab Unlimited @tab Unlimited @tab Unlimited @tab Unlimited
+@end multitable
+
+The default format for @GNUTAR{} is defined at compilation
+time. You may check it by running @command{tar --help}, and examining
+the last lines of its output. Usually, @GNUTAR{} is configured
+to create archives in @samp{gnu} format, however, future version will
+switch to @samp{posix}.
+
+@menu
+* Compression:: Using Less Space through Compression
+* Attributes:: Handling File Attributes
+* Portability:: Making @command{tar} Archives More Portable
+* cpio:: Comparison of @command{tar} and @command{cpio}
+@end menu
+
+@node Compression
+@section Using Less Space through Compression
+
+@menu
+* gzip:: Creating and Reading Compressed Archives
+* sparse:: Archiving Sparse Files
+@end menu
+
+@node gzip
+@subsection Creating and Reading Compressed Archives
+@cindex Compressed archives
+@cindex Storing archives in compressed format
+
+@cindex gzip
+@cindex bzip2
+@cindex lzip
+@cindex lzma
+@cindex lzop
+@cindex compress
+@GNUTAR{} is able to create and read compressed archives. It supports
+a wide variety of compression programs, namely: @command{gzip},
+@command{bzip2}, @command{lzip}, @command{lzma}, @command{lzop},
+@command{xz} and traditional @command{compress}. The latter is
+supported mostly for backward compatibility, and we recommend
+against using it, because it is by far less effective than the other
+compression programs@footnote{It also had patent problems in the past.}.
+
+Creating a compressed archive is simple: you just specify a
+@dfn{compression option} along with the usual archive creation
+commands. The compression option is @option{-z} (@option{--gzip}) to
+create a @command{gzip} compressed archive, @option{-j}
+(@option{--bzip2}) to create a @command{bzip2} compressed archive,
+@option{--lzip} to create an @asis{lzip} compressed archive,
+@option{-J} (@option{--xz}) to create an @asis{XZ} archive,
+@option{--lzma} to create an @asis{LZMA} compressed
+archive, @option{--lzop} to create an @asis{LSOP} archive, and
+@option{-Z} (@option{--compress}) to use @command{compress} program.
+For example:
+
+@smallexample
+$ @kbd{tar cfz archive.tar.gz .}
+@end smallexample
+
+You can also let @GNUTAR{} select the compression program based on
+the suffix of the archive file name. This is done using
+@option{--auto-compress} (@option{-a}) command line option. For
+example, the following invocation will use @command{bzip2} for
+compression:
+
+@smallexample
+$ @kbd{tar cfa archive.tar.bz2 .}
+@end smallexample
+
+@noindent
+whereas the following one will use @command{lzma}:
+
+@smallexample
+$ @kbd{tar cfa archive.tar.lzma .}
+@end smallexample
+
+For a complete list of file name suffixes recognized by @GNUTAR{},
+see @ref{auto-compress}.
+
+Reading compressed archive is even simpler: you don't need to specify
+any additional options as @GNUTAR{} recognizes its format
+automatically. Thus, the following commands will list and extract the
+archive created in previous example:
+
+@smallexample
+# List the compressed archive
+$ @kbd{tar tf archive.tar.gz}
+# Extract the compressed archive
+$ @kbd{tar xf archive.tar.gz}
+@end smallexample
+
+The format recognition algorithm is based on @dfn{signatures}, a
+special byte sequences in the beginning of file, that are specific for
+certain compression formats. If this approach fails, @command{tar}
+falls back to using archive name suffix to determine its format
+(@pxref{auto-compress}, for a list of recognized suffixes).
+
+The only case when you have to specify a decompression option while
+reading the archive is when reading from a pipe or from a tape drive
+that does not support random access. However, in this case @GNUTAR{}
+will indicate which option you should use. For example:
+
+@smallexample
+$ @kbd{cat archive.tar.gz | tar tf -}
+tar: Archive is compressed. Use -z option
+tar: Error is not recoverable: exiting now
+@end smallexample
+
+If you see such diagnostics, just add the suggested option to the
+invocation of @GNUTAR{}:
+
+@smallexample
+$ @kbd{cat archive.tar.gz | tar tfz -}
+@end smallexample
+
+Notice also, that there are several restrictions on operations on
+compressed archives. First of all, compressed archives cannot be
+modified, i.e., you cannot update (@option{--update}, alias @option{-u})
+them or delete (@option{--delete}) members from them or
+add (@option{--append}, alias @option{-r}) members to them. Likewise, you
+cannot append another @command{tar} archive to a compressed archive using
+@option{--concatenate} (@option{-A}). Secondly, multi-volume
+archives cannot be compressed.
+
+The following options allow to select a particular compressor program:
+
+@table @option
+@opindex gzip
+@opindex ungzip
+@item -z
+@itemx --gzip
+@itemx --ungzip
+Filter the archive through @command{gzip}.
+
+@opindex xz
+@item -J
+@itemx --xz
+Filter the archive through @code{xz}.
+
+@item -j
+@itemx --bzip2
+Filter the archive through @code{bzip2}.
+
+@opindex lzip
+@item --lzip
+Filter the archive through @command{lzip}.
+
+@opindex lzma
+@item --lzma
+Filter the archive through @command{lzma}.
+
+@opindex lzop
+@item --lzop
+Filter the archive through @command{lzop}.
+
+@opindex compress
+@opindex uncompress
+@item -Z
+@itemx --compress
+@itemx --uncompress
+Filter the archive through @command{compress}.
+@end table
+
+When any of these options is given, @GNUTAR{} searches the compressor
+binary in the current path and invokes it. The name of the compressor
+program is specified at compilation time using a corresponding
+@option{--with-@var{compname}} option to @command{configure}, e.g.
+@option{--with-bzip2} to select a specific @command{bzip2} binary.
+@xref{lbzip2}, for a detailed discussion.
+
+The output produced by @command{tar --help} shows the actual
+compressor names along with each of these options.
+
+You can use any of these options on physical devices (tape drives,
+etc.) and remote files as well as on normal files; data to or from
+such devices or remote files is reblocked by another copy of the
+@command{tar} program to enforce the specified (or default) record
+size. The default compression parameters are used. Most compression
+programs allow to override these by setting a program-specific
+environment variable. For example, when using @command{gzip} you can
+use @env{GZIP} as in the example below:
+
+@smallexample
+$ @kbd{GZIP=--best tar cfz archive.tar.gz subdir}
+@end smallexample
+
+@noindent
+Another way would be to use the @option{-I} option instead (see
+below), e.g.:
+
+@smallexample
+$ @kbd{tar -cf archive.tar.gz -I 'gzip --best' subdir}
+@end smallexample
+
+@noindent
+Finally, the third, traditional, way to achieve the same result is to
+use pipe:
+
+@smallexample
+$ @kbd{tar cf - subdir | gzip --best -c - > archive.tar.gz}
+@end smallexample
+
+@cindex corrupted archives
+About corrupted compressed archives: compressed files have no
+redundancy, for maximum compression. The adaptive nature of the
+compression scheme means that the compression tables are implicitly
+spread all over the archive. If you lose a few blocks, the dynamic
+construction of the compression tables becomes unsynchronized, and there
+is little chance that you could recover later in the archive.
+
+Another compression options provide a better control over creating
+compressed archives. These are:
+
+@table @option
+@anchor{auto-compress}
+@opindex auto-compress
+@item --auto-compress
+@itemx -a
+Select a compression program to use by the archive file name
+suffix. The following suffixes are recognized:
+
+@multitable @columnfractions 0.3 0.6
+@headitem Suffix @tab Compression program
+@item @samp{.gz} @tab @command{gzip}
+@item @samp{.tgz} @tab @command{gzip}
+@item @samp{.taz} @tab @command{gzip}
+@item @samp{.Z} @tab @command{compress}
+@item @samp{.taZ} @tab @command{compress}
+@item @samp{.bz2} @tab @command{bzip2}
+@item @samp{.tz2} @tab @command{bzip2}
+@item @samp{.tbz2} @tab @command{bzip2}
+@item @samp{.tbz} @tab @command{bzip2}
+@item @samp{.lz} @tab @command{lzip}
+@item @samp{.lzma} @tab @command{lzma}
+@item @samp{.tlz} @tab @command{lzma}
+@item @samp{.lzo} @tab @command{lzop}
+@item @samp{.xz} @tab @command{xz}
+@end multitable
+
+@opindex use-compress-program
+@item --use-compress-program=@var{prog}
+@itemx -I=@var{prog}
+Use external compression program @var{prog}. Use this option if you
+are not happy with the compression program associated with the suffix
+at compile time or if you have a compression program that @GNUTAR{}
+does not support. There are two requirements to which @var{prog}
+should comply:
+
+First, when called without options, it should read data from standard
+input, compress it and output it on standard output.
+
+Secondly, if called with @option{-d} argument, it should do exactly
+the opposite, i.e., read the compressed data from the standard input
+and produce uncompressed data on the standard output.
+@end table
+
+@cindex gpg, using with tar
+@cindex gnupg, using with tar
+@cindex Using encrypted archives
+The @option{--use-compress-program} option, in particular, lets you
+implement your own filters, not necessarily dealing with
+compression/decompression. For example, suppose you wish to implement
+PGP encryption on top of compression, using @command{gpg} (@pxref{Top,
+gpg, gpg ---- encryption and signing tool, gpg, GNU Privacy Guard
+Manual}). The following script does that:
+
+@smallexample
+@group
+#! /bin/sh
+case $1 in
+-d) gpg --decrypt - | gzip -d -c;;
+'') gzip -c | gpg -s;;
+*) echo "Unknown option $1">&2; exit 1;;
+esac
+@end group
+@end smallexample
+
+Suppose you name it @file{gpgz} and save it somewhere in your
+@env{PATH}. Then the following command will create a compressed
+archive signed with your private key:
+
+@smallexample
+$ @kbd{tar -cf foo.tar.gpgz -Igpgz .}
+@end smallexample
+
+@noindent
+Likewise, the command below will list its contents:
+
+@smallexample
+$ @kbd{tar -tf foo.tar.gpgz -Igpgz .}
+@end smallexample
+
+@ignore
+The above is based on the following discussion:
+
+ I have one question, or maybe it's a suggestion if there isn't a way
+ to do it now. I would like to use @option{--gzip}, but I'd also like
+ the output to be fed through a program like @acronym{GNU}
+ @command{ecc} (actually, right now that's @samp{exactly} what I'd like
+ to use :-)), basically adding ECC protection on top of compression.
+ It seems as if this should be quite easy to do, but I can't work out
+ exactly how to go about it. Of course, I can pipe the standard output
+ of @command{tar} through @command{ecc}, but then I lose (though I
+ haven't started using it yet, I confess) the ability to have
+ @command{tar} use @command{rmt} for it's I/O (I think).
+
+ I think the most straightforward thing would be to let me specify a
+ general set of filters outboard of compression (preferably ordered,
+ so the order can be automatically reversed on input operations, and
+ with the options they require specifiable), but beggars shouldn't be
+ choosers and anything you decide on would be fine with me.
+
+ By the way, I like @command{ecc} but if (as the comments say) it can't
+ deal with loss of block sync, I'm tempted to throw some time at adding
+ that capability. Supposing I were to actually do such a thing and
+ get it (apparently) working, do you accept contributed changes to
+ utilities like that? (Leigh Clayton @file{loc@@soliton.com}, May 1995).
+
+ Isn't that exactly the role of the
+ @option{--use-compress-prog=@var{program}} option?
+ I never tried it myself, but I suspect you may want to write a
+ @var{prog} script or program able to filter stdin to stdout to
+ way you want. It should recognize the @option{-d} option, for when
+ extraction is needed rather than creation.
+
+ It has been reported that if one writes compressed data (through the
+ @option{--gzip} or @option{--compress} options) to a DLT and tries to use
+ the DLT compression mode, the data will actually get bigger and one will
+ end up with less space on the tape.
+@end ignore
+
+@menu
+* lbzip2:: Using lbzip2 with @GNUTAR{}.
+@end menu
+
+@node lbzip2
+@subsubsection Using lbzip2 with @GNUTAR{}.
+@cindex lbzip2
+@cindex Laszlo Ersek
+ @command{Lbzip2} is a multithreaded utility for handling
+@samp{bzip2} compression, written by Laszlo Ersek. It makes use of
+multiple processors to speed up its operation and in general works
+considerably faster than @command{bzip2}. For a detailed description
+of @command{lbzip2} see @uref{http://freshmeat.net/@/projects/@/lbzip2} and
+@uref{http://www.linuxinsight.com/@/lbzip2-parallel-bzip2-utility.html,
+lbzip2: parallel bzip2 utility}.
+
+ Recent versions of @command{lbzip2} are mostly command line compatible
+with @command{bzip2}, which makes it possible to automatically invoke
+it via the @option{--bzip2} @GNUTAR{} command line option. To do so,
+@GNUTAR{} must be configured with the @option{--with-bzip2} command
+line option, like this:
+
+@smallexample
+$ @kbd{./configure --with-bzip2=lbzip2 [@var{other-options}]}
+@end smallexample
+
+ Once configured and compiled this way, @command{tar --help} will show the
+following:
+
+@smallexample
+@group
+$ @kbd{tar --help | grep -- --bzip2}
+ -j, --bzip2 filter the archive through lbzip2
+@end group
+@end smallexample
+
+@noindent
+which means that running @command{tar --bzip2} will invoke @command{lbzip2}.
+
+@node sparse
+@subsection Archiving Sparse Files
+@cindex Sparse Files
+
+Files in the file system occasionally have @dfn{holes}. A @dfn{hole}
+in a file is a section of the file's contents which was never written.
+The contents of a hole reads as all zeros. On many operating systems,
+actual disk storage is not allocated for holes, but they are counted
+in the length of the file. If you archive such a file, @command{tar}
+could create an archive longer than the original. To have @command{tar}
+attempt to recognize the holes in a file, use @option{--sparse}
+(@option{-S}). When you use this option, then, for any file using
+less disk space than would be expected from its length, @command{tar}
+searches the file for consecutive stretches of zeros. It then records
+in the archive for the file where the consecutive stretches of zeros
+are, and only archives the ``real contents'' of the file. On
+extraction (using @option{--sparse} is not needed on extraction) any
+such files have holes created wherever the continuous stretches of zeros
+were found. Thus, if you use @option{--sparse}, @command{tar} archives
+won't take more space than the original.
+
+@table @option
+@opindex sparse
+@item -S
+@itemx --sparse
+This option instructs @command{tar} to test each file for sparseness
+before attempting to archive it. If the file is found to be sparse it
+is treated specially, thus allowing to decrease the amount of space
+used by its image in the archive.
+
+This option is meaningful only when creating or updating archives. It
+has no effect on extraction.
+@end table
+
+Consider using @option{--sparse} when performing file system backups,
+to avoid archiving the expanded forms of files stored sparsely in the
+system.
+
+Even if your system has no sparse files currently, some may be
+created in the future. If you use @option{--sparse} while making file
+system backups as a matter of course, you can be assured the archive
+will never take more space on the media than the files take on disk
+(otherwise, archiving a disk filled with sparse files might take
+hundreds of tapes). @xref{Incremental Dumps}.
+
+However, be aware that @option{--sparse} option presents a serious
+drawback. Namely, in order to determine if the file is sparse
+@command{tar} has to read it before trying to archive it, so in total
+the file is read @strong{twice}. So, always bear in mind that the
+time needed to process all files with this option is roughly twice
+the time needed to archive them without it.
+@FIXME{A technical note:
+
+Programs like @command{dump} do not have to read the entire file; by
+examining the file system directly, they can determine in advance
+exactly where the holes are and thus avoid reading through them. The
+only data it need read are the actual allocated data blocks.
+@GNUTAR{} uses a more portable and straightforward
+archiving approach, it would be fairly difficult that it does
+otherwise. Elizabeth Zwicky writes to @file{comp.unix.internals}, on
+1990-12-10:
+
+@quotation
+What I did say is that you cannot tell the difference between a hole and an
+equivalent number of nulls without reading raw blocks. @code{st_blocks} at
+best tells you how many holes there are; it doesn't tell you @emph{where}.
+Just as programs may, conceivably, care what @code{st_blocks} is (care
+to name one that does?), they may also care where the holes are (I have
+no examples of this one either, but it's equally imaginable).
+
+I conclude from this that good archivers are not portable. One can
+arguably conclude that if you want a portable program, you can in good
+conscience restore files with as many holes as possible, since you can't
+get it right.
+@end quotation
+}
+
+@cindex sparse formats, defined
+When using @samp{POSIX} archive format, @GNUTAR{} is able to store
+sparse files using in three distinct ways, called @dfn{sparse
+formats}. A sparse format is identified by its @dfn{number},
+consisting, as usual of two decimal numbers, delimited by a dot. By
+default, format @samp{1.0} is used. If, for some reason, you wish to
+use an earlier format, you can select it using
+@option{--sparse-version} option.
@table @option
-@item --absolute-names
-Preserves full file names (including superior directory names) when
-archiving files. Preserves leading slash when extracting files.
+@opindex sparse-version
+@item --sparse-version=@var{version}
+Select the format to store sparse files in. Valid @var{version} values
+are: @samp{0.0}, @samp{0.1} and @samp{1.0}. @xref{Sparse Formats},
+for a detailed description of each format.
@end table
-@FIXME{this is still horrible; need to talk with dan on monday.}
-
-@command{tar} prints out a message about removing the @samp{/} from
-file names. This message appears once per @GNUTAR{}
-invocation. It represents something which ought to be told; ignoring
-what it means can cause very serious surprises, later.
+Using @option{--sparse-format} option implies @option{--sparse}.
-Some people, nevertheless, do not want to see this message. Wanting to
-play really dangerously, one may of course redirect @command{tar} standard
-error to the sink. For example, under @command{sh}:
+@node Attributes
+@section Handling File Attributes
+@cindex atrributes, files
+@cindex file attributes
-@smallexample
-$ @kbd{tar -c -f archive.tar /home 2> /dev/null}
-@end smallexample
+When @command{tar} reads files, it updates their access times. To
+avoid this, use the @option{--atime-preserve[=METHOD]} option, which can either
+reset the access time retroactively or avoid changing it in the first
+place.
-@noindent
-Another solution, both nicer and simpler, would be to change to
-the @file{/} directory first, and then avoid absolute notation.
-For example:
+@table @option
+@opindex atime-preserve
+@item --atime-preserve
+@itemx --atime-preserve=replace
+@itemx --atime-preserve=system
+Preserve the access times of files that are read. This works only for
+files that you own, unless you have superuser privileges.
-@smallexample
-$ @kbd{(cd / && tar -c -f archive.tar home)}
-$ @kbd{tar -c -f archive.tar -C / home}
-@end smallexample
+@option{--atime-preserve=replace} works on most systems, but it also
+restores the data modification time and updates the status change
+time. Hence it doesn't interact with incremental dumps nicely
+(@pxref{Incremental Dumps}), and it can set access or data modification times
+incorrectly if other programs access the file while @command{tar} is
+running.
-@include getdate.texi
+@option{--atime-preserve=system} avoids changing the access time in
+the first place, if the operating system supports this.
+Unfortunately, this may or may not work on any given operating system
+or file system. If @command{tar} knows for sure it won't work, it
+complains right away.
-@node Formats
-@chapter Controlling the Archive Format
+Currently @option{--atime-preserve} with no operand defaults to
+@option{--atime-preserve=replace}, but this is intended to change to
+@option{--atime-preserve=system} when the latter is better-supported.
-Due to historical reasons, there are several formats of tar archives.
-All of them are based on the same principles, but have some subtle
-differences that often make them incompatible with each other.
+@opindex touch
+@item -m
+@itemx --touch
+Do not extract data modification time.
-GNU tar is able to create and handle archives in a variety of formats.
-The most frequently used formats are (in alphabetical order):
+When this option is used, @command{tar} leaves the data modification times
+of the files it extracts as the times when the files were extracted,
+instead of setting it to the times recorded in the archive.
