@smallbook
@c %**end of header
-@c ======================================================================
-@c This document has three levels of rendition: PUBLISH, DISTRIB or PROOF,
-@c as decided by @set symbols. The PUBLISH rendition does not show
-@c notes or marks asking for revision. Most users will prefer having more
-@c information, even if this information is not fully revised for adequacy,
-@c so DISTRIB is the default for tar distributions. The PROOF rendition
-@c show all marks to the point of ugliness, but is nevertheless useful to
-@c those working on the manual itself.
-@c ======================================================================
+@c Maintenance notes:
+@c 1. Pay attention to @FIXME{}s and @UNREVISED{}s
+@c 2. Before creating final variant:
+@c 2.1. Run `make check-options' to make sure all options are properly
+@c documented;
+@c 2.2. Run `make master-menu' (see comment before the master menu).
-@ifclear PUBLISH
-@ifclear DISTRIB
-@ifclear PROOF
-@set DISTRIB
-@end ifclear
-@end ifclear
-@end ifclear
-
-@ifset PUBLISH
-@set RENDITION The book, version
-@end ifset
-
-@ifset DISTRIB
-@set RENDITION FTP release, version
-@end ifset
-
-@ifset PROOF
-@set RENDITION Proof reading version
-@end ifset
-
-@c ---------------------------------------------------------------------
-@c The @FIXME's, @UNREVISED and @c comments are part Fran@,{c}ois's work
-@c plan. These annotations are somewhat precious to him; he asks that I
-@c do not alter them inconsiderately. Much work is needed for GNU tar
-@c internals (the sources, the programs themselves). Revising the
-@c adequacy of the manual while revising the sources, and cleaning them
-@c both at the same time, is a good way to proceed.
-@c ---------------------------------------------------------------------
+@include rendition.texi
+@include value.texi
-@c Output marks for nodes needing revision, but not in PUBLISH rendition.
-
-@macro UNREVISED
-@ifclear PUBLISH
-@quotation
-@emph{(This message will disappear, once this node revised.)}
-@end quotation
-@end ifclear
-@end macro
-
-@c Output various FIXME information only in PROOF rendition.
-
-@macro FIXME{string}
-@allow-recursion
-@quote-arg
-@ifset PROOF
-@strong{<FIXME>} \string\ @strong{</>}
-@end ifset
-
-@end macro
-
-@macro FIXME-ref{string}
-@quote-arg
-@ifset PROOF
-@strong{<REF>} \string\ @strong{</>}
-@end ifset
-
-@end macro
-
-@macro FIXME-pxref{string}
-@quote-arg
-@ifset PROOF
-@strong{<PXREF>} \string\ @strong{</>}
-@end ifset
-
-@end macro
-
-@macro FIXME-xref{string}
-@quote-arg
-@ifset PROOF
-@strong{<XREF>} \string\ @strong{</>}
-@end ifset
-
-@end macro
-
-@c @macro option{entry}
-@c @quote-arg
-@c @opindex{--\entry\}
-@c @value{\entry\}
-@c @end macro
-
-@macro GNUTAR
-@acronym{GNU} @command{tar}
-@end macro
-
-@set op-absolute-names @kbd{--absolute-names} (@kbd{-P})
-@set ref-absolute-names @ref{absolute}
-@set xref-absolute-names @xref{absolute}
-@set pxref-absolute-names @pxref{absolute}
-
-@set op-after-date @kbd{--after-date=@var{date}} (@kbd{--newer=@var{date}}, @kbd{-N @var{date}})
-@set ref-after-date @ref{after}
-@set xref-after-date @xref{after}
-@set pxref-after-date @pxref{after}
-
-@set op-append @kbd{--append} (@kbd{-r})
-@set ref-append @ref{add}
-@set xref-append @xref{add}
-@set pxref-append @pxref{add}
-
-@set op-atime-preserve @kbd{--atime-preserve}
-@set ref-atime-preserve @ref{Attributes}
-@set xref-atime-preserve @xref{Attributes}
-@set pxref-atime-preserve @pxref{Attributes}
-
-@set op-backup @kbd{--backup}
-@set ref-backup @ref{Backup options}
-@set xref-backup @xref{Backup options}
-@set pxref-backup @pxref{Backup options}
-
-@set op-block-number @kbd{--block-number} (@kbd{-R})
-@set ref-block-number @ref{verbose}
-@set xref-block-number @xref{verbose}
-@set pxref-block-number @pxref{verbose}
-
-@set op-blocking-factor @kbd{--blocking-factor=@var{512-size}} (@kbd{-b @var{512-size}})
-@set ref-blocking-factor @ref{Blocking Factor}
-@set xref-blocking-factor @xref{Blocking Factor}
-@set pxref-blocking-factor @pxref{Blocking Factor}
-
-@set op-bzip2 @kbd{--bzip2} (@kbd{-j})
-@set ref-bzip2 @ref{gzip}
-@set xref-bzip2 @xref{gzip}
-@set pxref-bzip2 @pxref{gzip}
-
-@set op-check-links @kbd{--check-links} (@kbd{-l})
-@set ref-check-links @ref{--check-links}
-@set xref-check-links @xref{--check-links}
-@set pxref-check-links @pxref{--check-links}
-
-@set op-checkpoint @kbd{--checkpoint}
-@set ref-checkpoint @ref{verbose}
-@set xref-checkpoint @xref{verbose}
-@set pxref-checkpoint @pxref{verbose}
-
-@set op-check-links @kbd{--check-links}
-
-@set op-compare @kbd{--compare} (@kbd{--diff}, @kbd{-d})
-@set ref-compare @ref{compare}
-@set xref-compare @xref{compare}
-@set pxref-compare @pxref{compare}
-
-@set op-compress @kbd{--compress} (@kbd{--uncompress}, @kbd{-Z})
-@set ref-compress @ref{gzip}
-@set xref-compress @xref{gzip}
-@set pxref-compress @pxref{gzip}
-
-@set op-concatenate @kbd{--concatenate} (@kbd{--catenate}, @kbd{-A})
-@set ref-concatenate @ref{concatenate}
-@set xref-concatenate @xref{concatenate}
-@set pxref-concatenate @pxref{concatenate}
-
-@set op-create @kbd{--create} (@kbd{-c})
-@set ref-create @ref{create}
-@set xref-create @xref{create}
-@set pxref-create @pxref{create}
-
-@set op-delete @kbd{--delete}
-@set ref-delete @ref{delete}
-@set xref-delete @xref{delete}
-@set pxref-delete @pxref{delete}
-
-@set op-dereference @kbd{--dereference} (@kbd{-h})
-@set ref-dereference @ref{dereference}
-@set xref-dereference @xref{dereference}
-@set pxref-dereference @pxref{dereference}
-
-@set op-directory @kbd{--directory=@var{directory}} (@kbd{-C @var{directory}})
-@set ref-directory @ref{directory}
-@set xref-directory @xref{directory}
-@set pxref-directory @pxref{directory}
-
-@set op-exclude @kbd{--exclude=@var{pattern}}
-@set ref-exclude @ref{exclude}
-@set xref-exclude @xref{exclude}
-@set pxref-exclude @pxref{exclude}
-
-@set op-exclude-from @kbd{--exclude-from=@var{file-of-patterns}} (@kbd{-X @var{file-of-patterns}})
-@set ref-exclude-from @ref{exclude}
-@set xref-exclude-from @xref{exclude}
-@set pxref-exclude-from @pxref{exclude}
-
-@set op-extract @kbd{--extract} (@kbd{--get}, @kbd{-x})
-@set ref-extract @ref{extract}
-@set xref-extract @xref{extract}
-@set pxref-extract @pxref{extract}
-
-@set op-file @kbd{--file=@var{archive-name}} (@kbd{-f @var{archive-name}})
-@set ref-file @ref{file}
-@set xref-file @xref{file}
-@set pxref-file @pxref{file}
-
-@set op-files-from @kbd{--files-from=@var{file-of-names}} (@kbd{-T @var{file-of-names}})
-@set ref-files-from @ref{files}
-@set xref-files-from @xref{files}
-@set pxref-files-from @pxref{files}
-
-@set op-force-local @kbd{--force-local}
-@set ref-force-local @ref{file}
-@set xref-force-local @xref{file}
-@set pxref-force-local @pxref{file}
-
-@set op-group @kbd{--group=@var{group}}
-@set ref-group @ref{Option Summary}
-@set xref-group @xref{Option Summary}
-@set pxref-group @pxref{Option Summary}
-
-@set op-gzip @kbd{--gzip} (@kbd{--gunzip}, @kbd{--ungzip}, @kbd{-z})
-@set ref-gzip @ref{gzip}
-@set xref-gzip @xref{gzip}
-@set pxref-gzip @pxref{gzip}
-
-@set op-help @kbd{--help}
-@set ref-help @ref{help}
-@set xref-help @xref{help}
-@set pxref-help @pxref{help}
-
-@set op-ignore-failed-read @kbd{--ignore-failed-read}
-@set ref-ignore-failed-read @ref{create options}
-@set xref-ignore-failed-read @xref{create options}
-@set pxref-ignore-failed-read @pxref{create options}
-
-@set op-ignore-zeros @kbd{--ignore-zeros} (@kbd{-i})
-@set ref-ignore-zeros @ref{Reading}
-@set xref-ignore-zeros @xref{Reading}
-@set pxref-ignore-zeros @pxref{Reading}
-
-@set op-incremental @kbd{--incremental} (@kbd{-G})
-@set ref-incremental @ref{Inc Dumps}
-@set xref-incremental @xref{Inc Dumps}
-@set pxref-incremental @pxref{Inc Dumps}
-
-@set op-info-script @kbd{--info-script=@var{script-name}} (@kbd{--new-volume-script=@var{script-name}}, @kbd{-F @var{script-name}})
-@set ref-info-script @ref{Multi-Volume Archives}
-@set xref-info-script @xref{Multi-Volume Archives}
-@set pxref-info-script @pxref{Multi-Volume Archives}
-
-@set op-interactive @kbd{--interactive} (@kbd{-w})
-@set ref-interactive @ref{interactive}
-@set xref-interactive @xref{interactive}
-@set pxref-interactive @pxref{interactive}
-
-@set op-keep-old-files @kbd{--keep-old-files} (@kbd{-k})
-@set ref-keep-old-files @ref{Keep Old Files}
-@set xref-keep-old-files @xref{Keep Old Files}
-@set pxref-keep-old-files @pxref{Keep Old Files}
-
-@set op-keep-newer-files @kbd{--keep-old-files}
-@set ref-keep-newer-files @ref{Keep Newer Files}
-@set xref-keep-newer-files @xref{Keep Newer Files}
-@set pxref-keep-newer-files @pxref{Keep Newer Files}
-
-@set op-label @kbd{--label=@var{archive-label}} (@kbd{-V @var{archive-label}})
-@set ref-label @ref{label}
-@set xref-label @xref{label}
-@set pxref-label @pxref{label}
-
-@set op-list @kbd{--list} (@kbd{-t})
-@set ref-list @ref{list}
-@set xref-list @xref{list}
-@set pxref-list @pxref{list}
-
-@set op-listed-incremental @kbd{--listed-incremental=@var{snapshot-file}} (@kbd{-g @var{snapshot-file}})
-@set ref-listed-incremental @ref{Inc Dumps}
-@set xref-listed-incremental @xref{Inc Dumps}
-@set pxref-listed-incremental @pxref{Inc Dumps}
-
-@set op-mode @kbd{--mode=@var{permissions}}
-@set ref-mode @ref{Option Summary}
-@set xref-mode @xref{Option Summary}
-@set pxref-mode @pxref{Option Summary}
-
-@set op-multi-volume @kbd{--multi-volume} (@kbd{-M})
-@set ref-multi-volume @ref{Multi-Volume Archives}
-@set xref-multi-volume @xref{Multi-Volume Archives}
-@set pxref-multi-volume @pxref{Multi-Volume Archives}
-
-@set op-newer-mtime @kbd{--newer-mtime=@var{date}}
-@set ref-newer-mtime @ref{after}
-@set xref-newer-mtime @xref{after}
-@set pxref-newer-mtime @pxref{after}
-
-@set op-no-recursion @kbd{--no-recursion}
-@set ref-no-recursion @ref{recurse}
-@set xref-no-recursion @xref{recurse}
-@set pxref-no-recursion @pxref{recurse}
-
-@set op-no-same-owner @kbd{--no-same-owner} (@kbd{-o})
-@set ref-no-same-owner @ref{Attributes}
-@set xref-no-same-owner @xref{Attributes}
-@set pxref-no-same-owner @pxref{Attributes}
-
-@set op-no-same-permissions @kbd{--no-same-permissions}
-@set ref-no-same-permissions @ref{Attributes}
-@set xref-no-same-permissions @xref{Attributes}
-@set pxref-no-same-permissions @pxref{Attributes}
-
-@set op-null @kbd{--null}
-@set ref-null @ref{files}
-@set xref-null @xref{files}
-@set pxref-null @pxref{files}
-
-@set op-numeric-owner @kbd{--numeric-owner}
-@set ref-numeric-owner @ref{Attributes}
-@set xref-numeric-owner @xref{Attributes}
-@set pxref-numeric-owner @pxref{Attributes}
-
-@set op-occurrence @kbd{--occurrence}
-@set ref-occurrence @ref{--occurrence}
-@set xref-occurrence @xref{--occurrence}
-@set pxref-occurrence @pxref{--occurrence}
-
-@set op-old-archive @kbd{--old-archive} (@kbd{-o})
-@set ref-old-archive @ref{old}
-@set xref-old-archive @xref{old}
-@set pxref-old-archive @pxref{old}
-
-@set op-one-file-system @kbd{--one-file-system} (@kbd{-l})
-@set ref-one-file-system @ref{one}
-@set xref-one-file-system @xref{one}
-@set pxref-one-file-system @pxref{one}
-
-@set op-overwrite @kbd{--overwrite}
-@set ref-overwrite @ref{Overwrite Old Files}
-@set xref-overwrite @xref{Overwrite Old Files}
-@set pxref-overwrite @pxref{Overwrite Old Files}
-
-@set op-owner @kbd{--owner=@var{user}}
-@set ref-owner @ref{Option Summary}
-@set xref-owner @xref{Option Summary}
-@set pxref-owner @pxref{Option Summary}
-
-@set op-format @kbd{--format}
-@set ref-format @ref{format}
-@set xref-format @xref{format}
-@set pxref-format @pxref{format}
-
-@set op-format-v7 @kbd{--format=v7}
-@set op-format-gnu @kbd{--format=gnu}
-@set op-format-oldgnu @kbd{--format=oldgnu}
-@set op-format-posix @kbd{--format=posix}
-@set op-format-ustar @kbd{--format=ustar}
-
-@set op-posix @kbd{--posix}
-@set ref-posix @ref{posix}
-@set xref-posix @xref{posix}
-@set pxref-posix @pxref{posix}
-
-@set op-preserve @kbd{--preserve}
-@set ref-preserve @ref{Attributes}
-@set xref-preserve @xref{Attributes}
-@set pxref-preserve @pxref{Attributes}
-
-@set op-record-size @kbd{--record-size=@var{size}}
-@set ref-record-size @ref{Blocking}
-@set xref-record-size @xref{Blocking}
-@set pxref-record-size @pxref{Blocking}
-
-@set op-recursive-unlink @kbd{--recursive-unlink}
-@set ref-recursive-unlink @ref{Writing}
-@set xref-recursive-unlink @xref{Writing}
-@set pxref-recursive-unlink @pxref{Writing}
-
-@set op-read-full-records @kbd{--read-full-records} (@kbd{-B})
-@set ref-read-full-records @ref{Blocking}
-@set xref-read-full-records @xref{Blocking}
-@set pxref-read-full-records @pxref{Blocking}
-@c FIXME: or should it be Reading, or Blocking Factor
-
-@set op-remove-files @kbd{--remove-files}
-@set ref-remove-files @ref{Writing}
-@set xref-remove-files @xref{Writing}
-@set pxref-remove-files @pxref{Writing}
-
-@set op-rsh-command @kbd{rsh-command=@var{command}}
-
-@set op-same-order @kbd{--same-order} (@kbd{--preserve-order}, @kbd{-s})
-@set ref-same-order @ref{Scarce}
-@set xref-same-order @xref{Scarce}
-@set pxref-same-order @pxref{Scarce}
-@c FIXME: or should it be Reading, or Attributes?
-
-@set op-same-owner @kbd{--same-owner}
-@set ref-same-owner @ref{Attributes}
-@set xref-same-owner @xref{Attributes}
-@set pxref-same-owner @pxref{Attributes}
-
-@set op-same-permissions @kbd{--same-permissions} (@kbd{--preserve-permissions}, @kbd{-p})
-@set ref-same-permissions @ref{Attributes}
-@set xref-same-permissions @xref{Attributes}
-@set pxref-same-permissions @pxref{Attributes}
-@c FIXME: or should it be Writing?
-
-@set op-show-omitted-dirs @kbd{--show-omitted-dirs}
-@set ref-show-omitted-dirs @ref{verbose}
-@set xref-show-omitted-dirs @xref{verbose}
-@set pxref-show-omitted-dirs @pxref{verbose}
-
-@set op-sparse @kbd{--sparse} (@kbd{-S})
-@set ref-sparse @ref{sparse}
-@set xref-sparse @xref{sparse}
-@set pxref-sparse @pxref{sparse}
-
-@set op-starting-file @kbd{--starting-file=@var{name}} (@kbd{-K @var{name}})
-@set ref-starting-file @ref{Scarce}
-@set xref-starting-file @xref{Scarce}
-@set pxref-starting-file @pxref{Scarce}
-
-@set op-strip-path @kbd{--strip-path}
-@set ref-strip-path @ref{--strip-path}
-@set xref-strip-path @xref{--strip-path}
-@set pxref-strip-path @pxref{--strip-path}
-
-@set op-suffix @kbd{--suffix=@var{suffix}}
-@set ref-suffix @ref{Backup options}
-@set xref-suffix @xref{Backup options}
-@set pxref-suffix @pxref{Backup options}
-
-@set op-tape-length @kbd{--tape-length=@var{1024-size}} (@kbd{-L @var{1024-size}})
-@set ref-tape-length @ref{Using Multiple Tapes}
-@set xref-tape-length @xref{Using Multiple Tapes}
-@set pxref-tape-length @pxref{Using Multiple Tapes}
-
-@set op-to-stdout @kbd{--to-stdout} (@kbd{-O})
-@set ref-to-stdout @ref{Writing}
-@set xref-to-stdout @xref{Writing}
-@set pxref-to-stdout @pxref{Writing}
-
-@set op-totals @kbd{--totals}
-@set ref-totals @ref{verbose}
-@set xref-totals @xref{verbose}
-@set pxref-totals @pxref{verbose}
-
-@set op-touch @kbd{--touch} (@kbd{-m})
-@set ref-touch @ref{Writing}
-@set xref-touch @xref{Writing}
-@set pxref-touch @pxref{Writing}
-
-@set op-unlink-first @kbd{--unlink-first} (@kbd{-U})
-@set ref-unlink-first @ref{Writing}
-@set xref-unlink-first @xref{Writing}
-@set pxref-unlink-first @pxref{Writing}
-
-@set op-update @kbd{--update} (@kbd{-u})
-@set ref-update @ref{update}
-@set xref-update @xref{update}
-@set pxref-update @pxref{update}
-
-@set op-use-compress-prog @kbd{--use-compress-prog=@var{program}}
-@set ref-use-compress-prog @ref{gzip}
-@set xref-use-compress-prog @xref{gzip}
-@set pxref-use-compress-prog @pxref{gzip}
-
-@set op-verbose @kbd{--verbose} (@kbd{-v})
-@set ref-verbose @ref{verbose}
-@set xref-verbose @xref{verbose}
-@set pxref-verbose @pxref{verbose}
-
-@set op-verify @kbd{--verify} (@kbd{-W})
-@set ref-verify @ref{verify}
-@set xref-verify @xref{verify}
-@set pxref-verify @pxref{verify}
-
-@set op-version @kbd{--version}
-@set ref-version @ref{help}
-@set xref-version @xref{help}
-@set pxref-version @pxref{help}
-
-@set op-volno-file @kbd{--volno-file=@var{file-of-number}}
-@set ref-volno-file @ref{Using Multiple Tapes}
-@set xref-volno-file @xref{Using Multiple Tapes}
-@set pxref-volno-file @pxref{Using Multiple Tapes}
+@defcodeindex op
@c Put everything in one index (arbitrarily chosen to be the concept index).
@syncodeindex fn cp
@syncodeindex pg cp
@syncodeindex vr cp
-@defindex op
-@syncodeindex op cp
-
@copying
This manual is for @acronym{GNU} @command{tar} (version
from archives.
Copyright @copyright{} 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2001,
-2003, 2004 Free Software Foundation, Inc.
+2003, 2004, 2005, 2006 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with the
-Invariant Sections being "GNU General Public License", with the
-Front-Cover Texts being ``A GNU Manual,'' and with the Back-Cover Texts
-as in (a) below. A copy of the license is included in the section
-entitled "GNU Free Documentation License".
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,''
+and with the Back-Cover Texts as in (a) below. A copy of the license
+is included in the section entitled "GNU Free Documentation License".
(a) The FSF's Back-Cover Text is: ``You are free to copy and modify
this GNU Manual. Buying copies from GNU Press supports the FSF in
@titlepage
@title @acronym{GNU} tar: an archiver tool
@subtitle @value{RENDITION} @value{VERSION}, @value{UPDATED}
-@author Melissa Weisshaus, Jay Fenlason,
-@author Thomas Bushnell, n/BSG, Amy Gorin
-@c he said to remove it: Fran@,{c}ois Pinard
-@c i'm thinking about how the author page *should* look. -mew 2may96
+@author John Gilmore, Jay Fenlason et al.
@page
@vskip 0pt plus 1filll
document. The rest of the menu lists all the lower level nodes.
@end ifnottex
-@c The master menu, created with texinfo-master-menu, goes here.
-@c (However, getdate.texi's menu is interpolated by hand.)
+@c The master menu goes here.
+@c
+@c NOTE: To update it from within Emacs, make sure mastermenu.el is
+@c loaded and run texinfo-master-menu.
+@c To update it from the command line, run
+@c
+@c make master-menu
@menu
* Introduction::
* Date input formats::
* Formats::
* Media::
+
+Appendices
+
+* Changes::
+* Configuring Help Summary::
+* Tar Internals::
+* Genfile::
* Free Software Needs Free Documentation::
* Copying This Manual::
+* Index of Command Line Options::
* Index::
@detailmenu
* Definitions:: Some Definitions
* What tar Does:: What @command{tar} Does
* Naming tar Archives:: How @command{tar} Archives are Named
-* Current status:: Current development status of @GNUTAR{}
* Authors:: @GNUTAR{} Authors
* Reports:: Reporting bugs or suggestions
* extracting archives::
* extracting files::
* extract dir::
+* extracting untrusted archives::
* failing commands::
Invoking @GNUTAR{}
* Styles::
* All Options::
* help::
+* defaults::
* verbose::
* interactive::
The Three Option Styles
-* Mnemonic Options:: Mnemonic Option Style
+* Long Options:: Long Option Style
* Short Options:: Short Option Style
* Old Options:: Old Option Style
* Mixing:: Mixing Option Styles
* delete::
* compare::
-How to Add Files to Existing Archives: @code{--append}
+How to Add Files to Existing Archives: @option{--append}
* appending files:: Appending Files to an Archive
* multiple::
* how to update::
-Options Used by @code{--create}
+Options Used by @option{--create}
+* override:: Overriding File Metadata.