-@table @asis
-@item gnu
-Format used by @GNUTAR{} versions up to 1.13.25. This format derived
-from an early @acronym{POSIX} standard, adding some improvements such as
-sparse file handling and incremental archives. Unfortunately these
-features were implemented in a way incompatible with other archive
-formats.
+This option is meaningless with @option{--list} (@option{-t}).
-Archives in @samp{gnu} format are able to hold pathnames of unlimited
-length.
+@opindex same-owner
+@item --same-owner
+Create extracted files with the same ownership they have in the
+archive.
-@item oldgnu
-Format used by @GNUTAR{} of versions prior to 1.12.
+This is the default behavior for the superuser,
+so this option is meaningful only for non-root users, when @command{tar}
+is executed on those systems able to give files away. This is
+considered as a security flaw by many people, at least because it
+makes quite difficult to correctly account users for the disk space
+they occupy. Also, the @code{suid} or @code{sgid} attributes of
+files are easily and silently lost when files are given away.
-@item v7
-Archive format, compatible with the V7 implementation of tar. This
-format imposes a number of limitations. The most important of them
-are:
+When writing an archive, @command{tar} writes the user @acronym{ID} and user name
+separately. If it can't find a user name (because the user @acronym{ID} is not
+in @file{/etc/passwd}), then it does not write one. When restoring,
+it tries to look the name (if one was written) up in
+@file{/etc/passwd}. If it fails, then it uses the user @acronym{ID} stored in
+the archive instead.
-@enumerate
-@item The maximum length of a file name is limited to 99 characters.
-@item The maximum length of a symbolic link is limited to 99 characters.
-@item It is impossible to store special files (block and character
-devices, fifos etc.)
-@item Maximum value of user or group ID is limited to 2097151 (7777777
-octal)
-@item V7 archives do not contain symbolic ownership information (user
-and group name of the file owner).
-@end enumerate
+@opindex no-same-owner
+@item --no-same-owner
+@itemx -o
+Do not attempt to restore ownership when extracting. This is the
+default behavior for ordinary users, so this option has an effect
+only for the superuser.
-This format has traditionally been used by Automake when producing
-Makefiles. This practice will change in the future, in the meantime,
-however this means that projects containing filenames more than 99
-characters long will not be able to use @GNUTAR{} @value{VERSION} and
-Automake prior to 1.9.
+@opindex numeric-owner
+@item --numeric-owner
+The @option{--numeric-owner} option allows (ANSI) archives to be written
+without user/group name information or such information to be ignored
+when extracting. It effectively disables the generation and/or use
+of user/group name information. This option forces extraction using
+the numeric ids from the archive, ignoring the names.
-@item ustar
-Archive format defined by @acronym{POSIX.1-1988} specification. It stores
-symbolic ownership information. It is also able to store
-special files. However, it imposes several restrictions as well:
+This is useful in certain circumstances, when restoring a backup from
+an emergency floppy with different passwd/group files for example.
+It is otherwise impossible to extract files with the right ownerships
+if the password file in use during the extraction does not match the
+one belonging to the file system(s) being extracted. This occurs,
+for example, if you are restoring your files after a major crash and
+had booted from an emergency floppy with no password file or put your
+disk into another machine to do the restore.
-@enumerate
-@item The maximum length of a file name is limited to 256 characters,
-provided that the filename can be split at directory separator in
-two parts, first of them being at most 155 bytes long. So, in most
-cases the maximum file name length will be shorter than 256
-characters.
-@item The maximum length of a symbolic link name is limited to
-100 characters.
-@item Maximum size of a file the archive is able to accomodate
-is 8GB
-@item Maximum value of UID/GID is 2097151.
-@item Maximum number of bits in device major and minor numbers is 21.
-@end enumerate
+The numeric ids are @emph{always} saved into @command{tar} archives.
+The identifying names are added at create time when provided by the
+system, unless @option{--format=oldgnu} is used. Numeric ids could be
+used when moving archives between a collection of machines using
+a centralized management for attribution of numeric ids to users
+and groups. This is often made through using the NIS capabilities.
-@item star
-Format used by J@"org Schilling @command{star}
-implementation. @GNUTAR{} is able to read @samp{star} archives but
-currently does not produce them.
+When making a @command{tar} file for distribution to other sites, it
+is sometimes cleaner to use a single owner for all files in the
+distribution, and nicer to specify the write permission bits of the
+files as stored in the archive independently of their actual value on
+the file system. The way to prepare a clean distribution is usually
+to have some Makefile rule creating a directory, copying all needed
+files in that directory, then setting ownership and permissions as
+wanted (there are a lot of possible schemes), and only then making a
+@command{tar} archive out of this directory, before cleaning
+everything out. Of course, we could add a lot of options to
+@GNUTAR{} for fine tuning permissions and ownership.
+This is not the good way, I think. @GNUTAR{} is
+already crowded with options and moreover, the approach just explained
+gives you a great deal of control already.
-@item posix
-Archive format defined by @acronym{POSIX.1-2001} specification. This is the
-most flexible and feature-rich format. It does not impose any
-restrictions on file sizes or filename lengths. This format is quite
-recent, so not all tar implementations are able to handle it properly.
-However, this format is designed in such a way that any tar
-implementation able to read @samp{ustar} archives will be able to read
-most @samp{posix} archives as well, with the only exception that any
-additional information (such as long file names etc.) will in such
-case be extracted as plain text files along with the files it refers to.
+@xopindex{same-permissions, short description}
+@xopindex{preserve-permissions, short description}
+@item -p
+@itemx --same-permissions
+@itemx --preserve-permissions
+Extract all protection information.
-This archive format will be the default format for future versions
-of @GNUTAR{}.
+This option causes @command{tar} to set the modes (access permissions) of
+extracted files exactly as recorded in the archive. If this option
+is not used, the current @code{umask} setting limits the permissions
+on extracted files. This option is by default enabled when
+@command{tar} is executed by a superuser.
-@end table
-The following table summarizes the limitations of each of these
-formats:
+This option is meaningless with @option{--list} (@option{-t}).
-@multitable @columnfractions .10 .20 .20 .20 .20
-@headitem Format @tab UID @tab File Size @tab Path Name @tab Devn
-@item gnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
-@item oldgnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
-@item v7 @tab 2097151 @tab 8GB @tab 99 @tab n/a
-@item ustar @tab 2097151 @tab 8GB @tab 256 @tab 21
-@item posix @tab Unlimited @tab Unlimited @tab Unlimited @tab Unlimited
-@end multitable
+@opindex preserve
+@item --preserve
+Same as both @option{--same-permissions} and @option{--same-order}.
-The default format for @GNUTAR{} is defined at compilation
-time. You may check it by running @command{tar --help}, and examining
-the last lines of its output. Usually, @GNUTAR{} is configured
-to create archives in @samp{gnu} format, however, future version will
-switch to @samp{posix}.
+This option is deprecated, and will be removed in @GNUTAR{} version 1.23.
-@menu
-* Portability:: Making @command{tar} Archives More Portable
-* Compression:: Using Less Space through Compression
-* Attributes:: Handling File Attributes
-* Standard:: The Standard Format
-* Extensions:: @acronym{GNU} Extensions to the Archive Format
-* cpio:: Comparison of @command{tar} and @command{cpio}
-@end menu
+@end table
@node Portability
@section Making @command{tar} Archives More Portable
@menu
* Portable Names:: Portable Names
* dereference:: Symbolic Links
+* hard links:: Hard Links
* old:: Old V7 Archives
* ustar:: Ustar Archives
* gnu:: GNU and old GNU format archives.
* posix:: @acronym{POSIX} archives
* Checksumming:: Checksumming Problems
* Large or Negative Values:: Large files, negative time stamps, etc.
+* Other Tars:: How to Extract GNU-Specific Data Using
+ Other @command{tar} Implementations
@end menu
-@node Portable Names
-@subsection Portable Names
+@node Portable Names
+@subsection Portable Names
+
+Use portable file and member names. A name is portable if it contains
+only @acronym{ASCII} letters and digits, @samp{/}, @samp{.}, @samp{_}, and
+@samp{-}; it cannot be empty, start with @samp{-} or @samp{//}, or
+contain @samp{/-}. Avoid deep directory nesting. For portability to
+old Unix hosts, limit your file name components to 14 characters or
+less.
+
+If you intend to have your @command{tar} archives to be read under
+MSDOS, you should not rely on case distinction for file names, and you
+might use the @acronym{GNU} @command{doschk} program for helping you
+further diagnosing illegal MSDOS names, which are even more limited
+than System V's.
+
+@node dereference
+@subsection Symbolic Links
+@cindex File names, using symbolic links
+@cindex Symbolic link as file name
+
+@opindex dereference
+Normally, when @command{tar} archives a symbolic link, it writes a
+block to the archive naming the target of the link. In that way, the
+@command{tar} archive is a faithful record of the file system contents.
+When @option{--dereference} (@option{-h}) is used with
+@option{--create} (@option{-c}), @command{tar} archives the files
+symbolic links point to, instead of
+the links themselves.
+
+When creating portable archives, use @option{--dereference}
+(@option{-h}): some systems do not support
+symbolic links, and moreover, your distribution might be unusable if
+it contains unresolved symbolic links.
+
+When reading from an archive, the @option{--dereference} (@option{-h})
+option causes @command{tar} to follow an already-existing symbolic
+link when @command{tar} writes or reads a file named in the archive.
+Ordinarily, @command{tar} does not follow such a link, though it may
+remove the link before writing a new file. @xref{Dealing with Old
+Files}.
+
+The @option{--dereference} option is unsafe if an untrusted user can
+modify directories while @command{tar} is running. @xref{Security}.
+
+@node hard links
+@subsection Hard Links
+@cindex File names, using hard links
+@cindex hard links, dereferencing
+@cindex dereferencing hard links
+
+Normally, when @command{tar} archives a hard link, it writes a
+block to the archive naming the target of the link (a @samp{1} type
+block). In that way, the actual file contents is stored in file only
+once. For example, consider the following two files:
+
+@smallexample
+@group
+$ ls
+-rw-r--r-- 2 gray staff 4 2007-10-30 15:11 one
+-rw-r--r-- 2 gray staff 4 2007-10-30 15:11 jeden
+@end group
+@end smallexample
+
+Here, @file{jeden} is a link to @file{one}. When archiving this
+directory with a verbose level 2, you will get an output similar to
+the following:
+
+@smallexample
+$ tar cfvv ../archive.tar .
+drwxr-xr-x gray/staff 0 2007-10-30 15:13 ./
+-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./jeden
+hrw-r--r-- gray/staff 0 2007-10-30 15:11 ./one link to ./jeden
+@end smallexample
+
+The last line shows that, instead of storing two copies of the file,
+@command{tar} stored it only once, under the name @file{jeden}, and
+stored file @file{one} as a hard link to this file.
+
+It may be important to know that all hard links to the given file are
+stored in the archive. For example, this may be necessary for exact
+reproduction of the file system. The following option does that:
+
+@table @option
+@xopindex{check-links, described}
+@item --check-links
+@itemx -l
+Check the number of links dumped for each processed file. If this
+number does not match the total number of hard links for the file, print
+a warning message.
+@end table
+
+For example, trying to archive only file @file{jeden} with this option
+produces the following diagnostics:
-Use portable file and member names. A name is portable if it contains
-only ASCII letters and digits, @samp{/}, @samp{.}, @samp{_}, and
-@samp{-}; it cannot be empty, start with @samp{-} or @samp{//}, or
-contain @samp{/-}. Avoid deep directory nesting. For portability to
-old Unix hosts, limit your file name components to 14 characters or
-less.
+@smallexample
+$ tar -c -f ../archive.tar -l jeden
+tar: Missing links to `jeden'.
+@end smallexample
-If you intend to have your @command{tar} archives to be read under
-MSDOS, you should not rely on case distinction for file names, and you
-might use the @acronym{GNU} @command{doschk} program for helping you
-further diagnosing illegal MSDOS names, which are even more limited
-than System V's.
+Although creating special records for hard links helps keep a faithful
+record of the file system contents and makes archives more compact, it
+may present some difficulties when extracting individual members from
+the archive. For example, trying to extract file @file{one} from the
+archive created in previous examples produces, in the absense of file
+@file{jeden}:
-@node dereference
-@subsection Symbolic Links
-@cindex File names, using symbolic links
-@cindex Symbolic link as file name
+@smallexample
+$ tar xf archive.tar ./one
+tar: ./one: Cannot hard link to `./jeden': No such file or directory
+tar: Error exit delayed from previous errors
+@end smallexample
-Normally, when @command{tar} archives a symbolic link, it writes a
-block to the archive naming the target of the link. In that way, the
-@command{tar} archive is a faithful record of the file system contents.
-@value{op-dereference} is used with @value{op-create}, and causes
-@command{tar} to archive the files symbolic links point to, instead of
-the links themselves. When this option is used, when @command{tar}
-encounters a symbolic link, it will archive the linked-to file,
-instead of simply recording the presence of a symbolic link.
-
-The name under which the file is stored in the file system is not
-recorded in the archive. To record both the symbolic link name and
-the file name in the system, archive the file under both names. If
-all links were recorded automatically by @command{tar}, an extracted file
-might be linked to a file name that no longer exists in the file
-system.
+The reason for this behavior is that @command{tar} cannot seek back in
+the archive to the previous member (in this case, @file{one}), to
+extract it@footnote{There are plans to fix this in future releases.}.
+If you wish to avoid such problems at the cost of a bigger archive,
+use the following option:
+
+@table @option
+@xopindex{hard-dereference, described}
+@item --hard-dereference
+Dereference hard links and store the files they refer to.
+@end table
-If a linked-to file is encountered again by @command{tar} while creating
-the same archive, an entire second copy of it will be stored. (This
-@emph{might} be considered a bug.)
+For example, trying this option on our two sample files, we get two
+copies in the archive, each of which can then be extracted
+independently of the other:
-So, for portable archives, do not archive symbolic links as such,
-and use @value{op-dereference}: many systems do not support
-symbolic links, and moreover, your distribution might be unusable if
-it contains unresolved symbolic links.
+@smallexample
+@group
+$ tar -c -vv -f ../archive.tar --hard-dereference .
+drwxr-xr-x gray/staff 0 2007-10-30 15:13 ./
+-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./jeden
+-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./one
+@end group
+@end smallexample
@node old
@subsection Old V7 Archives
@cindex Format, old style
@cindex Old style format
@cindex Old style archives
+@cindex v7 archive format
Certain old versions of @command{tar} cannot handle additional
information recorded by newer @command{tar} programs. To create an
archive in V7 format (not ANSI), which can be read by these old
-versions, specify the @value{op-format-v7} option in
-conjunction with the @value{op-create} (@command{tar} also
-accepts @option{--portability} or @samp{op-old-archive} for this
+versions, specify the @option{--format=v7} option in
+conjunction with the @option{--create} (@option{-c}) (@command{tar} also
+accepts @option{--portability} or @option{--old-archive} for this
option). When you specify it,
@command{tar} leaves out information about directories, pipes, fifos,
contiguous files, and device files, and specifies file ownership by
group and user IDs instead of group and user names.
-When updating an archive, do not use @value{op-format-v7}
+When updating an archive, do not use @option{--format=v7}
unless the archive was created using this option.
In most cases, a @emph{new} format archive can be read by an @emph{old}
@command{tar} program without serious trouble, so this option should
seldom be needed. On the other hand, most modern @command{tar}s are
able to read old format archives, so it might be safer for you to
-always use @value{op-format-v7} for your distributions.
+always use @option{--format=v7} for your distributions. Notice,
+however, that @samp{ustar} format is a better alternative, as it is
+free from many of @samp{v7}'s drawbacks.
@node ustar
@subsection Ustar Archive Format
+@cindex ustar archive format
Archive format defined by @acronym{POSIX}.1-1988 specification is called
@code{ustar}. Although it is more flexible than the V7 format, it
-still has many restrictions (@xref{Formats,ustar}, for the detailed
+still has many restrictions (@pxref{Formats,ustar}, for the detailed
description of @code{ustar} format). Along with V7 format,
@code{ustar} format is a good choice for archives intended to be read
with other implementations of @command{tar}.
-To create archive in @code{ustar} format, use @value{op-format-ustar}
-option in conjunction with the @value{op-create}.
+To create archive in @code{ustar} format, use @option{--format=ustar}
+option in conjunction with the @option{--create} (@option{-c}).
@node gnu
@subsection @acronym{GNU} and old @GNUTAR{} format
+@cindex GNU archive format
+@cindex Old GNU archive format
@GNUTAR{} was based on an early draft of the
@acronym{POSIX} 1003.1 @code{ustar} standard. @acronym{GNU} extensions to
@command{tar}, such as the support for file names longer than 100
@command{tar} programs that follow it.
In the majority of cases, @command{tar} will be configured to create
-this format by default. This will change in the future releases, since
-we plan to make @samp{posix} format the default.
+this format by default. This will change in future releases, since
+we plan to make @samp{POSIX} format the default.
To force creation a @GNUTAR{} archive, use option
-@value{op-format-gnu}.
+@option{--format=gnu}.
@node posix
@subsection @GNUTAR{} and @acronym{POSIX} @command{tar}
-The version @value{VERSION} of @GNUTAR{} is able
-to read and create archives conforming to @acronym{POSIX.1-2001} standard.
+@cindex POSIX archive format
+@cindex PAX archive format
+Starting from version 1.14 @GNUTAR{} features full support for
+@acronym{POSIX.1-2001} archives.
A @acronym{POSIX} conformant archive will be created if @command{tar}
-was given @value{op-format-posix} option.
+was given @option{--format=posix} (@option{--format=pax}) option. No
+special option is required to read and extract from a @acronym{POSIX}
+archive.
-@node Checksumming
-@subsection Checksumming Problems
+@menu
+* PAX keywords:: Controlling Extended Header Keywords.
+@end menu
-SunOS and HP-UX @command{tar} fail to accept archives created using
-@GNUTAR{} and containing non-ASCII file names, that
-is, file names having characters with the eight bit set, because they
-use signed checksums, while @GNUTAR{} uses unsigned
-checksums while creating archives, as per @acronym{POSIX} standards. On
-reading, @GNUTAR{} computes both checksums and
-accept any. It is somewhat worrying that a lot of people may go
-around doing backup of their files using faulty (or at least
-non-standard) software, not learning about it until it's time to
-restore their missing files with an incompatible file extractor, or
-vice versa.
+@node PAX keywords
+@subsubsection Controlling Extended Header Keywords
-@GNUTAR{} compute checksums both ways, and accept
-any on read, so @acronym{GNU} tar can read Sun tapes even with their
-wrong checksums. @GNUTAR{} produces the standard
-checksum, however, raising incompatibilities with Sun. That is to
-say, @GNUTAR{} has not been modified to
-@emph{produce} incorrect archives to be read by buggy @command{tar}'s.
-I've been told that more recent Sun @command{tar} now read standard
-archives, so maybe Sun did a similar patch, after all?
+@table @option
+@opindex pax-option
+@item --pax-option=@var{keyword-list}
+Handle keywords in @acronym{PAX} extended headers. This option is
+equivalent to @option{-o} option of the @command{pax} utility.
+@end table
-The story seems to be that when Sun first imported @command{tar}
-sources on their system, they recompiled it without realizing that
-the checksums were computed differently, because of a change in
-the default signing of @code{char}'s in their compiler. So they
-started computing checksums wrongly. When they later realized their
-mistake, they merely decided to stay compatible with it, and with
-themselves afterwards. Presumably, but I do not really know, HP-UX
-has chosen that their @command{tar} archives to be compatible with Sun's.
-The current standards do not favor Sun @command{tar} format. In any
-case, it now falls on the shoulders of SunOS and HP-UX users to get
-a @command{tar} able to read the good archives they receive.
+@var{Keyword-list} is a comma-separated
+list of keyword options, each keyword option taking one of
+the following forms:
-@node Large or Negative Values
-@subsection Large or Negative Values
-@cindex large values
-@cindex future time stamps
-@cindex negative time stamps
+@table @code
+@item delete=@var{pattern}
+When used with one of archive-creation commands,
+this option instructs @command{tar} to omit from extended header records
+that it produces any keywords matching the string @var{pattern}.
-@acronym{POSIX} @command{tar} format uses fixed-sized unsigned octal strings
-to represent numeric values. User and group IDs and device major and
-minor numbers have unsigned 21-bit representations, and file sizes and
-times have unsigned 33-bit representations. @GNUTAR{}
-generates @acronym{POSIX} representations when possible, but for values
-outside the @acronym{POSIX} range it generates two's-complement base-256
-strings: uids, gids, and device numbers have signed 57-bit
-representations, and file sizes and times have signed 89-bit
-representations. These representations are an extension to @acronym{POSIX}
-@command{tar} format, so they are not universally portable.
-
-The most common portability problems with out-of-range numeric values
-are large files and future or negative time stamps.
-
-Portable archives should avoid members of 8 GB or larger, as @acronym{POSIX}
-@command{tar} format cannot represent them.
-
-Portable archives should avoid time stamps from the future. @acronym{POSIX}
-@command{tar} format can represent time stamps in the range 1970-01-01
-00:00:00 through 2242-03-16 12:56:31 @sc{utc}. However, many current
-hosts use a signed 32-bit @code{time_t}, or internal time stamp format,
-and cannot represent time stamps after 2038-01-19 03:14:07 @sc{utc}; so
-portable archives must avoid these time stamps for many years to come.
-
-Portable archives should also avoid time stamps before 1970. These time
-stamps are a common @acronym{POSIX} extension but their @code{time_t}
-representations are negative. Many traditional @command{tar}
-implementations generate a two's complement representation for negative
-time stamps that assumes a signed 32-bit @code{time_t}; hence they
-generate archives that are not portable to hosts with differing
-@code{time_t} representations. @GNUTAR{} recognizes this
-situation when it is run on host with a signed 32-bit @code{time_t}, but
-it issues a warning, as these time stamps are nonstandard and unportable.
+When used in extract or list mode, this option instructs tar
+to ignore any keywords matching the given @var{pattern} in the extended
+header records. In both cases, matching is performed using the pattern
+matching notation described in @acronym{POSIX 1003.2}, 3.13
+(@pxref{wildcards}). For example:
-@node Compression
-@section Using Less Space through Compression
+@smallexample
+--pax-option delete=security.*
+@end smallexample
-@menu
-* gzip:: Creating and Reading Compressed Archives
-* sparse:: Archiving Sparse Files
-@end menu
+would suppress security-related information.
-@node gzip
-@subsection Creating and Reading Compressed Archives
-@cindex Compressed archives
-@cindex Storing archives in compressed format
+@item exthdr.name=@var{string}
-@GNUTAR{} is able to create and read compressed archives. It supports
-@command{gzip} and @command{bzip2} compression programs. For backward
-compatibilty, it also supports @command{compress} command, although
-we strongly recommend against using it, since there is a patent
-covering the algorithm it uses and you could be sued for patent
-infringement merely by running @command{compress}! Besides, it is less
-effective than @command{gzip} and @command{bzip2}.
+This keyword allows user control over the name that is written into the
+ustar header blocks for the extended headers. The name is obtained
+from @var{string} after making the following substitutions:
-Creating a compressed archive is simple: you just specify a
-@dfn{compression option} along with the usual archive creation
-commands. The compression option is @option{-z} (@option{--gzip}) to
-create a @command{gzip} compressed archive, @option{-j}
-(@option{--bzip2}) to create a @command{bzip2} compressed archive, and
-@option{-Z} (@option{--compress}) to use @command{compress} program.
-For example:
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %d @tab The directory name of the file, equivalent to the
+result of the @command{dirname} utility on the translated file name.
+@item %f @tab The name of the file with the directory information
+stripped, equivalent to the result of the @command{basename} utility
+on the translated file name.
+@item %p @tab The process @acronym{ID} of the @command{tar} process.
+@item %% @tab A @samp{%} character.
+@end multitable
-@smallexample
-$ @kbd{tar cfz archive.tar.gz .}
-@end smallexample
+Any other @samp{%} characters in @var{string} produce undefined
+results.
-Reading compressed archive is even simpler: you don't need to specify
-any additional options as @GNUTAR{} recognizes its format
-automatically. Thus, the following commands will list and extract the
-archive created in previous example:
+If no option @samp{exthdr.name=string} is specified, @command{tar}
+will use the following default value:
@smallexample
-# List the compressed archive
-$ @kbd{tar tf archive.tar.gz}
-# Extract the compressed archive
-$ @kbd{tar xf archive.tar.gz}
+%d/PaxHeaders.%p/%f
@end smallexample
-The only case when you have to specify a decompression option while
-reading the archive is when reading from a pipe or from a tape drive
-that does not support random access. However, in this case @GNUTAR{}
-will indicate which option you should use. For example:
+@item exthdr.mtime=@var{value}
-@smallexample
-$ @kbd{cat archive.tar.gz | tar tf -}
-tar: Archive is compressed. Use -z option
-tar: Error is not recoverable: exiting now
-@end smallexample
+This keyword defines the value of the @samp{mtime} field that
+is written into the ustar header blocks for the extended headers.
+By default, the @samp{mtime} field is set to the modification time
+of the archive member described by that extended headers.
-If you see such diagnostics, just add the suggested option to the
-invocation of @GNUTAR{}:
+@item globexthdr.name=@var{string}
+This keyword allows user control over the name that is written into
+the ustar header blocks for global extended header records. The name
+is obtained from the contents of @var{string}, after making
+the following substitutions:
+
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %n @tab An integer that represents the
+sequence number of the global extended header record in the archive,
+starting at 1.
+@item %p @tab The process @acronym{ID} of the @command{tar} process.
+@item %% @tab A @samp{%} character.
+@end multitable
+
+Any other @samp{%} characters in @var{string} produce undefined results.
+
+If no option @samp{globexthdr.name=string} is specified, @command{tar}
+will use the following default value:
@smallexample
-$ @kbd{cat archive.tar.gz | tar tfz -}
+$TMPDIR/GlobalHead.%p.%n
@end smallexample
-Notice also, that there are several restrictions on operations on
-compressed archives. First of all, compressed archives cannot be
-modified, i.e., you cannot update (@value{op-update}) them or delete
-(@value{op-delete}) members from them. Likewise, you cannot append
-another @command{tar} archive to a compressed archive using
-@value{op-append}). Secondly, multi-volume archives cannot be
-compressed.
+@noindent
+where @samp{$TMPDIR} represents the value of the @var{TMPDIR}
+environment variable. If @var{TMPDIR} is not set, @command{tar}
+uses @samp{/tmp}.
-The following table summarizes compression options used by @GNUTAR{}.
+@item globexthdr.mtime=@var{value}
-@table @option
-@item -z
-@itemx --gzip
-@itemx --ungzip
-Filter the archive through @command{gzip}.
+This keyword defines the value of the @samp{mtime} field that
+is written into the ustar header blocks for the global extended headers.
+By default, the @samp{mtime} field is set to the time when
+@command{tar} was invoked.
-You can use @option{--gzip} and @option{--gunzip} on physical devices
-(tape drives, etc.) and remote files as well as on normal files; data
-to or from such devices or remote files is reblocked by another copy
-of the @command{tar} program to enforce the specified (or default) record
-size. The default compression parameters are used; if you need to
-override them, set @env{GZIP} environment variable, e.g.:
+@item @var{keyword}=@var{value}
+When used with one of archive-creation commands, these keyword/value pairs
+will be included at the beginning of the archive in a global extended
+header record. When used with one of archive-reading commands,
+@command{tar} will behave as if it has encountered these keyword/value
+pairs at the beginning of the archive in a global extended header
+record.
-@smallexample
-$ @kbd{GZIP=--best tar cfz archive.tar.gz subdir}
-@end smallexample
+@item @var{keyword}:=@var{value}
+When used with one of archive-creation commands, these keyword/value pairs
+will be included as records at the beginning of an extended header for
+each file. This is effectively equivalent to @var{keyword}=@var{value}
+form except that it creates no global extended header records.
-@noindent
-Another way would be to avoid the @value{op-gzip} option and run
-@command{gzip} explicitly:
+When used with one of archive-reading commands, @command{tar} will
+behave as if these keyword/value pairs were included as records at the
+end of each extended header; thus, they will override any global or
+file-specific extended header record keywords of the same names.
+For example, in the command:
@smallexample
-$ @kbd{tar cf - subdir | gzip --best -c - > archive.tar.gz}
+tar --format=posix --create \
+ --file archive --pax-option gname:=user .
@end smallexample
-@cindex corrupted archives
-About corrupted compressed archives: @command{gzip}'ed files have no
-redundancy, for maximum compression. The adaptive nature of the
-compression scheme means that the compression tables are implicitly
-spread all over the archive. If you lose a few blocks, the dynamic
-construction of the compression tables becomes unsynchronized, and there
-is little chance that you could recover later in the archive.
+the group name will be forced to a new value for all files
+stored in the archive.
+@end table
-There are pending suggestions for having a per-volume or per-file
-compression in @GNUTAR{}. This would allow for viewing the
-contents without decompression, and for resynchronizing decompression at
-every volume or file, in case of corrupted archives. Doing so, we might
-lose some compressibility. But this would have make recovering easier.
-So, there are pros and cons. We'll see!
+In any of the forms described above, the @var{value} may be
+a string enclosed in curly braces. In that case, the string
+between the braces is understood either as a textual time
+representation, as described in @ref{Date input formats}, or a name of
+the existing file, starting with @samp{/} or @samp{.}. In the latter
+case, the modification time of that file is used.
-@item -j
-@itemx --bzip2
-Filter the archive through @code{bzip2}. Otherwise like @value{op-gzip}.
+For example, to set all modification times to the current date, you
+use the following option:
-@item -Z
-@itemx --compress
-@itemx --uncompress
-Filter the archive through @command{compress}. Otherwise like
-@value{op-gzip}.
+@smallexample
+--pax-option='mtime:=@{now@}'
+@end smallexample
-The @acronym{GNU} Project recommends you not use
-@command{compress}, because there is a patent covering the algorithm it
-uses. You could be sued for patent infringement merely by running
-@command{compress}.
+Note quoting of the option's argument.
-@item --use-compress-program=@var{prog}
-Use external compression program @var{prog}. Use this option if you
-have a compression program that @GNUTAR{} does not support. There
-are two requirements to which @var{prog} should comply:
+@cindex archives, binary equivalent
+@cindex binary equivalent archives, creating
+As another example, here is the option that ensures that any two
+archives created using it, will be binary equivalent if they have the
+same contents:
-First, when called without options, it should read data from standard
-input, compress it and output it on standard output.
+@smallexample
+--pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0
+@end smallexample
-Secondly, if called with @option{-d} argument, it should do exactly
-the opposite, i.e., read the compressed data from the standard input
-and produce uncompressed data on the standard output.
-@end table
+@node Checksumming
+@subsection Checksumming Problems
+
+SunOS and HP-UX @command{tar} fail to accept archives created using
+@GNUTAR{} and containing non-@acronym{ASCII} file names, that
+is, file names having characters with the eight bit set, because they
+use signed checksums, while @GNUTAR{} uses unsigned
+checksums while creating archives, as per @acronym{POSIX} standards. On
+reading, @GNUTAR{} computes both checksums and
+accepts any. It is somewhat worrying that a lot of people may go
+around doing backup of their files using faulty (or at least
+non-standard) software, not learning about it until it's time to
+restore their missing files with an incompatible file extractor, or
+vice versa.
-@FIXME{I have one question, or maybe it's a suggestion if there isn't a way
-to do it now. I would like to use @value{op-gzip}, but I'd also like
-the output to be fed through a program like @acronym{GNU}
-@command{ecc} (actually, right now that's @samp{exactly} what I'd like
-to use :-)), basically adding ECC protection on top of compression.
-It seems as if this should be quite easy to do, but I can't work out
-exactly how to go about it. Of course, I can pipe the standard output
-of @command{tar} through @command{ecc}, but then I lose (though I
-haven't started using it yet, I confess) the ability to have
-@command{tar} use @command{rmt} for it's I/O (I think).
-
-I think the most straightforward thing would be to let me specify a
-general set of filters outboard of compression (preferably ordered,
-so the order can be automatically reversed on input operations, and
-with the options they require specifiable), but beggars shouldn't be
-choosers and anything you decide on would be fine with me.
-
-By the way, I like @command{ecc} but if (as the comments say) it can't
-deal with loss of block sync, I'm tempted to throw some time at adding
-that capability. Supposing I were to actually do such a thing and
-get it (apparently) working, do you accept contributed changes to
-utilities like that? (Leigh Clayton @file{loc@@soliton.com}, May 1995).
-
-Isn't that exactly the role of the @value{op-use-compress-prog} option?
-I never tried it myself, but I suspect you may want to write a
-@var{prog} script or program able to filter stdin to stdout to
-way you want. It should recognize the @option{-d} option, for when
-extraction is needed rather than creation.
-
-It has been reported that if one writes compressed data (through the
-@value{op-gzip} or @value{op-compress} options) to a DLT and tries to use
-the DLT compression mode, the data will actually get bigger and one will
-end up with less space on the tape.}
+@GNUTAR{} computes checksums both ways, and accept
+any on read, so @acronym{GNU} tar can read Sun tapes even with their
+wrong checksums. @GNUTAR{} produces the standard
+checksum, however, raising incompatibilities with Sun. That is to
+say, @GNUTAR{} has not been modified to
+@emph{produce} incorrect archives to be read by buggy @command{tar}'s.
+I've been told that more recent Sun @command{tar} now read standard
+archives, so maybe Sun did a similar patch, after all?
-@node sparse
-@subsection Archiving Sparse Files
-@cindex Sparse Files
-@UNREVISED
+The story seems to be that when Sun first imported @command{tar}
+sources on their system, they recompiled it without realizing that
+the checksums were computed differently, because of a change in
+the default signing of @code{char}'s in their compiler. So they
+started computing checksums wrongly. When they later realized their
+mistake, they merely decided to stay compatible with it, and with
+themselves afterwards. Presumably, but I do not really know, HP-UX
+has chosen that their @command{tar} archives to be compatible with Sun's.
+The current standards do not favor Sun @command{tar} format. In any
+case, it now falls on the shoulders of SunOS and HP-UX users to get
+a @command{tar} able to read the good archives they receive.
-@table @option
-@item -S
-@itemx --sparse
-Handle sparse files efficiently.
-@end table
+@node Large or Negative Values
+@subsection Large or Negative Values
+@cindex large values
+@cindex future time stamps
+@cindex negative time stamps
+@UNREVISED
-This option causes all files to be put in the archive to be tested for
-sparseness, and handled specially if they are. The @value{op-sparse}
-option is useful when many @code{dbm} files, for example, are being
-backed up. Using this option dramatically decreases the amount of
-space needed to store such a file.
+The above sections suggest to use @samp{oldest possible} archive
+format if in doubt. However, sometimes it is not possible. If you
+attempt to archive a file whose metadata cannot be represented using
+required format, @GNUTAR{} will print error message and ignore such a
+file. You will than have to switch to a format that is able to
+handle such values. The format summary table (@pxref{Formats}) will
+help you to do so.
+
+In particular, when trying to archive files larger than 8GB or with
+timestamps not in the range 1970-01-01 00:00:00 through 2242-03-16
+12:56:31 @sc{utc}, you will have to chose between @acronym{GNU} and
+@acronym{POSIX} archive formats. When considering which format to
+choose, bear in mind that the @acronym{GNU} format uses
+two's-complement base-256 notation to store values that do not fit
+into standard @acronym{ustar} range. Such archives can generally be
+read only by a @GNUTAR{} implementation. Moreover, they sometimes
+cannot be correctly restored on another hosts even by @GNUTAR{}. For
+example, using two's complement representation for negative time
+stamps that assumes a signed 32-bit @code{time_t} generates archives
+that are not portable to hosts with differing @code{time_t}
+representations.
+
+On the other hand, @acronym{POSIX} archives, generally speaking, can
+be extracted by any tar implementation that understands older
+@acronym{ustar} format. The only exception are files larger than 8GB.
+
+@FIXME{Describe how @acronym{POSIX} archives are extracted by non
+POSIX-aware tars.}
+
+@node Other Tars
+@subsection How to Extract GNU-Specific Data Using Other @command{tar} Implementations
+
+In previous sections you became acquainted with various quirks
+necessary to make your archives portable. Sometimes you may need to
+extract archives containing GNU-specific members using some
+third-party @command{tar} implementation or an older version of
+@GNUTAR{}. Of course your best bet is to have @GNUTAR{} installed,
+but if it is for some reason impossible, this section will explain
+how to cope without it.
+
+When we speak about @dfn{GNU-specific} members we mean two classes of
+them: members split between the volumes of a multi-volume archive and
+sparse members. You will be able to always recover such members if
+the archive is in PAX format. In addition split members can be
+recovered from archives in old GNU format. The following subsections
+describe the required procedures in detail.
-In later versions, this option may be removed, and the testing and
-treatment of sparse files may be done automatically with any special
-@acronym{GNU} options. For now, it is an option needing to be specified on
-the command line with the creation or updating of an archive.
+@menu
+* Split Recovery:: Members Split Between Volumes
+* Sparse Recovery:: Sparse Members
+@end menu
-Files in the file system occasionally have ``holes.'' A hole in a file
-is a section of the file's contents which was never written. The
-contents of a hole read as all zeros. On many operating systems,
-actual disk storage is not allocated for holes, but they are counted
-in the length of the file. If you archive such a file, @command{tar}
-could create an archive longer than the original. To have @command{tar}
-attempt to recognize the holes in a file, use @value{op-sparse}. When
-you use the @value{op-sparse} option, then, for any file using less
-disk space than would be expected from its length, @command{tar} searches
-the file for consecutive stretches of zeros. It then records in the
-archive for the file where the consecutive stretches of zeros are, and
-only archives the ``real contents'' of the file. On extraction (using
-@value{op-sparse} is not needed on extraction) any such files have
-holes created wherever the continuous stretches of zeros were found.
-Thus, if you use @value{op-sparse}, @command{tar} archives won't take
-more space than the original.
-
-A file is sparse if it contains blocks of zeros whose existence is
-recorded, but that have no space allocated on disk. When you specify
-the @value{op-sparse} option in conjunction with the @value{op-create}
-operation, @command{tar} tests all files for sparseness while archiving.
-If @command{tar} finds a file to be sparse, it uses a sparse representation of
-the file in the archive. @value{xref-create}, for more information
-about creating archives.
-
-@value{op-sparse} is useful when archiving files, such as dbm files,
-likely to contain many nulls. This option dramatically
-decreases the amount of space needed to store such an archive.
+@node Split Recovery
+@subsubsection Extracting Members Split Between Volumes
-@quotation
-@strong{Please Note:} Always use @value{op-sparse} when performing file
-system backups, to avoid archiving the expanded forms of files stored
-sparsely in the system.
+@cindex Mutli-volume archives, extracting using non-GNU tars
+If a member is split between several volumes of an old GNU format archive
+most third party @command{tar} implementation will fail to extract
+it. To extract it, use @command{tarcat} program (@pxref{Tarcat}).
+This program is available from
+@uref{http://www.gnu.org/@/software/@/tar/@/utils/@/tarcat.html, @GNUTAR{}
+home page}. It concatenates several archive volumes into a single
+valid archive. For example, if you have three volumes named from
+@file{vol-1.tar} to @file{vol-3.tar}, you can do the following to
+extract them using a third-party @command{tar}:
-Even if your system has no sparse files currently, some may be
-created in the future. If you use @value{op-sparse} while making file
-system backups as a matter of course, you can be assured the archive
-will never take more space on the media than the files take on disk
-(otherwise, archiving a disk filled with sparse files might take
-hundreds of tapes). @FIXME-xref{incremental when node name is set.}
-@end quotation
+@smallexample
+$ @kbd{tarcat vol-1.tar vol-2.tar vol-3.tar | tar xf -}
+@end smallexample
-@command{tar} ignores the @value{op-sparse} option when reading an archive.