* Ignore Failed Read::
-Options Used by @code{--extract}
+Options Used by @option{--extract}
* Reading:: Options to Help Read Archives
* Writing:: Changing How @command{tar} Writes Files
* Keep Newer Files::
* Unlink First::
* Recursive Unlink::
-* Modification Times::
+* Data Modification Times::
* Setting Access Permissions::
+* Directory Modification Times and Permissions::
* Writing to Standard Output::
+* Writing to an External Program::
* remove files::
Coping with Scarce Resources
Performing Backups and Restoring Files
* Full Dumps:: Using @command{tar} to Perform Full Dumps
-* Inc Dumps:: Using @command{tar} to Perform Incremental Dumps
-* incremental and listed-incremental:: The Incremental Options
+* Incremental Dumps:: Using @command{tar} to Perform Incremental Dumps
* Backup Levels:: Levels of Backups
* Backup Parameters:: Setting Parameters for Backups and Restoration
* Scripted Backups:: Using the Backup Scripts
* Selecting Archive Members::
* files:: Reading Names from a File
* exclude:: Excluding Some Files
-* Wildcards::
+* wildcards:: Wildcards Patterns and Matching
+* quoting styles:: Ways of Quoting Special Characters in Names
+* transform:: Modifying File and Member Names
* after:: Operating Only on New Files
* recurse:: Descending into Directories
-* one:: Crossing Filesystem Boundaries
+* one:: Crossing File System Boundaries
Reading Names from a File
Excluding Some Files
-* controlling pattern-patching with exclude::
* problems with exclude::
-Crossing Filesystem Boundaries
+Wildcards Patterns and Matching
+
+* controlling pattern-matching::
+
+Crossing File System Boundaries
* directory:: Changing Directory
* absolute:: Absolute File Names
* General date syntax:: Common rules.
* Calendar date items:: 19 Dec 1994.
* Time of day items:: 9:20pm.
-* Time zone items:: @sc{est}, @sc{pdt}, @sc{gmt}, ...
+* Time zone items:: @sc{est}, @sc{pdt}, @sc{gmt}.
* Day of week items:: Monday and others.
* Relative items in date strings:: next tuesday, 2 years ago.
* Pure numbers in date strings:: 19931219, 1440.
* Seconds since the Epoch:: @@1078100502.
+* Specifying time zone rules:: TZ="America/New_York", TZ="UTC0".
* Authors of get_date:: Bellovin, Eggert, Salz, Berets, et al.
Controlling the Archive Format
* Portability:: Making @command{tar} Archives More Portable
* Compression:: Using Less Space through Compression
* Attributes:: Handling File Attributes
-* Standard:: The Standard Format
-* Extensions:: @acronym{GNU} Extensions to the Archive Format
* cpio:: Comparison of @command{tar} and @command{cpio}
Making @command{tar} Archives More Portable
* Portable Names:: Portable Names
* dereference:: Symbolic Links
* old:: Old V7 Archives
+* ustar:: Ustar Archives
+* gnu:: GNU and old GNU format archives.
* posix:: @acronym{POSIX} archives
* Checksumming:: Checksumming Problems
* Large or Negative Values:: Large files, negative time stamps, etc.
+* Other Tars:: How to Extract GNU-Specific Data Using
+ Other @command{tar} Implementations
+
+@GNUTAR{} and @acronym{POSIX} @command{tar}
+
+* PAX keywords:: Controlling Extended Header Keywords.
+
+How to Extract GNU-Specific Data Using Other @command{tar} Implementations
+
+* Split Recovery:: Members Split Between Volumes
+* Sparse Recovery:: Sparse Members
Using Less Space through Compression
* Multi-Volume Archives:: Archives Longer than One Tape or Disk
* Tape Files:: Tape Files
+* Tarcat:: Concatenate Volumes into a Single Archive
+
+
+Tar Internals
+
+* Standard:: Basic Tar Format
+* Extensions:: @acronym{GNU} Extensions to the Archive Format
+* Sparse Formats:: Storing Sparse Files
+* Snapshot Files::
+* Dumpdir::
+
+Storing Sparse Files
+
+* Old GNU Format::
+* PAX 0:: PAX Format, Versions 0.0 and 0.1
+* PAX 1:: PAX Format, Version 1.0
+
+Genfile
+
+* Generate Mode:: File Generation Mode.
+* Status Mode:: File Status Mode.
+* Exec Mode:: Synchronous Execution mode.
Copying This Manual
* Definitions:: Some Definitions
* What tar Does:: What @command{tar} Does
* Naming tar Archives:: How @command{tar} Archives are Named
-* Current status:: Current development status of @GNUTAR{}
* Authors:: @GNUTAR{} Authors
* Reports:: Reporting bugs or suggestions
@end menu
archives. An @dfn{archive} is a single file which contains the contents
of many files, while still identifying the names of the files, their
owner(s), and so forth. (In addition, archives record access
-permissions, user and group, size in bytes, and last modification time.
+permissions, user and group, size in bytes, and data modification time.
Some archives also record the file names in each archived directory, as
well as other file and directory information.) You can use @command{tar}
to @dfn{create} a new archive in a specified directory.
manual, we use the term @dfn{file} to refer only to files accessible in
the normal ways (by @command{ls}, @command{cat}, and so forth), and the term
@dfn{member} to refer only to the members of an archive. Similarly, a
-@dfn{file name} is the name of a file, as it resides in the filesystem,
+@dfn{file name} is the name of a file, as it resides in the file system,
and a @dfn{member name} is the name of an archive member within the
archive.
@cindex extraction
@cindex unpacking
The term @dfn{extraction} refers to the process of copying an archive
-member (or multiple members) into a file in the filesystem. Extracting
+member (or multiple members) into a file in the file system. Extracting
all the members of an archive is often called @dfn{extracting the
archive}. The term @dfn{unpack} can also be used to refer to the
extraction of many or all the members of an archive. Extracting an
direct its output to available devices, files, or other programs (using
pipes). @command{tar} may even access remote devices or files (as archives).
-@FIXME{the following table entries need a bit of work..}
-
You can use @command{tar} archives in many ways. We want to stress a few
of them: storage, backup, and transportation.
+@FIXME{the following table entries need a bit of work.}
@table @asis
@item Storage
Often, @command{tar} archives are used to store related files for
accidental destruction of the information in those files.
@GNUTAR{} has special features that allow it to be
used to make incremental and full dumps of all the files in a
-filesystem.
+file system.
@item Transportation
You can create an archive on one system, transfer it to another system,
this manual, we consistently refer to ``archives'' and ``archive
members'' to make learning to use @command{tar} easier for novice users.
-@node Current status
-@section Current development status of @GNUTAR{}
-
-@GNUTAR{} is currently in the process of active development, whose
-primary aims are:
-
-@itemize @bullet
-@item Improve compatibility between @GNUTAR{} and other @command{tar}
-implementations.
-@item Switch to using @acronym{POSIX} archives.
-@item Revise sparse file handling and multiple volume processing.
-@item Merge with the @acronym{GNU} @code{paxutils} project.
-@end itemize
-
-Some of these aims are already attained, while others are still
-being worked upon. From the point of view of an end user, the
-following issues need special mentioning:
-
-@table @asis
-@item Use of short option @option{-o}.
-
-Earlier versions of @GNUTAR{} understood @option{-o} command line
-option as a synonym for @option{--old-archive}.
-
-@GNUTAR{} starting from version 1.13.90 understands this option as
-a synonym for @option{--no-same-owner}. This is compatible with
-UNIX98 @command{tar} implementations.
-
-However, to facilitate transition, @option{-o} option retains its
-old semantics when it is used with one of archive-creation commands.
-Users are encouraged to use @value{op-format-oldgnu} instead.
-
-It is especially important, since versions of @acronym{GNU} Automake
-up to and including 1.8.4 invoke tar with this option to produce
-distribution tarballs. @xref{Formats,v7}, for the detailed discussion
-of this issue and its implications.
-
-Future versions of @GNUTAR{} will understand @option{-o} only as a
-synonym for @option{--no-same-owner}.
-
-@item Use of short option @option{-l}
-
-Earlier versions of @GNUTAR{} understood @option{-l} option as a
-synonym for @samp{--one-file-system}. Such usage is deprecated.
-For compatibility with other implementations future versions of
-@GNUTAR{} will understand this option as a synonym for
-@option{--check-links}.
-
-@item Use of options @option{--portability} and @option{--old-archive}
-
-These options are deprecated. Please use @option{--format=v7} instead.
-
-@item Use of option @option{--posix}
-
-This option is deprecated. Please use @option{--format=posix} instead.
-@end table
-
@node Authors
@section @GNUTAR{} Authors
Fran@,{c}ois Pinard put version 1.11.8 of the manual together by
taking information from all these sources and merging them. Melissa
Weisshaus finally edited and redesigned the book to create version
-1.12. @FIXME{update version number as necessary; i'm being
-optimistic!} @FIXME{Someone [maybe karl berry? maybe bob chassell?
-maybe melissa? maybe julie sussman?] needs to properly index the
-thing.}
+1.12. The book for versions from 1.14 up to @value{VERSION} were edited
+by the current maintainer, Sergey Poznyakoff.
For version 1.12, Daniel Hagerty contributed a great deal of technical
consulting. In particular, he is the primary author of @ref{Backups}.
-In July, 2003 @GNUTAR{} was put on CVS at @url{savannah.gnu.org}, and
-an active development and maintenance work has started
-again. Currently @GNUTAR{} is being maintained by Paul Eggert, Sergey
+In July, 2003 @GNUTAR{} was put on CVS at savannah.gnu.org
+(see @url{http://savannah.gnu.org/projects/tar}), and
+active development and maintenance work has started
+again. Currently @GNUTAR{} is being maintained by Paul Eggert, Sergey
Poznyakoff and Jeff Bailey.
Support for @acronym{POSIX} archives was added by Sergey Poznyakoff.
please report them to @file{bug-tar@@gnu.org}.
When reporting a bug, please be sure to include as much detail as
-possible, in order to reproduce it. @FIXME{Be more specific, I'd
+possible, in order to reproduce it. @FIXME{Be more specific, I'd
like to make this node as detailed as 'Bug reporting' node in Emacs
manual}.
@chapter Tutorial Introduction to @command{tar}
This chapter guides you through some basic examples of three @command{tar}
-operations: @samp{--create}, @samp{--list}, and @samp{--extract}. If
+operations: @option{--create}, @option{--list}, and @option{--extract}. If
you already know how to use some other version of @command{tar}, then you
may not need to read this chapter. This chapter omits most complicated
details about how @command{tar} works.
use some basic utilities. For example, you should know how to create,
list, copy, rename, edit, and delete files and directories; how to
change between directories; and how to figure out where you are in the
-filesystem. You should have some basic understanding of directory
+file system. You should have some basic understanding of directory
structure and how files are named according to which directory they are
in. You should understand concepts such as standard output and standard
input, what various definitions of the term ``argument'' mean, and the
at the end}We will indicate those abbreviations appropriately to get
you used to seeing them. (Note that the ``old style'' option forms
exist in @GNUTAR{} for compatibility with Unix
-@command{tar}. We present a full discussion of this way of writing
-options and operations appears in @ref{Old Options}, and we discuss
-the other two styles of writing options in @ref{Mnemonic Options}, and
-@ref{Short Options}.)
+@command{tar}. In this book we present a full discussion of this way
+of writing options and operations (@pxref{Old Options}), and we discuss
+the other two styles of writing options (@xref{Long Options}, and
+@pxref{Short Options}).
In the examples and in the text of this tutorial, we usually use the
long forms of operations and options; but the ``short'' forms produce
two different ways. People sometimes refer to @command{tar} ``commands''.
A @command{tar} @dfn{command} is the entire command line of user input
which tells @command{tar} what to do --- including the operation, options,
-and any arguments (file names, pipes, other commands, etc). However,
+and any arguments (file names, pipes, other commands, etc.). However,
you will also sometimes hear the term ``the @command{tar} command''. When
the word ``command'' is used specifically like this, a person is usually
referring to the @command{tar} @emph{operation}, not the whole line.
this chapter will cover how to use these operations in detail. We will
present the rest of the operations in the next chapter.
-@table @kbd
+@table @option
@item --create
@itemx -c
Create a new @command{tar} archive.
To understand how to run @command{tar} in the three operating modes listed
previously, you also need to understand how to use two of the options to
-@command{tar}: @samp{--file} (which takes an archive file as an argument)
-and @samp{--verbose}. (You are usually not @emph{required} to specify
+@command{tar}: @option{--file} (which takes an archive file as an argument)
+and @option{--verbose}. (You are usually not @emph{required} to specify
either of these options when you run @command{tar}, but they can be very
useful in making things more clear and helping you avoid errors.)
@end menu
@node file tutorial
-@unnumberedsubsec The @samp{--file} Option
+@unnumberedsubsec The @option{--file} Option
-@table @kbd
+@table @option
+@xopindex{file, tutorial}
@item --file=@var{archive-name}
@itemx -f @var{archive-name}
Specify the name of an archive file.
@end table
-You can specify an argument for the @value{op-file} option whenever you
+You can specify an argument for the @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) option whenever you
use @command{tar}; this option determines the name of the archive file
that @command{tar} will work on.
-If you don't specify this argument, then @command{tar} will use a
-default, usually some physical tape drive attached to your machine.
-If there is no tape drive attached, or the default is not meaningful,
-then @command{tar} will print an error message. The error message might
-look roughly like one of the following:
+@vrindex TAPE
+If you don't specify this argument, then @command{tar} will examine
+the environment variable @env{TAPE}. If it is set, its value will be
+used as the archive name. Otherwise, @command{tar} will use the
+default archive, determined at the compile time. Usually it is
+standard output or some physical tape drive attached to your machine
+(you can verify what the default is by running @kbd{tar
+--show-defaults}, @pxref{defaults}). If there is no tape drive
+attached, or the default is not meaningful, then @command{tar} will
+print an error message. The error message might look roughly like one
+of the following:
@smallexample
tar: can't open /dev/rmt8 : No such device or address
@noindent
To avoid confusion, we recommend that you always specify an archive file
-name by using @value{op-file} when writing your @command{tar} commands.
-For more information on using the @value{op-file} option, see
+name by using @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) when writing your @command{tar} commands.
+For more information on using the @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) option, see
@ref{file}.
@node verbose tutorial
-@unnumberedsubsec The @samp{--verbose} Option
+@unnumberedsubsec The @option{--verbose} Option
-@table @kbd
+@table @option
+@xopindex{verbose, introduced}
@item --verbose
@itemx -v
Show the files being worked on as @command{tar} is running.
@end table
-@value{op-verbose} shows details about the results of running
+@option{--verbose} (@option{-v}) shows details about the results of running
@command{tar}. This can be especially useful when the results might not be
obvious. For example, if you want to see the progress of @command{tar} as
-it writes files into the archive, you can use the @samp{--verbose}
+it writes files into the archive, you can use the @option{--verbose}
option. In the beginning, you may find it useful to use
-@samp{--verbose} at all times; when you are more accustomed to
+@option{--verbose} at all times; when you are more accustomed to
@command{tar}, you will likely want to use it at certain times but not at
-others. We will use @samp{--verbose} at times to help make something
+others. We will use @option{--verbose} at times to help make something
clear, and we will give many examples both using and not using
-@samp{--verbose} to show the differences.
+@option{--verbose} to show the differences.
+
+Each instance of @option{--verbose} on the command line increases the
+verbosity level by one, so if you need more details on the output,
+specify it twice.
-Sometimes, a single instance of @samp{--verbose} on the command line
-will show a full, @samp{ls} style listing of an archive or files,
-@c FIXME: Describe the exact output format, e.g., how hard links are displayed.
-giving sizes, owners, and similar information. Other times,
-@samp{--verbose} will only show files or members that the particular
-operation is operating on at the time. In the latter case, you can
-use @samp{--verbose} twice in a command to get a listing such as that
-in the former case. For example, instead of saying
+When reading archives (@option{--list}, @option{--extract},
+@option{--diff}), @command{tar} by default prints only the names of
+the members being extracted. Using @option{--verbose} will show a full,
+@command{ls} style member listing.
+
+In contrast, when writing archives (@option{--create}, @option{--append},
+@option{--update}), @command{tar} does not print file names by
+default. So, a single @option{--verbose} option shows the file names
+being added to the archive, while two @option{--verbose} options
+enable the full listing.
+
+For example, to create an archive in verbose mode:
@smallexample
-@kbd{tar -cvf afiles.tar apple angst aspic}
+$ @kbd{tar -cvf afiles.tar apple angst aspic}
+apple
+angst
+aspic
@end smallexample
@noindent
-above, you might say
+Creating the same archive with the verbosity level 2 could give:
@smallexample
-@kbd{tar -cvvf afiles.tar apple angst aspic}
+$ @kbd{tar -cvvf afiles.tar apple angst aspic}
+-rw-r--r-- gray/staff 62373 2006-06-09 12:06 apple
+-rw-r--r-- gray/staff 11481 2006-06-09 12:06 angst
+-rw-r--r-- gray/staff 23152 2006-06-09 12:06 aspic
@end smallexample
@noindent
@noindent
Note that you must double the hyphens properly each time.
-Later in the tutorial, we will give examples using @w{@samp{--verbose
+Later in the tutorial, we will give examples using @w{@option{--verbose
--verbose}}.
+@anchor{verbose member listing}
+The full output consists of six fields:
+
+@itemize @bullet
+@item File type and permissions in symbolic form.
+These are displayed in the same format as the first column of
+@command{ls -l} output (@pxref{What information is listed,
+format=verbose, Verbose listing, fileutils, GNU file utilities}).
+
+@item Owner name and group separated by a slash character.
+If these data are not available (for example, when listing a @samp{v7} format
+archive), numeric ID values are printed instead.
+
+@item Size of the file, in bytes.
+
+@item File modification date in ISO 8601 format.
+
+@item File modification time.
+
+@item File name.
+If the name contains any special characters (white space, newlines,
+etc.) these are displayed in an unambiguous form using so called
+@dfn{quoting style}. For the detailed discussion of available styles
+and on how to use them, see @ref{quoting styles}.
+
+Depending on the file type, the name can be followed by some
+additional information, described in the following table:
+
+@table @samp
+@item -> @var{link-name}
+The file or archive member is a @dfn{symbolic link} and
+@var{link-name} is the name of file it links to.
+
+@item link to @var{link-name}
+The file or archive member is a @dfn{hard link} and @var{link-name} is
+the name of file it links to.
+
+@item --Long Link--
+The archive member is an old GNU format long link. You will normally
+not encounter this.
+
+@item --Long Name--
+The archive member is an old GNU format long name. You will normally
+not encounter this.
+
+@item --Volume Header--
+The archive member is a GNU @dfn{volume header} (@pxref{Tape Files}).
+
+@item --Continued at byte @var{n}--
+Encountered only at the beginning of a multi-volume archive
+(@pxref{Using Multiple Tapes}). This archive member is a continuation
+from the previous volume. The number @var{n} gives the offset where
+the original file was split.
+
+@item unknown file type @var{c}
+An archive member of unknown type. @var{c} is the type character from
+the archive header. If you encounter such a message, it means that
+either your archive contains proprietary member types @GNUTAR{} is not
+able to handle, or the archive is corrupted.
+@end table
+
+@end itemize
+
+For example, here is an archive listing containing most of the special
+suffixes explained above:
+
+@smallexample
+@group
+V--------- 0/0 1536 2006-06-09 13:07 MyVolume--Volume Header--
+-rw-r--r-- gray/staff 456783 2006-06-09 12:06 aspic--Continued at
+byte 32456--
+-rw-r--r-- gray/staff 62373 2006-06-09 12:06 apple
+lrwxrwxrwx gray/staff 0 2006-06-09 13:01 angst -> apple
+-rw-r--r-- gray/staff 35793 2006-06-09 12:06 blues
+hrw-r--r-- gray/staff 0 2006-06-09 12:06 music link to blues
+@end group
+@end smallexample
+
+@smallexample
+@end smallexample
+
@node help tutorial
-@unnumberedsubsec Getting Help: Using the @code{--help} Option
+@unnumberedsubsec Getting Help: Using the @option{--help} Option
-@table @kbd
+@table @option
+@opindex help
@item --help
-The @samp{--help} option to @command{tar} prints out a very brief list of
+The @option{--help} option to @command{tar} prints out a very brief list of
all operations and option available for the current version of
@command{tar} available on your system.
@end table
@section How to Create Archives
@UNREVISED
-One of the basic operations of @command{tar} is @value{op-create}, which
+@cindex Creation of the archive
+@cindex Archive, creation of
+One of the basic operations of @command{tar} is @option{--create} (@option{-c}), which
you use to create a @command{tar} archive. We will explain
-@samp{--create} first because, in order to learn about the other
+@option{--create} first because, in order to learn about the other
operations, you will find it useful to have an archive available to
practice on.
@file{blues}, @file{folk}, and @file{jazz}. The archive is called
@file{collection.tar}.
-This section will proceed slowly, detailing how to use @samp{--create}
+This section will proceed slowly, detailing how to use @option{--create}
in @code{verbose} mode, and showing examples using both short and long
forms. In the rest of the tutorial, and in the examples in the next
chapter, we will proceed at a slightly quicker pace. This section
working directory with the archive name you intend to use (in this case,
@samp{collection.tar}), or that you don't care about its contents.
Whenever you use @samp{create}, @command{tar} will erase the current
-contents of the file named by @value{op-file} if it exists. @command{tar}
+contents of the file named by @option{--file=@var{archive-name}} (@option{-f @var{archive-name}}) if it exists. @command{tar}
will not tell you if you are about to overwrite an archive unless you
-specify an option which does this. @FIXME{xref to the node for
---backup!}To add files to an existing archive, you need to use a
-different option, such as @value{op-append}; see @ref{append} for
-information on how to do this.
+specify an option which does this (@pxref{backup}, for the
+information on how to do so). To add files to an existing archive,
+you need to use a different option, such as @option{--append} (@option{-r}); see
+@ref{append} for information on how to do this.
@node Creating the archive
@subsection Creating the Archive
+@xopindex{create, introduced}
To place the files @file{blues}, @file{folk}, and @file{jazz} into an
archive named @file{collection.tar}, use the following command:
easiest to understand (and we encourage you to do the same when you use
@command{tar}, to avoid errors).
-Note that the part of the command which says,
-@w{@kbd{--file=collection.tar}} is considered to be @emph{one} argument.
+Note that the sequence
+@option{--file=@-collection.tar} is considered to be @emph{one} argument.
If you substituted any other string of characters for
@kbd{collection.tar}, then that string would become the name of the
archive file you create.
into the habit of typing options in the order that makes inherent sense.
@xref{short create}, for more information on this.
-In this example, you type the command as shown above: @samp{--create}
+In this example, you type the command as shown above: @option{--create}
is the operation which creates the new archive
-(@file{collection.tar}), and @samp{--file} is the option which lets
+(@file{collection.tar}), and @option{--file} is the option which lets
you give it the name you chose. The files, @file{blues}, @file{folk},
and @file{jazz}, are now members of the archive, @file{collection.tar}
-(they are @dfn{file name arguments} to the @samp{--create} operation).
-@FIXME{xref here to the discussion of file name args?}Now that they are
+(they are @dfn{file name arguments} to the @option{--create} operation.
+@xref{Choosing}, for the detailed discussion on these.) Now that they are
in the archive, they are called @emph{archive members}, not files.
(@pxref{Definitions,members}).
want placed in the archive. If you do not specify any archive
members, @GNUTAR{} will complain.
-If you now list the contents of the working directory (@kbd{ls}), you will
+If you now list the contents of the working directory (@command{ls}), you will
find the archive file listed as well as the files you saw previously:
@smallexample
will complain. You must have write access to the working directory,
or else you will not be able to create an archive in that directory.
-@emph{Caution}: Do not attempt to use @value{op-create} to add files to
+@emph{Caution}: Do not attempt to use @option{--create} (@option{-c}) to add files to
an existing archive; it will delete the archive and write a new one.
-Use @value{op-append} instead. @xref{append}.
+Use @option{--append} (@option{-r}) instead. @xref{append}.
@node create verbose
-@subsection Running @samp{--create} with @samp{--verbose}
+@subsection Running @option{--create} with @option{--verbose}
-If you include the @value{op-verbose} option on the command line,
+@xopindex{create, using with @option{--verbose}}
+@xopindex{verbose, using with @option{--create}}
+If you include the @option{--verbose} (@option{-v}) option on the command line,
@command{tar} will list the files it is acting on as it is working. In
verbose mode, the @code{create} example above would appear as:
@end smallexample
This example is just like the example we showed which did not use
-@samp{--verbose}, except that @command{tar} generated the remaining lines
+@option{--verbose}, except that @command{tar} generated the remaining lines
@iftex
(note the different font styles).
@end iftex
@node short create
@subsection Short Forms with @samp{create}
-As we said before, the @value{op-create} operation is one of the most
+As we said before, the @option{--create} (@option{-c}) operation is one of the most
basic uses of @command{tar}, and you will use it countless times.
Eventually, you will probably want to use abbreviated (or ``short'')
forms of options. A full discussion of the three different forms that
options can take appears in @ref{Styles}; for now, here is what the
-previous example (including the @value{op-verbose} option) looks like
+previous example (including the @option{--verbose} (@option{-v}) option) looks like
using short option forms:
@smallexample
@noindent
In this case, @command{tar} will make an archive file called @file{v},
containing the files @file{blues}, @file{folk}, and @file{jazz}, because
-the @samp{v} is the closest ``file name'' to the @samp{-f} option, and
+the @samp{v} is the closest ``file name'' to the @option{-f} option, and
is thus taken to be the chosen archive file name. @command{tar} will try
to add a file called @file{collection.tar} to the @file{v} archive file;
if the file @file{collection.tar} did not already exist, @command{tar} will
report an error indicating that this file does not exist. If the file
@file{collection.tar} does already exist (e.g., from a previous command
you may have run), then @command{tar} will add this file to the archive.
-Because the @samp{-v} option did not get registered, @command{tar} will not
+Because the @option{-v} option did not get registered, @command{tar} will not
run under @samp{verbose} mode, and will not report its progress.
The end result is that you may be quite confused about what happened,
@noindent
It would be very easy to put the wrong string of characters
-immediately following the @samp{-f}, but doing that could sacrifice
+immediately following the @option{-f}, but doing that could sacrifice
valuable data.
For this reason, we recommend that you pay very careful attention to
especially when using short option forms. Not having the option name
written out mnemonically can affect how well you remember which option
does what, and therefore where different names have to be placed.
-(Placing options in an unusual order can also cause @command{tar} to
-report an error if you have set the shell environment variable
-@env{POSIXLY_CORRECT}.)
@node create dir
@subsection Archiving Directories
@noindent
This will put you into the directory which contains @file{practice},
-i.e. your home directory. Once in the superior directory, you can
+i.e., your home directory. Once in the superior directory, you can
specify the subdirectory, @file{practice}, as a file name argument. To
store @file{practice} in the new archive file @file{music.tar}, type:
write access to the superior directory itself, not only the directory
you are trying archive with @command{tar}. For example, you will probably
not be able to store your home directory in an archive by invoking
-@command{tar} from the root directory; @value{xref-absolute-names}. (Note
+@command{tar} from the root directory; @xref{absolute}. (Note
also that @file{collection.tar}, the original archive file, has itself
been archived. @command{tar} will accept any file as a file to be
archived, regardless of its content. When @file{music.tar} is
it. (It makes no sense to put an archive into itself.) @GNUTAR{}
will continue in this case, and create the archive
normally, except for the exclusion of that one file. (@emph{Please
-note:} Other versions of @command{tar} are not so clever; they will
-enter an infinite loop when this happens, so you should not depend on
-this behavior unless you are certain you are running @GNUTAR{}.)
- @FIXME{bob doesn't like this sentence, since he does
-it all the time, and we've been doing it in the editing passes for
-this manual: In general, make sure that the archive is not inside a
-directory being dumped.}
+note:} Other implementations of @command{tar} may not be so clever;
+they will enter an infinite loop when this happens, so you should not
+depend on this behavior unless you are certain you are running
+@GNUTAR{}. In general, it is wise to always place the archive outside
+of the directory being dumped.
@node list
@section How to List Archives
+@opindex list
Frequently, you will find yourself wanting to determine exactly what a
-particular archive contains. You can use the @value{op-list} operation
-to get the member names as they currently appear in the archive, as well
-as various attributes of the files at the time they were archived. For
-example, you can examine the archive @file{collection.tar} that you
-created in the last section with the command,
+particular archive contains. You can use the @option{--list}
+(@option{-t}) operation to get the member names as they currently
+appear in the archive, as well as various attributes of the files at
+the time they were archived. For example, you can examine the archive
+@file{collection.tar} that you created in the last section with the
+command,
@smallexample
$ @kbd{tar --list --file=collection.tar}
jazz
@end smallexample
-@FIXME{we hope this will change. if it doesn't, need to show the
-creation of bfiles somewhere above!!! : }
-
@noindent
The archive @file{bfiles.tar} would list as follows:
@end smallexample
@noindent
-Be sure to use a @value{op-file} option just as with @value{op-create}
-to specify the name of the archive.
+Be sure to use a @option{--file=@var{archive-name}} (@option{-f
+@var{archive-name}}) option just as with @option{--create}
+(@option{-c}) to specify the name of the archive.
-If you use the @value{op-verbose} option with @samp{--list}, then
-@command{tar} will print out a listing reminiscent of @w{@samp{ls -l}},
-showing owner, file size, and so forth.
+@xopindex{list, using with @option{--verbose}}
+@xopindex{verbose, using with @option{--list}}
+If you use the @option{--verbose} (@option{-v}) option with
+@option{--list}, then @command{tar} will print out a listing
+reminiscent of @w{@samp{ls -l}}, showing owner, file size, and so
+forth. This output is described in detail in @ref{verbose member listing}.
-If you had used @value{op-verbose} mode, the example above would look
-like:
+If you had used @option{--verbose} (@option{-v}) mode, the example
+above would look like:
@smallexample
$ @kbd{tar --list --verbose --file=collection.tar folk}
--rw-rw-rw- myself user 62 1990-05-23 10:55 folk
+-rw-r--r-- myself user 62 1990-05-23 10:55 folk
+@end smallexample
+
+@cindex listing member and file names
+@anchor{listing member and file names}
+It is important to notice that the output of @kbd{tar --list
+--verbose} does not necessarily match that produced by @kbd{tar
+--create --verbose} while creating the archive. It is because
+@GNUTAR{}, unless told explicitly not to do so, removes some directory
+prefixes from file names before storing them in the archive
+(@xref{absolute}, for more information). In other
+words, in verbose mode @GNUTAR{} shows @dfn{file names} when creating
+an archive and @dfn{member names} when listing it. Consider this
+example:
+
+@smallexample
+@group
+$ @kbd{tar cfv archive /etc/mail}
+tar: Removing leading `/' from member names
+/etc/mail/
+/etc/mail/sendmail.cf
+/etc/mail/aliases
+$ @kbd{tar tf archive}
+etc/mail/
+etc/mail/sendmail.cf
+etc/mail/aliases
+@end group
@end smallexample
-@cindex File name arguments, using @code{--list} with
-@cindex @code{--list} with file name arguments
+@opindex show-stored-names
+ This default behavior can sometimes be inconvenient. You can force
+@GNUTAR{} show member names when creating archive by supplying
+@option{--show-stored-names} option.
+
+@table @option
+@item --show-stored-names
+Print member (as opposed to @emph{file}) names when creating the archive.
+@end table
+
+@cindex File name arguments, using @option{--list} with
+@xopindex{list, using with file name arguments}
You can specify one or more individual member names as arguments when
using @samp{list}. In this case, @command{tar} will only list the
names of members you identify. For example, @w{@kbd{tar --list
--file=afiles.tar apple}} would only print @file{apple}.
-@FIXME{we hope the relevant aspects of this will change:}Because
-@command{tar} preserves paths, file names must be specified as they appear
-in the archive (ie., relative to the directory from which the archive
-was created). Therefore, it is essential when specifying member names
-to @command{tar} that you give the exact member names. For example,
-@w{@kbd{tar --list --file=bfiles birds}} would produce an error message
-something like @samp{tar: birds: Not found in archive}, because there is
-no member named @file{birds}, only one named @file{./birds}. While the
-names @file{birds} and @file{./birds} name the same file, @emph{member}
-names are compared using a simplistic name comparison, in which an exact
-match is necessary. @xref{absolute}.
-
-However, @w{@kbd{tar --list --file=collection.tar folk}} would respond
-with @file{folk}, because @file{folk} is in the archive file
-@file{collection.tar}. If you are not sure of the exact file name, try
-listing all the files in the archive and searching for the one you
-expect to find; remember that if you use @samp{--list} with no file
-names as arguments, @command{tar} will print the names of all the members
-stored in the specified archive.
+Because @command{tar} preserves paths, file names must be specified as
+they appear in the archive (i.e., relative to the directory from which
+the archive was created). Therefore, it is essential when specifying
+member names to @command{tar} that you give the exact member names.
+For example, @w{@kbd{tar --list --file=bfiles.tar birds}} would produce an
+error message something like @samp{tar: birds: Not found in archive},
+because there is no member named @file{birds}, only one named
+@file{./birds}. While the names @file{birds} and @file{./birds} name
+the same file, @emph{member} names by default are compared verbatim.
+
+However, @w{@kbd{tar --list --file=bfiles.tar baboon}} would respond
+with @file{baboon}, because this exact member name is in the archive file
+@file{bfiles.tar}. If you are not sure of the exact file name,
+use @dfn{globbing patterns}, for example:
+
+@smallexample
+$ @kbd{tar --list --file=bfiles.tar --wildcards '*b*'}
+@end smallexample
+
+@noindent
+will list all members whose name contains @samp{b}. @xref{wildcards},
+for a detailed discussion of globbing patterns and related
+@command{tar} command line options.
@menu
* list dir::
To get information about the contents of an archived directory,
use the directory name as a file name argument in conjunction with
-@value{op-list}. To find out file attributes, include the
-@value{op-verbose} option.
+@option{--list} (@option{-t}). To find out file attributes, include the
+@option{--verbose} (@option{-v}) option.
For example, to find out about files in the directory @file{practice}, in
the archive file @file{music.tar}, type:
@smallexample
drwxrwxrwx myself user 0 1990-05-31 21:49 practice/
--rw-rw-rw- myself user 42 1990-05-21 13:29 practice/blues
--rw-rw-rw- myself user 62 1990-05-23 10:55 practice/folk
--rw-rw-rw- myself user 40 1990-05-21 13:30 practice/jazz
--rw-rw-rw- myself user 10240 1990-05-31 21:49 practice/collection.tar
+-rw-r--r-- myself user 42 1990-05-21 13:29 practice/blues
+-rw-r--r-- myself user 62 1990-05-23 10:55 practice/folk
+-rw-r--r-- myself user 40 1990-05-21 13:30 practice/jazz
+-rw-r--r-- myself user 10240 1990-05-31 21:49 practice/collection.tar
@end smallexample
When you use a directory name as a file name argument, @command{tar} acts on
@cindex Retrieving files from an archive
@cindex Resurrecting files from an archive
+@opindex extract
Creating an archive is only half the job---there is no point in storing
files in an archive if you can't retrieve them. The act of retrieving
members from an archive so they can be used and manipulated as
unarchived files again is called @dfn{extraction}. To extract files
-from an archive, use the @value{op-extract} operation. As with
-@value{op-create}, specify the name of the archive with @value{op-file}.
-Extracting an archive does not modify the archive in any way; you can
-extract it multiple times if you want or need to.
+from an archive, use the @option{--extract} (@option{--get} or
+@option{-x}) operation. As with @option{--create}, specify the name
+of the archive with @option{--file} (@option{-f}) option. Extracting
+an archive does not modify the archive in any way; you can extract it
+multiple times if you want or need to.
-Using @samp{--extract}, you can extract an entire archive, or specific
+Using @option{--extract}, you can extract an entire archive, or specific
files. The files can be directories containing other files, or not. As
-with @value{op-create} and @value{op-list}, you may use the short or the
+with @option{--create} (@option{-c}) and @option{--list} (@option{-t}), you may use the short or the
long form of the operation without affecting the performance.
@menu
produces this:
@smallexample
--rw-rw-rw- me user 28 1996-10-18 16:31 jazz
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
--rw-rw-rw- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 20 1996-09-23 16:44 folk
@end smallexample
@node extracting files
@subsection Extracting Specific Files
To extract specific archive members, give their exact member names as
-arguments, as printed by @value{op-list}. If you had mistakenly deleted
-one of the files you had placed in the archive @file{collection.tar}
-earlier (say, @file{blues}), you can extract it from the archive without
-changing the archive's structure. It will be identical to the original
-file @file{blues} that you deleted. @FIXME{At the time of this
-writing, atime and ctime are not restored. Since this is a tutorial
-for a beginnig user, it should hardly be mentioned here. Maybe in
-a footnote? --gray}.
+arguments, as printed by @option{--list} (@option{-t}). If you had
+mistakenly deleted one of the files you had placed in the archive
+@file{collection.tar} earlier (say, @file{blues}), you can extract it
+from the archive without changing the archive's structure. Its
+contents will be identical to the original file @file{blues} that you
+deleted.
First, make sure you are in the @file{practice} directory, and list the
files in the directory. Now, delete the file, @samp{blues}, and list
@noindent
If you list the files in the directory again, you will see that the file
-@file{blues} has been restored, with its original permissions, creation
-times, and owner.@FIXME{This is only accidentally true, but not in
-general. In most cases, one has to be root for restoring the owner, and
-use a special option for restoring permissions. Here, it just happens
-that the restoring user is also the owner of the archived members, and
-that the current @code{umask} is compatible with original permissions.}
-(These parameters will be identical to those which
+@file{blues} has been restored, with its original permissions, data
+modification times, and owner.@footnote{This is only accidentally
+true, but not in general. Whereas modification times are always
+restored, in most cases, one has to be root for restoring the owner,
+and use a special option for restoring permissions. Here, it just
+happens that the restoring user is also the owner of the archived
+members, and that the current @code{umask} is compatible with original
+permissions.} (These parameters will be identical to those which
the file had when you originally placed it in the archive; any changes
you may have made before deleting the file from the file system,
however, will @emph{not} have been made to the archive member.) The
archive file, @samp{collection.tar}, is the same as it was before you
extracted @samp{blues}. You can confirm this by running @command{tar} with
-@value{op-list}.
+@option{--list} (@option{-t}).
+
+Remember that as with other operations, specifying the exact member
+name is important. @w{@kbd{tar --extract --file=bfiles.tar birds}}
+will fail, because there is no member named @file{birds}. To extract
+the member named @file{./birds}, you must specify @w{@kbd{tar
+--extract --file=bfiles.tar ./birds}}. If you don't remember the
+exact member names, use @option{--list} (@option{-t}) option
+(@pxref{list}). You can also extract those members that match a
+specific @dfn{globbing pattern}. For example, to extract from
+@file{bfiles.tar} all files that begin with @samp{b}, no matter their
+directory prefix, you could type:
-@FIXME{we hope this will change:}Remember that as with other operations,
-specifying the exact member name is important. @w{@kbd{tar --extract
---file=bfiles.tar birds}} will fail, because there is no member named
-@file{birds}. To extract the member named @file{./birds}, you must
-specify @w{@kbd{tar --extract --file=bfiles.tar ./birds}}. To find the
-exact member names of the members of an archive, use @value{op-list}
-(@pxref{list}).
+@smallexample
+$ @kbd{tar -x -f bfiles.tar --wildcards --no-anchored 'b*'}
+@end smallexample
+
+@noindent
+Here, @option{--wildcards} instructs @command{tar} to treat
+command line arguments as globbing patterns and @option{--no-anchored}
+informs it that the patterns apply to member names after any @samp{/}
+delimiter. The use of globbing patterns is discussed in detail in
+@xref{wildcards}.
You can extract a file to standard output by combining the above options
-with the @value{op-to-stdout} option (@pxref{Writing to Standard
+with the @option{--to-stdout} (@option{-O}) option (@pxref{Writing to Standard
Output}).
-If you give the @value{op-verbose} option, then @value{op-extract} will
-print the names of the archive members as it extracts them.
+If you give the @option{--verbose} option, then @option{--extract}
+will print the names of the archive members as it extracts them.
@node extract dir
@subsection Extracting Files that are Directories
name, and that directory does not exist under the working directory when
the file is extracted, @command{tar} will create the directory.
-We can demonstrate how to use @samp{--extract} to extract a directory
+We can demonstrate how to use @option{--extract} to extract a directory
file with an example. Change to the @file{practice} directory if you
weren't there, and remove the files @file{folk} and @file{jazz}. Then,
go back to the parent directory and extract the archive
@end smallexample
@noindent
-If you were to specify two @value{op-verbose} options, @command{tar}
+If you were to specify two @option{--verbose} (@option{-v}) options, @command{tar}
would have displayed more detail about the extracted files, as shown
in the example below:
@smallexample
$ @kbd{tar -xvvf music.tar practice/folk practice/jazz}
--rw-rw-rw- me user 28 1996-10-18 16:31 practice/jazz
--rw-rw-rw- me user 20 1996-09-23 16:44 practice/folk
+-rw-r--r-- me user 28 1996-10-18 16:31 practice/jazz
+-rw-r--r-- me user 20 1996-09-23 16:44 practice/folk
@end smallexample
@noindent
directory as @file{practice}, you must give @file{practice} as part
of the file names when you extract those files from the archive.
-@FIXME{IMPORTANT! show the final structure, here. figure out what it
-will be.}
-
@node extracting untrusted archives
@subsection Extracting Archives from Untrusted Sources
@end smallexample
It is also a good practice to examine contents of the archive
-before extracting it, using @option{op-list} option, possibly combined
-with @option{op-verbose}.
+before extracting it, using @option{--list} (@option{-t}) option, possibly combined
+with @option{--verbose} (@option{-v}).
@node failing commands
@subsection Commands That Will Fail
@noindent
you would get a similar response. Members with those names are not in the
-archive. You must use the correct member names in order to extract the
-files from the archive.
+archive. You must use the correct member names, or wildcards, in order
+to extract the files from the archive.
If you have forgotten the correct names of the files in the archive,
use @w{@kbd{tar --list --verbose}} to list them correctly.
Some options are so special they are fully described right in this
chapter. They have the effect of inhibiting the normal operation of
@command{tar} or else, they globally alter the amount of feedback the user
-receives about what is going on. These are the @value{op-help} and
-@value{op-version} (@pxref{help}), @value{op-verbose} (@pxref{verbose})
-and @value{op-interactive} options (@pxref{interactive}).
+receives about what is going on. These are the @option{--help} and
+@option{--version} (@pxref{help}), @option{--verbose} (@pxref{verbose})
+and @option{--interactive} options (@pxref{interactive}).
@menu
* Synopsis::
* Styles::
* All Options::
* help::
+* defaults::
* verbose::
* interactive::
@end menu
(the @command{tar} main command) is usually given first.
Each @var{name} in the synopsis above is interpreted as an archive member
-name when the main command is one of @value{op-compare}, @value{op-delete},
-@value{op-extract}, @value{op-list} or @value{op-update}. When naming
-archive members, you must give the exact name of the member in the
-archive, as it is printed by @value{op-list}. For @value{op-append}
-and @value{op-create}, these @var{name} arguments specify the names
-of either files or directory hierarchies to place in the archive.
+name when the main command is one of @option{--compare}
+(@option{--diff}, @option{-d}), @option{--delete}, @option{--extract}
+(@option{--get}, @option{-x}), @option{--list} (@option{-t}) or
+@option{--update} (@option{-u}). When naming archive members, you
+must give the exact name of the member in the archive, as it is
+printed by @option{--list}. For @option{--append} (@option{-r}) and
+@option{--create} (@option{-c}), these @var{name} arguments specify
+the names of either files or directory hierarchies to place in the archive.
These files or hierarchies should already exist in the file system,
prior to the execution of the @command{tar} command.
@command{tar} interprets relative file names as being relative to the
working directory. @command{tar} will make all file names relative
(by removing leading slashes when archiving or restoring files),
-unless you specify otherwise (using the @value{op-absolute-names}
-option). @value{xref-absolute-names}, for more information about
-@value{op-absolute-names}.
+unless you specify otherwise (using the @option{--absolute-names}
+option). @xref{absolute}, for more information about
+@option{--absolute-names}.
If you give the name of a directory as either a file name or a member
name, then @command{tar} acts recursively on all the files and directories
beneath that directory. For example, the name @file{/} identifies all
-the files in the filesystem to @command{tar}.
+the files in the file system to @command{tar}.
The distinction between file names and archive member names is especially
important when shell globbing is used, and sometimes a source of confusion
-for newcomers. @xref{Wildcards}, for more information about globbing.
+for newcomers. @xref{wildcards}, for more information about globbing.
The problem is that shells may only glob using existing files in the
file system. Only @command{tar} itself may glob on archive members, so when
needed, you must ensure that wildcard characters reach @command{tar} without
Even if @var{name}s are often specified on the command line, they
can also be read from a text file in the file system, using the
-@value{op-files-from} option.
+@option{--files-from=@var{file-of-names}} (@option{-T @var{file-of-names}}) option.
-If you don't use any file name arguments, @value{op-append},
-@value{op-delete} and @value{op-concatenate} will do nothing, while
-@value{op-create} will usually yield a diagnostic and inhibit @command{tar}
-execution. The other operations of @command{tar} (@value{op-list},
-@value{op-extract}, @value{op-compare}, and @value{op-update}) will act
-on the entire contents of the archive.
+If you don't use any file name arguments, @option{--append} (@option{-r}),
+@option{--delete} and @option{--concatenate} (@option{--catenate},
+@option{-A}) will do nothing, while @option{--create} (@option{-c})
+will usually yield a diagnostic and inhibit @command{tar} execution.
+The other operations of @command{tar} (@option{--list},
+@option{--extract}, @option{--compare}, and @option{--update})
+will act on the entire contents of the archive.
@cindex exit status
@cindex return status
clearly diagnosed on @code{stderr}, after a line stating the nature of
the error.
-@GNUTAR{} returns only a few exit statuses. I'm really
-aiming simplicity in that area, for now. If you are not using the
-@value{op-compare} option, zero means that everything went well, besides
-maybe innocuous warnings. Nonzero means that something went wrong.
-Right now, as of today, ``nonzero'' is almost always 2, except for
-remote operations, where it may be 128.
+Possible exit codes of @GNUTAR{} are summarized in the following
+table:
+
+@table @asis
+@item 0
+@samp{Successful termination}.
+
+@item 1
+@samp{Some files differ}. If tar was invoked with @option{--compare}
+(@option{--diff}, @option{-d}) command line option, this means that
+some files in the archive differ from their disk counterparts
+(@pxref{compare}). If tar was given @option{--create},
+@option{--append} or @option{--update} option, this exit code means
+that some files were changed while being archived and so the resulting
+archive does not contain the exact copy of the file set.