+@cindex Mutli-volume archives in PAX format, extracting using non-GNU tars
+You could use this approach for most (although not all) PAX
+format archives as well. However, extracting split members from a PAX
+archive is a much easier task, because PAX volumes are constructed in
+such a way that each part of a split member is extracted to a
+different file by @command{tar} implementations that are not aware of
+GNU extensions. More specifically, the very first part retains its
+original name, and all subsequent parts are named using the pattern:
-@table @option
-@item --sparse
-@itemx -S
-Files stored sparsely in the file system are represented sparsely in
-the archive. Use in conjunction with write operations.
-@end table
+@smallexample
+%d/GNUFileParts.%p/%f.%n
+@end smallexample
-However, users should be well aware that at archive creation time,
-@GNUTAR{} still has to read whole disk file to
-locate the @dfn{holes}, and so, even if sparse files use little space
-on disk and in the archive, they may sometimes require inordinate
-amount of time for reading and examining all-zero blocks of a file.
-Although it works, it's painfully slow for a large (sparse) file, even
-though the resulting tar archive may be small. (One user reports that
-dumping a @file{core} file of over 400 megabytes, but with only about
-3 megabytes of actual data, took about 9 minutes on a Sun Sparcstation
-ELC, with full CPU utilization.)
-
-This reading is required in all cases and is not related to the fact
-the @value{op-sparse} option is used or not, so by merely @emph{not}
-using the option, you are not saving time@footnote{Well! We should say
-the whole truth, here. When @value{op-sparse} is selected while creating
-an archive, the current @command{tar} algorithm requires sparse files to be
-read twice, not once. We hope to develop a new archive format for saving
-sparse files in which one pass will be sufficient.}.
+@noindent
+where symbols preceeded by @samp{%} are @dfn{macro characters} that
+have the following meaning:
-Programs like @command{dump} do not have to read the entire file; by
-examining the file system directly, they can determine in advance
-exactly where the holes are and thus avoid reading through them. The
-only data it need read are the actual allocated data blocks.
-@GNUTAR{} uses a more portable and straightforward
-archiving approach, it would be fairly difficult that it does
-otherwise. Elizabeth Zwicky writes to @file{comp.unix.internals}, on
-1990-12-10:
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %d @tab The directory name of the file, equivalent to the
+result of the @command{dirname} utility on its full name.
+@item %f @tab The file name of the file, equivalent to the result
+of the @command{basename} utility on its full name.
+@item %p @tab The process @acronym{ID} of the @command{tar} process that
+created the archive.
+@item %n @tab Ordinal number of this particular part.
+@end multitable
-@quotation
-What I did say is that you cannot tell the difference between a hole and an
-equivalent number of nulls without reading raw blocks. @code{st_blocks} at
-best tells you how many holes there are; it doesn't tell you @emph{where}.
-Just as programs may, conceivably, care what @code{st_blocks} is (care
-to name one that does?), they may also care where the holes are (I have
-no examples of this one either, but it's equally imaginable).
+For example, if the file @file{var/longfile} was split during archive
+creation between three volumes, and the creator @command{tar} process
+had process @acronym{ID} @samp{27962}, then the member names will be:
-I conclude from this that good archivers are not portable. One can
-arguably conclude that if you want a portable program, you can in good
-conscience restore files with as many holes as possible, since you can't
-get it right.
-@end quotation
+@smallexample
+var/longfile
+var/GNUFileParts.27962/longfile.1
+var/GNUFileParts.27962/longfile.2
+@end smallexample
-@node Attributes
-@section Handling File Attributes
-@UNREVISED
+When you extract your archive using a third-party @command{tar}, these
+files will be created on your disk, and the only thing you will need
+to do to restore your file in its original form is concatenate them in
+the proper order, for example:
-When @command{tar} reads files, it updates their access times. To
-avoid this, use the @value{op-atime-preserve} option, which can either
-reset the access time retroactively or avoid changing it in the first
-place.
+@smallexample
+@group
+$ @kbd{cd var}
+$ @kbd{cat GNUFileParts.27962/longfile.1 \
+ GNUFileParts.27962/longfile.2 >> longfile}
+$ rm -f GNUFileParts.27962
+@end group
+@end smallexample
-Handling of file attributes
+Notice, that if the @command{tar} implementation you use supports PAX
+format archives, it will probably emit warnings about unknown keywords
+during extraction. They will look like this:
-@table @option
-@item --atime-preserve
-@itemx --atime-preserve=replace
-@itemx --atime-preserve=system
-Preserve the access times of files that are read. This works only for
-files that you own, unless you have superuser privileges.
+@smallexample
+@group
+Tar file too small
+Unknown extended header keyword 'GNU.volume.filename' ignored.
+Unknown extended header keyword 'GNU.volume.size' ignored.
+Unknown extended header keyword 'GNU.volume.offset' ignored.
+@end group
+@end smallexample
-@value{op-atime-preserve-replace} works on most systems, but it also
-restores the data modification time and updates the status change
-time. Hence it doesn't interact with incremental dumps nicely
-(@pxref{Backups}), and it can set access or data modification times
-incorrectly if other programs access the file while @command{tar} is
-running.
+@noindent
+You can safely ignore these warnings.
-@value{op-atime-preserve-system} avoids changing the access time in
-the first place, if the operating system supports this.
-Unfortunately, this may or may not work on any given operating system
-or file system. If @command{tar} knows for sure it won't work, it
-complains right away.
+If your @command{tar} implementation is not PAX-aware, you will get
+more warnings and more files generated on your disk, e.g.:
-Currently @option{--atime-preserve} with no operand defaults to
-@value{op-atime-preserve-replace}, but this is intended to change to
-@value{op-atime-preserve-system} when the latter is better-supported.
+@smallexample
+@group
+$ @kbd{tar xf vol-1.tar}
+var/PaxHeaders.27962/longfile: Unknown file type 'x', extracted as
+normal file
+Unexpected EOF in archive
+$ @kbd{tar xf vol-2.tar}
+tmp/GlobalHead.27962.1: Unknown file type 'g', extracted as normal file
+GNUFileParts.27962/PaxHeaders.27962/sparsefile.1: Unknown file type
+'x', extracted as normal file
+@end group
+@end smallexample
-@item -m
-@itemx --touch
-Do not extract data modification time.
+Ignore these warnings. The @file{PaxHeaders.*} directories created
+will contain files with @dfn{extended header keywords} describing the
+extracted files. You can delete them, unless they describe sparse
+members. Read further to learn more about them.
-When this option is used, @command{tar} leaves the data modification times
-of the files it extracts as the times when the files were extracted,
-instead of setting it to the times recorded in the archive.
+@node Sparse Recovery
+@subsubsection Extracting Sparse Members
-This option is meaningless with @value{op-list}.
+@cindex sparse files, extracting with non-GNU tars
+Any @command{tar} implementation will be able to extract sparse members from a
+PAX archive. However, the extracted files will be @dfn{condensed},
+i.e., any zero blocks will be removed from them. When we restore such
+a condensed file to its original form, by adding zero blocks (or
+@dfn{holes}) back to their original locations, we call this process
+@dfn{expanding} a compressed sparse file.
-@item --same-owner
-Create extracted files with the same ownership they have in the
-archive.
+@pindex xsparse
+To expand a file, you will need a simple auxiliary program called
+@command{xsparse}. It is available in source form from
+@uref{http://www.gnu.org/@/software/@/tar/@/utils/@/xsparse.html, @GNUTAR{}
+home page}.
-This is the default behavior for the superuser,
-so this option is meaningful only for non-root users, when @command{tar}
-is executed on those systems able to give files away. This is
-considered as a security flaw by many people, at least because it
-makes quite difficult to correctly account users for the disk space
-they occupy. Also, the @code{suid} or @code{sgid} attributes of
-files are easily and silently lost when files are given away.
+@cindex sparse files v.1.0, extracting with non-GNU tars
+Let's begin with archive members in @dfn{sparse format
+version 1.0}@footnote{@xref{PAX 1}.}, which are the easiest to expand.
+The condensed file will contain both file map and file data, so no
+additional data will be needed to restore it. If the original file
+name was @file{@var{dir}/@var{name}}, then the condensed file will be
+named @file{@var{dir}/@/GNUSparseFile.@var{n}/@/@var{name}}, where
+@var{n} is a decimal number@footnote{Technically speaking, @var{n} is a
+@dfn{process @acronym{ID}} of the @command{tar} process which created the
+archive (@pxref{PAX keywords}).}.
-When writing an archive, @command{tar} writes the user id and user name
-separately. If it can't find a user name (because the user id is not
-in @file{/etc/passwd}), then it does not write one. When restoring,
-and doing a @code{chmod} like when you use @value{op-same-permissions},
-@FIXME{same-owner?}it tries to look the name (if one was written)
-up in @file{/etc/passwd}. If it fails, then it uses the user id
-stored in the archive instead.
+To expand a version 1.0 file, run @command{xsparse} as follows:
-@item --no-same-owner
-@itemx -o
-Do not attempt to restore ownership when extracting. This is the
-default behavior for ordinary users, so this option has an effect
-only for the superuser.
+@smallexample
+$ @kbd{xsparse @file{cond-file}}
+@end smallexample
-@item --numeric-owner
-The @value{op-numeric-owner} option allows (ANSI) archives to be written
-without user/group name information or such information to be ignored
-when extracting. It effectively disables the generation and/or use
-of user/group name information. This option forces extraction using
-the numeric ids from the archive, ignoring the names.
+@noindent
+where @file{cond-file} is the name of the condensed file. The utility
+will deduce the name for the resulting expanded file using the
+following algorithm:
+
+@enumerate 1
+@item If @file{cond-file} does not contain any directories,
+@file{../cond-file} will be used;
+
+@item If @file{cond-file} has the form
+@file{@var{dir}/@var{t}/@var{name}}, where both @var{t} and @var{name}
+are simple names, with no @samp{/} characters in them, the output file
+name will be @file{@var{dir}/@var{name}}.
+
+@item Otherwise, if @file{cond-file} has the form
+@file{@var{dir}/@var{name}}, the output file name will be
+@file{@var{name}}.
+@end enumerate
-This is useful in certain circumstances, when restoring a backup from
-an emergency floppy with different passwd/group files for example.
-It is otherwise impossible to extract files with the right ownerships
-if the password file in use during the extraction does not match the
-one belonging to the file system(s) being extracted. This occurs,
-for example, if you are restoring your files after a major crash and
-had booted from an emergency floppy with no password file or put your
-disk into another machine to do the restore.
+In the unlikely case when this algorithm does not suit your needs,
+you can explicitly specify output file name as a second argument to
+the command:
-The numeric ids are @emph{always} saved into @command{tar} archives.
-The identifying names are added at create time when provided by the
-system, unless @value{op-old-archive} is used. Numeric ids could be
-used when moving archives between a collection of machines using
-a centralized management for attribution of numeric ids to users
-and groups. This is often made through using the NIS capabilities.
+@smallexample
+$ @kbd{xsparse @file{cond-file} @file{out-file}}
+@end smallexample
-When making a @command{tar} file for distribution to other sites, it
-is sometimes cleaner to use a single owner for all files in the
-distribution, and nicer to specify the write permission bits of the
-files as stored in the archive independently of their actual value on
-the file system. The way to prepare a clean distribution is usually
-to have some Makefile rule creating a directory, copying all needed
-files in that directory, then setting ownership and permissions as
-wanted (there are a lot of possible schemes), and only then making a
-@command{tar} archive out of this directory, before cleaning
-everything out. Of course, we could add a lot of options to
-@GNUTAR{} for fine tuning permissions and ownership.
-This is not the good way, I think. @GNUTAR{} is
-already crowded with options and moreover, the approach just explained
-gives you a great deal of control already.
+It is often a good idea to run @command{xsparse} in @dfn{dry run} mode
+first. In this mode, the command does not actually expand the file,
+but verbosely lists all actions it would be taking to do so. The dry
+run mode is enabled by @option{-n} command line argument:
-@item -p
-@itemx --same-permissions
-@itemx --preserve-permissions
-Extract all protection information.
+@smallexample
+@group
+$ @kbd{xsparse -n /home/gray/GNUSparseFile.6058/sparsefile}
+Reading v.1.0 sparse map
+Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
+`/home/gray/sparsefile'
+Finished dry run
+@end group
+@end smallexample
-This option causes @command{tar} to set the modes (access permissions) of
-extracted files exactly as recorded in the archive. If this option
-is not used, the current @code{umask} setting limits the permissions
-on extracted files. This option is by default enabled when
-@command{tar} is executed by a superuser.
+To actually expand the file, you would run:
+@smallexample
+$ @kbd{xsparse /home/gray/GNUSparseFile.6058/sparsefile}
+@end smallexample
-This option is meaningless with @value{op-list}.
+@noindent
+The program behaves the same way all UNIX utilities do: it will keep
+quiet unless it has simething important to tell you (e.g. an error
+condition or something). If you wish it to produce verbose output,
+similar to that from the dry run mode, use @option{-v} option:
-@item --preserve
-Same as both @value{op-same-permissions} and @value{op-same-order}.
+@smallexample
+@group
+$ @kbd{xsparse -v /home/gray/GNUSparseFile.6058/sparsefile}
+Reading v.1.0 sparse map
+Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
+`/home/gray/sparsefile'
+Done
+@end group
+@end smallexample
-The @value{op-preserve} option has no equivalent short option name.
-It is equivalent to @value{op-same-permissions} plus @value{op-same-order}.
+Additionally, if your @command{tar} implementation has extracted the
+@dfn{extended headers} for this file, you can instruct @command{xstar}
+to use them in order to verify the integrity of the expanded file.
+The option @option{-x} sets the name of the extended header file to
+use. Continuing our example:
-@FIXME{I do not see the purpose of such an option. (Neither I. FP.)}
+@smallexample
+@group
+$ @kbd{xsparse -v -x /home/gray/PaxHeaders.6058/sparsefile \
+ /home/gray/GNUSparseFile.6058/sparsefile}
+Reading extended header file
+Found variable GNU.sparse.major = 1
+Found variable GNU.sparse.minor = 0
+Found variable GNU.sparse.name = sparsefile
+Found variable GNU.sparse.realsize = 217481216
+Reading v.1.0 sparse map
+Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
+`/home/gray/sparsefile'
+Done
+@end group
+@end smallexample
-@end table
+@anchor{extracting sparse v.0.x}
+@cindex sparse files v.0.1, extracting with non-GNU tars
+@cindex sparse files v.0.0, extracting with non-GNU tars
+An @dfn{extended header} is a special @command{tar} archive header
+that precedes an archive member and contains a set of
+@dfn{variables}, describing the member properties that cannot be
+stored in the standard @code{ustar} header. While optional for
+expanding sparse version 1.0 members, the use of extended headers is
+mandatory when expanding sparse members in older sparse formats: v.0.0
+and v.0.1 (The sparse formats are described in detail in @ref{Sparse
+Formats}.) So, for these formats, the question is: how to obtain
+extended headers from the archive?
+
+If you use a @command{tar} implementation that does not support PAX
+format, extended headers for each member will be extracted as a
+separate file. If we represent the member name as
+@file{@var{dir}/@var{name}}, then the extended header file will be
+named @file{@var{dir}/@/PaxHeaders.@var{n}/@/@var{name}}, where
+@var{n} is an integer number.
+
+Things become more difficult if your @command{tar} implementation
+does support PAX headers, because in this case you will have to
+manually extract the headers. We recommend the following algorithm:
+
+@enumerate 1
+@item
+Consult the documentation of your @command{tar} implementation for an
+option that prints @dfn{block numbers} along with the archive
+listing (analogous to @GNUTAR{}'s @option{-R} option). For example,
+@command{star} has @option{-block-number}.
-@node Standard
-@section Basic Tar Format
-@UNREVISED
+@item
+Obtain verbose listing using the @samp{block number} option, and
+find block numbers of the sparse member in question and the member
+immediately following it. For example, running @command{star} on our
+archive we obtain:
-While an archive may contain many files, the archive itself is a
-single ordinary file. Like any other file, an archive file can be
-written to a storage device such as a tape or disk, sent through a
-pipe or over a network, saved on the active file system, or even
-stored in another archive. An archive file is not easy to read or
-manipulate without using the @command{tar} utility or Tar mode in
-@acronym{GNU} Emacs.
-
-Physically, an archive consists of a series of file entries terminated
-by an end-of-archive entry, which consists of two 512 blocks of zero
-bytes. A file
-entry usually describes one of the files in the archive (an
-@dfn{archive member}), and consists of a file header and the contents
-of the file. File headers contain file names and statistics, checksum
-information which @command{tar} uses to detect file corruption, and
-information about file types.
-
-Archives are permitted to have more than one member with the same
-member name. One way this situation can occur is if more than one
-version of a file has been stored in the archive. For information
-about adding new versions of a file to an archive, see @ref{update}.
-@FIXME-xref{To learn more about having more than one archive member with the
-same name, see -backup node, when it's written.}
-
-In addition to entries describing archive members, an archive may
-contain entries which @command{tar} itself uses to store information.
-@value{xref-label}, for an example of such an archive entry.
-
-A @command{tar} archive file contains a series of blocks. Each block
-contains @code{BLOCKSIZE} bytes. Although this format may be thought
-of as being on magnetic tape, other media are often used.
-
-Each file archived is represented by a header block which describes
-the file, followed by zero or more blocks which give the contents
-of the file. At the end of the archive file there are two 512-byte blocks
-filled with binary zeros as an end-of-file marker. A reasonable system
-should write such end-of-file marker at the end of an archive, but
-must not assume that such a block exists when reading an archive. In
-particular @GNUTAR{} always issues a warning if it does not encounter it.
-
-The blocks may be @dfn{blocked} for physical I/O operations.
-Each record of @var{n} blocks (where @var{n} is set by the
-@value{op-blocking-factor} option to @command{tar}) is written with a single
-@w{@samp{write ()}} operation. On magnetic tapes, the result of
-such a write is a single record. When writing an archive,
-the last record of blocks should be written at the full size, with
-blocks after the zero block containing all zeros. When reading
-an archive, a reasonable system should properly handle an archive
-whose last record is shorter than the rest, or which contains garbage
-records after a zero block.
-
-The header block is defined in C as follows. In the @GNUTAR{}
-distribution, this is part of file @file{src/tar.h}:
-
-@smallexample
-@include header.texi
-@end smallexample
-
-All characters in header blocks are represented by using 8-bit
-characters in the local variant of ASCII. Each field within the
-structure is contiguous; that is, there is no padding used within
-the structure. Each character on the archive medium is stored
-contiguously.
-
-Bytes representing the contents of files (after the header block
-of each file) are not translated in any way and are not constrained
-to represent characters in any character set. The @command{tar} format
-does not distinguish text files from binary files, and no translation
-of file contents is performed.
-
-The @code{name}, @code{linkname}, @code{magic}, @code{uname}, and
-@code{gname} are null-terminated character strings. All other fields
-are zero-filled octal numbers in ASCII. Each numeric field of width
-@var{w} contains @var{w} minus 1 digits, and a null.
-
-The @code{name} field is the file name of the file, with directory names
-(if any) preceding the file name, separated by slashes.
-
-@FIXME{how big a name before field overflows?}
-
-The @code{mode} field provides nine bits specifying file permissions
-and three bits to specify the Set UID, Set GID, and Save Text
-(@dfn{sticky}) modes. Values for these bits are defined above.
-When special permissions are required to create a file with a given
-mode, and the user restoring files from the archive does not hold such
-permissions, the mode bit(s) specifying those special permissions
-are ignored. Modes which are not supported by the operating system
-restoring files from the archive will be ignored. Unsupported modes
-should be faked up when creating or updating an archive; e.g., the
-group permission could be copied from the @emph{other} permission.