+
+@item 2
+@samp{Fatal error}. This means that some fatal, unrecoverable error
+occurred.
+@end table
+
+If @command{tar} has invoked a subprocess and that subprocess exited with a
+nonzero exit code, @command{tar} exits with that code as well.
+This can happen, for example, if @command{tar} was given some
+compression option (@pxref{gzip}) and the external compressor program
+failed. Another example is @command{rmt} failure during backup to the
+remote device (@pxref{Remote Tape Server}).
@node using tar options
@section Using @command{tar} Options
you to do something special in order to make the archive look right.
You can customize and control @command{tar}'s performance by running
-@command{tar} with one or more options (such as @value{op-verbose}, which
-we used in the tutorial). As we said in the tutorial, @dfn{options} are
-arguments to @command{tar} which are (as their name suggests) optional.
-Depending on the operating mode, you may specify one or more options.
-Different options will have different effects, but in general they all
-change details of the operation, such as archive format, archive name,
-or level of user interaction. Some options make sense with all
-operating modes, while others are meaningful only with particular modes.
-You will likely use some options frequently, while you will only use
-others infrequently, or not at all. (A full list of options is
-available in @pxref{All Options}.)
-
+@command{tar} with one or more options (such as @option{--verbose}
+(@option{-v}), which we used in the tutorial). As we said in the
+tutorial, @dfn{options} are arguments to @command{tar} which are (as
+their name suggests) optional. Depending on the operating mode, you
+may specify one or more options. Different options will have different
+effects, but in general they all change details of the operation, such
+as archive format, archive name, or level of user interaction. Some
+options make sense with all operating modes, while others are
+meaningful only with particular modes. You will likely use some
+options frequently, while you will only use others infrequently, or
+not at all. (A full list of options is available in @pxref{All Options}.)
+
+@vrindex TAR_OPTIONS, environment variable
+@anchor{TAR_OPTIONS}
The @env{TAR_OPTIONS} environment variable specifies default options to
be placed in front of any explicit options. For example, if
@code{TAR_OPTIONS} is @samp{-v --unlink-first}, @command{tar} behaves as
can be used to specify an option containing whitespace or a backslash.
Note that @command{tar} options are case sensitive. For example, the
-options @samp{-T} and @samp{-t} are different; the first requires an
+options @option{-T} and @option{-t} are different; the first requires an
argument for stating the name of a file providing a list of @var{name}s,
while the second does not require an argument and is another way to
-write @value{op-list}.
+write @option{--list} (@option{-t}).
In addition to the eight operations, there are many options to
@command{tar}, and three different styles for writing both: long (mnemonic)
styles.
@FIXME{menu at end of this node. need to think of an actual outline
-for this chapter; probably do that after stuff from chap. 4 is
+for this chapter; probably do that after stuff from chapter 4 is
incorporated.}
@node Styles
different times during the history of @command{tar}. These styles will be
presented below, from the most recent to the oldest.
-Some options must take an argument. (For example, @value{op-file} takes
-the name of an archive file as an argument. If you do not supply an
-archive file name, @command{tar} will use a default, but this can be
-confusing; thus, we recommend that you always supply a specific archive
-file name.) Where you @emph{place} the arguments generally depends on
-which style of options you choose. We will detail specific information
-relevant to each option style in the sections on the different option
-styles, below. The differences are subtle, yet can often be very
-important; incorrect option placement can cause you to overwrite a
-number of important files. We urge you to note these differences, and
-only use the option style(s) which makes the most sense to you until you
-feel comfortable with the others.
-
-Some options @emph{may} take an argument (currently, there are
-two such options: @value{op-backup} and @value{op-occurrence}). Such
-options may have at most long and short forms, they do not have old style
-equivalent. The rules for specifying an argument for such options
-are stricter than those for specifying mandatory arguments. Please,
-pay special attention to them.
+Some options must take an argument. (For example, @option{--file}
+(@option{-f})) takes the name of an archive file as an argument. If
+you do not supply an archive file name, @command{tar} will use a
+default, but this can be confusing; thus, we recommend that you always
+supply a specific archive file name.) Where you @emph{place} the
+arguments generally depends on which style of options you choose. We
+will detail specific information relevant to each option style in the
+sections on the different option styles, below. The differences are
+subtle, yet can often be very important; incorrect option placement
+can cause you to overwrite a number of important files. We urge you
+to note these differences, and only use the option style(s) which
+makes the most sense to you until you feel comfortable with the others.
+
+Some options @emph{may} take an argument. Such options may have at
+most long and short forms, they do not have old style equivalent. The
+rules for specifying an argument for such options are stricter than
+those for specifying mandatory arguments. Please, pay special
+attention to them.
@menu
-* Mnemonic Options:: Mnemonic Option Style
+* Long Options:: Long Option Style
* Short Options:: Short Option Style
* Old Options:: Old Option Style
* Mixing:: Mixing Option Styles
@end menu
-@node Mnemonic Options
-@subsection Mnemonic Option Style
+@node Long Options
+@subsection Long Option Style
-@FIXME{have to decide whether or not to replace other occurrences of
-"mnemonic" with "long", or *ugh* vice versa.}
-
-Each option has at least one long (or mnemonic) name starting with two
-dashes in a row, e.g.@: @samp{--list}. The long names are more clear than
+Each option has at least one @dfn{long} (or @dfn{mnemonic}) name starting with two
+dashes in a row, e.g., @option{--list}. The long names are more clear than
their corresponding short or old names. It sometimes happens that a
-single mnemonic option has many different different names which are
-synonymous, such as @samp{--compare} and @samp{--diff}. In addition,
+single long option has many different different names which are
+synonymous, such as @option{--compare} and @option{--diff}. In addition,
long option names can be given unique abbreviations. For example,
-@samp{--cre} can be used in place of @samp{--create} because there is no
-other mnemonic option which begins with @samp{cre}. (One way to find
+@option{--cre} can be used in place of @option{--create} because there is no
+other long option which begins with @samp{cre}. (One way to find
this out is by trying it and seeing what happens; if a particular
abbreviation could represent more than one option, @command{tar} will tell
you that that abbreviation is ambiguous and you'll know that that
unique abbreviation for the long name of an option you didn't want to
use, you are stuck; @command{tar} will perform the command as ordered.)
-Mnemonic options are meant to be obvious and easy to remember, and their
+Long options are meant to be obvious and easy to remember, and their
meanings are generally easier to discern than those of their
corresponding short options (see below). For example:
gives a fairly good set of hints about what the command does, even
for those not fully acquainted with @command{tar}.
-Mnemonic options which require arguments take those arguments
-immediately following the option name. There are two ways of
-specifying a mandatory argument. It can be separated from the
+Long options which require arguments take those arguments
+immediately following the option name. There are two ways of
+specifying a mandatory argument. It can be separated from the
option name either by an equal sign, or by any amount of
-white space characters. For example, the @samp{--file} option (which
+white space characters. For example, the @option{--file} option (which
tells the name of the @command{tar} archive) is given a file such as
@file{archive.tar} as argument by using any of the following notations:
-@samp{--file=archive.tar} or @samp{--file archive.tar}.
+@option{--file=archive.tar} or @option{--file archive.tar}.
In contrast, optional arguments must always be introduced using
-an equal sign. For example, the @samp{--backup} option takes
-an optional argument specifying backup type. It must be used
-as @samp{--backup=@var{backup-type}}.
+an equal sign. For example, the @option{--backup} option takes
+an optional argument specifying backup type. It must be used
+as @option{--backup=@var{backup-type}}.
@node Short Options
@subsection Short Option Style
-Most options also have a short option name. Short options start with
-a single dash, and are followed by a single character, e.g.@: @samp{-t}
-(which is equivalent to @samp{--list}). The forms are absolutely
+Most options also have a @dfn{short option} name. Short options start with
+a single dash, and are followed by a single character, e.g., @option{-t}
+(which is equivalent to @option{--list}). The forms are absolutely
identical in function; they are interchangeable.
The short option names are faster to type than long option names.
Short options which require arguments take their arguments immediately
following the option, usually separated by white space. It is also
possible to stick the argument right after the short option name, using
-no intervening space. For example, you might write @w{@samp{-f
-archive.tar}} or @samp{-farchive.tar} instead of using
-@samp{--file=archive.tar}. Both @samp{--file=@var{archive-name}} and
-@w{@samp{-f @var{archive-name}}} denote the option which indicates a
+no intervening space. For example, you might write @w{@option{-f
+archive.tar}} or @option{-farchive.tar} instead of using
+@option{--file=archive.tar}. Both @option{--file=@var{archive-name}} and
+@w{@option{-f @var{archive-name}}} denote the option which indicates a
specific archive, here named @file{archive.tar}.
Short options which take optional arguments take their arguments
Short options' letters may be clumped together, but you are not
required to do this (as compared to old options; see below). When
short options are clumped as a set, use one (single) dash for them
-all, e.g.@: @w{@samp{@command{tar} -cvf}}. Only the last option in
+all, e.g., @w{@samp{@command{tar} -cvf}}. Only the last option in
such a set is allowed to have an argument@footnote{Clustering many
options, the last of which has an argument, is a rather opaque way to
write options. Some wonder if @acronym{GNU} @code{getopt} should not
@subsection Old Option Style
@UNREVISED
-Like short options, old options are single letters. However, old options
+Like short options, @dfn{old options} are single letters. However, old options
must be written together as a single clumped set, without spaces separating
them or dashes preceding them@footnote{Beware that if you precede options
with a dash, you are announcing the short option style instead of the
@command{tar} program name and some white space; old options cannot appear
anywhere else. The letter of an old option is exactly the same letter as
the corresponding short option. For example, the old option @samp{t} is
-the same as the short option @samp{-t}, and consequently, the same as the
-mnemonic option @samp{--list}. So for example, the command @w{@samp{tar
-cv}} specifies the option @samp{-v} in addition to the operation @samp{-c}.
-
-@FIXME{bob suggests having an uglier example. :-) }
+the same as the short option @option{-t}, and consequently, the same as the
+long option @option{--list}. So for example, the command @w{@samp{tar
+cv}} specifies the option @option{-v} in addition to the operation @option{-c}.
When options that need arguments are given together with the command,
all the associated arguments follow, in the same order as the options.
@end smallexample
@noindent
-Here, @samp{20} is the argument of @samp{-b} and @samp{/dev/rmt0} is
-the argument of @samp{-f}.
+Here, @samp{20} is the argument of @option{-b} and @samp{/dev/rmt0} is
+the argument of @option{-f}.
On the other hand, this old style syntax makes it difficult to match
option letters with their corresponding arguments, and is often
confusing. In the command @w{@samp{tar cvbf 20 /dev/rmt0}}, for example,
-@samp{20} is the argument for @samp{-b}, @samp{/dev/rmt0} is the
-argument for @samp{-f}, and @samp{-v} does not have a corresponding
+@samp{20} is the argument for @option{-b}, @samp{/dev/rmt0} is the
+argument for @option{-f}, and @option{-v} does not have a corresponding
argument. Even using short options like in @w{@samp{tar -c -v -b 20 -f
/dev/rmt0}} is clearer, putting all arguments next to the option they
pertain to.
@kbd{tar cf archive.tar.gz -z file}
@end smallexample
-@FIXME{still could explain this better; it's redundant:}
-
@cindex option syntax, traditional
As far as we know, all @command{tar} programs, @acronym{GNU} and
non-@acronym{GNU}, support old options. @GNUTAR{}
the first argument is always treated as containing command and option
letters even if it doesn't start with @samp{-}. Thus, @samp{tar c} is
equivalent to @w{@samp{tar -c}:} both of them specify the
-@value{op-create} command to create an archive.
+@option{--create} (@option{-c}) command to create an archive.
@node Mixing
@subsection Mixing Option Styles
All three styles may be intermixed in a single @command{tar} command,
so long as the rules for each style are fully
respected@footnote{Before @GNUTAR{} version 1.11.6,
-a bug prevented intermixing old style options with mnemonic options in
+a bug prevented intermixing old style options with long options in
some cases.}. Old style options and either of the modern styles of
options may be mixed within a single @command{tar} command. However,
old style options must be introduced as the first arguments only,
user intended (judging based on the example in the previous set which
uses long options, whose intent is therefore very clear). The first
four specify that the @command{tar} archive would be a file named
-@samp{-c}, @samp{c}, @samp{carchive.tar} or @samp{archive.tarc},
+@option{-c}, @samp{c}, @samp{carchive.tar} or @samp{archive.tarc},
respectively. The first two examples also specify a single non-option,
@var{name} argument having the value @samp{archive.tar}. The last
example contains only old style option letters (repeating option
@node Operation Summary
@subsection Operations
-@table @kbd
+@table @option
+@opsummary{append}
@item --append
@itemx -r
Appends files to the end of the archive. @xref{append}.
+@opsummary{catenate}
@item --catenate
@itemx -A
-Same as @samp{--concatenate}. @xref{concatenate}.
+Same as @option{--concatenate}. @xref{concatenate}.
+@opsummary{compare}
@item --compare
@itemx -d
system, and reports differences in file size, mode, owner,
modification date and contents. @xref{compare}.
+@opsummary{concatenate}
@item --concatenate
@itemx -A
Appends other @command{tar} archives to the end of the archive.
@xref{concatenate}.
+@opsummary{create}
@item --create
@itemx -c
Creates a new @command{tar} archive. @xref{create}.
+@opsummary{delete}
@item --delete
Deletes members from the archive. Don't try this on a archive on a
tape! @xref{delete}.
+@opsummary{diff}
@item --diff
@itemx -d
-Same @samp{--compare}. @xref{compare}.
+Same @option{--compare}. @xref{compare}.
+@opsummary{extract}
@item --extract
@itemx -x
Extracts members from the archive into the file system. @xref{extract}.
+@opsummary{get}
@item --get
@itemx -x
-Same as @samp{--extract}. @xref{extract}.
+Same as @option{--extract}. @xref{extract}.
+@opsummary{list}
@item --list
@itemx -t
Lists the members in an archive. @xref{list}.
+@opsummary{update}
@item --update
@itemx -u
-@FIXME{It was: A combination of the @samp{--compare} and
-@samp{--append} operations. This is not true and rather misleading,
-as @value{op-compare} does a lot more than @value{op-update} for
-ensuring files are identical.} Adds files to the end of the archive,
-but only if they are newer than their counterparts already in the
-archive, or if they do not already exist in the archive.
-@xref{update}.
+Adds files to the end of the archive, but only if they are newer than
+their counterparts already in the archive, or if they do not already
+exist in the archive. @xref{update}.
@end table
@node Option Summary
@subsection @command{tar} Options
-@table @kbd
+@table @option
+@opsummary{absolute-names}
@item --absolute-names
@itemx -P
Normally when creating an archive, @command{tar} strips an initial
@samp{/} from member names. This option disables that behavior.
-@FIXME-xref{}
+@xref{absolute}.
+@opsummary{after-date}
@item --after-date
-(See @samp{--newer}.) @FIXME-pxref{}
+(See @option{--newer}, @pxref{after})
+@opsummary{anchored}
@item --anchored
-An exclude pattern must match an initial subsequence of the name's components.
-@FIXME-xref{}
+A pattern must match an initial subsequence of the name's components.
+@xref{controlling pattern-matching}.
+@opsummary{atime-preserve}
@item --atime-preserve
-
-Tells @command{tar} to preserve the access time field in a file's inode when
-reading it. Due to limitations in the @code{utimes} system call, the
-modification time field is also preserved, which may cause problems if
-the file is simultaneously being modified by another program.
-This option is incompatible with incremental backups, because
-preserving the access time involves updating the last-changed time.
-Also, this option does not work on files that you do not own,
-unless you're root.
-@FIXME-xref{}
-
+@itemx --atime-preserve=replace
+@itemx --atime-preserve=system
+
+Attempt to preserve the access time of files when reading them. This
+option currently is effective only on files that you own, unless you
+have superuser privileges.
+
+@option{--atime-preserve=replace} remembers the access time of a file
+before reading it, and then restores the access time afterwards. This
+may cause problems if other programs are reading the file at the same
+time, as the times of their accesses will be lost. On most platforms
+restoring the access time also requires @command{tar} to restore the
+data modification time too, so this option may also cause problems if
+other programs are writing the file at the same time. (Tar attempts
+to detect this situation, but cannot do so reliably due to race
+conditions.) Worse, on most platforms restoring the access time also
+updates the status change time, which means that this option is
+incompatible with incremental backups.
+
+@option{--atime-preserve=system} avoids changing time stamps on files,
+without interfering with time stamp updates
+caused by other programs, so it works better with incremental backups.
+However, it requires a special @code{O_NOATIME} option from the
+underlying operating and file system implementation, and it also requires
+that searching directories does not update their access times. As of
+this writing (November 2005) this works only with Linux, and only with
+Linux kernels 2.6.8 and later. Worse, there is currently no reliable
+way to know whether this feature actually works. Sometimes
+@command{tar} knows that it does not work, and if you use
+@option{--atime-preserve=system} then @command{tar} complains and
+exits right away. But other times @command{tar} might think that the
+option works when it actually does not.
+
+Currently @option{--atime-preserve} with no operand defaults to
+@option{--atime-preserve=replace}, but this may change in the future
+as support for @option{--atime-preserve=system} improves.
+
+If your operating system does not support
+@option{--atime-preserve=@-system}, you might be able to preserve access
+times reliably by by using the @command{mount} command. For example,
+you can mount the file system read-only, or access the file system via
+a read-only loopback mount, or use the @samp{noatime} mount option
+available on some systems. However, mounting typically requires
+superuser privileges and can be a pain to manage.
+
+@opsummary{backup}
@item --backup=@var{backup-type}
Rather than deleting files from the file system, @command{tar} will
back them up using simple or numbered backups, depending upon
-@var{backup-type}. @FIXME-xref{}
+@var{backup-type}. @xref{backup}.
+@opsummary{block-number}
@item --block-number
@itemx -R
With this option present, @command{tar} prints error messages for read errors
-with the block number in the archive file. @FIXME-xref{}
+with the block number in the archive file. @xref{block-number}.
+@opsummary{blocking-factor}
@item --blocking-factor=@var{blocking}
@itemx -b @var{blocking}
Sets the blocking factor @command{tar} uses to @var{blocking} x 512 bytes per
-record. @FIXME-xref{}
+record. @xref{Blocking Factor}.
+@opsummary{bzip2}
@item --bzip2
@itemx -j
This option tells @command{tar} to read or write archives through
-@code{bzip2}. @FIXME-xref{}
+@code{bzip2}. @xref{gzip}.
-@item --checkpoint
+@opsummary{checkpoint}
+@item --checkpoint[=@var{number}]
-This option directs @command{tar} to print periodic checkpoint messages as it
-reads through the archive. Its intended for when you want a visual
-indication that @command{tar} is still running, but don't want to see
-@samp{--verbose} output. @FIXME-xref{}
+This option directs @command{tar} to print periodic checkpoint
+messages as it reads through the archive. It is intended for when you
+want a visual indication that @command{tar} is still running, but
+don't want to see @option{--verbose} output. For a detailed
+description, see @ref{Progress information}.
+@opsummary{check-links}
@item --check-links
@itemx -l
If this option was given, @command{tar} will check the number of links
-dumped for each processed file. If this number does not match the
+dumped for each processed file. If this number does not match the
total number of hard links for the file, a warning message will be
-output.
-
-Future versions will take @option{-l} as a short version of
-@option{--check-links}. However, current release still retains the old
-semantics for @option{-l}.
-
-@xref{Current status}, for more information.
+output @footnote{Earlier versions of @GNUTAR{} understood @option{-l} as a
+synonym for @option{--one-file-system}. The current semantics, which
+complies to UNIX98, was introduced with version
+1.15.91. @xref{Changes}, for more information.}.
+@opsummary{compress}
+@opsummary{uncompress}
@item --compress
@itemx --uncompress
@itemx -Z
@command{tar} will use the @command{compress} program when reading or
writing the archive. This allows you to directly act on archives
-while saving space. @FIXME-xref{}
+while saving space. @xref{gzip}.
+@opsummary{confirmation}
@item --confirmation
-(See @samp{--interactive}.) @FIXME-pxref{}
+(See @option{--interactive}.) @xref{interactive}.
+
+@opsummary{delay-directory-restore}
+@item --delay-directory-restore
+Delay setting modification times and permissions of extracted
+directories until the end of extraction. @xref{Directory Modification Times and Permissions}.
+
+@opsummary{dereference}
@item --dereference
@itemx -h
When creating a @command{tar} archive, @command{tar} will archive the
file that a symbolic link points to, rather than archiving the
-symlink. @FIXME-xref{}
+symlink. @xref{dereference}.
+@opsummary{directory}
@item --directory=@var{dir}
@itemx -C @var{dir}
When this option is specified, @command{tar} will change its current directory
to @var{dir} before performing any operations. When this option is used
-during archive creation, it is order sensitive. @FIXME-xref{}
+during archive creation, it is order sensitive. @xref{directory}.
+@opsummary{exclude}
@item --exclude=@var{pattern}
When performing operations, @command{tar} will skip files that match
-@var{pattern}. @FIXME-xref{}
+@var{pattern}. @xref{exclude}.
+@opsummary{exclude-from}
@item --exclude-from=@var{file}
@itemx -X @var{file}
-Similar to @samp{--exclude}, except @command{tar} will use the list of
-patterns in the file @var{file}. @FIXME-xref{}
+Similar to @option{--exclude}, except @command{tar} will use the list of
+patterns in the file @var{file}. @xref{exclude}.
+
+@opsummary{exclude-caches}
+@item --exclude-caches
+Automatically excludes all directories
+containing a cache directory tag. @xref{exclude}.
+
+@opsummary{exclude-tag}
+@item --exclude-tag=@var{file}
+
+Exclude all directories, containing file named @var{file}. @xref{exclude}.
+
+@opsummary{file}
@item --file=@var{archive}
@itemx -f @var{archive}
@command{tar} will use the file @var{archive} as the @command{tar} archive it
performs operations on, rather than @command{tar}'s compilation dependent
-default. @FIXME-xref{}
+default. @xref{file tutorial}.
+@opsummary{files-from}
@item --files-from=@var{file}
@itemx -T @var{file}
@command{tar} will use the contents of @var{file} as a list of archive members
or files to operate on, in addition to those specified on the
-command-line. @FIXME-xref{}
+command-line. @xref{files}.
+@opsummary{force-local}
@item --force-local
-Forces @command{tar} to interpret the filename given to @samp{--file}
+Forces @command{tar} to interpret the filename given to @option{--file}
as a local file, even if it looks like a remote tape drive name.
-@FIXME-xref{}
+@xref{local and remote archives}.
+@opsummary{format}
@item --format=@var{format}
+@itemx -H @var{format}
-Selects output archive format. @var{Format} may be one of the
+Selects output archive format. @var{Format} may be one of the
following:
@table @samp
1.12 or earlier.
@item gnu
-Creates archive in GNU tar 1.13 format. Basically it is the same as
+Creates archive in GNU tar 1.13 format. Basically it is the same as
@samp{oldgnu} with the only difference in the way it handles long
numeric fields.
@xref{Formats}, for a detailed discussion of these formats.
+@opsummary{group}
@item --group=@var{group}
Files added to the @command{tar} archive will have a group id of @var{group},
rather than the group from the source file. @var{group} is first decoded
as a group symbolic name, but if this interpretation fails, it has to be
-a decimal numeric group ID. @FIXME-xref{}
+a decimal numeric group ID. @xref{override}.
-Also see the comments for the @value{op-owner} option.
+Also see the comments for the @option{--owner=@var{user}} option.
+@opsummary{gzip}
+@opsummary{gunzip}
+@opsummary{ungzip}
@item --gzip
@itemx --gunzip
@itemx --ungzip
This option tells @command{tar} to read or write archives through
@command{gzip}, allowing @command{tar} to directly operate on several
-kinds of compressed archives transparently. @FIXME-xref{}
+kinds of compressed archives transparently. @xref{gzip}.
+@opsummary{help}
@item --help
+@itemx -?
@command{tar} will print out a short message summarizing the operations and
-options to @command{tar} and exit. @FIXME-xref{}
+options to @command{tar} and exit. @xref{help}.
+@opsummary{ignore-case}
@item --ignore-case
-Ignore case when excluding files.
-@FIXME-xref{}
+Ignore case when matching member or file names with
+patterns. @xref{controlling pattern-matching}.
+
+@opsummary{ignore-command-error}
+@item --ignore-command-error
+Ignore exit codes of subprocesses. @xref{Writing to an External Program}.
+@opsummary{ignore-failed-read}
@item --ignore-failed-read
Do not exit unsuccessfully merely because an unreadable file was encountered.
@xref{Reading}.
+@opsummary{ignore-zeros}
@item --ignore-zeros
@itemx -i
With this option, @command{tar} will ignore zeroed blocks in the
archive, which normally signals EOF. @xref{Reading}.
+@opsummary{incremental}
@item --incremental
@itemx -G
Used to inform @command{tar} that it is working with an old
@acronym{GNU}-format incremental backup archive. It is intended
-primarily for backwards compatibility only. @FIXME-xref{}
+primarily for backwards compatibility only. @xref{Incremental Dumps},
+for a detailed discussion of incremental archives.
+@opsummary{index-file}
@item --index-file=@var{file}
Send verbose output to @var{file} instead of to standard output.
+@opsummary{info-script}
+@opsummary{new-volume-script}
@item --info-script=@var{script-file}
@itemx --new-volume-script=@var{script-file}
@itemx -F @var{script-file}
When @command{tar} is performing multi-tape backups, @var{script-file} is run
at the end of each tape. If @var{script-file} exits with nonzero status,
-@command{tar} fails immediately. @FIXME-xref{}
+@command{tar} fails immediately. @xref{info-script}, for a detailed
+discussion of @var{script-file}.
+@opsummary{interactive}
@item --interactive
@itemx --confirmation
@itemx -w
Specifies that @command{tar} should ask the user for confirmation before
performing potentially destructive options, such as overwriting files.
-@FIXME-xref{}
+@xref{interactive}.
+@opsummary{keep-newer-files}
@item --keep-newer-files
Do not replace existing files that are newer than their archive copies
when extracting files from an archive.
+@opsummary{keep-old-files}
@item --keep-old-files
@itemx -k
Do not overwrite existing files when extracting files from an archive.
-@xref{Writing}.
+@xref{Keep Old Files}.
+@opsummary{label}
@item --label=@var{name}
@itemx -V @var{name}
When creating an archive, instructs @command{tar} to write @var{name}
as a name record in the archive. When extracting or listing archives,
@command{tar} will only operate on archives that have a label matching
-the pattern specified in @var{name}. @FIXME-xref{}
+the pattern specified in @var{name}. @xref{Tape Files}.
+@opsummary{listed-incremental}
@item --listed-incremental=@var{snapshot-file}
@itemx -g @var{snapshot-file}
-During a @samp{--create} operation, specifies that the archive that
+During a @option{--create} operation, specifies that the archive that
@command{tar} creates is a new @acronym{GNU}-format incremental
backup, using @var{snapshot-file} to determine which files to backup.
With other operations, informs @command{tar} that the archive is in
-incremental format. @FIXME-xref{}
+incremental format. @xref{Incremental Dumps}.
+@opsummary{mode}
@item --mode=@var{permissions}
When adding files to an archive, @command{tar} will use
@var{permissions} for the archive members, rather than the permissions
-from the files. The program @command{chmod} and this @command{tar}
-option share the same syntax for what @var{permissions} might be.
-@xref{File permissions, Permissions, File permissions, fileutils,
-@acronym{GNU} file utilities}. This reference also has useful
-information for those not being overly familiar with the Unix
-permission system.
-
-Of course, @var{permissions} might be plainly specified as an octal number.
-However, by using generic symbolic modifications to mode bits, this allows
-more flexibility. For example, the value @samp{a+rw} adds read and write
-permissions for everybody, while retaining executable bits on directories
-or on any other file already marked as executable.
+from the files. @var{permissions} can be specified either as an octal
+number or as symbolic permissions, like with
+@command{chmod}. @xref{override}.
+
+@opsummary{mtime}
+@item --mtime=@var{date}
+
+When adding files to an archive, @command{tar} will use @var{date} as
+the modification time of members when creating archives, instead of
+their actual modification times. The value of @var{date} can be
+either a textual date representation (@pxref{Date input formats}) or a
+name of the existing file, starting with @samp{/} or @samp{.}. In the
+latter case, the modification time of that file is used. @xref{override}.
+@opsummary{multi-volume}
@item --multi-volume
@itemx -M
Informs @command{tar} that it should create or otherwise operate on a
-multi-volume @command{tar} archive. @FIXME-xref{}
+multi-volume @command{tar} archive. @xref{Using Multiple Tapes}.
+@opsummary{new-volume-script}
@item --new-volume-script
(see --info-script)
+@opsummary{seek}
+@item --seek
+@itemx -n
+
+Assume that the archive media supports seeks to arbitrary
+locations. Usually @command{tar} determines automatically whether
+the archive can be seeked or not. This option is intended for use
+in cases when such recognition fails.
+
+@opsummary{newer}
@item --newer=@var{date}
@itemx --after-date=@var{date}
@itemx -N
When creating an archive, @command{tar} will only add files that have changed
since @var{date}. If @var{date} begins with @samp{/} or @samp{.}, it
-is taken to be the name of a file whose last-modified time specifies
-the date. @FIXME-xref{}
+is taken to be the name of a file whose data modification time specifies
+the date. @xref{after}.
+@opsummary{newer-mtime}
@item --newer-mtime=@var{date}
-Like @samp{--newer}, but add only files whose
-contents have changed (as opposed to just @samp{--newer}, which will
-also back up files for which any status information has changed).
+Like @option{--newer}, but add only files whose
+contents have changed (as opposed to just @option{--newer}, which will
+also back up files for which any status information has
+changed). @xref{after}.
+@opsummary{no-anchored}
@item --no-anchored
An exclude pattern can match any subsequence of the name's components.
-@FIXME-xref{}
+@xref{controlling pattern-matching}.
+
+@opsummary{no-delay-directory-restore}
+@item --no-delay-directory-restore
+
+Setting modification times and permissions of extracted
+directories when all files from this directory has been
+extracted. This is the default. @xref{Directory Modification Times and Permissions}.
+@opsummary{no-ignore-case}
@item --no-ignore-case
-Use case-sensitive matching when excluding files.
-@FIXME-xref{}
+Use case-sensitive matching.
+@xref{controlling pattern-matching}.
+@opsummary{no-ignore-command-error}
+@item --no-ignore-command-error
+Print warnings about subprocesses terminated with a non-zero exit
+code. @xref{Writing to an External Program}.
+
+@opsummary{no-overwrite-dir}
+@item --no-overwrite-dir
+
+Preserve metadata of existing directories when extracting files
+from an archive. @xref{Overwrite Old Files}.
+
+@opsummary{no-quote-chars}
+@item --no-quote-chars=@var{string}
+Remove characters listed in @var{string} from the list of quoted
+characters set by the previous @option{--quote-chars} option
+(@pxref{quoting styles}).
+
+@opsummary{no-recursion}
@item --no-recursion
With this option, @command{tar} will not recurse into directories.
-@FIXME-xref{}
+@xref{recurse}.
+@opsummary{no-same-owner}
@item --no-same-owner
@itemx -o
When extracting an archive, do not attempt to preserve the owner
specified in the @command{tar} archive. This the default behavior
-for ordinary users; this option has an effect only for the superuser.
+for ordinary users.
+@opsummary{no-same-permissions}
@item --no-same-permissions
When extracting an archive, subtract the user's umask from files from
the permissions specified in the archive. This is the default behavior
-for ordinary users; this option has an effect only for the superuser.
+for ordinary users.
+
+@opsummary{no-unquote}
+@item --no-unquote
+Treat all input file or member names literally, do not interpret
+escape sequences. @xref{input name quoting}.
+@opsummary{no-wildcards}
@item --no-wildcards
-Do not use wildcards when excluding files.
-@FIXME-xref{}
+Do not use wildcards.
+@xref{controlling pattern-matching}.
+@opsummary{no-wildcards-match-slash}
@item --no-wildcards-match-slash
-Wildcards do not match @samp{/} when excluding files.
-@FIXME-xref{}
+Wildcards do not match @samp{/}.
+@xref{controlling pattern-matching}.
+@opsummary{null}
@item --null
-When @command{tar} is using the @samp{--files-from} option, this option
-instructs @command{tar} to expect filenames terminated with @kbd{NUL}, so
+When @command{tar} is using the @option{--files-from} option, this option
+instructs @command{tar} to expect filenames terminated with @option{NUL}, so
@command{tar} can correctly work with file names that contain newlines.
-@FIXME-xref{}
+@xref{nul}.
+@opsummary{numeric-owner}
@item --numeric-owner
This option will notify @command{tar} that it should use numeric user
and group IDs when creating a @command{tar} file, rather than names.
-@FIXME-xref{}
+@xref{Attributes}.
@item -o
-When extracting files, this option is a synonym for
-@option{--no-same-owner}, i.e. it prevents @command{tar} from
+The function of this option depends on the action @command{tar} is
+performing. When extracting files, @option{-o} is a synonym for
+@option{--no-same-owner}, i.e., it prevents @command{tar} from
restoring ownership of files being extracted.
-When creating an archive, @option{-o} is a synonym for
-@option{--old-archive}. This behavior is for compatibility
+When creating an archive, it is a synonym for
+@option{--old-archive}. This behavior is for compatibility
with previous versions of @GNUTAR{}, and will be
removed in the future releases.
-@xref{Current status}, for more information.
+@xref{Changes}, for more information.
+@opsummary{occurrence}
@item --occurrence[=@var{number}]
This option can be used in conjunction with one of the subcommands
line or via @option{-T} option.
This option instructs @command{tar} to process only the @var{number}th
-occurrence of each named file. @var{Number} defaults to 1, so
+occurrence of each named file. @var{Number} defaults to 1, so
@smallexample
tar -x -f archive.tar --occurrence filename
@end smallexample
@noindent
-will extract the first occurrence of @file{filename} from @file{archive.tar}
+will extract the first occurrence of the member @file{filename} from @file{archive.tar}
and will terminate without scanning to the end of the archive.
+@opsummary{old-archive}
@item --old-archive
Synonym for @option{--format=v7}.
+@opsummary{one-file-system}
@item --one-file-system
-@itemx -l
Used when creating an archive. Prevents @command{tar} from recursing into
directories that are on different file systems from the current
-directory.
-
-Earlier versions of @GNUTAR{} understood @option{-l} as a
-synonym for @option{--one-file-system}. Although such usage is still
-allowed in the present version, it is @emph{strongly discouraged}.
-The future versions of @GNUTAR{} will use @option{-l} as
-a synonym for @option{--check-links}.
-
-@xref{Current status}, for more information.
+directory @footnote{Earlier versions of @GNUTAR{} understood @option{-l} as a
+synonym for @option{--one-file-system}. This has changed in version
+1.15.91. @xref{Changes}, for more information.}.
+@opsummary{overwrite}
@item --overwrite
Overwrite existing files and directory metadata when extracting files
from an archive. @xref{Overwrite Old Files}.
+@opsummary{overwrite-dir}
@item --overwrite-dir
Overwrite the metadata of existing directories when extracting files
from an archive. @xref{Overwrite Old Files}.
+@opsummary{owner}
@item --owner=@var{user}
Specifies that @command{tar} should use @var{user} as the owner of members
when creating archives, instead of the user associated with the source
file. @var{user} is first decoded as a user symbolic name, but if
this interpretation fails, it has to be a decimal numeric user ID.
-@FIXME-xref{}
-
-There is no value indicating a missing number, and @samp{0} usually means
-@code{root}. Some people like to force @samp{0} as the value to offer in
-their distributions for the owner of files, because the @code{root} user is
-anonymous anyway, so that might as well be the owner of anonymous archives.
+@xref{override}.
This option does not affect extraction from archives.
-@item --pax-option=@var{keyword-list}
-
-This option is meaningful only with @acronym{POSIX.1-2001} archives
-(@FIXME-xref{}). It modifies the way @command{tar} handles the
-extended header keywords. @var{Keyword-list} is a comma-separated
-list of keyword options, each keyword option taking one of
-the following forms:
-
-@table @asis
-@item delete=@var{pattern}
-When used with one of archive-creation command (@FIXME-xref{}),
-this option instructs @command{tar} to omit from extended header records
-that it produces any keywords matching the string @var{pattern}.
-
-When used in extract or list mode, this option instructs tar
-to ignore any keywords matching the given @var{pattern} in the extended
-header records. In both cases, matching is performed using the pattern
-matching notation described in @acronym{POSIX 1003.2}, 3.13 @FIXME-xref{see
-man 7 glob}. For example:
-
-@smallexample
---pax-option delete=security.*
-@end smallexample
-
-would suppress security-related information.
-
-@item exthdr.name=@var{string}
-
-This keyword allows user control over the name that is written into the
-ustar header blocks for the extended headers. The name is obtained
-from @var{string} after substituting the following meta-characters:
-
-@multitable @columnfractions .30 .70
-@item Meta-character @tab Replaced By
-@item %d @tab The directory name of the file, equivalent to the
-result of the @command{dirname} utility on the translated pathname.
-@item %f @tab The filename of the file, equivalent to the result
-of the @command{basename} utility on the translated pathname.
-@item %p @tab The process ID of the @command{tar} process.
-@item %% @tab A @samp{%} character.
-@end multitable
-
-Any other @samp{%} characters in @var{string} produce undefined
-results.
-
-If no option @samp{exthdr.name=string} is specified, @command{tar}
-will use the following default value:
-
-@smallexample
-%d/PaxHeaders.%p/%f
-@end smallexample
-
-@item globexthdr.name=@var{string}
-This keyword allows user control over the name that is written into
-the ustar header blocks for global extended header records. The name
-shall will be obtained from the contents of @var{string}, after the
-following character substitutions have been made:
-
-@multitable @columnfractions .30 .70
-@item Meta-character @tab Replaced By
-@item %n @tab An integer that represents the
-sequence number of the global extended header record in the archive,
-starting at 1.
-@item %p @tab The process ID of the @command{tar} process.
-@item %% @tab A @samp{%} character.
-@end multitable
-
-Any other @samp{%} characters in string produce undefined results.
+@opsummary{transform}
+@item --transform=@var{sed-expr}
-If no option @samp{globexthdr.name=string} is specified, @command{tar}
-will use the following default value:
+Transform file or member names using @command{sed} replacement expression
+@var{sed-expr}. For example,
@smallexample
-$TMPDIR/GlobalHead.%p.%n
+$ @kbd{tar cf archive.tar --transform 's,^\./,usr/,' .}
@end smallexample
@noindent
-where @samp{$TMPDIR} represents the value of the @var{TMPDIR}
-environment variable. If @var{TMPDIR} is not set, @command{tar}
-uses @samp{/tmp}.
-
-@item @var{keyword}=@var{value}
-When used with one of archive-creation commands, these keyword/value pairs
-will be included at the beginning of the archive in a global extended
-header record. When used with one of archive-reading commands,
-@command{tar} will behave as if it has encountered these keyword/value
-pairs at the beginning of the archive in a global extended header
-record.
-
-@item @var{keyword}:=@var{value}
-When used with one of archive-creation commands, these keyword/value pairs
-will be included as records at the beginning of an extended header for
-each file. This is effectively equivalent to @var{keyword}=@var{value}
-form except that it creates no global extended header records.
-
-When used with one of archive-reading commands, @command{tar} will
-behave as if these keyword/value pairs were included as records at the
-end of each extended header; thus, they will override any global or
-file-specific extended header record keywords of the same names.
-For example, in the command:
-
-@smallexample
-tar --format=posix --create \
- --file archive --pax-option gname:=user .
-@end smallexample
-
-the group name will be forced to a new value for all files
-stored in the archive.
-@end table
+will add to @file{archive} files from the current working directory,
+replacing initial @samp{./} prefix with @samp{usr/}. For the detailed
+discussion, @xref{transform}.
+
+To see transformed member names in verbose listings, use
+@option{--show-transformed-names} option
+(@pxref{show-transformed-names}).
+
+@opsummary{quote-chars}
+@item --quote-chars=@var{string}
+Always quote characters from @var{string}, even if the selected
+quoting style would not quote them (@pxref{quoting styles}).
+
+@opsummary{quoting-style}
+@item --quoting-style=@var{style}
+Set quoting style to use when printing member and file names
+(@pxref{quoting styles}). Valid @var{style} values are:
+@code{literal}, @code{shell}, @code{shell-always}, @code{c},
+@code{escape}, @code{locale}, and @code{clocale}. Default quoting
+style is @code{escape}, unless overridden while configuring the
+package.
+
+@opsummary{pax-option}
+@item --pax-option=@var{keyword-list}
+This option is meaningful only with @acronym{POSIX.1-2001} archives
+(@pxref{posix}). It modifies the way @command{tar} handles the
+extended header keywords. @var{Keyword-list} is a comma-separated
+list of keyword options. @xref{PAX keywords}, for a detailed
+discussion.
+@opsummary{portability}
@item --portability
@itemx --old-archive
Synonym for @option{--format=v7}.
+@opsummary{posix}
@item --posix
Same as @option{--format=posix}.
+@opsummary{preserve}
@item --preserve
-Synonymous with specifying both @samp{--preserve-permissions} and
-@samp{--same-order}. @FIXME-xref{}
+Synonymous with specifying both @option{--preserve-permissions} and
+@option{--same-order}. @xref{Setting Access Permissions}.
+@opsummary{preserve-order}
@item --preserve-order
-(See @samp{--same-order}; @pxref{Reading}.)
+(See @option{--same-order}; @pxref{Reading}.)
+@opsummary{preserve-permissions}
+@opsummary{same-permissions}
@item --preserve-permissions
@itemx --same-permissions
@itemx -p
users' umask from the permissions specified in the archive and uses
that number as the permissions to create the destination file.
Specifying this option instructs @command{tar} that it should use the
-permissions directly from the archive. @xref{Writing}.
+permissions directly from the archive. @xref{Setting Access Permissions}.
+@opsummary{read-full-records}
@item --read-full-records
@itemx -B
Specifies that @command{tar} should reblock its input, for reading
from pipes on systems with buggy implementations. @xref{Reading}.
+@opsummary{record-size}
@item --record-size=@var{size}
Instructs @command{tar} to use @var{size} bytes per record when accessing the
-archive. @FIXME-xref{}
+archive. @xref{Blocking Factor}.
+@opsummary{recursion}
@item --recursion
With this option, @command{tar} recurses into directories.
-@FIXME-xref{}
+@xref{recurse}.
+@opsummary{recursive-unlink}
@item --recursive-unlink
Remove existing
directory hierarchies before extracting directories of the same name
-from the archive. @xref{Writing}.
+from the archive. @xref{Recursive Unlink}.
+@opsummary{remove-files}
@item --remove-files
Directs @command{tar} to remove the source file from the file system after
-appending it to an archive. @FIXME-xref{}
+appending it to an archive. @xref{remove files}.
+
+@opsummary{restrict}
+@item --restrict
+Disable use of some potentially harmful @command{tar} options.
+Currently this option disables shell invocation from multi-volume menu
+(@pxref{Using Multiple Tapes}).
+
+@opsummary{rmt-command}
+@item --rmt-command=@var{cmd}
+
+Notifies @command{tar} that it should use @var{cmd} instead of
+the default @file{/usr/libexec/rmt} (@pxref{Remote Tape Server}).
+
+@opsummary{rsh-command}
@item --rsh-command=@var{cmd}
Notifies @command{tar} that is should use @var{cmd} to communicate with remote
-devices. @FIXME-xref{}
+devices. @xref{Device}.
+@opsummary{same-order}
@item --same-order
@itemx --preserve-order
@itemx -s
arguments has already been sorted to match the order of files in the
archive. @xref{Reading}.
+@opsummary{same-owner}
@item --same-owner
When extracting an archive, @command{tar} will attempt to preserve the owner
specified in the @command{tar} archive with this option present.
This is the default behavior for the superuser; this option has an
-effect only for ordinary users. @FIXME-xref{}
+effect only for ordinary users. @xref{Attributes}.
+@opsummary{same-permissions}
@item --same-permissions
-(See @samp{--preserve-permissions}; @pxref{Writing}.)
+(See @option{--preserve-permissions}; @pxref{Setting Access Permissions}.)
+@opsummary{show-defaults}
@item --show-defaults
Displays the default options used by @command{tar} and exits
-successfully. This option is intended for use in shell scripts.
+successfully. This option is intended for use in shell scripts.
Here is an example of what you can see using this option:
@smallexample
$ tar --show-defaults
---format=gnu -f- -b20
+--format=gnu -f- -b20 --quoting-style=escape \
+--rmt-command=/usr/libexec/rmt --rsh-command=/usr/bin/rsh
@end smallexample
+@opsummary{show-omitted-dirs}
@item --show-omitted-dirs
Instructs @command{tar} to mention directories its skipping over when
-operating on a @command{tar} archive. @FIXME-xref{}
+operating on a @command{tar} archive. @xref{show-omitted-dirs}.
-@item --sparse
+@opsummary{show-transformed-names}
+@opsummary{show-stored-names}
+@item --show-transformed-names
+@itemx --show-stored-names
+
+Display file or member names after applying any transformations
+(@pxref{transform}). In particular, when used in conjunction with one of
+archive creation operations it instructs tar to list the member names
+stored in the archive, as opposed to the actual file
+names. @xref{listing member and file names}.
+
+@opsummary{sparse}
+@item --sparse
@itemx -S
Invokes a @acronym{GNU} extension when adding files to an archive that handles
-sparse files efficiently. @FIXME-xref{}
+sparse files efficiently. @xref{sparse}.
+
+@opsummary{sparse-version}
+@item --sparse-version=@var{version}
+Specified the @dfn{format version} to use when archiving sparse
+files. Implies @option{--sparse}. @xref{sparse}. For the description
+of the supported sparse formats, @xref{Sparse Formats}.
+
+@opsummary{starting-file}
@item --starting-file=@var{name}
@itemx -K @var{name}
files in the archive until it finds one that matches @var{name}.
@xref{Scarce}.
-@item --strip-path=@var{number}
+@opsummary{strip-components}
+@item --strip-components=@var{number}
Strip given @var{number} of leading components from file names before
-extraction. For example, if archive @file{archive.tar} contained
+extraction.@footnote{This option was called @option{--strip-path} in
+version 1.14.} For example, if archive @file{archive.tar} contained
@file{/some/file/name}, then running
@smallexample
-tar --extract --file archive.tar --strip-path=2
+tar --extract --file archive.tar --strip-components=2
@end smallexample
@noindent
-would extracted this file to file @file{name}.
+would extract this file to file @file{name}.