-
-The @code{uid} and @code{gid} fields are the numeric user and group
-ID of the file owners, respectively. If the operating system does
-not support numeric user or group IDs, these fields should be ignored.
-
-The @code{size} field is the size of the file in bytes; linked files
-are archived with this field specified as zero. @FIXME-xref{Modifiers, in
-particular the @value{op-incremental} option.}
-
-The @code{mtime} field is the data modification time of the file at
-the time it was archived. It is the ASCII representation of the octal
-value of the last time the file's contents were modified, represented
-as an integer number of
-seconds since January 1, 1970, 00:00 Coordinated Universal Time.
-
-The @code{chksum} field is the ASCII representation of the octal value
-of the simple sum of all bytes in the header block. Each 8-bit
-byte in the header is added to an unsigned integer, initialized to
-zero, the precision of which shall be no less than seventeen bits.
-When calculating the checksum, the @code{chksum} field is treated as
-if it were all blanks.
-
-The @code{typeflag} field specifies the type of file archived. If a
-particular implementation does not recognize or permit the specified
-type, the file will be extracted as if it were a regular file. As this
-action occurs, @command{tar} issues a warning to the standard error.
-
-The @code{atime} and @code{ctime} fields are used in making incremental
-backups; they store, respectively, the particular file's access and
-status change times.
-
-The @code{offset} is used by the @value{op-multi-volume} option, when
-making a multi-volume archive. The offset is number of bytes into
-the file that we need to restart at to continue the file on the next
-tape, i.e., where we store the location that a continued file is
-continued at.
-
-The following fields were added to deal with sparse files. A file
-is @dfn{sparse} if it takes in unallocated blocks which end up being
-represented as zeros, i.e., no useful data. A test to see if a file
-is sparse is to look at the number blocks allocated for it versus the
-number of characters in the file; if there are fewer blocks allocated
-for the file than would normally be allocated for a file of that
-size, then the file is sparse. This is the method @command{tar} uses to
-detect a sparse file, and once such a file is detected, it is treated
-differently from non-sparse files.
-
-Sparse files are often @code{dbm} files, or other database-type files
-which have data at some points and emptiness in the greater part of
-the file. Such files can appear to be very large when an @samp{ls
--l} is done on them, when in truth, there may be a very small amount
-of important data contained in the file. It is thus undesirable
-to have @command{tar} think that it must back up this entire file, as
-great quantities of room are wasted on empty blocks, which can lead
-to running out of room on a tape far earlier than is necessary.
-Thus, sparse files are dealt with so that these empty blocks are
-not written to the tape. Instead, what is written to the tape is a
-description, of sorts, of the sparse file: where the holes are, how
-big the holes are, and how much data is found at the end of the hole.
-This way, the file takes up potentially far less room on the tape,
-and when the file is extracted later on, it will look exactly the way
-it looked beforehand. The following is a description of the fields
-used to handle a sparse file:
-
-The @code{sp} is an array of @code{struct sparse}. Each @code{struct
-sparse} contains two 12-character strings which represent an offset
-into the file and a number of bytes to be written at that offset.
-The offset is absolute, and not relative to the offset in preceding
-array element.
-
-The header can hold four of these @code{struct sparse} at the moment;
-if more are needed, they are not stored in the header.
-
-The @code{isextended} flag is set when an @code{extended_header}
-is needed to deal with a file. Note that this means that this flag
-can only be set when dealing with a sparse file, and it is only set
-in the event that the description of the file will not fit in the
-allotted room for sparse structures in the header. In other words,
-an extended_header is needed.
-
-The @code{extended_header} structure is used for sparse files which
-need more sparse structures than can fit in the header. The header can
-fit 4 such structures; if more are needed, the flag @code{isextended}
-gets set and the next block is an @code{extended_header}.
-
-Each @code{extended_header} structure contains an array of 21
-sparse structures, along with a similar @code{isextended} flag
-that the header had. There can be an indeterminate number of such
-@code{extended_header}s to describe a sparse file.
+@smallexample
+@group
+$ @kbd{star -t -v -block-number -f arc.tar}
+@dots{}
+star: Unknown extended header keyword 'GNU.sparse.size' ignored.
+star: Unknown extended header keyword 'GNU.sparse.numblocks' ignored.
+star: Unknown extended header keyword 'GNU.sparse.name' ignored.
+star: Unknown extended header keyword 'GNU.sparse.map' ignored.
+block 56: 425984 -rw-r--r-- gray/users Jun 25 14:46 2006 GNUSparseFile.28124/sparsefile
+block 897: 65391 -rw-r--r-- gray/users Jun 24 20:06 2006 README
+@dots{}
+@end group
+@end smallexample
-@table @asis
+@noindent
+(as usual, ignore the warnings about unknown keywords.)
-@item @code{REGTYPE}
-@itemx @code{AREGTYPE}
-These flags represent a regular file. In order to be compatible
-with older versions of @command{tar}, a @code{typeflag} value of
-@code{AREGTYPE} should be silently recognized as a regular file.
-New archives should be created using @code{REGTYPE}. Also, for
-backward compatibility, @command{tar} treats a regular file whose name
-ends with a slash as a directory.
-
-@item @code{LNKTYPE}
-This flag represents a file linked to another file, of any type,
-previously archived. Such files are identified in Unix by each
-file having the same device and inode number. The linked-to name is
-specified in the @code{linkname} field with a trailing null.
-
-@item @code{SYMTYPE}
-This represents a symbolic link to another file. The linked-to name
-is specified in the @code{linkname} field with a trailing null.
-
-@item @code{CHRTYPE}
-@itemx @code{BLKTYPE}
-These represent character special files and block special files
-respectively. In this case the @code{devmajor} and @code{devminor}
-fields will contain the major and minor device numbers respectively.
-Operating systems may map the device specifications to their own
-local specification, or may ignore the entry.
-
-@item @code{DIRTYPE}
-This flag specifies a directory or sub-directory. The directory
-name in the @code{name} field should end with a slash. On systems where
-disk allocation is performed on a directory basis, the @code{size} field
-will contain the maximum number of bytes (which may be rounded to
-the nearest disk block allocation unit) which the directory may
-hold. A @code{size} field of zero indicates no such limiting. Systems
-which do not support limiting in this manner should ignore the
-@code{size} field.
-
-@item @code{FIFOTYPE}
-This specifies a FIFO special file. Note that the archiving of a
-FIFO file archives the existence of this file and not its contents.
-
-@item @code{CONTTYPE}
-This specifies a contiguous file, which is the same as a normal
-file except that, in operating systems which support it, all its
-space is allocated contiguously on the disk. Operating systems
-which do not allow contiguous allocation should silently treat this
-type as a normal file.
-
-@item @code{A} @dots{} @code{Z}
-These are reserved for custom implementations. Some of these are
-used in the @acronym{GNU} modified format, as described below.
+@item
+Let @var{size} be the size of the sparse member, @var{Bs} be its block number
+and @var{Bn} be the block number of the next member.
+Compute:
-@end table
+@smallexample
+@var{N} = @var{Bs} - @var{Bn} - @var{size}/512 - 2
+@end smallexample
-Other values are reserved for specification in future revisions of
-the P1003 standard, and should not be used by any @command{tar} program.
+@noindent
+This number gives the size of the extended header part in tar @dfn{blocks}.
+In our example, this formula gives: @code{897 - 56 - 425984 / 512 - 2
+= 7}.
-The @code{magic} field indicates that this archive was output in
-the P1003 archive format. If this field contains @code{TMAGIC},
-the @code{uname} and @code{gname} fields will contain the ASCII
-representation of the owner and group of the file respectively.
-If found, the user and group IDs are used rather than the values in
-the @code{uid} and @code{gid} fields.
+@item
+Use @command{dd} to extract the headers:
-For references, see ISO/IEC 9945-1:1990 or IEEE Std 1003.1-1990, pages
-169-173 (section 10.1) for @cite{Archive/Interchange File Format}; and
-IEEE Std 1003.2-1992, pages 380-388 (section 4.48) and pages 936-940
-(section E.4.48) for @cite{pax - Portable archive interchange}.
+@smallexample
+@kbd{dd if=@var{archive} of=@var{hname} bs=512 skip=@var{Bs} count=@var{N}}
+@end smallexample
-@node Extensions
-@section @acronym{GNU} Extensions to the Archive Format
-@UNREVISED
+@noindent
+where @var{archive} is the archive name, @var{hname} is a name of the
+file to store the extended header in, @var{Bs} and @var{N} are
+computed in previous steps.
-The @acronym{GNU} format uses additional file types to describe new types of
-files in an archive. These are listed below.
+In our example, this command will be
-@table @code
-@item GNUTYPE_DUMPDIR
-@itemx 'D'
-This represents a directory and a list of files created by the
-@value{op-incremental} option. The @code{size} field gives the total
-size of the associated list of files. Each file name is preceded by
-either a @samp{Y} (the file should be in this archive) or an @samp{N}.
-(The file is a directory, or is not stored in the archive.) Each file
-name is terminated by a null. There is an additional null after the
-last file name.
-
-@item GNUTYPE_MULTIVOL
-@itemx 'M'
-This represents a file continued from another volume of a multi-volume
-archive created with the @value{op-multi-volume} option. The original
-type of the file is not given here. The @code{size} field gives the
-maximum size of this piece of the file (assuming the volume does
-not end before the file is written out). The @code{offset} field
-gives the offset from the beginning of the file where this part of
-the file begins. Thus @code{size} plus @code{offset} should equal
-the original size of the file.
-
-@item GNUTYPE_SPARSE
-@itemx 'S'
-This flag indicates that we are dealing with a sparse file. Note
-that archiving a sparse file requires special operations to find
-holes in the file, which mark the positions of these holes, along
-with the number of bytes of data to be found after the hole.
-
-@item GNUTYPE_VOLHDR
-@itemx 'V'
-This file type is used to mark the volume header that was given with
-the @value{op-label} option when the archive was created. The @code{name}
-field contains the @code{name} given after the @value{op-label} option.
-The @code{size} field is zero. Only the first file in each volume
-of an archive should have this type.
+@smallexample
+$ @kbd{dd if=arc.tar of=xhdr bs=512 skip=56 count=7}
+@end smallexample
+@end enumerate
-@end table
+Finally, you can expand the condensed file, using the obtained header:
-You may have trouble reading a @acronym{GNU} format archive on a
-non-@acronym{GNU} system if the options @value{op-incremental},
-@value{op-multi-volume}, @value{op-sparse}, or @value{op-label} were
-used when writing the archive. In general, if @command{tar} does not
-use the @acronym{GNU}-added fields of the header, other versions of
-@command{tar} should be able to read the archive. Otherwise, the
-@command{tar} program will give an error, the most likely one being a
-checksum error.
+@smallexample
+@group
+$ @kbd{xsparse -v -x xhdr GNUSparseFile.6058/sparsefile}
+Reading extended header file
+Found variable GNU.sparse.size = 217481216
+Found variable GNU.sparse.numblocks = 208
+Found variable GNU.sparse.name = sparsefile
+Found variable GNU.sparse.map = 0,2048,1050624,2048,@dots{}
+Expanding file `GNUSparseFile.28124/sparsefile' to `sparsefile'
+Done
+@end group
+@end smallexample
@node cpio
@section Comparison of @command{tar} and @command{cpio}
@FIXME{Reorganize the following material}
The @command{cpio} archive formats, like @command{tar}, do have maximum
-pathname lengths. The binary and old ASCII formats have a max path
-length of 256, and the new ASCII and CRC ASCII formats have a max
-path length of 1024. @acronym{GNU} @command{cpio} can read and write archives
-with arbitrary pathname lengths, but other @command{cpio} implementations
+file name lengths. The binary and old @acronym{ASCII} formats have a maximum file
+length of 256, and the new @acronym{ASCII} and @acronym{CRC ASCII} formats have a max
+file length of 1024. @acronym{GNU} @command{cpio} can read and write archives
+with arbitrary file name lengths, but other @command{cpio} implementations
may crash unexplainedly trying to read them.
-@command{tar} handles symbolic links in the form in which it comes in BSD;
+@command{tar} handles symbolic links in the form in which it comes in @acronym{BSD};
@command{cpio} doesn't handle symbolic links in the form in which it comes
in System V prior to SVR4, and some vendors may have added symlinks
to their system without enhancing @command{cpio} to know about them.
Others may have enhanced it in a way other than the way I did it
at Sun, and which was adopted by AT&T (and which is, I think, also
present in the @command{cpio} that Berkeley picked up from AT&T and put
-into a later BSD release---I think I gave them my changes).
+into a later @acronym{BSD} release---I think I gave them my changes).
(SVR4 does some funny stuff with @command{tar}; basically, its @command{cpio}
can handle @command{tar} format input, and write it on output, and it
@command{cpio} handles special files; traditional @command{tar} doesn't.
-@command{tar} comes with V7, System III, System V, and BSD source;
-@command{cpio} comes only with System III, System V, and later BSD
+@command{tar} comes with V7, System III, System V, and @acronym{BSD} source;
+@command{cpio} comes only with System III, System V, and later @acronym{BSD}
(4.3-tahoe and later).
@command{tar}'s way of handling multiple hard links to a file can handle
-file systems that support 32-bit inumbers (e.g., the BSD file system);
-@command{cpio}s way requires you to play some games (in its "binary"
-format, i-numbers are only 16 bits, and in its "portable ASCII" format,
-they're 18 bits---it would have to play games with the "file system ID"
-field of the header to make sure that the file system ID/i-number pairs
+file systems that support 32-bit i-numbers (e.g., the @acronym{BSD} file system);
+@command{cpio}s way requires you to play some games (in its ``binary''
+format, i-numbers are only 16 bits, and in its ``portable @acronym{ASCII}'' format,
+they're 18 bits---it would have to play games with the "file system @acronym{ID}"
+field of the header to make sure that the file system @acronym{ID}/i-number pairs
of different files were always different), and I don't know which
@command{cpio}s, if any, play those games. Those that don't might get
confused and think two files are the same file when they're not, and
The exact path to this utility is determined when configuring the package.
It is @file{@var{prefix}/libexec/rmt}, where @var{prefix} stands for
your installation prefix. This location may also be overridden at
-runtime by using @value{op-rmt-command} option (@xref{Option Summary,
+runtime by using the @option{--rmt-command=@var{command}} option (@xref{Option Summary,
---rmt-command}, for detailed description of this option. @xref{Remote
Tape Server}, for the description of @command{rmt} command).
@file{<sys/mtio.h>}.
@table @option
+@xopindex{force-local, short description}
@item --force-local
Archive file is local even if it contains a colon.
+@opindex rsh-command
@item --rsh-command=@var{command}
Use remote @var{command} instead of @command{rsh}. This option exists
so that people who use something other than the standard @command{rsh}
@item -[0-7][lmh]
Specify drive and density.
+@xopindex{multi-volume, short description}
@item -M
@itemx --multi-volume
Create/list/extract multi-volume archive.
that may be larger than will fit on the medium used to hold it.
@xref{Multi-Volume Archives}.
+@xopindex{tape-length, short description}
@item -L @var{num}
-@itemx --tape-length=@var{num}
-Change tape after writing @var{num} x 1024 bytes.
+@itemx --tape-length=@var{size}[@var{suf}]
+Change tape after writing @var{size} units of data. Unless @var{suf} is
+given, @var{size} is treated as kilobytes, i.e. @samp{@var{size} x
+1024} bytes. The following suffixes alter this behavior:
+
+@float Table, size-suffixes
+@caption{Size Suffixes}
+@multitable @columnfractions 0.2 0.3 0.3
+@headitem Suffix @tab Units @tab Byte Equivalent
+@item b @tab Blocks @tab @var{size} x 512
+@item B @tab Kilobytes @tab @var{size} x 1024
+@item c @tab Bytes @tab @var{size}
+@item G @tab Gigabytes @tab @var{size} x 1024^3
+@item K @tab Kilobytes @tab @var{size} x 1024
+@item k @tab Kilobytes @tab @var{size} x 1024
+@item M @tab Megabytes @tab @var{size} x 1024^2
+@item P @tab Petabytes @tab @var{size} x 1024^5
+@item T @tab Terabytes @tab @var{size} x 1024^4
+@item w @tab Words @tab @var{size} x 2
+@end multitable
+@end float
This option might be useful when your tape drivers do not properly
detect end of physical tapes. By being slightly conservative on the
maximum tape length, you might avoid the problem entirely.
+@xopindex{info-script, short description}
+@xopindex{new-volume-script, short description}
@item -F @var{file}
@itemx --info-script=@var{file}
@itemx --new-volume-script=@var{file}
-Execute @file{file} at end of each tape. If @file{file} exits with
-nonzero status, exit. This implies @value{op-multi-volume}.
+Execute @file{file} at end of each tape. This implies
+@option{--multi-volume} (@option{-M}). @xref{info-script}, for a detailed
+description of this option.
@end table
@node Remote Tape Server
-@section The Remote Tape Server
+@section Remote Tape Server
@cindex remote tape drive
@pindex rmt
installed by default.
@cindex absolute file names
-Unless you use the @value{op-absolute-names} option, @GNUTAR{}
-will not allow you to create an archive that contains
+Unless you use the @option{--absolute-names} (@option{-P}) option,
+@GNUTAR{} will not allow you to create an archive that contains
absolute file names (a file name beginning with @samp{/}.) If you try,
@command{tar} will automatically remove the leading @samp{/} from the
file names it stores in the archive. It will also type a warning
relative to the current directory. If you want to extract the files in
an archive to the same absolute names that they had when the archive
was created, you should do a @samp{cd /} before extracting the files
-from the archive, or you should either use the @value{op-absolute-names}
+from the archive, or you should either use the @option{--absolute-names}
option, or use the command @samp{tar -C / @dots{}}.
@cindex Ultrix 3.1 and write failure
written). This is currently possible only on two kinds of files: normal
disk files (or any other file that can be backspaced with @samp{lseek}),
and industry-standard 9-track magnetic tape (or any other kind of tape
-that can be backspaced with the @code{MTIOCTOP} @code{ioctl}.
+that can be backspaced with the @code{MTIOCTOP} @code{ioctl}).
-This means that the @value{op-append}, @value{op-update},
-@value{op-concatenate}, and @value{op-delete} commands will not work on any
-other kind of file. Some media simply cannot be backspaced, which
-means these commands and options will never be able to work on them.
-These non-backspacing media include pipes and cartridge tape drives.
+This means that the @option{--append}, @option{--concatenate}, and
+@option{--delete} commands will not work on any other kind of file.
+Some media simply cannot be backspaced, which means these commands and
+options will never be able to work on them. These non-backspacing
+media include pipes and cartridge tape drives.
Some other media can be backspaced, and @command{tar} will work on them
once @command{tar} is modified to do so.
-Archives created with the @value{op-multi-volume}, @value{op-label}, and
-@value{op-incremental} options may not be readable by other version
+Archives created with the @option{--multi-volume}, @option{--label}, and
+@option{--incremental} (@option{-G}) options may not be readable by other version
of @command{tar}. In particular, restoring a file that was split over
a volume boundary will require some careful work with @command{dd}, if
it can be done at all. Other versions of @command{tar} may also create
an empty file whose name is that of the volume header. Some versions
of @command{tar} may create normal files instead of directories archived
-with the @value{op-incremental} option.
+with the @option{--incremental} (@option{-G}) option.
@node Common Problems and Solutions
@section Some Common Problems and their Solutions
@node Blocking
@section Blocking
-@UNREVISED
+@cindex block
+@cindex record
@dfn{Block} and @dfn{record} terminology is rather confused, and it
is also confusing to the expert reader. On the other hand, readers
When writing to tapes, @command{tar} writes the contents of the archive
in chunks known as @dfn{records}. To change the default blocking
-factor, use the @value{op-blocking-factor} option. Each record will
-then be composed of @var{512-size} blocks. (Each @command{tar} block is
-512 bytes. @xref{Standard}.) Each file written to the archive uses
-at least one full record. As a result, using a larger record size
-can result in more wasted space for small files. On the other hand, a
-larger record size can often be read and written much more efficiently.