+@opsummary{suffix}, summary
@item --suffix=@var{suffix}
Alters the suffix @command{tar} uses when backing up files from the default
-@samp{~}. @FIXME-xref{}
+@samp{~}. @xref{backup}.
+@opsummary{tape-length}
@item --tape-length=@var{num}
@itemx -L @var{num}
Specifies the length of tapes that @command{tar} is writing as being
-@w{@var{num} x 1024} bytes long. @FIXME-xref{}
+@w{@var{num} x 1024} bytes long. @xref{Using Multiple Tapes}.
+
+@opsummary{test-label}
+@item --test-label
+
+Reads the volume label. If an argument is specified, test whether it
+matches the volume label. @xref{--test-label option}.
+
+@opsummary{to-command}
+@item --to-command=@var{command}
+During extraction @command{tar} will pipe extracted files to the
+standard input of @var{command}. @xref{Writing to an External Program}.
+
+@opsummary{to-stdout}
@item --to-stdout
@itemx -O
During extraction, @command{tar} will extract files to stdout rather
-than to the file system. @xref{Writing}.
+than to the file system. @xref{Writing to Standard Output}.
-@item --totals
+@opsummary{totals}
+@item --totals[=@var{signo}]
-Displays the total number of bytes written after creating an archive.
-@FIXME-xref{}
+Displays the total number of bytes transferred when processing an
+archive. If an argument is given, these data are displayed on
+request, when signal @var{signo} is delivered to @command{tar}.
+@xref{totals}.
+@opsummary{touch}
@item --touch
@itemx -m
-Sets the modification time of extracted files to the extraction time,
-rather than the modification time stored in the archive.
-@xref{Writing}.
+Sets the data modification time of extracted files to the extraction time,
+rather than the data modification time stored in the archive.
+@xref{Data Modification Times}.
+@opsummary{uncompress}
@item --uncompress
-(See @samp{--compress}.) @FIXME-pxref{}
+(See @option{--compress}. @pxref{gzip})
+@opsummary{ungzip}
@item --ungzip
-(See @samp{--gzip}.) @FIXME-pxref{}
+(See @option{--gzip}. @pxref{gzip})
+@opsummary{unlink-first}
@item --unlink-first
@itemx -U
Directs @command{tar} to remove the corresponding file from the file
-system before extracting it from the archive. @xref{Writing}.
+system before extracting it from the archive. @xref{Unlink First}.
+
+@opsummary{unquote}
+@item --unquote
+Enable unquoting input file or member names (default). @xref{input
+name quoting}.
+@opsummary{use-compress-program}
@item --use-compress-program=@var{prog}
Instructs @command{tar} to access the archive through @var{prog}, which is
-presumed to be a compression program of some sort. @FIXME-xref{}
+presumed to be a compression program of some sort. @xref{gzip}.
+@opsummary{utc}
@item --utc
-Display file modification dates in @acronym{UTC}. This option implies
-@samp{--verbose}.
+Display file modification dates in @acronym{UTC}. This option implies
+@option{--verbose}.
+@opsummary{verbose}
@item --verbose
@itemx -v
Specifies that @command{tar} should be more verbose about the operations its
performing. This option can be specified multiple times for some
-operations to increase the amount of information displayed. @FIXME-xref{}
+operations to increase the amount of information displayed.
+@xref{verbose}.
+@opsummary{verify}
@item --verify
@itemx -W
Verifies that the archive was correctly written when creating an
-archive. @FIXME-xref{}
+archive. @xref{verify}.
+@opsummary{version}
@item --version
-@command{tar} will print an informational message about what version
-it is and a copyright message, some credits, and then exit.
-@FIXME-xref{}
+Print information about the program's name, version, origin and legal
+status, all on standard output, and then exit successfully.
+@xref{help}.
+@opsummary{volno-file}
@item --volno-file=@var{file}
-Used in conjunction with @samp{--multi-volume}. @command{tar} will keep track
-of which volume of a multi-volume archive its working in @var{file}.
-@FIXME-xref{}
+Used in conjunction with @option{--multi-volume}. @command{tar} will
+keep track of which volume of a multi-volume archive its working in
+@var{file}. @xref{volno-file}.
+@opsummary{wildcards}
@item --wildcards
-Use wildcards when excluding files.
-@FIXME-xref{}
+Use wildcards when matching member names with patterns.
+@xref{controlling pattern-matching}.
+@opsummary{wildcards-match-slash}
@item --wildcards-match-slash
-Wildcards match @samp{/} when excluding files.
-@FIXME-xref{}
+Wildcards match @samp{/}.
+@xref{controlling pattern-matching}.
@end table
@node Short Option Summary
Here is an alphabetized list of all of the short option forms, matching
them with the equivalent long option.
-@table @kbd
-
-@item -A
-
-@samp{--concatenate}
-
-@item -B
-
-@samp{--read-full-records}
-
-@item -C
-
-@samp{--directory}
-
-@item -F
-
-@samp{--info-script}
-
-@item -G
-
-@samp{--incremental}
-
-@item -K
-
-@samp{--starting-file}
-
-@item -L
-
-@samp{--tape-length}
-
-@item -M
-
-@samp{--multi-volume}
-
-@item -N
-
-@samp{--newer}
-
-@item -O
+@multitable @columnfractions 0.20 0.80
+@headitem Short Option @tab Reference
-@samp{--to-stdout}
+@item -A @tab @ref{--concatenate}.
-@item -P
+@item -B @tab @ref{--read-full-records}.
-@samp{--absolute-names}
+@item -C @tab @ref{--directory}.
-@item -R
+@item -F @tab @ref{--info-script}.
-@samp{--block-number}
+@item -G @tab @ref{--incremental}.
-@item -S
-
-@samp{--sparse}
-
-@item -T
-
-@samp{--files-from}
-
-@item -U
-
-@samp{--unlink-first}
-
-@item -V
-
-@samp{--label}
-
-@item -W
-
-@samp{--verify}
-
-@item -X
-
-@samp{--exclude-from}
-
-@item -Z
+@item -K @tab @ref{--starting-file}.
-@samp{--compress}
+@item -L @tab @ref{--tape-length}.
-@item -b
+@item -M @tab @ref{--multi-volume}.
-@samp{--blocking-factor}
+@item -N @tab @ref{--newer}.
-@item -c
+@item -O @tab @ref{--to-stdout}.
-@samp{--create}
+@item -P @tab @ref{--absolute-names}.
-@item -d
+@item -R @tab @ref{--block-number}.
-@samp{--compare}
+@item -S @tab @ref{--sparse}.
-@item -f
-
-@samp{--file}
-
-@item -g
-
-@samp{--listed-incremental}
-
-@item -h
-
-@samp{--dereference}
-
-@item -i
-
-@samp{--ignore-zeros}
-
-@item -j
+@item -T @tab @ref{--files-from}.
-@samp{--bzip2}
+@item -U @tab @ref{--unlink-first}.
-@item -k
+@item -V @tab @ref{--label}.
-@samp{--keep-old-files}
+@item -W @tab @ref{--verify}.
-@item -l
+@item -X @tab @ref{--exclude-from}.
-@samp{--one-file-system}. Use of this short option is deprecated. It
-is retained for compatibility with the earlier versions of GNU
-@command{tar}, and will be changed in future releases.
+@item -Z @tab @ref{--compress}.
-@xref{Current status}, for more information.
+@item -b @tab @ref{--blocking-factor}.
-@item -m
-
-@samp{--touch}
-
-@item -o
+@item -c @tab @ref{--create}.
-When creating --- @samp{--no-same-owner}, when extracting ---
-@samp{--portability}.
+@item -d @tab @ref{--compare}.
-The later usage is deprecated. It is retained for compatibility with
-the earlier versions of @GNUTAR{}. In the future releases
-@option{-o} will be equivalent to @samp{--no-same-owner} only.
+@item -f @tab @ref{--file}.
-@item -p
+@item -g @tab @ref{--listed-incremental}.
-@samp{--preserve-permissions}
+@item -h @tab @ref{--dereference}.
-@item -r
+@item -i @tab @ref{--ignore-zeros}.
-@samp{--append}
+@item -j @tab @ref{--bzip2}.
-@item -s
+@item -k @tab @ref{--keep-old-files}.
-@samp{--same-order}
+@item -l @tab @ref{--check-links}.
-@item -t
+@item -m @tab @ref{--touch}.
-@samp{--list}
+@item -o @tab When creating, @ref{--no-same-owner}, when extracting ---
+@ref{--portability}.
-@item -u
+The later usage is deprecated. It is retained for compatibility with
+the earlier versions of @GNUTAR{}. In the future releases
+@option{-o} will be equivalent to @option{--no-same-owner} only.
-@samp{--update}
+@item -p @tab @ref{--preserve-permissions}.
-@item -v
+@item -r @tab @ref{--append}.
-@samp{--verbose}
+@item -s @tab @ref{--same-order}.
-@item -w
+@item -t @tab @ref{--list}.
-@samp{--interactive}
+@item -u @tab @ref{--update}.
-@item -x
+@item -v @tab @ref{--verbose}.
-@samp{--extract}
+@item -w @tab @ref{--interactive}.
-@item -z
+@item -x @tab @ref{--extract}.
-@samp{--gzip}
+@item -z @tab @ref{--gzip}.
-@end table
+@end multitable
@node help
@section @GNUTAR{} documentation
+@cindex Getting program version number
+@opindex version
+@cindex Version of the @command{tar} program
Being careful, the first thing is really checking that you are using
-@GNUTAR{}, indeed. The @value{op-version} option
-will generate a message giving confirmation that you are using
-@GNUTAR{}, with the precise version of @GNUTAR{}
-you are using. @command{tar} identifies itself and
-prints the version number to the standard output, then immediately
-exits successfully, without doing anything else, ignoring all other
-options. For example, @w{@samp{tar --version}} might return:
+@GNUTAR{}, indeed. The @option{--version} option
+causes @command{tar} to print information about its name, version,
+origin and legal status, all on standard output, and then exit
+successfully. For example, @w{@samp{tar --version}} might print:
@smallexample
-tar (@acronym{GNU} tar) @value{VERSION}
+tar (GNU tar) @value{VERSION}
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms
+of the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by John Gilmore and Jay Fenlason.
@end smallexample
@noindent
contains@footnote{There are plans to merge the @command{cpio} and
@command{tar} packages into a single one which would be called
@code{paxutils}. So, who knows if, one of this days, the
-@value{op-version} would not yield @w{@samp{tar (@acronym{GNU}
+@option{--version} would not output @w{@samp{tar (@acronym{GNU}
paxutils) 3.2}}}.
+@cindex Obtaining help
+@cindex Listing all @command{tar} options
+@xopindex{help, introduction}
Another thing you might want to do is checking the spelling or meaning
of some particular @command{tar} option, without resorting to this
manual, for once you have carefully read it. @GNUTAR{}
has a short help feature, triggerable through the
-@value{op-help} option. By using this option, @command{tar} will
+@option{--help} option. By using this option, @command{tar} will
print a usage message listing all available options on standard
output, then exit successfully, without doing anything else and
ignoring all other options. Even if this is only a brief summary, it
presuming, here, that you like using @command{less} for a pager. Other
popular pagers are @command{more} and @command{pg}. If you know about some
@var{keyword} which interests you and do not want to read all the
-@value{op-help} output, another common idiom is doing:
+@option{--help} output, another common idiom is doing:
@smallexample
tar --help | grep @var{keyword}
@end smallexample
@noindent
-for getting only the pertinent lines.
+for getting only the pertinent lines. Notice, however, that some
+@command{tar} options have long description lines and the above
+command will list only the first of them.
-The perceptive reader would have noticed some contradiction in the
-previous paragraphs. It is written that both @value{op-version} and
-@value{op-help} print something, and have all other options ignored. In
-fact, they cannot ignore each other, and one of them has to win. We do
-not specify which is stronger, here; experiment if you really wonder!
+The exact look of the option summary displayed by @kbd{tar --help} is
+configurable. @xref{Configuring Help Summary}, for a detailed description.
+
+@opindex usage
+If you only wish to check the spelling of an option, running @kbd{tar
+--usage} may be a better choice. This will display a terse list of
+@command{tar} option without accompanying explanations.
The short help output is quite succinct, and you might have to get
back to the full documentation for precise points. If you are reading
this paragraph, you already have the @command{tar} manual in some
-form. This manual is available in printed form, as a kind of small
-book. It may printed out of the @GNUTAR{}
+form. This manual is available in a variety of forms from
+@url{http://www.gnu.org/software/tar/manual}. It may be printed out of the @GNUTAR{}
distribution, provided you have @TeX{} already installed somewhere,
and a laser printer around. Just configure the distribution, execute
the command @w{@samp{make dvi}}, then print @file{doc/tar.dvi} the
There is currently no @code{man} page for @GNUTAR{}.
If you observe such a @code{man} page on the system you are running,
-either it does not long to @GNUTAR{}, or it has not
-been produced by @acronym{GNU}. Currently, @GNUTAR{}
-documentation is provided in Texinfo format only, if we
-except, of course, the short result of @kbd{tar --help}.
+either it does not belong to @GNUTAR{}, or it has not
+been produced by @acronym{GNU}. Some package maintainers convert
+@kbd{tar --help} output to a man page, using @command{help2man}. In
+any case, please bear in mind that the authoritative source of
+information about @GNUTAR{} is this Texinfo documentation.
-@node verbose
-@section Checking @command{tar} progress
+@node defaults
+@section Obtaining @GNUTAR{} default values
-@cindex Progress information
-@cindex Status information
-@cindex Information on progress and status of operations
-@cindex Verbose operation
-@cindex Block number where error occurred
-@cindex Error message, block number of
-@cindex Version of the @command{tar} program
+@opindex show-defaults
+@GNUTAR{} has some predefined defaults that are used when you do not
+explicitly specify another values. To obtain a list of such
+defaults, use @option{--show-defaults} option. This will output the
+values in the form of @command{tar} command line options:
+
+@smallexample
+@group
+@kbd{tar --show-defaults}
+--format=gnu -f- -b20 --quoting-style=escape
+--rmt-command=/etc/rmt --rsh-command=/usr/bin/rsh
+@end group
+@end smallexample
+
+@noindent
+Notice, that this option outputs only one line. The example output above
+has been split to fit page boundaries.
+
+@noindent
+The above output shows that this version of @GNUTAR{} defaults to
+using @samp{gnu} archive format (@pxref{Formats}), it uses standard
+output as the archive, if no @option{--file} option has been given
+(@pxref{file tutorial}), the default blocking factor is 20
+(@pxref{Blocking Factor}). It also shows the default locations where
+@command{tar} will look for @command{rmt} and @command{rsh} binaries.
-@cindex Getting more information during the operation
-@cindex Information during operation
-@cindex Feedback from @command{tar}
+@node verbose
+@section Checking @command{tar} progress
Typically, @command{tar} performs most operations without reporting any
information to the user except error messages. When using @command{tar}
message in order to solve the problem. The following options can be
helpful diagnostic tools.
-Normally, the @value{op-list} command to list an archive prints just
-the file names (one per line) and the other commands are silent.
-When used with most operations, the @value{op-verbose} option causes
-@command{tar} to print the name of each file or archive member as it
-is processed. This and the other options which make @command{tar} print
-status information can be useful in monitoring @command{tar}.
-
-With @value{op-create} or @value{op-extract}, @value{op-verbose} used once
-just prints the names of the files or members as they are processed.
-Using it twice causes @command{tar} to print a longer listing (reminiscent
-of @samp{ls -l}) for each member. Since @value{op-list} already prints
-the names of the members, @value{op-verbose} used once with @value{op-list}
-causes @command{tar} to print an @samp{ls -l} type listing of the files
-in the archive. The following examples both extract members with
-long list output:
+@cindex Verbose operation
+@opindex verbose
+Normally, the @option{--list} (@option{-t}) command to list an archive
+prints just the file names (one per line) and the other commands are
+silent. When used with most operations, the @option{--verbose}
+(@option{-v}) option causes @command{tar} to print the name of each
+file or archive member as it is processed. This and the other options
+which make @command{tar} print status information can be useful in
+monitoring @command{tar}.
+
+With @option{--create} or @option{--extract}, @option{--verbose} used
+once just prints the names of the files or members as they are processed.
+Using it twice causes @command{tar} to print a longer listing
+(@xref{verbose member listing}, for the description) for each member.
+Since @option{--list} already prints the names of the members,
+@option{--verbose} used once with @option{--list} causes @command{tar}
+to print an @samp{ls -l} type listing of the files in the archive.
+The following examples both extract members with long list output:
@smallexample
$ @kbd{tar --extract --file=archive.tar --verbose --verbose}
verbose output to @var{file} rather than to standard output or standard
error.
-The @value{op-totals} option---which is only meaningful when used with
-@value{op-create}---causes @command{tar} to print the total
-amount written to the archive, after it has been fully created.
+@anchor{totals}
+@cindex Obtaining total status information
+@opindex totals
+The @option{--totals} option causes @command{tar} to print on the
+standard error the total amount of bytes transferred when processing
+an archive. When creating or appending to an archive, this option
+prints the number of bytes written to the archive and the average
+speed at which they have been written, e.g.:
+
+@smallexample
+@group
+$ @kbd{tar -c -f archive.tar --totals /home}
+Total bytes written: 7924664320 (7.4GiB, 85MiB/s)
+@end group
+@end smallexample
+
+When reading an archive, this option displays the number of bytes
+read:
+
+@smallexample
+@group
+$ @kbd{tar -x -f archive.tar --totals}
+Total bytes read: 7924664320 (7.4GiB, 95MiB/s)
+@end group
+@end smallexample
+
+Finally, when deleting from an archive, the @option{--totals} option
+displays both numbers plus number of bytes removed from the archive:
+
+@smallexample
+@group
+$ @kbd{tar --delete -f foo.tar --totals --wildcards '*~'}
+Total bytes read: 9543680 (9.2MiB, 201MiB/s)
+Total bytes written: 3829760 (3.7MiB, 81MiB/s)
+Total bytes deleted: 1474048
+@end group
+@end smallexample
+
+You can also obtain this information on request. When
+@option{--totals} is used with an argument, this argument is
+interpreted as a symbolic name of a signal, upon delivery of which the
+statistics is to be printed:
+
+@table @option
+@item --totals=@var{signo}
+Print statistics upon delivery of signal @var{signo}. Valid arguments
+are: @code{SIGHUP}, @code{SIGQUIT}, @code{SIGINT}, @code{SIGUSR1} and
+@code{SIGUSR2}. Shortened names without @samp{SIG} prefix are also
+accepted.
+@end table
+
+Both forms of @option{--totals} option can be used simultaneously.
+Thus, @kbd{tar -x --totals --totals=USR1} instructs @command{tar} to
+extract all members from its default archive and print statistics
+after finishing the extraction, as well as when receiving signal
+@code{SIGUSR1}.
-The @value{op-checkpoint} option prints an occasional message
-as @command{tar} reads or writes the archive. In fact, it print
-directory names while reading the archive. It is designed for
+@anchor{Progress information}
+@cindex Progress information
+@opindex checkpoint
+The @option{--checkpoint} option prints an occasional message
+as @command{tar} reads or writes the archive. It is designed for
those who don't need the more detailed (and voluminous) output of
-@value{op-block-number}, but do want visual confirmation that @command{tar}
-is actually making forward progress.
+@option{--block-number} (@option{-R}), but do want visual confirmation
+that @command{tar} is actually making forward progress. By default it
+prints a message each 10 records read or written. This can be changed
+by giving it a numeric argument after an equal sign:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000} /var
+tar: Write checkpoint 1000
+tar: Write checkpoint 2000
+tar: Write checkpoint 3000
+@end smallexample
+
+This example shows the default checkpoint message used by
+@command{tar}. If you place a dot immediately after the equal
+sign, it will print a @samp{.} at each checkpoint. For example:
-@FIXME{There is some confusion here. It seems that -R once wrote a
-message at @samp{every} record read or written.}
+@smallexample
+$ @kbd{tar -c --checkpoint=.1000} /var
+...
+@end smallexample
-The @value{op-show-omitted-dirs} option, when reading an archive---with
-@value{op-list} or @value{op-extract}, for example---causes a message
+@opindex show-omitted-dirs
+@anchor{show-omitted-dirs}
+The @option{--show-omitted-dirs} option, when reading an archive---with
+@option{--list} or @option{--extract}, for example---causes a message
to be printed for each directory in the archive which is skipped.
This happens regardless of the reason for skipping: the directory might
not have been named on the command line (implicitly or explicitly),
-it might be excluded by the use of the @value{op-exclude} option, or
-some other reason.
+it might be excluded by the use of the
+@option{--exclude=@var{pattern}} option, or some other reason.
-If @value{op-block-number} is used, @command{tar} prints, along with
+@opindex block-number
+@cindex Block number where error occurred
+@anchor{block-number}
+If @option{--block-number} (@option{-R}) is used, @command{tar} prints, along with
every message it would normally produce, the block number within the
archive where the message was triggered. Also, supplementary messages
are triggered when reading blocks full of NULs, or when hitting end of
file on the archive. As of now, if the archive if properly terminated
with a NUL block, the reading of the file may stop before end of file
is met, so the position of end of file will not usually show when
-@value{op-block-number} is used. Note that @GNUTAR{}
+@option{--block-number} (@option{-R}) is used. Note that @GNUTAR{}
drains the archive before exiting when reading the
archive from a pipe.
+@cindex Error message, block number of
This option is especially useful when reading damaged archives, since
it helps pinpoint the damaged sections. It can also be used with
-@value{op-list} when listing a file-system backup tape, allowing you to
+@option{--list} (@option{-t}) when listing a file-system backup tape, allowing you to
choose among several backup tapes when retrieving a file later, in
favor of the tape where the file appears earliest (closest to the
-front of the tape). @FIXME-xref{when the node name is set and the
-backup section written.}
+front of the tape). @xref{backup}.
@node interactive
@section Asking for Confirmation During Operations
exclude some files and archive members from the operation (for instance
if disk or storage space is tight). You can do this by excluding
certain files automatically (@pxref{Choosing}), or by performing
-an operation interactively, using the @value{op-interactive} option.
-@command{tar} also accepts @samp{--confirmation} for this option.
+an operation interactively, using the @option{--interactive} (@option{-w}) option.
+@command{tar} also accepts @option{--confirmation} for this option.
-When the @value{op-interactive} option is specified, before
+@opindex interactive
+When the @option{--interactive} (@option{-w}) option is specified, before
reading, writing, or deleting files, @command{tar} first prints a message
for each such file, telling what operation it intends to take, then asks
for confirmation on the terminal. The actions which require
@node Basic tar
@section Basic @GNUTAR{} Operations
-The basic @command{tar} operations, @value{op-create}, @value{op-list} and
-@value{op-extract}, are currently presented and described in the tutorial
+The basic @command{tar} operations, @option{--create} (@option{-c}),
+@option{--list} (@option{-t}) and @option{--extract} (@option{--get},
+@option{-x}), are currently presented and described in the tutorial
chapter of this manual. This section provides some complementary notes
for these operations.