+factor, use the @option{--blocking-factor=@var{512-size}} (@option{-b
+@var{512-size}}) option. Each record will then be composed of
+@var{512-size} blocks. (Each @command{tar} block is 512 bytes.
+@xref{Standard}.) Each file written to the archive uses at least one
+full record. As a result, using a larger record size can result in
+more wasted space for small files. On the other hand, a larger record
+size can often be read and written much more efficiently.
Further complicating the problem is that some tape drives ignore the
blocking entirely. For these, a larger record size can still improve
print a message about a non-standard blocking factor, and then operate
normally. On some tape devices, however, @command{tar} cannot figure
out the record size itself. On most of those, you can specify a
-blocking factor (with @value{op-blocking-factor}) larger than the
-actual blocking factor, and then use the @value{op-read-full-records}
-option. (If you specify a blocking factor with
-@value{op-blocking-factor} and don't use the
-@value{op-read-full-records} option, then @command{tar} will not
+blocking factor (with @option{--blocking-factor}) larger than the
+actual blocking factor, and then use the @option{--read-full-records}
+(@option{-B}) option. (If you specify a blocking factor with
+@option{--blocking-factor} and don't use the
+@option{--read-full-records} option, then @command{tar} will not
attempt to figure out the recording size itself.) On some devices,
you must always specify the record size exactly with
-@value{op-blocking-factor} when reading, because @command{tar} cannot
-figure it out. In any case, use @value{op-list} before doing any
-extractions to see whether @command{tar} is reading the archive
+@option{--blocking-factor} when reading, because @command{tar} cannot
+figure it out. In any case, use @option{--list} (@option{-t}) before
+doing any extractions to see whether @command{tar} is reading the archive
correctly.
@command{tar} blocks are all fixed size (512 bytes), and its scheme for
In a standard @command{tar} file (no options), the block size is 512
and the record size is 10240, for a blocking factor of 20. What the
-@value{op-blocking-factor} option does is sets the blocking factor,
+@option{--blocking-factor} option does is sets the blocking factor,
changing the record size while leaving the block size at 512 bytes.
20 was fine for ancient 800 or 1600 bpi reel-to-reel tape drives;
most tape drives these days prefer much bigger records in order to
you can use the options described in the following sections.
If you do not specify any format parameters, @command{tar} uses
default parameters. You cannot modify a compressed archive.
-If you create an archive with the @value{op-blocking-factor} option
-specified (@value{pxref-blocking-factor}), you must specify that
+If you create an archive with the @option{--blocking-factor} option
+specified (@pxref{Blocking Factor}), you must specify that
blocking-factor when operating on the archive. @xref{Formats}, for other
examples of format parameter considerations.
@cindex Blocks per record
@UNREVISED
+@opindex blocking-factor
The data in an archive is grouped into blocks, which are 512 bytes.
Blocks are read and written in whole number multiples called
-@dfn{records}. The number of blocks in a record (ie. the size of a
+@dfn{records}. The number of blocks in a record (i.e., the size of a
record in units of 512 bytes) is called the @dfn{blocking factor}.
-The @value{op-blocking-factor} option specifies the blocking factor of
-an archive. The default blocking factor is typically 20 (i.e.,
-10240 bytes), but can be specified at installation. To find out
-the blocking factor of an existing archive, use @samp{tar --list
---file=@var{archive-name}}. This may not work on some devices.
+The @option{--blocking-factor=@var{512-size}} (@option{-b
+@var{512-size}}) option specifies the blocking factor of an archive.
+The default blocking factor is typically 20 (i.e., 10240 bytes), but
+can be specified at installation. To find out the blocking factor of
+an existing archive, use @samp{tar --list --file=@var{archive-name}}.
+This may not work on some devices.
Records are separated by gaps, which waste space on the archive media.
If you are archiving on magnetic tape, using a larger blocking factor
must specify the same blocking factor when you modify that archive. Some
archive devices will also require you to specify the blocking factor when
reading that archive, however this is not typically the case. Usually, you
-can use @value{op-list} without specifying a blocking factor---@command{tar}
+can use @option{--list} (@option{-t}) without specifying a blocking factor---@command{tar}
reports a non-default record size and then lists the archive members as
it would normally. To extract files from an archive with a non-standard
blocking factor (particularly if you're not sure what the blocking factor
-is), you can usually use the @value{op-read-full-records} option while
+is), you can usually use the @option{--read-full-records} (@option{-B}) option while
specifying a blocking factor larger then the blocking factor of the archive
-(ie. @samp{tar --extract --read-full-records --blocking-factor=300}.
-@xref{list}, for more information on the @value{op-list}
+(i.e., @samp{tar --extract --read-full-records --blocking-factor=300}).
+@xref{list}, for more information on the @option{--list} (@option{-t})
operation. @xref{Reading}, for a more detailed explanation of that option.
@table @option
@item --blocking-factor=@var{number}
@itemx -b @var{number}
Specifies the blocking factor of an archive. Can be used with any
-operation, but is usually not necessary with @value{op-list}.
+operation, but is usually not necessary with @option{--list} (@option{-t}).
@end table
Device blocking
@table @option
@item -b @var{blocks}
@itemx --blocking-factor=@var{blocks}
-Set record size to @math{@var{blocks} * 512} bytes.
+Set record size to @math{@var{blocks}*512} bytes.
This option is used to specify a @dfn{blocking factor} for the archive.
When reading or writing the archive, @command{tar}, will do reads and writes
the archive is directly handled to a local disk, instead of any special
device,
@item
-@value{op-blocking-factor} is not explicitly specified on the @command{tar}
+@option{--blocking-factor} is not explicitly specified on the @command{tar}
invocation.
@end itemize
@command{tar} should rather drain the pipe out before exiting itself.
@end itemize
+@xopindex{ignore-zeros, short description}
@item -i
@itemx --ignore-zeros
Ignore blocks of zeros in archive (means EOF).
-The @value{op-ignore-zeros} option causes @command{tar} to ignore blocks
+The @option{--ignore-zeros} (@option{-i}) option causes @command{tar} to ignore blocks
of zeros in the archive. Normally a block of zeros indicates the
end of the archive, but when reading a damaged archive, or one which
was created by concatenating several archives together, this option
archive file, which may sometimes avoid problems when multiple files
are stored on a single physical tape.
+@xopindex{read-full-records, short description}
@item -B
@itemx --read-full-records
-Reblock as we read (for reading 4.2BSD pipes).
+Reblock as we read (for reading 4.2@acronym{BSD} pipes).
-If @value{op-read-full-records} is used, @command{tar} will not panic if an
-attempt to read a record from the archive does not return a full record.
-Instead, @command{tar} will keep reading until it has obtained a full
+If @option{--read-full-records} is used, @command{tar}
+will not panic if an attempt to read a record from the archive does
+not return a full record. Instead, @command{tar} will keep reading
+until it has obtained a full
record.
This option is turned on by default when @command{tar} is reading
an archive from standard input, or from a remote machine. This is
-because on BSD Unix systems, a read of a pipe will return however
+because on @acronym{BSD} Unix systems, a read of a pipe will return however
much happens to be in the pipe, even if it is less than @command{tar}
requested. If this option was not used, @command{tar} would fail as
soon as it read an incomplete record from the pipe.
full stop, and for later regaining the reading or writing speed.
When the tape driver starts reading a record, the record has to
be read whole without stopping, as a tape gap is needed to stop the
-tape motion without loosing information.
+tape motion without losing information.
@cindex Exabyte blocking
@cindex DAT blocking
head is on. Before writing an archive, you should make sure that no
data on the tape will be overwritten (unless it is no longer needed).
Before reading an archive, you should make sure the tape head is at
-the beginning of the archive you want to read. (The @code{restore}
-script will find the archive automatically. @FIXME-xref{Scripted Restoration}@xref{mt}, for
-an explanation of the tape moving utility.
+the beginning of the archive you want to read. You can do it manually
+via @code{mt} utility (@pxref{mt}). The @code{restore} script does
+that automatically (@pxref{Scripted Restoration}).
If you want to add new archive file entries to a tape, you should
advance the tape to the end of the existing file entries, backspace
@FIXME{Is it true that this only works on non-block devices?
should explain the difference, (fixed or variable).}
-@value{xref-blocking-factor}.
+@xref{Blocking Factor}.
You can use the @command{mt} utility to advance or rewind a tape past a
specified number of archive files on the tape. This will allow you
Moves tape position back @var{number} files.
@item rewind
-Rewinds the tape. (Ignores @var{number}).
+Rewinds the tape. (Ignores @var{number}.)
@item offline
@itemx rewoff1
-Rewinds the tape and takes the tape device off-line. (Ignores @var{number}).
+Rewinds the tape and takes the tape device off-line. (Ignores @var{number}.)
@item status
Prints status information about the tape unit.
@end table
-@FIXME{Is there a better way to frob the spacing on the list?}
+If you don't specify a @var{tapename}, @command{mt} uses the environment
+variable @env{TAPE}; if @env{TAPE} is not set, @command{mt} will use
+the default device specified in your @file{sys/mtio.h} file
+(@code{DEFTAPE} variable). If this is not defined, the program will
+display a descriptive error message and exit with code 1.
+
+@command{mt} returns a 0 exit status when the operation(s) were
+successful, 1 if the command was unrecognized, and 2 if an operation
+failed.
+
+@node Using Multiple Tapes
+@section Using Multiple Tapes
+
+Often you might want to write a large archive, one larger than will fit
+on the actual tape you are using. In such a case, you can run multiple
+@command{tar} commands, but this can be inconvenient, particularly if you
+are using options like @option{--exclude=@var{pattern}} or dumping entire file systems.
+Therefore, @command{tar} provides a special mode for creating
+multi-volume archives.
+
+@dfn{Multi-volume} archive is a single @command{tar} archive, stored
+on several media volumes of fixed size. Although in this section we will
+often call @samp{volume} a @dfn{tape}, there is absolutely no
+requirement for multi-volume archives to be stored on tapes. Instead,
+they can use whatever media type the user finds convenient, they can
+even be located on files.
+
+When creating a multi-volume archive, @GNUTAR{} continues to fill
+current volume until it runs out of space, then it switches to
+next volume (usually the operator is queried to replace the tape on
+this point), and continues working on the new volume. This operation
+continues until all requested files are dumped. If @GNUTAR{} detects
+end of media while dumping a file, such a file is archived in split
+form. Some very big files can even be split across several volumes.
+
+Each volume is itself a valid @GNUTAR{} archive, so it can be read
+without any special options. Consequently any file member residing
+entirely on one volume can be extracted or otherwise operated upon
+without needing the other volume. Sure enough, to extract a split
+member you would need all volumes its parts reside on.
+
+Multi-volume archives suffer from several limitations. In particular,
+they cannot be compressed.
+
+@GNUTAR{} is able to create multi-volume archives of two formats
+(@pxref{Formats}): @samp{GNU} and @samp{POSIX}.
+
+@menu
+* Multi-Volume Archives:: Archives Longer than One Tape or Disk
+* Tape Files:: Tape Files
+* Tarcat:: Concatenate Volumes into a Single Archive
+
+@end menu
+
+@node Multi-Volume Archives
+@subsection Archives Longer than One Tape or Disk
+@cindex Multi-volume archives
+
+@opindex multi-volume
+To create an archive that is larger than will fit on a single unit of
+the media, use the @option{--multi-volume} (@option{-M}) option in conjunction with
+the @option{--create} option (@pxref{create}). A @dfn{multi-volume}
+archive can be manipulated like any other archive (provided the
+@option{--multi-volume} option is specified), but is stored on more
+than one tape or file.
+
+When you specify @option{--multi-volume}, @command{tar} does not report an
+error when it comes to the end of an archive volume (when reading), or
+the end of the media (when writing). Instead, it prompts you to load
+a new storage volume. If the archive is on a magnetic tape, you
+should change tapes when you see the prompt; if the archive is on a
+floppy disk, you should change disks; etc.
+
+@table @option
+@item --multi-volume
+@itemx -M
+Creates a multi-volume archive, when used in conjunction with
+@option{--create} (@option{-c}). To perform any other operation on a multi-volume
+archive, specify @option{--multi-volume} in conjunction with that
+operation.
+For example:
+
+@smallexample
+$ @kbd{tar --create --multi-volume --file=/dev/tape @var{files}}
+@end smallexample
+@end table
+
+The method @command{tar} uses to detect end of tape is not perfect, and
+fails on some operating systems or on some devices. If @command{tar}
+cannot detect the end of the tape itself, you can use
+@option{--tape-length} option to inform it about the capacity of the
+tape:
+
+@anchor{tape-length}
+@table @option
+@opindex tape-length
+@item --tape-length=@var{size}[@var{suf}]
+@itemx -L @var{size}[@var{suf}]
+Set maximum length of a volume. The @var{suf}, if given, specifies
+units in which @var{size} is expressed, e.g. @samp{2M} mean 2
+megabytes (@pxref{size-suffixes}, for a list of allowed size
+suffixes). Without @var{suf}, units of 1024 bytes (kilobyte) are
+assumed.
+
+This option selects @option{--multi-volume} automatically. For example:
+
+@smallexample
+$ @kbd{tar --create --tape-length=41943040 --file=/dev/tape @var{files}}
+@end smallexample
+
+@noindent
+or, which is equivalent:
+
+@smallexample
+$ @kbd{tar --create --tape-length=4G --file=/dev/tape @var{files}}
+@end smallexample
+@end table
+
+@anchor{change volume prompt}
+When @GNUTAR{} comes to the end of a storage media, it asks you to
+change the volume. The built-in prompt for POSIX locale
+is@footnote{If you run @GNUTAR{} under a different locale, the
+translation to the locale's language will be used.}:
-If you don't specify a @var{tapename}, @command{mt} uses the environment
-variable @env{TAPE}; if @env{TAPE} is not set, @command{mt} uses the device
-@file{/dev/rmt12}.
-
-@command{mt} returns a 0 exit status when the operation(s) were
-successful, 1 if the command was unrecognized, and 2 if an operation
-failed.
-
-@node Using Multiple Tapes
-@section Using Multiple Tapes
-@UNREVISED
+@smallexample
+Prepare volume #@var{n} for `@var{archive}' and hit return:
+@end smallexample
-Often you might want to write a large archive, one larger than will fit
-on the actual tape you are using. In such a case, you can run multiple
-@command{tar} commands, but this can be inconvenient, particularly if you
-are using options like @value{op-exclude} or dumping entire file systems.
-Therefore, @command{tar} supports multiple tapes automatically.
-
-Use @value{op-multi-volume} on the command line, and then @command{tar} will,
-when it reaches the end of the tape, prompt for another tape, and
-continue the archive. Each tape will have an independent archive, and
-can be read without needing the other. (As an exception to this, the
-file that @command{tar} was archiving when it ran out of tape will usually
-be split between the two archives; in this case you need to extract from
-the first archive, using @value{op-multi-volume}, and then put in the
-second tape when prompted, so @command{tar} can restore both halves of the
-file.)
-
-@GNUTAR{} multi-volume archives do not use a truly
-portable format. You need @GNUTAR{} at both end to
-process them properly.
+@noindent
+where @var{n} is the ordinal number of the volume to be created and
+@var{archive} is archive file or device name.
When prompting for a new tape, @command{tar} accepts any of the following
responses:
@table @kbd
@item ?
-Request @command{tar} to explain possible responses
+Request @command{tar} to explain possible responses.
@item q
Request @command{tar} to exit immediately.
-@item n @var{file name}
-Request @command{tar} to write the next volume on the file @var{file name}.
+@item n @var{file-name}
+Request @command{tar} to write the next volume on the file @var{file-name}.
@item !
-Request @command{tar} to run a subshell.
+Request @command{tar} to run a subshell. This option can be disabled
+by giving @option{--restrict} command line option to
+@command{tar}@footnote{@xref{--restrict}, for more information about
+this option.}.
@item y
Request @command{tar} to begin writing the next volume.
@end table
(You should only type @samp{y} after you have changed the tape;
otherwise @command{tar} will write over the volume it just finished.)
-If you want more elaborate behavior than this, give @command{tar} the
-@value{op-info-script} option. The file @var{script-name} is expected
-to be a program (or shell script) to be run instead of the normal
-prompting procedure. If the program fails, @command{tar} exits;
-otherwise, @command{tar} begins writing the next volume. The behavior
-of the
-@samp{n} response to the normal tape-change prompt is not available
-if you use @value{op-info-script}.
+@cindex Volume number file
+@cindex volno file
+@anchor{volno-file}
+@opindex volno-file
+The volume number used by @command{tar} in its tape-changing prompt
+can be changed; if you give the
+@option{--volno-file=@var{file-of-number}} option, then
+@var{file-of-number} should be an non-existing file to be created, or
+else, a file already containing a decimal number. That number will be
+used as the volume number of the first volume written. When
+@command{tar} is finished, it will rewrite the file with the
+now-current volume number. (This does not change the volume number
+written on a tape label, as per @ref{label}, it @emph{only} affects
+the number used in the prompt.)
+
+@cindex End-of-archive info script
+@cindex Info script
+@anchor{info-script}
+@opindex info-script
+@opindex new-volume-script
+If you want more elaborate behavior than this, you can write a special
+@dfn{new volume script}, that will be responsible for changing the
+volume, and instruct @command{tar} to use it instead of its normal
+prompting procedure:
-The method @command{tar} uses to detect end of tape is not perfect, and
-fails on some operating systems or on some devices. You can use the
-@value{op-tape-length} option if @command{tar} can't detect the end of the
-tape itself. This option selects @value{op-multi-volume} automatically.
-The @var{size} argument should then be the usable size of the tape.
-But for many devices, and floppy disks in particular, this option is
-never required for real, as far as we know.
-
-The volume number used by @command{tar} in its tape-change prompt
-can be changed; if you give the @value{op-volno-file} option, then
-@var{file-of-number} should be an unexisting file to be created, or else,
-a file already containing a decimal number. That number will be used
-as the volume number of the first volume written. When @command{tar} is
-finished, it will rewrite the file with the now-current volume number.
-(This does not change the volume number written on a tape label, as
-per @value{ref-label}, it @emph{only} affects the number used in
-the prompt.)
-
-If you want @command{tar} to cycle through a series of tape drives, then
-you can use the @samp{n} response to the tape-change prompt. This is
-error prone, however, and doesn't work at all with @value{op-info-script}.
-Therefore, if you give @command{tar} multiple @value{op-file} options, then
-the specified files will be used, in sequence, as the successive volumes
-of the archive. Only when the first one in the sequence needs to be
-used again will @command{tar} prompt for a tape change (or run the info
-script).
-
-Multi-volume archives
-
-With @value{op-multi-volume}, @command{tar} will not abort when it cannot
-read or write any more data. Instead, it will ask you to prepare a new
-volume. If the archive is on a magnetic tape, you should change tapes
-now; if the archive is on a floppy disk, you should change disks, etc.
-
-Each volume of a multi-volume archive is an independent @command{tar}
-archive, complete in itself. For example, you can list or extract any
-volume alone; just don't specify @value{op-multi-volume}. However, if one
-file in the archive is split across volumes, the only way to extract
-it successfully is with a multi-volume extract command @option{--extract
---multi-volume} (@option{-xM}) starting on or before the volume where
-the file begins.
-
-For example, let's presume someone has two tape drives on a system
-named @file{/dev/tape0} and @file{/dev/tape1}. For having @GNUTAR{}
-to switch to the second drive when it needs to write the
+@table @option
+@item --info-script=@var{script-name}
+@itemx --new-volume-script=@var{script-name}
+@itemx -F @var{script-name}
+Specify the full name of the volume script to use. The script can be
+used to eject cassettes, or to broadcast messages such as
+@samp{Someone please come change my tape} when performing unattended
+backups.
+@end table
+
+The @var{script-name} is executed without any command line
+arguments. It inherits @command{tar}'s shell environment.