-@table @asis
-@item @value{op-create}
+@table @option
+@xopindex{create, complementary notes}
+@item --create
+@itemx -c
Creating an empty archive would have some kind of elegance. One can
-initialize an empty archive and later use @value{op-append} for adding
-all members. Some applications would not welcome making an exception
-in the way of adding the first archive member. On the other hand,
-many people reported that it is dangerously too easy for @command{tar}
-to destroy a magnetic tape with an empty archive@footnote{This is well
-described in @cite{Unix-haters Handbook}, by Simson Garfinkel, Daniel
-Weise & Steven Strassmann, IDG Books, ISBN 1-56884-203-1.}. The two most
-common errors are:
+initialize an empty archive and later use @option{--append}
+(@option{-r}) for adding all members. Some applications would not
+welcome making an exception in the way of adding the first archive
+member. On the other hand, many people reported that it is
+dangerously too easy for @command{tar} to destroy a magnetic tape with
+an empty archive@footnote{This is well described in @cite{Unix-haters
+Handbook}, by Simson Garfinkel, Daniel Weise & Steven Strassmann, IDG
+Books, ISBN 1-56884-203-1.}. The two most common errors are:
@enumerate
@item
file, which was meant to be saved, is rather destroyed.
@end enumerate
-So, recognizing the likelihood and the catastrophical nature of these
+So, recognizing the likelihood and the catastrophic nature of these
errors, @GNUTAR{} now takes some distance from elegance, and
-cowardly refuses to create an archive when @value{op-create} option is
-given, there are no arguments besides options, and @value{op-files-from}
-option is @emph{not} used. To get around the cautiousness of @GNUTAR{}
-and nevertheless create an archive with nothing in it,
-one may still use, as the value for the @value{op-files-from} option,
-a file with no names in it, as shown in the following commands:
+cowardly refuses to create an archive when @option{--create} option is
+given, there are no arguments besides options, and
+@option{--files-from} (@option{-T}) option is @emph{not} used. To get
+around the cautiousness of @GNUTAR{} and nevertheless create an
+archive with nothing in it, one may still use, as the value for the
+@option{--files-from} option, a file with no names in it, as shown in
+the following commands:
@smallexample
@kbd{tar --create --file=empty-archive.tar --files-from=/dev/null}
@kbd{tar cfT empty-archive.tar /dev/null}
@end smallexample
-@item @value{op-extract}
+@xopindex{extract, complementary notes}
+@item --extract
+@itemx --get
+@itemx -x
A socket is stored, within a @GNUTAR{} archive, as a pipe.
-@item @value{op-list}
+@item @option{--list} (@option{-t})
@GNUTAR{} now shows dates as @samp{1996-08-30},
-while it used to show them as @samp{Aug 30 1996}. (One can revert to
-the old behavior by defining @code{USE_OLD_CTIME} in @file{src/list.c}
-before reinstalling.) But preferably, people should get used to ISO
-8601 dates. Local American dates should be made available again with
-full date localization support, once ready. In the meantime, programs
-not being localizable for dates should prefer international dates,
-that's really the way to go.
-
-Look up @url{http://www.ft.uni-erlangen.de/~mskuhn/iso-time.html} if you
+while it used to show them as @samp{Aug 30 1996}. Preferably,
+people should get used to ISO 8601 dates. Local American dates should
+be made available again with full date localization support, once
+ready. In the meantime, programs not being localizable for dates
+should prefer international dates, that's really the way to go.
+
+Look up @url{http://www.cl.cam.ac.uk/@/~mgk25/@/iso-time.html} if you
are curious, it contains a detailed explanation of the ISO 8601 standard.
@end table
In the last chapter, you learned about the first three operations to
@command{tar}. This chapter presents the remaining five operations to
-@command{tar}: @samp{--append}, @samp{--update}, @samp{--concatenate},
-@samp{--delete}, and @samp{--compare}.
+@command{tar}: @option{--append}, @option{--update}, @option{--concatenate},
+@option{--delete}, and @option{--compare}.
You are not likely to use these operations as frequently as those
covered in the last chapter; however, since they perform specialized
@samp{collection.tar} and @samp{music.tar}.
We will also use the archive files @samp{afiles.tar} and
-@samp{bfiles.tar}. @samp{afiles.tar} contains the members @samp{apple},
-@samp{angst}, and @samp{aspic}. @samp{bfiles.tar} contains the members
+@samp{bfiles.tar}. The archive @samp{afiles.tar} contains the members @samp{apple},
+@samp{angst}, and @samp{aspic}; @samp{bfiles.tar} contains the members
@samp{./birds}, @samp{baboon}, and @samp{./box}.
Unless we state otherwise, all practicing you do and examples you follow
The five operations that we will cover in this chapter are:
-@table @kbd
+@table @option
@item --append
@itemx -r
Add new entries to an archive that already exists.
@end table
@node append
-@subsection How to Add Files to Existing Archives: @code{--append}
+@subsection How to Add Files to Existing Archives: @option{--append}
@UNREVISED
+@opindex append
If you want to add files to an existing archive, you don't need to
-create a new archive; you can use @value{op-append}. The archive must
-already exist in order to use @samp{--append}. (A related operation
-is the @samp{--update} operation; you can use this to add newer
-versions of archive members to an existing archive. To learn how to
-do this with @samp{--update}, @pxref{update}.)
+create a new archive; you can use @option{--append} (@option{-r}).
+The archive must already exist in order to use @option{--append}. (A
+related operation is the @option{--update} operation; you can use this
+to add newer versions of archive members to an existing archive. To learn how to
+do this with @option{--update}, @pxref{update}.)
-If you use @value{op-append} to add a file that has the same name as an
+If you use @option{--append} to add a file that has the same name as an
archive member to an archive containing that archive member, then the
old member is not deleted. What does happen, however, is somewhat
complex. @command{tar} @emph{allows} you to have infinite number of files
with the same name. Some operations treat these same-named members no
differently than any other set of archive members: for example, if you
-view an archive with @value{op-list}, you will see all of those members
-listed, with their modification times, owners, etc.
+view an archive with @option{--list} (@option{-t}), you will see all
+of those members listed, with their data modification times, owners, etc.
Other operations don't deal with these members as perfectly as you might
-prefer; if you were to use @value{op-extract} to extract the archive,
+prefer; if you were to use @option{--extract} to extract the archive,
only the most recently added copy of a member with the same name as four
other members would end up in the working directory. This is because
-@samp{--extract} extracts an archive in the order the members appeared
+@option{--extract} extracts an archive in the order the members appeared
in the archive; the most recently archived members will be extracted
last. Additionally, an extracted member will @emph{replace} a file of
the same name which existed in the directory already, and @command{tar}
There exists a special option that allows you to get around this
behavior and extract (or list) only a particular copy of the file.
-This is @option{--occurrence} option. If you run @command{tar} with
-this option, it will extract only the first copy of the file. You
-may also give this option an argument specifying the number of
-copy to be extracted. Thus, for example if the archive
+This is @option{--occurrence} option. If you run @command{tar} with
+this option, it will extract only the first copy of the file. You
+may also give this option an argument specifying the number of
+copy to be extracted. Thus, for example if the archive
@file{archive.tar} contained three copies of file @file{myfile}, then
the command
@end smallexample
@noindent
-would extract only the second copy. @xref{Option Summary,---occurrence}, for the description of @value{op-occurrence} option.
+would extract only the second copy. @xref{Option
+Summary,---occurrence}, for the description of @option{--occurrence}
+option.
@FIXME{ hag -- you might want to incorporate some of the above into the
MMwtSN node; not sure. i didn't know how to make it simpler...
@cindex Members, replacing with other members
@cindex Replacing members with other members
-If you want to replace an archive member, use @value{op-delete} to
+If you want to replace an archive member, use @option{--delete} to
delete the member you want to remove from the archive, , and then use
-@samp{--append} to add the member you want to be in the archive. Note
+@option{--append} to add the member you want to be in the archive. Note
that you can not change the order of the archive; the most recently
added member will still appear last. In this sense, you cannot truly
``replace'' one member with another. (Replacing one member with another
@cindex Archives, Appending files to
The simplest way to add a file to an already existing archive is the
-@value{op-append} operation, which writes specified files into the
-archive whether or not they are already among the archived files.
-When you use @samp{--append}, you @emph{must} specify file name
+@option{--append} (@option{-r}) operation, which writes specified
+files into the archive whether or not they are already among the
+archived files.
+
+When you use @option{--append}, you @emph{must} specify file name
arguments, as there is no default. If you specify a file that already
exists in the archive, another copy of the file will be added to the
end of the archive. As with other operations, the member names of the
newly added files will be exactly the same as their names given on the
-command line. The @value{op-verbose} option will print out the names
-of the files as they are written into the archive.
+command line. The @option{--verbose} (@option{-v}) option will print
+out the names of the files as they are written into the archive.
-@samp{--append} cannot be performed on some tape drives, unfortunately,
+@option{--append} cannot be performed on some tape drives, unfortunately,
due to deficiencies in the formats those tape drives use. The archive
must be a valid @command{tar} archive, or else the results of using this
operation will be unpredictable. @xref{Media}.
-To demonstrate using @samp{--append} to add a file to an archive,
+To demonstrate using @option{--append} to add a file to an archive,
create a file called @file{rock} in the @file{practice} directory.
Make sure you are in the @file{practice} directory. Then, run the
following @command{tar} command to add @file{rock} to
@end smallexample
@noindent
-If you now use the @value{op-list} operation, you will see that
+If you now use the @option{--list} (@option{-t}) operation, you will see that
@file{rock} has been added to the archive:
@smallexample
$ @kbd{tar --list --file=collection.tar}
--rw-rw-rw- me user 28 1996-10-18 16:31 jazz
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
--rw-rw-rw- me user 20 1996-09-23 16:44 folk
--rw-rw-rw- me user 20 1996-09-23 16:44 rock
+-rw-r--r-- me user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me user 20 1996-09-23 16:44 rock
@end smallexample
-@FIXME{in theory, dan will (soon) try to turn this node into what it's
-title claims it will become...}
-
@node multiple
-@subsubsection Multiple Files with the Same Name
-
-You can use @value{op-append} to add copies of files which have been
-updated since the archive was created. (However, we do not recommend
-doing this since there is another @command{tar} option called
-@samp{--update}; @pxref{update} for more information. We describe this
-use of @samp{--append} here for the sake of completeness.) @FIXME{is
-this really a good idea, to give this whole description for something
-which i believe is basically a Stupid way of doing something? certain
-aspects of it show ways in which tar is more broken than i'd personally
-like to admit to, specifically the last sentence. On the other hand, i
-don't think it's a good idea to be saying that we explicitly don't
-recommend using something, but i can't see any better way to deal with
-the situation.}When you extract the archive, the older version will be
-effectively lost. This works because files are extracted from an
+@subsubsection Multiple Members with the Same Name
+
+You can use @option{--append} (@option{-r}) to add copies of files
+which have been updated since the archive was created. (However, we
+do not recommend doing this since there is another @command{tar}
+option called @option{--update}; @xref{update}, for more information.
+We describe this use of @option{--append} here for the sake of
+completeness.) When you extract the archive, the older version will
+be effectively lost. This works because files are extracted from an
archive in the order in which they were archived. Thus, when the
archive is extracted, a file archived later in time will replace a
-file of the same name which was archived earlier, even though the older
-version of the file will remain in the archive unless you delete all
-versions of the file.
+file of the same name which was archived earlier, even though the
+older version of the file will remain in the archive unless you delete
+all versions of the file.
Supposing you change the file @file{blues} and then append the changed
version to @file{collection.tar}. As you saw above, the original
@end smallexample
@noindent
-Because you specified the @samp{--verbose} option, @command{tar} has
+Because you specified the @option{--verbose} option, @command{tar} has
printed the name of the file being appended as it was acted on. Now
list the contents of the archive:
@smallexample
$ @kbd{tar --list --verbose --file=collection.tar}
--rw-rw-rw- me user 28 1996-10-18 16:31 jazz
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
--rw-rw-rw- me user 20 1996-09-23 16:44 folk
--rw-rw-rw- me user 20 1996-09-23 16:44 rock
--rw-rw-rw- me user 58 1996-10-24 18:30 blues
+-rw-r--r-- me user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me user 20 1996-09-23 16:44 rock
+-rw-r--r-- me user 58 1996-10-24 18:30 blues
@end smallexample
@noindent
the archive and running @samp{ls} on the directory.
If you wish to extract the first occurrence of the file @file{blues}
-from the archive, use @value{op-occurrence} option, as shown in
+from the archive, use @option{--occurrence} option, as shown in
the following example:
@smallexample
$ @kbd{tar --extract -vv --occurrence --file=collection.tar blues}
--rw-rw-rw- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me user 21 1996-09-23 16:44 blues
@end smallexample
-@xref{Writing}, for more information on @value{op-extract} and
+@xref{Writing}, for more information on @option{--extract} and
@xref{Option Summary, --occurrence}, for the description of
-@value{op-occurrence} option.
+@option{--occurrence} option.
@node update
@subsection Updating an Archive
@UNREVISED
@cindex Updating an archive
-In the previous section, you learned how to use @value{op-append} to add
-a file to an existing archive. A related operation is
-@value{op-update}. The @samp{--update} operation updates a @command{tar}
-archive by comparing the date of the specified archive members against
-the date of the file with the same name. If the file has been modified
-more recently than the archive member, then the newer version of the
-file is added to the archive (as with @value{op-append}).
-
-Unfortunately, you cannot use @samp{--update} with magnetic tape drives.
+@opindex update
+In the previous section, you learned how to use @option{--append} to
+add a file to an existing archive. A related operation is
+@option{--update} (@option{-u}). The @option{--update} operation
+updates a @command{tar} archive by comparing the date of the specified
+archive members against the date of the file with the same name. If
+the file has been modified more recently than the archive member, then
+the newer version of the file is added to the archive (as with
+@option{--append}).
+
+Unfortunately, you cannot use @option{--update} with magnetic tape drives.
The operation will fail.
@FIXME{other examples of media on which --update will fail? need to ask
charles and/or mib/thomas/dave shevett..}
-Both @samp{--update} and @samp{--append} work by adding to the end
+Both @option{--update} and @option{--append} work by adding to the end
of the archive. When you extract a file from the archive, only the
version stored last will wind up in the file system, unless you use
-the @value{op-backup} option. @FIXME-ref{Multiple Members with the
-Same Name}
+the @option{--backup} option. @xref{multiple}, for a detailed discussion.
@menu
* how to update::
@end menu
@node how to update
-@subsubsection How to Update an Archive Using @code{--update}
+@subsubsection How to Update an Archive Using @option{--update}
-You must use file name arguments with the @value{op-update} operation.
-If you don't specify any files, @command{tar} won't act on any files and
-won't tell you that it didn't do anything (which may end up confusing
-you).
+You must use file name arguments with the @option{--update}
+(@option{-u}) operation. If you don't specify any files,
+@command{tar} won't act on any files and won't tell you that it didn't
+do anything (which may end up confusing you).
-@FIXME{note: the above parenthetical added because in fact, this
-behavior just confused the author. :-) }
+@c note: the above parenthetical added because in fact, this
+@c behavior just confused the author. :-)
-To see the @samp{--update} option at work, create a new file,
+To see the @option{--update} option at work, create a new file,
@file{classical}, in your practice directory, and some extra text to the
file @file{blues}, using any text editor. Then invoke @command{tar} with
-the @samp{update} operation and the @value{op-verbose} option specified,
-using the names of all the files in the practice directory as file name
-arguments:
+the @samp{update} operation and the @option{--verbose} (@option{-v})
+option specified, using the names of all the files in the practice
+directory as file name arguments:
@smallexample
$ @kbd{tar --update -v -f collection.tar blues folk rock classical}
process. Tapes are not designed to go backward. @xref{Media}, for more
information about tapes.
-@value{op-update} is not suitable for performing backups for two
+@option{--update} (@option{-u}) is not suitable for performing backups for two
reasons: it does not change directory content entries, and it
lengthens the archive every time it is used. The @GNUTAR{}
options intended specifically for backups are more
efficient. If you need to run backups, please consult @ref{Backups}.
@node concatenate
-@subsection Combining Archives with @code{--concatenate}
+@subsection Combining Archives with @option{--concatenate}
@cindex Adding archives to an archive
@cindex Concatenating Archives
+@opindex concatenate
+@opindex catenate
+@c @cindex @option{-A} described
Sometimes it may be convenient to add a second archive onto the end of
an archive rather than adding individual files to the archive. To add
one or more archives to the end of another archive, you should use the
-@value{op-concatenate} operation.
-
-To use @samp{--concatenate}, name the archives to be concatenated on the
-command line. (Nothing happens if you don't list any.) The members,
-and their member names, will be copied verbatim from those archives. If
-this causes multiple members to have the same name, it does not delete
-any members; all the members with the same name coexist. @FIXME-ref{For
-information on how this affects reading the archive, Multiple
-Members with the Same Name.}
-
-To demonstrate how @samp{--concatenate} works, create two small archives
+@option{--concatenate} (@option{--catenate}, @option{-A}) operation.
+
+To use @option{--concatenate}, give the first archive with
+@option{--file} option and name the rest of archives to be
+concatenated on the command line. The members, and their member
+names, will be copied verbatim from those archives to the first one.
+@footnote{This can cause multiple members to have the same name, for
+information on how this affects reading the archive, @ref{multiple}.}
+The new, concatenated archive will be called by the same name as the
+one given with the @option{--file} option. As usual, if you omit
+@option{--file}, @command{tar} will use the value of the environment
+variable @env{TAPE}, or, if this has not been set, the default archive name.
+
+@FIXME{There is no way to specify a new name...}
+
+To demonstrate how @option{--concatenate} works, create two small archives
called @file{bluesrock.tar} and @file{folkjazz.tar}, using the relevant
files from @file{practice}:
@smallexample
$ @kbd{tar -cvf bluesrock.tar blues rock}
blues
-classical
+rock
$ @kbd{tar -cvf folkjazz.tar folk jazz}
folk
jazz
@smallexample
$ @kbd{tar -tvf bluesrock.tar}
--rw-rw-rw- melissa user 105 1997-01-21 19:42 blues
--rw-rw-rw- melissa user 33 1997-01-20 15:34 rock
-$ @kbd{tar -tvf folkjazz.tar}
--rw-rw-rw- melissa user 20 1996-09-23 16:44 folk
--rw-rw-rw- melissa user 65 1997-01-30 14:15 jazz
+-rw-r--r-- melissa user 105 1997-01-21 19:42 blues
+-rw-r--r-- melissa user 33 1997-01-20 15:34 rock
+$ @kbd{tar -tvf jazzfolk.tar}
+-rw-r--r-- melissa user 20 1996-09-23 16:44 folk
+-rw-r--r-- melissa user 65 1997-01-30 14:15 jazz
@end smallexample
We can concatenate these two archives with @command{tar}:
$ @kbd{tar --concatenate --file=bluesrock.tar jazzfolk.tar}
@end smallexample
-If you now list the contents of the @file{bluesclass.tar}, you will see
+If you now list the contents of the @file{bluesrock.tar}, you will see
that now it also contains the archive members of @file{jazzfolk.tar}:
@smallexample
$ @kbd{tar --list --file=bluesrock.tar}
blues
rock
-jazz
folk
+jazz
@end smallexample
-When you use @samp{--concatenate}, the source and target archives must
+When you use @option{--concatenate}, the source and target archives must
already exist and must have been created using compatible format
-parameters. @FIXME-pxref{Matching Format Parameters}The new,
-concatenated archive will be called by the same name as the first
-archive listed on the command line. @FIXME{is there a way to specify a
-new name?}
+parameters. Notice, that @command{tar} does not check whether the
+archives it concatenates have compatible formats, it does not
+even check if the files are really tar archives.
-Like @value{op-append}, this operation cannot be performed on some
+Like @option{--append} (@option{-r}), this operation cannot be performed on some
tape drives, due to deficiencies in the formats those tape drives use.
@cindex @code{concatenate} vs @command{cat}
@cindex @command{cat} vs @code{concatenate}
It may seem more intuitive to you to want or try to use @command{cat} to
-concatenate two archives instead of using the @samp{--concatenate}
+concatenate two archives instead of using the @option{--concatenate}
operation; after all, @command{cat} is the utility for combining files.
However, @command{tar} archives incorporate an end-of-file marker which
must be removed if the concatenated archives are to be read properly as
-one archive. @samp{--concatenate} removes the end-of-archive marker
+one archive. @option{--concatenate} removes the end-of-archive marker
from the target archive before each new archive is appended. If you use
@command{cat} to combine the archives, the result will not be a valid
@command{tar} format archive. If you need to retrieve files from an
archive that was added to using the @command{cat} utility, use the
-@value{op-ignore-zeros} option. @xref{Ignore Zeros}, for further
+@option{--ignore-zeros} (@option{-i}) option. @xref{Ignore Zeros}, for further
information on dealing with archives improperly combined using the
@command{cat} shell utility.
-@FIXME{this shouldn't go here. where should it go?} You must specify
-the source archives using @value{op-file} (@value{pxref-file}). If you
-do not specify the target archive, @command{tar} uses the value of the
-environment variable @env{TAPE}, or, if this has not been set, the
-default archive name.
-
@node delete
-@subsection Removing Archive Members Using @samp{--delete}
+@subsection Removing Archive Members Using @option{--delete}
@UNREVISED
@cindex Deleting files from an archive
@cindex Removing files from an archive
-You can remove members from an archive by using the @value{op-delete}
-option. Specify the name of the archive with @value{op-file} and then
-specify the names of the members to be deleted; if you list no member
-names, nothing will be deleted. The @value{op-verbose} option will
-cause @command{tar} to print the names of the members as they are deleted.
-As with @value{op-extract}, you must give the exact member names when
-using @samp{tar --delete}. @samp{--delete} will remove all versions of
-the named file from the archive. The @samp{--delete} operation can run
-very slowly.
+@opindex delete
+You can remove members from an archive by using the @option{--delete}
+option. Specify the name of the archive with @option{--file}
+(@option{-f}) and then specify the names of the members to be deleted;
+if you list no member names, nothing will be deleted. The
+@option{--verbose} option will cause @command{tar} to print the names
+of the members as they are deleted. As with @option{--extract}, you
+must give the exact member names when using @samp{tar --delete}.
+@option{--delete} will remove all versions of the named file from the
+archive. The @option{--delete} operation can run very slowly.
-Unlike other operations, @samp{--delete} has no short form.
+Unlike other operations, @option{--delete} has no short form.
-@cindex Tapes, using @code{--delete} and
+@cindex Tapes, using @option{--delete} and
@cindex Deleting from tape archives
This operation will rewrite the archive. You can only use
-@samp{--delete} on an archive if the archive device allows you to
+@option{--delete} on an archive if the archive device allows you to
write to any point on the media, such as a disk; because of this, it
does not work on magnetic tapes. Do not try to delete an archive member
from a magnetic tape; the action will not succeed, and you will be
folk
jazz
rock
-practice/blues
-practice/folk
-practice/jazz
-practice/rock
-practice/blues
$ @kbd{tar --delete --file=collection.tar blues}
$ @kbd{tar --list --file=collection.tar}
folk
$
@end smallexample
-@FIXME{I changed the order of these nodes around and haven't had a chance
-to fix the above example's results, yet. I have to play with this and
-follow it and see what it actually does!}
+@FIXME{Check if the above listing is actually produced after running
+all the examples on collection.tar.}
-The @value{op-delete} option has been reported to work properly when
+The @option{--delete} option has been reported to work properly when
@command{tar} acts as a filter from @code{stdin} to @code{stdout}.
@node compare
@cindex Verifying the currency of an archive
@UNREVISED
-The @samp{--compare} (@samp{-d}), or @samp{--diff} operation compares
+@opindex compare
+The @option{--compare} (@option{-d}), or @option{--diff} operation compares
specified archive members against files with the same names, and then
reports differences in file size, mode, owner, modification date and
contents. You should @emph{only} specify archive member names, not file
tar: funk not found in archive
@end smallexample
-@noindent
-@FIXME{what does this actually depend on? i'm making a guess,
-here.}Depending on the system where you are running @command{tar} and the
-version you are running, @command{tar} may have a different error message,
-such as:
-
-@smallexample
-funk: does not exist
-@end smallexample
-
-@FIXME-xref{somewhere, for more information about format parameters.