+Additional data is passed to it via the following
+environment variables:
+
+@table @env
+@vrindex TAR_VERSION, info script environment variable
+@item TAR_VERSION
+@GNUTAR{} version number.
+
+@vrindex TAR_ARCHIVE, info script environment variable
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_BLOCKING_FACTOR, info script environment variable
+@item TAR_BLOCKING_FACTOR
+Current blocking factor (@pxref{Blocking}).
+
+@vrindex TAR_VOLUME, info script environment variable
+@item TAR_VOLUME
+Ordinal number of the volume @command{tar} is about to start.
+
+@vrindex TAR_SUBCOMMAND, info script environment variable
+@item TAR_SUBCOMMAND
+A short option describing the operation @command{tar} is executing.
+@xref{Operations}, for a complete list of subcommand options.
+
+@vrindex TAR_FORMAT, info script environment variable
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+
+@vrindex TAR_FD, info script environment variable
+@item TAR_FD
+File descriptor which can be used to communicate the new volume
+name to @command{tar}.
+@end table
+
+The volume script can instruct @command{tar} to use new archive name,
+by writing in to file descriptor @env{$TAR_FD} (see below for an example).
+
+If the info script fails, @command{tar} exits; otherwise, it begins
+writing the next volume.
+
+If you want @command{tar} to cycle through a series of files or tape
+drives, there are three approaches to choose from. First of all, you
+can give @command{tar} multiple @option{--file} options. In this case
+the specified files will be used, in sequence, as the successive
+volumes of the archive. Only when the first one in the sequence needs
+to be used again will @command{tar} prompt for a tape change (or run
+the info script). For example, suppose someone has two tape drives on
+a system named @file{/dev/tape0} and @file{/dev/tape1}. For having
+@GNUTAR{} to switch to the second drive when it needs to write the
second tape, and then back to the first tape, etc., just do either of:
@smallexample
$ @kbd{tar cMff /dev/tape0 /dev/tape1 @var{files}}
@end smallexample
-@menu
-* Multi-Volume Archives:: Archives Longer than One Tape or Disk
-* Tape Files:: Tape Files
-* Tarcat:: Concatenate Volumes into a Single Archive
+The second method is to use the @samp{n} response to the tape-change
+prompt.
-@end menu
+Finally, the most flexible approach is to use a volume script, that
+writes new archive name to the file descriptor @env{$TAR_FD}. For example, the
+following volume script will create a series of archive files, named
+@file{@var{archive}-@var{vol}}, where @var{archive} is the name of the
+archive being created (as given by @option{--file} option) and
+@var{vol} is the ordinal number of the archive being created:
-@node Multi-Volume Archives
-@subsection Archives Longer than One Tape or Disk
-@cindex Multi-volume archives
-@UNREVISED
+@smallexample
+@group
+#! /bin/sh
+echo Preparing volume $TAR_VOLUME of $TAR_ARCHIVE.
+
+name=`expr $TAR_ARCHIVE : '\(.*\)-.*'`
+case $TAR_SUBCOMMAND in
+-c) ;;
+-d|-x|-t) test -r $@{name:-$TAR_ARCHIVE@}-$TAR_VOLUME || exit 1
+ ;;
+*) exit 1
+esac
+
+echo $@{name:-$TAR_ARCHIVE@}-$TAR_VOLUME >&$TAR_FD
+@end group
+@end smallexample
-To create an archive that is larger than will fit on a single unit of
-the media, use the @value{op-multi-volume} option in conjunction with
-the @value{op-create} option (@pxref{create}). A
-@dfn{multi-volume} archive can be manipulated like any other archive
-(provided the @value{op-multi-volume} option is specified), but is
-stored on more than one tape or disk.
+The same script can be used while listing, comparing or extracting
+from the created archive. For example:
-When you specify @value{op-multi-volume}, @command{tar} does not report an
-error when it comes to the end of an archive volume (when reading), or
-the end of the media (when writing). Instead, it prompts you to load
-a new storage volume. If the archive is on a magnetic tape, you
-should change tapes when you see the prompt; if the archive is on a
-floppy disk, you should change disks; etc.
+@smallexample
+@group
+# @r{Create a multi-volume archive:}
+$ @kbd{tar -c -L1024 -f archive.tar -F new-volume .}
+# @r{Extract from the created archive:}
+$ @kbd{tar -x -f archive.tar -F new-volume .}
+@end group
+@end smallexample
+
+@noindent
+Notice, that the first command had to use @option{-L} option, since
+otherwise @GNUTAR{} will end up writing everything to file
+@file{archive.tar}.
You can read each individual volume of a multi-volume archive as if it
were an archive by itself. For example, to list the contents of one
-volume, use @value{op-list}, without @value{op-multi-volume} specified.
+volume, use @option{--list}, without @option{--multi-volume} specified.
To extract an archive member from one volume (assuming it is described
-that volume), use @value{op-extract}, again without
-@value{op-multi-volume}.
+that volume), use @option{--extract}, again without
+@option{--multi-volume}.
-If an archive member is split across volumes (ie. its entry begins on
+If an archive member is split across volumes (i.e., its entry begins on
one volume of the media and ends on another), you need to specify
-@value{op-multi-volume} to extract it successfully. In this case, you
+@option{--multi-volume} to extract it successfully. In this case, you
should load the volume where the archive member starts, and use
@samp{tar --extract --multi-volume}---@command{tar} will prompt for later
volumes as it needs them. @xref{extracting archives}, for more
information about extracting archives.
-@value{op-info-script} is like @value{op-multi-volume}, except that
-@command{tar} does not prompt you directly to change media volumes when
-a volume is full---instead, @command{tar} runs commands you have stored
-in @var{script-name}. For example, this option can be used to eject
-cassettes, or to broadcast messages such as @samp{Someone please come
-change my tape} when performing unattended backups. When @var{script-name}
-is done, @command{tar} will assume that the media has been changed.
-
Multi-volume archives can be modified like any other archive. To add
files to a multi-volume archive, you need to only mount the last
volume of the archive media (and new volumes, if needed). For all
other operations, you need to use the entire archive.
-If a multi-volume archive was labeled using @value{op-label}
-(@value{pxref-label}) when it was created, @command{tar} will not
-automatically label volumes which are added later. To label subsequent
-volumes, specify @value{op-label} again in conjunction with the
-@value{op-append}, @value{op-update} or @value{op-concatenate} operation.
-
-@cindex Labeling multi-volume archives
-@FIXME{example}
-
-@FIXME{There should be a sample program here, including an exit
-before end. Is the exit status even checked in tar? :-(}
-
-@table @option
-@item --multi-volume
-@itemx -M
-Creates a multi-volume archive, when used in conjunction with
-@value{op-create}. To perform any other operation on a multi-volume
-archive, specify @value{op-multi-volume} in conjunction with that
-operation.
+If a multi-volume archive was labeled using
+@option{--label=@var{archive-label}} (@pxref{label}) when it was
+created, @command{tar} will not automatically label volumes which are
+added later. To label subsequent volumes, specify
+@option{--label=@var{archive-label}} again in conjunction with the
+@option{--append}, @option{--update} or @option{--concatenate} operation.
-@item --info-script=@var{program-file}
-@itemx -F @var{program-file}
-Creates a multi-volume archive via a script. Used in conjunction with
-@value{op-create}.
-@end table
-
-Beware that there is @emph{no} real standard about the proper way, for
-a @command{tar} archive, to span volume boundaries. If you have a
-multi-volume created by some vendor's @command{tar}, there is almost
-no chance you could read all the volumes with @GNUTAR{}.
-The converse is also true: you may not expect
-multi-volume archives created by @GNUTAR{} to be
-fully recovered by vendor's @command{tar}. Since there is little
-chance that, in mixed system configurations, some vendor's
-@command{tar} will work on another vendor's machine, and there is a
-great chance that @GNUTAR{} will work on most of
-them, your best bet is to install @GNUTAR{} on all
-machines between which you know exchange of files is possible.
+Notice that multi-volume support is a GNU extension and the archives
+created in this mode should be read only using @GNUTAR{}. If you
+absolutely have to process such archives using a third-party @command{tar}
+implementation, read @ref{Split Recovery}.
@node Tape Files
@subsection Tape Files
+@cindex labeling archives
+@opindex label
@UNREVISED
To give the archive a name which will be recorded in it, use the
-@value{op-label} option. This will write a special block identifying
-@var{volume-label} as the name of the archive to the front of the archive
-which will be displayed when the archive is listed with @value{op-list}.
-If you are creating a multi-volume archive with
-@value{op-multi-volume}@FIXME-pxref{Using Multiple Tapes}, then the
-volume label will have
-@samp{Volume @var{nnn}} appended to the name you give, where @var{nnn} is
-the number of the volume of the archive. (If you use the @value{op-label}
-option when reading an archive, it checks to make sure the label on the
-tape matches the one you give. @value{xref-label}.
+@option{--label=@var{volume-label}} (@option{-V @var{volume-label}})
+option. This will write a special block identifying
+@var{volume-label} as the name of the archive to the front of the
+archive which will be displayed when the archive is listed with
+@option{--list}. If you are creating a multi-volume archive with
+@option{--multi-volume} (@pxref{Using Multiple Tapes}), then the
+volume label will have @samp{Volume @var{nnn}} appended to the name
+you give, where @var{nnn} is the number of the volume of the archive.
+If you use the @option{--label=@var{volume-label}} option when
+reading an archive, it checks to make sure the label on the tape
+matches the one you gave. @xref{label}.
When @command{tar} writes an archive to tape, it creates a single
tape file. If multiple archives are written to the same tape, one
@section Including a Label in the Archive
@cindex Labeling an archive
@cindex Labels on the archive media
-@UNREVISED
+@cindex Labeling multi-volume archives
-@cindex @option{--label} option introduced
-@cindex @option{-V} option introduced
+@opindex label
To avoid problems caused by misplaced paper labels on the archive
-media, you can include a @dfn{label} entry---an archive member which
-contains the name of the archive---in the archive itself. Use the
-@value{op-label} option in conjunction with the @value{op-create} operation
-to include a label entry in the archive as it is being created.
+media, you can include a @dfn{label} entry --- an archive member which
+contains the name of the archive --- in the archive itself. Use the
+@option{--label=@var{archive-label}} (@option{-V @var{archive-label}})
+option@footnote{Until version 1.10, that option was called
+@option{--volume}, but is not available under that name anymore.} in
+conjunction with the @option{--create} operation to include a label
+entry in the archive as it is being created.
@table @option
@item --label=@var{archive-label}
@itemx -V @var{archive-label}
Includes an @dfn{archive-label} at the beginning of the archive when
the archive is being created, when used in conjunction with the
-@value{op-create} operation. Checks to make sure the archive label
+@option{--create} operation. Checks to make sure the archive label
matches the one specified (when used in conjunction with any other
-operation.
+operation).
@end table
- If you create an archive using both @value{op-label} and
-@value{op-multi-volume}, each volume of the archive will have an
-archive label of the form @samp{@var{archive-label} Volume @var{n}},
-where @var{n} is 1 for the first volume, 2 for the next, and so on.
-@FIXME-xref{Multi-Volume Archives, for information on creating multiple
-volume archives.}
+ If you create an archive using both
+@option{--label=@var{archive-label}} (@option{-V @var{archive-label}})
+and @option{--multi-volume} (@option{-M}), each volume of the archive
+will have an archive label of the form @samp{@var{archive-label}
+Volume @var{n}}, where @var{n} is 1 for the first volume, 2 for the
+next, and so on. @xref{Using Multiple Tapes}, for information on
+creating multiple volume archives.
@cindex Volume label, listing
@cindex Listing volume label
The volume label will be displayed by @option{--list} along with
the file contents. If verbose display is requested, it will also be
-explicitely marked as in the example below:
+explicitly marked as in the example below:
@smallexample
@group
$ @kbd{tar --verbose --list --file=iamanarchive}
V--------- 0 0 0 1992-03-07 12:01 iamalabel--Volume Header--
--rw-rw-rw- ringo user 40 1990-05-21 13:30 iamafilename
+-rw-r--r-- ringo user 40 1990-05-21 13:30 iamafilename
@end group
@end smallexample
-@cindex @option{--test-label} option introduced
+@opindex test-label
@anchor{--test-label option}
However, @option{--list} option will cause listing entire
contents of the archive, which may be undesirable (for example, if the
archive is stored on a tape). You can request checking only the volume
-by specifying @option{--test-label} option. This option reads only the
+label by specifying @option{--test-label} option. This option reads only the
first block of an archive, so it can be used with slow storage
devices. For example:
@end group
@end smallexample
- If @option{--test-label} is used with a single command line
-argument, @command{tar} compares the volume label with the
-argument. It exits with code 0 if the two strings match, and with code
-2 otherwise. In this case no output is displayed. For example:
+ If @option{--test-label} is used with one or more command line
+arguments, @command{tar} compares the volume label with each
+argument. It exits with code 0 if a match is found, and with code 1
+otherwise@footnote{Note that @GNUTAR{} versions up to 1.23 indicated
+mismatch with an exit code 2 and printed a spurious diagnostics on
+stderr.}. No output is displayed, unless you also used the
+@option{--verbose} option. For example:
+
+@smallexample
+@group
+$ @kbd{tar --test-label --file=iamanarchive 'iamalabel'}
+@result{} 0
+$ @kbd{tar --test-label --file=iamanarchive 'alabel'}
+@result{} 1
+@end group
+@end smallexample
+
+ When used with the @option{--verbose} option, @command{tar}
+prints the actual volume label (if any), and a verbose diagnostics in
+case of a mismatch:
@smallexample
@group
-$ @kbd{tar --test-label --file=iamanarchive 'iamalable'}
+$ @kbd{tar --test-label --verbose --file=iamanarchive 'iamalabel'}
+iamalabel
@result{} 0
-$ @kbd{tar --test-label --file=iamanarchive 'iamalable' alabel}
+$ @kbd{tar --test-label --verbose --file=iamanarchive 'alabel'}
+iamalabel
+tar: Archive label mismatch
@result{} 1
@end group
@end smallexample
the archive label matches the one specified and will refuse to proceed
if it does not. Use this as a safety precaution to avoid accidentally
overwriting existing archives. For example, if you wish to add files
-to @file{archive}, presumably labelled with string @samp{My volume},
+to @file{archive}, presumably labeled with string @samp{My volume},
you will get:
@smallexample
@noindent
in case its label does not match. This will work even if
-@file{archive} is not labelled at all.
+@file{archive} is not labeled at all.
Similarly, @command{tar} will refuse to list or extract the
archive if its label doesn't match the @var{archive-label}
regular expression matching, or before that, only exact string
matching, instead of wildcard matchers. We decided for the sake of
simplicity to use a uniform matching device through
-@command{tar}.}. If the switch @value{op-multi-volume} is being used,
+@command{tar}.}. If the switch @option{--multi-volume} (@option{-M}) is being used,
the volume label matcher will also suffix @var{archive-label} by
@w{@samp{ Volume [1-9]*}} if the initial match fails, before giving
up. Since the volume numbering is automatically added in labels at
creation time, it sounded logical to equally help the user taking care
of it when the archive is being read.
- The @value{op-label} was once called @option{--volume}, but is not available
-under that name anymore.
-
You can also use @option{--label} to get a common information on
all tapes of a series. For having this information different in each
series created through a single script used on a regular basis, just
@group
$ @kbd{tar cfMV /dev/tape "Daily backup for `date +%Y-%m-%d`"}
$ @kbd{tar --create --file=/dev/tape --multi-volume \
- --volume="Daily backup for `date +%Y-%m-%d`"}
+ --label="Daily backup for `date +%Y-%m-%d`"}
@end group
@end smallexample
- Also note that each label has its own date and time, which corresponds
-to when @GNUTAR{} initially attempted to write it,
+ Some more notes about volume labels:
+
+@itemize @bullet
+@item Each label has its own date and time, which corresponds
+to the time when @GNUTAR{} initially attempted to write it,
often soon after the operator launches @command{tar} or types the
-carriage return telling that the next tape is ready. Comparing date
-labels does give an idea of tape throughput only if the delays for
-rewinding tapes and the operator switching them were negligible, which
-is usually not the case.
+carriage return telling that the next tape is ready.
+
+@item Comparing date labels to get an idea of tape throughput is
+unreliable. It gives correct results only if the delays for rewinding
+tapes and the operator switching them were negligible, which is
+usually not the case.
+@end itemize
@node verify
@section Verifying Data as It is Stored
@table @option
@item -W
@itemx --verify
+@opindex verify, short description
Attempt to verify the archive after writing.
@end table
operation, or can compare a previously written archive, to insure that
it is up to date.
+@xopindex{verify, using with @option{--create}}
+@xopindex{create, using with @option{--verify}}
To check for discrepancies in an archive immediately after it is
-written, use the @value{op-verify} option in conjunction with
-the @value{op-create} operation. When this option is
+written, use the @option{--verify} (@option{-W}) option in conjunction with
+the @option{--create} operation. When this option is
specified, @command{tar} checks archive members against their counterparts
in the file system, and reports discrepancies on the standard error.
errors on some tapes. Archives written to pipes, some cartridge tape
drives, and some other devices cannot be verified.
-One can explicitly compare an already made archive with the file system
-by using the @value{op-compare} option, instead of using the more automatic
-@value{op-verify} option. @value{xref-compare}.
+One can explicitly compare an already made archive with the file
+system by using the @option{--compare} (@option{--diff}, @option{-d})
+option, instead of using the more automatic @option{--verify} option.
+@xref{compare}.
Note that these two options have a slightly different intent. The
-@value{op-compare} option how identical are the logical contents of some
-archive with what is on your disks, while the @value{op-verify} option is
+@option{--compare} option checks how identical are the logical contents of some
+archive with what is on your disks, while the @option{--verify} option is
really for checking if the physical contents agree and if the recording
-media itself is of dependable quality. So, for the @value{op-verify}
+media itself is of dependable quality. So, for the @option{--verify}
operation, @command{tar} tries to defeat all in-memory cache pertaining to
the archive, while it lets the speed optimization undisturbed for the
-@value{op-compare} option. If you nevertheless use @value{op-compare} for
+@option{--compare} option. If you nevertheless use @option{--compare} for
media verification, you may have to defeat the in-memory cache yourself,
maybe by opening and reclosing the door latch of your recording unit,
forcing some doubt in your operating system about the fact this is really
the same volume as the one just written or read.
-The @value{op-verify} option would not be necessary if drivers were indeed
+The @option{--verify} option would not be necessary if drivers were indeed
able to detect dependably all write failures. This sometimes require many
magnetic heads, some able to read after the writes occurred. One would
not say that drivers unable to detect all cases are necessarily flawed,
as long as programming is concerned.
-The @value{op-verify} option will not work in conjunction with the
-@value{op-multi-volume} option or the @value{op-append},
-@value{op-update} and @value{op-delete} operations. @xref{Operations},
-for more information on these operations.
+The @option{--verify} (@option{-W}) option will not work in
+conjunction with the @option{--multi-volume} (@option{-M}) option or
+the @option{--append} (@option{-r}), @option{--update} (@option{-u})
+and @option{--delete} operations. @xref{Operations}, for more
+information on these operations.
Also, since @command{tar} normally strips leading @samp{/} from file
names (@pxref{absolute}), a command like @samp{tar --verify -cf
Once an archive is written, you should write protect the media to prevent
the archive from being accidentally overwritten or deleted. (This will
protect the archive from being changed with a tape or floppy drive---it
-will not protect it from magnet fields or other physical hazards).
+will not protect it from magnet fields or other physical hazards.)
The write protection device itself is usually an integral part of the
physical media, and can be a two position (write enabled/write
which can be removed from the center of a tape reel, or some other
changeable feature.
-@node Free Software Needs Free Documentation
-@appendix Free Software Needs Free Documentation
-@include freemanuals.texi
+@node Reliability and security
+@chapter Reliability and Security
-@node Genfile
-@appendix Genfile
-@include genfile.texi
+The @command{tar} command reads and writes files as any other
+application does, and is subject to the usual caveats about
+reliability and security. This section contains some commonsense
+advice on the topic.
+
+@menu
+* Reliability::
+* Security::
+@end menu
+
+@node Reliability
+@section Reliability
-@node Snapshot Files
-@appendix Format of the Incremental Snapshot Files
-@include snapshot.texi
+Ideally, when @command{tar} is creating an archive, it reads from a
+file system that is not being modified, and encounters no errors or
+inconsistencies while reading and writing. If this is the case, the
+archive should faithfully reflect what was read. Similarly, when
+extracting from an archive, ideally @command{tar} ideally encounters
+no errors and the extracted files faithfully reflect what was in the
+archive.
-@node Copying This Manual
-@appendix Copying This Manual
+However, when reading or writing real-world file systems, several
+things can go wrong; these include permissions problems, corruption of
+data, and race conditions.
@menu
-* GNU Free Documentation License:: License for copying this manual
+* Permissions problems::
+* Data corruption and repair::
+* Race conditions::
@end menu
+@node Permissions problems
+@subsection Permissions Problems
+
+If @command{tar} encounters errors while reading or writing files, it
+normally reports an error and exits with nonzero status. The work it
+does may therefore be incomplete. For example, when creating an
+archive, if @command{tar} cannot read a file then it cannot copy the
+file into the archive.
+
+@node Data corruption and repair
+@subsection Data Corruption and Repair
+
+If an archive becomes corrupted by an I/O error, this may corrupt the
+data in an extracted file. Worse, it may corrupt the file's metadata,
+which may cause later parts of the archive to become misinterpreted.
+An tar-format archive contains a checksum that most likely will detect
+errors in the metadata, but it will not detect errors in the data.
+
+If data corruption is a concern, you can compute and check your own
+checksums of an archive by using other programs, such as
+@command{cksum}.
+
+When attempting to recover from a read error or data corruption in an
+archive, you may need to skip past the questionable data and read the
+rest of the archive. This requires some expertise in the archive
+format and in other software tools.
+
+@node Race conditions
+@subsection Race conditions
+
+If some other process is modifying the file system while @command{tar}
+is reading or writing files, the result may well be inconsistent due
+to race conditions. For example, if another process creates some
+files in a directory while @command{tar} is creating an archive
+containing the directory's files, @command{tar} may see some of the
+files but not others, or it may see a file that is in the process of
+being created. The resulting archive may not be a snapshot of the
+file system at any point in time. If an application such as a
+database system depends on an accurate snapshot, restoring from the
+@command{tar} archive of a live file system may therefore break that
+consistency and may break the application. The simplest way to avoid
+the consistency issues is to avoid making other changes to the file
+system while tar is reading it or writing it.
+
+When creating an archive, several options are available to avoid race
+conditions. Some hosts have a way of snapshotting a file system, or
+of temporarily suspending all changes to a file system, by (say)
+suspending the only virtual machine that can modify a file system; if
+you use these facilities and have @command{tar -c} read from a
+snapshot when creating an archive, you can avoid inconsistency
+problems. More drastically, before starting @command{tar} you could
+suspend or shut down all processes other than @command{tar} that have
+access to the file system, or you could unmount the file system and
+then mount it read-only.
+
+When extracting from an archive, one approach to avoid race conditions
+is to create a directory that no other process can write to, and
+extract into that.
+
+@node Security
+@section Security
+
+In some cases @command{tar} may be used in an adversarial situation,
+where an untrusted user is attempting to gain information about or
+modify otherwise-inaccessible files. Dealing with untrusted data
+(that is, data generated by an untrusted user) typically requires
+extra care, because even the smallest mistake in the use of
+@command{tar} is more likely to be exploited by an adversary than by a
+race condition.
+
+@menu
+* Privacy::
+* Integrity::
+* Live untrusted data::
+* Security rules of thumb::
+@end menu
+
+@node Privacy
+@subsection Privacy
+
+Standard privacy concerns apply when using @command{tar}. For
+example, suppose you are archiving your home directory into a file
+@file{/archive/myhome.tar}. Any secret information in your home
+directory, such as your SSH secret keys, are copied faithfully into
+the archive. Therefore, if your home directory contains any file that
+should not be read by some other user, the archive itself should be
+not be readable by that user. And even if the archive's data are
+inaccessible to untrusted users, its metadata (such as size or
+last-modified date) may reveal some information about your home
+directory; if the metadata are intended to be private, the archive's
+parent directory should also be inaccessible to untrusted users.
+
+One precaution is to create @file{/archive} so that it is not
+accessible to any user, unless that user also has permission to access
+all the files in your home directory.
+
+Similarly, when extracting from an archive, take care that the
+permissions of the extracted files are not more generous than what you
+want. Even if the archive itself is readable only to you, files
+extracted from it have their own permissions that may differ.
+
+@node Integrity
+@subsection Integrity
+
+When creating archives, take care that they are not writable by a
+untrusted user; otherwise, that user could modify the archive, and
+when you later extract from the archive you will get incorrect data.
+
+When @command{tar} extracts from an archive, by default it writes into
+files relative to the working directory. If the archive was generated
+by an untrusted user, that user therefore can write into any file
+under the working directory. If the working directory contains a
+symbolic link to another directory, the untrusted user can also write
+into any file under the referenced directory. When extracting from an
+untrusted archive, it is therefore good practice to create an empty
+directory and run @command{tar} in that directory.
+
+When extracting from two or more untrusted archives, each one should
+be extracted independently, into different empty directories.
+Otherwise, the first archive could create a symbolic link into an area
+outside the working directory, and the second one could follow the
+link and overwrite data that is not under the working directory. For
+example, when restoring from a series of incremental dumps, the
+archives should have been created by a trusted process, as otherwise
+the incremental restores might alter data outside the working
+directory.
+
+If you use the @option{--absolute-names} (@option{-P}) option when
+extracting, @command{tar} respects any file names in the archive, even
+file names that begin with @file{/} or contain @file{..}. As this
+lets the archive overwrite any file in your system that you can write,
+the @option{--absolute-names} (@option{-P}) option should be used only
+for trusted archives.
+
+Conversely, with the @option{--keep-old-files} (@option{-k}) option,
+@command{tar} refuses to replace existing files when extracting; and
+with the @option{--no-overwrite-dir} option, @command{tar} refuses to
+replace the permissions or ownership of already-existing directories.
+These options may help when extracting from untrusted archives.
+
+@node Live untrusted data
+@subsection Dealing with Live Untrusted Data
+
+Extra care is required when creating from or extracting into a file
+system that is accessible to untrusted users. For example, superusers
+who invoke @command{tar} must be wary about its actions being hijacked
+by an adversary who is reading or writing the file system at the same
+time that @command{tar} is operating.
+
+When creating an archive from a live file system, @command{tar} is
+vulnerable to denial-of-service attacks. For example, an adversarial
+user could create the illusion of an indefinitely-deep directory
+hierarchy @file{d/e/f/g/...} by creating directories one step ahead of
+@command{tar}, or the illusion of an indefinitely-long file by
+creating a sparse file but arranging for blocks to be allocated just
+before @command{tar} reads them. There is no easy way for
+@command{tar} to distinguish these scenarios from legitimate uses, so
+you may need to monitor @command{tar}, just as you'd need to monitor
+any other system service, to detect such attacks.
+
+While a superuser is extracting from an archive into a live file
+system, an untrusted user might replace a directory with a symbolic
+link, in hopes that @command{tar} will follow the symbolic link and
+extract data into files that the untrusted user does not have access
+to. Even if the archive was generated by the superuser, it may
+contain a file such as @file{d/etc/passwd} that the untrusted user
+earlier created in order to break in; if the untrusted user replaces
+the directory @file{d/etc} with a symbolic link to @file{/etc} while
+@command{tar} is running, @command{tar} will overwrite
+@file{/etc/passwd}. This attack can be prevented by extracting into a
+directory that is inaccessible to untrusted users.
+
+Similar attacks via symbolic links are also possible when creating an
+archive, if the untrusted user can modify an ancestor of a top-level
+argument of @command{tar}. For example, an untrusted user that can
+modify @file{/home/eve} can hijack a running instance of @samp{tar -cf
+- /home/eve/Documents/yesterday} by replacing
+@file{/home/eve/Documents} with a symbolic link to some other
+location. Attacks like these can be prevented by making sure that
+untrusted users cannot modify any files that are top-level arguments
+to @command{tar}, or any ancestor directories of these files.
+
+@node Security rules of thumb
+@subsection Security Rules of Thumb
+
+This section briefly summarizes rules of thumb for avoiding security
+pitfalls.
+
+@itemize @bullet
+
+@item
+Protect archives at least as much as you protect any of the files
+being archived.
+
+@item
+Extract from an untrusted archive only into an otherwise-empty
+directory. This directory and its parent should be accessible only to
+trusted users. For example:
+
+@example
+@group
+$ @kbd{chmod go-rwx .}
+$ @kbd{mkdir -m go-rwx dir}
+$ @kbd{cd dir}
+$ @kbd{tar -xvf /archives/got-it-off-the-net.tar.gz}
+@end group
+@end example
+
+As a corollary, do not do an incremental restore from an untrusted archive.
+
+@item
+Do not let untrusted users access files extracted from untrusted
+archives without checking first for problems such as setuid programs.
+
+@item
+Do not let untrusted users modify directories that are ancestors of
+top-level arguments of @command{tar}. For example, while you are
+executing @samp{tar -cf /archive/u-home.tar /u/home}, do not let an
+untrusted user modify @file{/}, @file{/archive}, or @file{/u}.
+
+@item
+Pay attention to the diagnostics and exit status of @command{tar}.
+
+@item
+When archiving live file systems, monitor running instances of
+@command{tar} to detect denial-of-service attacks.
+
+@item
+Avoid unusual options such as @option{--absolute-names} (@option{-P}),
+@option{--dereference} (@option{-h}), @option{--overwrite},
+@option{--recursive-unlink}, and @option{--remove-files} unless you
+understand their security implications.
+
+@end itemize
+
+@node Changes
+@appendix Changes
+
+This appendix lists some important user-visible changes between
+version @GNUTAR{} @value{VERSION} and previous versions. An up-to-date
+version of this document is available at
+@uref{http://www.gnu.org/@/software/@/tar/manual/changes.html,the
+@GNUTAR{} documentation page}.
+
+@table @asis
+@item Use of globbing patterns when listing and extracting.
+
+Previous versions of GNU tar assumed shell-style globbing when
+extracting from or listing an archive. For example:
+
+@smallexample
+$ @kbd{tar xf foo.tar '*.c'}
+@end smallexample
+
+would extract all files whose names end in @samp{.c}. This behavior
+was not documented and was incompatible with traditional tar
+implementations. Therefore, starting from version 1.15.91, GNU tar
+no longer uses globbing by default. For example, the above invocation
+is now interpreted as a request to extract from the archive the file
+named @file{*.c}.
+
+To facilitate transition to the new behavior for those users who got
+used to the previous incorrect one, @command{tar} will print a warning
+if it finds out that a requested member was not found in the archive
+and its name looks like a globbing pattern. For example:
+
+@smallexample
+$ @kbd{tar xf foo.tar '*.c'}
+tar: Pattern matching characters used in file names. Please,
+tar: use --wildcards to enable pattern matching, or --no-wildcards to
+tar: suppress this warning.
+tar: *.c: Not found in archive
+tar: Error exit delayed from previous errors
+@end smallexample
+
+To treat member names as globbing patterns, use the @option{--wildcards} option.
+If you want to tar to mimic the behavior of versions prior to 1.15.91,
+add this option to your @env{TAR_OPTIONS} variable.
+
+@xref{wildcards}, for the detailed discussion of the use of globbing
+patterns by @GNUTAR{}.
+
+@item Use of short option @option{-o}.
+
+Earlier versions of @GNUTAR{} understood @option{-o} command line
+option as a synonym for @option{--old-archive}.
+
+@GNUTAR{} starting from version 1.13.90 understands this option as
+a synonym for @option{--no-same-owner}. This is compatible with
+UNIX98 @command{tar} implementations.
+
+However, to facilitate transition, @option{-o} option retains its
+old semantics when it is used with one of archive-creation commands.
+Users are encouraged to use @option{--format=oldgnu} instead.
+
+It is especially important, since versions of @acronym{GNU} Automake
+up to and including 1.8.4 invoke tar with this option to produce
+distribution tarballs. @xref{Formats,v7}, for the detailed discussion
+of this issue and its implications.
+
+@xref{Options, tar-formats, Changing Automake's Behavior,
+automake, GNU Automake}, for a description on how to use various
+archive formats with @command{automake}.
+
+Future versions of @GNUTAR{} will understand @option{-o} only as a
+synonym for @option{--no-same-owner}.
+
+@item Use of short option @option{-l}
+
+Earlier versions of @GNUTAR{} understood @option{-l} option as a
+synonym for @option{--one-file-system}. Since such usage contradicted
+to UNIX98 specification and harmed compatibility with other
+implementations, it was declared deprecated in version 1.14. However,
+to facilitate transition to its new semantics, it was supported by
+versions 1.15 and 1.15.90. The present use of @option{-l} as a short
+variant of @option{--check-links} was introduced in version 1.15.91.
+
+@item Use of options @option{--portability} and @option{--old-archive}
+
+These options are deprecated. Please use @option{--format=v7} instead.
+
+@item Use of option @option{--posix}
+
+This option is deprecated. Please use @option{--format=posix} instead.
+@end table
+
+@node Configuring Help Summary
+@appendix Configuring Help Summary
+
+Running @kbd{tar --help} displays the short @command{tar} option
+summary (@pxref{help}). This summary is organized by @dfn{groups} of
+semantically close options. The options within each group are printed
+in the following order: a short option, eventually followed by a list
+of corresponding long option names, followed by a short description of
+the option. For example, here is an excerpt from the actual @kbd{tar
+--help} output:
+
+@verbatim
+ Main operation mode:
+
+ -A, --catenate, --concatenate append tar files to an archive
+ -c, --create create a new archive
+ -d, --diff, --compare find differences between archive and
+ file system
+ --delete delete from the archive
+@end verbatim
+
+@vrindex ARGP_HELP_FMT, environment variable
+The exact visual representation of the help output is configurable via
+@env{ARGP_HELP_FMT} environment variable. The value of this variable
+is a comma-separated list of @dfn{format variable} assignments. There
+are two kinds of format variables. An @dfn{offset variable} keeps the
+offset of some part of help output text from the leftmost column on
+the screen. A @dfn{boolean} variable is a flag that toggles some
+output feature on or off. Depending on the type of the corresponding
+variable, there are two kinds of assignments:
+
+@table @asis
+@item Offset assignment
+
+The assignment to an offset variable has the following syntax:
+
+@smallexample
+@var{variable}=@var{value}
+@end smallexample
+
+@noindent
+where @var{variable} is the variable name, and @var{value} is a
+numeric value to be assigned to the variable.
+
+@item Boolean assignment
+
+To assign @code{true} value to a variable, simply put this variable name. To
+assign @code{false} value, prefix the variable name with @samp{no-}. For
+example:
+
+@smallexample
+@group
+# Assign @code{true} value:
+dup-args
+# Assign @code{false} value:
+no-dup-args
+@end group
+@end smallexample
+@end table
+
+Following variables are declared:
+
+@deftypevr {Help Output} boolean dup-args
+If true, arguments for an option are shown with both short and long
+options, even when a given option has both forms, for example:
+
+@smallexample
+ -f ARCHIVE, --file=ARCHIVE use archive file or device ARCHIVE
+@end smallexample
+
+If false, then if an option has both short and long forms, the
+argument is only shown with the long one, for example:
+
+@smallexample
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+@end smallexample
+
+@noindent
+and a message indicating that the argument is applicable to both
+forms is printed below the options. This message can be disabled
+using @code{dup-args-note} (see below).
+
+The default is false.
+@end deftypevr
+
+@deftypevr {Help Output} boolean dup-args-note
+If this variable is true, which is the default, the following notice
+is displayed at the end of the help output:
+
+@quotation
+Mandatory or optional arguments to long options are also mandatory or
+optional for any corresponding short options.
+@end quotation
+
+Setting @code{no-dup-args-note} inhibits this message. Normally, only one of
+variables @code{dup-args} or @code{dup-args-note} should be set.
+@end deftypevr
+
+@deftypevr {Help Output} offset short-opt-col
+Column in which short options start. Default is 2.
+
+@smallexample
+@group
+$ @kbd{tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=short-opt-col=6 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+@end group
+@end smallexample
+@end deftypevr
+
+@deftypevr {Help Output} offset long-opt-col
+Column in which long options start. Default is 6. For example:
+
+@smallexample
+@group
+$ @kbd{tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=long-opt-col=16 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+@end group
+@end smallexample
+@end deftypevr
+
+@deftypevr {Help Output} offset doc-opt-col
+Column in which @dfn{doc options} start. A doc option isn't actually
+an option, but rather an arbitrary piece of documentation that is
+displayed in much the same manner as the options. For example, in
+the description of @option{--format} option:
+
+@smallexample
+@group
+ -H, --format=FORMAT create archive of the given format.
+
+ FORMAT is one of the following:
+
+ gnu GNU tar 1.13.x format
+ oldgnu GNU format as per tar <= 1.12
+ pax POSIX 1003.1-2001 (pax) format
+ posix same as pax
+ ustar POSIX 1003.1-1988 (ustar) format
+ v7 old V7 tar format
+@end group
+@end smallexample
+
+@noindent
+the format names are doc options. Thus, if you set
+@kbd{ARGP_HELP_FMT=doc-opt-col=6} the above part of the help output
+will look as follows:
+
+@smallexample
+@group
+ -H, --format=FORMAT create archive of the given format.
+
+ FORMAT is one of the following:
+
+ gnu GNU tar 1.13.x format
+ oldgnu GNU format as per tar <= 1.12
+ pax POSIX 1003.1-2001 (pax) format
+ posix same as pax
+ ustar POSIX 1003.1-1988 (ustar) format
+ v7 old V7 tar format
+@end group
+@end smallexample
+@end deftypevr
+
+@deftypevr {Help Output} offset opt-doc-col
+Column in which option description starts. Default is 29.
+
+@smallexample
+@group
+$ @kbd{tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=opt-doc-col=19 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=opt-doc-col=9 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE
+ use archive file or device ARCHIVE
+@end group
+@end smallexample
+
+@noindent
+Notice, that the description starts on a separate line if
+@code{opt-doc-col} value is too small.
+@end deftypevr
+
+@deftypevr {Help Output} offset header-col
+Column in which @dfn{group headers} are printed. A group header is a
+descriptive text preceding an option group. For example, in the
+following text:
+
+@verbatim
+ Main operation mode:
+
+ -A, --catenate, --concatenate append tar files to
+ an archive
+ -c, --create create a new archive
+@end verbatim
+@noindent
+@samp{Main operation mode:} is the group header.
+
+The default value is 1.
+@end deftypevr
+
+@deftypevr {Help Output} offset usage-indent
+Indentation of wrapped usage lines. Affects @option{--usage}
+output. Default is 12.
+@end deftypevr
+
+@deftypevr {Help Output} offset rmargin
+Right margin of the text output. Used for wrapping.
+@end deftypevr
+
+@node Fixing Snapshot Files
+@appendix Fixing Snapshot Files
+@include tar-snapshot-edit.texi
+
+@node Tar Internals
+@appendix Tar Internals
+@include intern.texi
+
+@node Genfile
+@appendix Genfile
+@include genfile.texi
+
+@node Free Software Needs Free Documentation
+@appendix Free Software Needs Free Documentation
+@include freemanuals.texi
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
@include fdl.texi
+@node Index of Command Line Options
+@appendix Index of Command Line Options
+
+This appendix contains an index of all @GNUTAR{} long command line
+options. The options are listed without the preceding double-dash.
+For a cross-reference of short command line options, see
+@ref{Short Option Summary}.
+
+@printindex op
+
@node Index
@appendix Index