-Melissa says: such as "format variations"? But why? Clearly I don't
-get it yet; I'll deal when I get to that section.}
-
-The spirit behind the @value{op-compare} option is to check whether the
-archive represents the current state of files on disk, more than validating
-the integrity of the archive media. For this later goal, @xref{verify}.
+The spirit behind the @option{--compare} (@option{--diff},
+@option{-d}) option is to check whether the archive represents the
+current state of files on disk, more than validating the integrity of
+the archive media. For this later goal, @xref{verify}.
@node create options
-@section Options Used by @code{--create}
+@section Options Used by @option{--create}
+@xopindex{create, additional options}
The previous chapter described the basics of how to use
-@value{op-create} to create an archive from a set of files.
+@option{--create} (@option{-c}) to create an archive from a set of files.
@xref{create}. This section described advanced options to be used with
-@samp{--create}.
+@option{--create}.
@menu
+* override:: Overriding File Metadata.
* Ignore Failed Read::
@end menu
+@node override
+@subsection Overriding File Metadata
+
+As described above, a @command{tar} archive keeps, for each member it contains,
+its @dfn{metadata}, such as modification time, mode and ownership of
+the file. @GNUTAR{} allows to replace these data with other values
+when adding files to the archive. The options described in this
+section affect creation of archives of any type. For POSIX archives,
+see also @ref{PAX keywords}, for additional ways of controlling
+metadata, stored in the archive.
+
+@table @option
+@opindex mode
+@item --mode=@var{permissions}
+
+When adding files to an archive, @command{tar} will use
+@var{permissions} for the archive members, rather than the permissions
+from the files. @var{permissions} can be specified either as an octal
+number or as symbolic permissions, like with
+@command{chmod} (@xref{File permissions, Permissions, File
+permissions, fileutils, @acronym{GNU} file utilities}. This reference
+also has useful information for those not being overly familiar with
+the UNIX permission system). Using latter syntax allows for
+more flexibility. For example, the value @samp{a+rw} adds read and write
+permissions for everybody, while retaining executable bits on directories
+or on any other file already marked as executable:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar --mode='a+rw' .}
+@end smallexample
+
+@item --mtime=@var{date}
+@opindex mtime
+
+When adding files to an archive, @command{tar} will use @var{date} as
+the modification time of members when creating archives, instead of
+their actual modification times. The argument @var{date} can be
+either a textual date representation in almost arbitrary format
+(@pxref{Date input formats}) or a name of the existing file, starting
+with @samp{/} or @samp{.}. In the latter case, the modification time
+of that file will be used.
+
+The following example will set the modification date to 00:00:00 UTC,
+January 1, 1970:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar --mtime='1970-01-01' .}
+@end smallexample
+
+@noindent
+When used with @option{--verbose} (@pxref{verbose tutorial}) @GNUTAR{}
+will try to convert the specified date back to its textual
+representation and compare it with the one given with
+@option{--mtime} options. If the two dates differ, @command{tar} will
+print a warning saying what date it will use. This is to help user
+ensure he is using the right date.
+
+For example:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar -v --mtime=yesterday .}
+tar: Option --mtime: Treating date `yesterday' as 2006-06-20
+13:06:29.152478
+@dots{}
+@end smallexample
+
+@item --owner=@var{user}
+@opindex owner
+
+Specifies that @command{tar} should use @var{user} as the owner of members
+when creating archives, instead of the user associated with the source
+file. The argument @var{user} can be either an existing user symbolic
+name, or a decimal numeric user ID.
+
+There is no value indicating a missing number, and @samp{0} usually means
+@code{root}. Some people like to force @samp{0} as the value to offer in
+their distributions for the owner of files, because the @code{root} user is
+anonymous anyway, so that might as well be the owner of anonymous
+archives. For example:
+
+@smallexample
+@group
+$ @kbd{tar -c -f archive.tar --owner=0 .}
+# @r{Or:}
+$ @kbd{tar -c -f archive.tar --owner=root .}
+@end group
+@end smallexample
+
+@item --group=@var{group}
+@opindex group
+
+Files added to the @command{tar} archive will have a group id of @var{group},
+rather than the group from the source file. The argument @var{group}
+can be either an existing group symbolic name, or a decimal numeric group ID.
+@end table
+
@node Ignore Failed Read
@subsection Ignore Fail Read
-@table @kbd
+@table @option
@item --ignore-failed-read
+@opindex ignore-failed-read
Do not exit with nonzero on unreadable files or directories.
@end table
@node extract options
-@section Options Used by @code{--extract}
+@section Options Used by @option{--extract}
@UNREVISED
-@FIXME{i need to get dan to go over these options with me and see if
-there's a better way of organizing them.}
-
-The previous chapter showed how to use @value{op-extract} to extract
-an archive into the filesystem. Various options cause @command{tar} to
+@xopindex{extract, additional options}
+The previous chapter showed how to use @option{--extract} to extract
+an archive into the file system. Various options cause @command{tar} to
extract more information than just file contents, such as the owner,
the permissions, the modification date, and so forth. This section
-presents options to be used with @samp{--extract} when certain special
+presents options to be used with @option{--extract} when certain special
considerations arise. You may review the information presented in
@ref{extract} for more basic information about the
-@samp{--extract} operation.
+@option{--extract} operation.
@menu
* Reading:: Options to Help Read Archives
@node Reading
@subsection Options to Help Read Archives
@cindex Options when reading archives
-@cindex Reading incomplete records
-@cindex Records, incomplete
-@cindex End-of-archive entries, ignoring
-@cindex Ignoring end-of-archive entries
-@cindex Large lists of file names on small machines
-@cindex Small memory
-@cindex Running out of space
@UNREVISED
+@cindex Reading incomplete records
+@cindex Records, incomplete
+@opindex read-full-records
Normally, @command{tar} will request data in full record increments from
an archive storage device. If the device cannot return a full record,
@command{tar} will report an error. However, some devices do not always
return full records, or do not require the last record of an archive to
be padded out to the next record boundary. To keep reading until you
obtain a full record, or to accept an incomplete record if it contains
-an end-of-archive marker, specify the @value{op-read-full-records} option
-in conjunction with the @value{op-extract} or @value{op-list} operations.
-@value{xref-read-full-records}.
+an end-of-archive marker, specify the @option{--read-full-records} (@option{-B}) option
+in conjunction with the @option{--extract} or @option{--list} operations.
+@xref{Blocking}.
-The @value{op-read-full-records} option is turned on by default when
+The @option{--read-full-records} (@option{-B}) option is turned on by default when
@command{tar} reads an archive from standard input, or from a remote
machine. This is because on BSD Unix systems, attempting to read a
pipe returns however much happens to be in the pipe, even if it is
would fail as soon as it read an incomplete record from the pipe.
If you're not sure of the blocking factor of an archive, you can
-read the archive by specifying @value{op-read-full-records} and
-@value{op-blocking-factor}, using a blocking factor larger than what the
-archive uses. This lets you avoid having to determine the blocking factor
-of an archive. @value{xref-blocking-factor}.
+read the archive by specifying @option{--read-full-records} (@option{-B}) and
+@option{--blocking-factor=@var{512-size}} (@option{-b
+@var{512-size}}), using a blocking factor larger than what the archive
+uses. This lets you avoid having to determine the blocking factor
+of an archive. @xref{Blocking Factor}.
@menu
* read full records::
@FIXME{need sentence or so of intro here}
-@table @kbd
+@table @option
+@opindex read-full-records
@item --read-full-records
@item -B
-Use in conjunction with @value{op-extract} to read an archive which
-contains incomplete records, or one which has a blocking factor less
-than the one specified.
+Use in conjunction with @option{--extract} (@option{--get},
+@option{-x}) to read an archive which contains incomplete records, or
+one which has a blocking factor less than the one specified.
@end table
@node Ignore Zeros
@unnumberedsubsubsec Ignoring Blocks of Zeros
+@cindex End-of-archive blocks, ignoring
+@cindex Ignoring end-of-archive blocks
+@opindex ignore-zeros
Normally, @command{tar} stops reading when it encounters a block of zeros
between file entries (which usually indicates the end of the archive).
-@value{op-ignore-zeros} allows @command{tar} to completely read an archive
-which contains a block of zeros before the end (i.e.@: a damaged
-archive, or one which was created by concatenating several archives
-together).
+@option{--ignore-zeros} (@option{-i}) allows @command{tar} to
+completely read an archive which contains a block of zeros before the
+end (i.e., a damaged archive, or one that was created by concatenating
+several archives together).
-The @value{op-ignore-zeros} option is turned off by default because many
+The @option{--ignore-zeros} (@option{-i}) option is turned off by default because many
versions of @command{tar} write garbage after the end-of-archive entry,
since that part of the media is never supposed to be read. @GNUTAR{}
does not write after the end of an archive, but seeks to
-maintain compatiblity among archiving utilities.
+maintain compatibility among archiving utilities.
-@table @kbd
+@table @option
@item --ignore-zeros
@itemx -i
-To ignore blocks of zeros (ie.@: end-of-archive entries) which may be
+To ignore blocks of zeros (i.e., end-of-archive entries) which may be
encountered while reading an archive. Use in conjunction with
-@value{op-extract} or @value{op-list}.
+@option{--extract} or @option{--list}.
@end table
@node Writing
@subsection Changing How @command{tar} Writes Files
-@cindex Overwriting old files, prevention
-@cindex Protecting old files
-@cindex Modification times of extracted files
-@cindex Permissions of extracted files
-@cindex Modes of extracted files
-@cindex Writing extracted files to standard output
-@cindex Standard output, writing extracted files to
@UNREVISED
-@FIXME{need to mention the brand new option, --backup}
+@FIXME{Introductory paragraph}
@menu
* Dealing with Old Files::
* Keep Newer Files::
* Unlink First::
* Recursive Unlink::
-* Modification Times::
+* Data Modification Times::
* Setting Access Permissions::
+* Directory Modification Times and Permissions::
* Writing to Standard Output::
+* Writing to an External Program::
* remove files::
@end menu
@node Dealing with Old Files
@unnumberedsubsubsec Options Controlling the Overwriting of Existing Files
+@xopindex{overwrite-dir, introduced}
When extracting files, if @command{tar} discovers that the extracted
file already exists, it normally replaces the file by removing it before
extracting it, to prevent confusion in the presence of hard or symbolic
default behavior. To be more cautious and preserve the metadata of
such a directory, use the @option{--no-overwrite-dir} option.
+@cindex Overwriting old files, prevention
+@xopindex{keep-old-files, introduced}
To be even more cautious and prevent existing files from being replaced, use
-the @value{op-keep-old-files} option. It causes @command{tar} to refuse
+the @option{--keep-old-files} (@option{-k}) option. It causes @command{tar} to refuse
to replace or update a file that already exists, i.e., a file with the
same name as an archive member prevents extraction of that archive
member. Instead, it reports an error.
+@xopindex{overwrite, introduced}
To be more aggressive about altering existing files, use the
-@value{op-overwrite} option. It causes @command{tar} to overwrite
+@option{--overwrite} option. It causes @command{tar} to overwrite
existing files and to follow existing symbolic links when extracting.
+@cindex Protecting old files
Some people argue that @GNUTAR{} should not hesitate
to overwrite files with other files when extracting. When extracting
a @command{tar} archive, they expect to see a faithful copy of the
-state of the filesystem when the archive was created. It is debatable
+state of the file system when the archive was created. It is debatable
that this would always be a proper behavior. For example, suppose one
has an archive in which @file{usr/local} is a link to
@file{usr/local2}. Since then, maybe the site removed the link and
not be welcome at all that @GNUTAR{} removes the
whole hierarchy just to make room for the link to be reinstated
(unless it @emph{also} simultaneously restores the full
-@file{/usr/local2}, of course! @GNUTAR{} is indeed
+@file{/usr/local2}, of course!) @GNUTAR{} is indeed
able to remove a whole hierarchy to reestablish a symbolic link, for
-example, but @emph{only if} @value{op-recursive-unlink} is specified
+example, but @emph{only if} @option{--recursive-unlink} is specified
to allow this behavior. In any case, single files are silently
removed.
-Finally, the @value{op-unlink-first} option can improve performance in
+@xopindex{unlink-first, introduced}
+Finally, the @option{--unlink-first} (@option{-U}) option can improve performance in
some cases by causing @command{tar} to remove files unconditionally
before extracting them.
@node Overwrite Old Files
@unnumberedsubsubsec Overwrite Old Files
-@table @kbd
+@table @option
+@opindex overwrite
@item --overwrite
Overwrite existing files and directory metadata when extracting files
from an archive.
-This
-causes @command{tar} to write extracted files into the file system without
+This causes @command{tar} to write extracted files into the file system without
regard to the files already on the system; i.e., files with the same
names as archive members are overwritten when the archive is extracted.
It also causes @command{tar} to extract the ownership, permissions,
empty directories and even symbolic links are automatically removed if
they are in the way of extraction.
-Be careful when using the @value{op-overwrite} option, particularly when
-combined with the @value{op-absolute-names} option, as this combination
+Be careful when using the @option{--overwrite} option, particularly when
+combined with the @option{--absolute-names} (@option{-P}) option, as this combination
can change the contents, ownership or permissions of any file on your
system. Also, many systems do not take kindly to overwriting files that
are currently being executed.
+@opindex overwrite-dir
@item --overwrite-dir
Overwrite the metadata of directories when extracting files from an
archive, but remove other files before extracting.
@node Keep Old Files
@unnumberedsubsubsec Keep Old Files
-@table @kbd
+@table @option
+@opindex keep-old-files
@item --keep-old-files
@itemx -k
Do not replace existing files from archive. The
-@value{op-keep-old-files} option prevents @command{tar} from replacing
-existing files with files with the same name from the archive.
-The @value{op-keep-old-files} option is meaningless with @value{op-list}.
-Prevents @command{tar} from replacing files in the file system during
-extraction.
+@option{--keep-old-files} (@option{-k}) option prevents @command{tar}
+from replacing existing files with files with the same name from the
+archive. The @option{--keep-old-files} option is meaningless with
+@option{--list} (@option{-t}). Prevents @command{tar} from replacing
+files in the file system during extraction.
@end table
@node Keep Newer Files
@unnumberedsubsubsec Keep Newer Files
-@table @kbd
+@table @option
+@opindex keep-newer-files
@item --keep-newer-files
Do not replace existing files that are newer than their archive
-copies. This option is meaningless with @value{op-list}.
+copies. This option is meaningless with @option{--list} (@option{-t}).
@end table
@node Unlink First
@unnumberedsubsubsec Unlink First
-@table @kbd
+@table @option
+@opindex unlink-first
@item --unlink-first
@itemx -U
Remove files before extracting over them.
@node Recursive Unlink
@unnumberedsubsubsec Recursive Unlink
-@table @kbd
+@table @option
+@opindex recursive-unlink
@item --recursive-unlink
When this option is specified, try removing files and directory hierarchies
before extracting over them. @emph{This is a dangerous option!}
@end table
-If you specify the @value{op-recursive-unlink} option,
+If you specify the @option{--recursive-unlink} option,
@command{tar} removes @emph{anything} that keeps you from extracting a file
as far as current permissions will allow it. This could include removal
of the contents of a full directory hierarchy.
-@node Modification Times
-@unnumberedsubsubsec Setting Modification Times
+@node Data Modification Times
+@unnumberedsubsubsec Setting Data Modification Times
-Normally, @command{tar} sets the modification times of extracted files to
-the modification times recorded for the files in the archive, but
+@cindex Data modification times of extracted files
+@cindex Modification times of extracted files
+Normally, @command{tar} sets the data modification times of extracted
+files to the corresponding times recorded for the files in the archive, but
limits the permissions of extracted files by the current @code{umask}
setting.
-To set the modification times of extracted files to the time when
-the files were extracted, use the @value{op-touch} option in
-conjunction with @value{op-extract}.
+To set the data modification times of extracted files to the time when
+the files were extracted, use the @option{--touch} (@option{-m}) option in
+conjunction with @option{--extract} (@option{--get}, @option{-x}).
-@table @kbd
+@table @option
+@opindex touch
@item --touch
@itemx -m
-Sets the modification time of extracted archive members to the time
+Sets the data modification time of extracted archive members to the time
they were extracted, not the time recorded for them in the archive.
-Use in conjunction with @value{op-extract}.
+Use in conjunction with @option{--extract} (@option{--get}, @option{-x}).
@end table
@node Setting Access Permissions
@unnumberedsubsubsec Setting Access Permissions
+@cindex Permissions of extracted files
+@cindex Modes of extracted files
To set the modes (access permissions) of extracted files to those
-recorded for those files in the archive, use @samp{--same-permissions}
-in conjunction with the @value{op-extract} operation. @FIXME{Should be
-aliased to ignore-umask.}
+recorded for those files in the archive, use @option{--same-permissions}
+in conjunction with the @option{--extract} (@option{--get},
+@option{-x}) operation.
-@table @kbd
-@item --preserve-permission
-@itemx --same-permission
-@itemx --ignore-umask
+@table @option
+@opindex preserve-permissions
+@opindex same-permissions
+@item --preserve-permissions
+@itemx --same-permissions
+@c @itemx --ignore-umask
@itemx -p
Set modes of extracted archive members to those recorded in the
archive, instead of current umask settings. Use in conjunction with
-@value{op-extract}.
+@option{--extract} (@option{--get}, @option{-x}).
@end table
-@FIXME{Following paragraph needs to be rewritten: why doesn't this cat
-files together, why is this useful. is it really useful with
-more than one file?}
+@node Directory Modification Times and Permissions
+@unnumberedsubsubsec Directory Modification Times and Permissions
+
+After successfully extracting a file member, @GNUTAR{} normally
+restores its permissions and modification times, as described in the
+previous sections. This cannot be done for directories, because
+after extracting a directory @command{tar} will almost certainly
+extract files into that directory and this will cause the directory
+modification time to be updated. Moreover, restoring that directory
+permissions may not permit file creation within it. Thus, restoring
+directory permissions and modification times must be delayed at least
+until all files have been extracted into that directory. @GNUTAR{}
+restores directories using the following approach.
+
+The extracted directories are created with the mode specified in the
+archive, as modified by the umask of the user, which gives sufficient
+permissions to allow file creation. The meta-information about the
+directory is recorded in the temporary list of directories. When
+preparing to extract next archive member, @GNUTAR{} checks if the
+directory prefix of this file contains the remembered directory. If
+it does not, the program assumes that all files have been extracted
+into that directory, restores its modification time and permissions
+and removes its entry from the internal list. This approach allows
+to correctly restore directory meta-information in the majority of
+cases, while keeping memory requirements sufficiently small. It is
+based on the fact, that most @command{tar} archives use the predefined
+order of members: first the directory, then all the files and
+subdirectories in that directory.
+
+However, this is not always true. The most important exception are
+incremental archives (@pxref{Incremental Dumps}). The member order in
+an incremental archive is reversed: first all directory members are
+stored, followed by other (non-directory) members. So, when extracting
+from incremental archives, @GNUTAR{} alters the above procedure. It
+remembers all restored directories, and restores their meta-data
+only after the entire archive has been processed. Notice, that you do
+not need to specify any special options for that, as @GNUTAR{}
+automatically detects archives in incremental format.
+
+There may be cases, when such processing is required for normal archives
+too. Consider the following example:
+
+@smallexample
+@group
+$ @kbd{tar --no-recursion -cvf archive \
+ foo foo/file1 bar bar/file foo/file2}
+foo/
+foo/file1
+bar/
+bar/file
+foo/file2
+@end group
+@end smallexample
+
+During the normal operation, after encountering @file{bar}
+@GNUTAR{} will assume that all files from the directory @file{foo}
+were already extracted and will therefore restore its timestamp and
+permission bits. However, after extracting @file{foo/file2} the
+directory timestamp will be offset again.
+
+To correctly restore directory meta-information in such cases, use
+@option{delay-directory-restore} command line option:
+
+@table @option
+@opindex delay-directory-restore
+@item --delay-directory-restore
+Delays restoring of the modification times and permissions of extracted
+directories until the end of extraction. This way, correct
+meta-information is restored even if the archive has unusual member
+ordering.
+
+@opindex no-delay-directory-restore
+@item --no-delay-directory-restore
+Cancel the effect of the previous @option{--delay-directory-restore}.
+Use this option if you have used @option{--delay-directory-restore} in
+@env{TAR_OPTIONS} variable (@pxref{TAR_OPTIONS}) and wish to
+temporarily disable it.
+@end table
@node Writing to Standard Output
@unnumberedsubsubsec Writing to Standard Output
+@cindex Writing extracted files to standard output
+@cindex Standard output, writing extracted files to
To write the extracted files to the standard output, instead of
-creating the files on the file system, use @value{op-to-stdout} in
-conjunction with @value{op-extract}. This option is useful if you are
+creating the files on the file system, use @option{--to-stdout} (@option{-O}) in
+conjunction with @option{--extract} (@option{--get}, @option{-x}). This option is useful if you are
extracting files to send them through a pipe, and do not need to
preserve them in the file system. If you extract multiple members,
they appear on standard output concatenated, in the order they are
found in the archive.
-@table @kbd
+@table @option
+@opindex to-stdout
@item --to-stdout
@itemx -O
-Writes files to the standard output. Used in conjunction with
-@value{op-extract}. Extract files to standard output. When this option
-is used, instead of creating the files specified, @command{tar} writes
+Writes files to the standard output. Use only in conjunction with
+@option{--extract} (@option{--get}, @option{-x}). When this option is
+used, instead of creating the files specified, @command{tar} writes
the contents of the files extracted to its standard output. This may
be useful if you are only extracting the files in order to send them
-through a pipe. This option is meaningless with @value{op-list}.
+through a pipe. This option is meaningless with @option{--list}
+(@option{-t}).
@end table
This can be useful, for example, if you have a tar archive containing
tar -xOzf foo.tgz bigfile1 bigfile2 | process
@end smallexample
-@node remove files
-@unnumberedsubsubsec Removing Files
+However, @option{--to-command} may be more convenient for use with
+multiple files. See the next section.
-@FIXME{the various macros in the front of the manual think that this
-option goes in this section. i have no idea; i only know it's nowhere
-else in the book...}
+@node Writing to an External Program
+@unnumberedsubsubsec Writing to an External Program
-@table @kbd
-@item --remove-files
-Remove files after adding them to the archive.
+You can instruct @command{tar} to send the contents of each extracted
+file to the standard input of an external program:
+
+@table @option
+@opindex to-command
+@item --to-command=@var{command}
+Extract files and pipe their contents to the standard input of
+@var{command}. When this option is used, instead of creating the
+files specified, @command{tar} invokes @var{command} and pipes the
+contents of the files to its standard output. @var{Command} may
+contain command line arguments. The program is executed via
+@code{sh -c}. Notice, that @var{command} is executed once for each regular file
+extracted. Non-regular files (directories, etc.) are ignored when this
+option is used.
@end table
-@node Scarce
-@subsection Coping with Scarce Resources
-@cindex Middle of the archive, starting in the
-@cindex Running out of space during extraction
-@cindex Disk space, running out of
-@cindex Space on the disk, recovering from lack of
-@UNREVISED
+The command can obtain the information about the file it processes
+from the following environment variables:
-@menu
-* Starting File::
-* Same Order::
+@table @var
+@vrindex TAR_FILETYPE, to-command environment
+@item TAR_FILETYPE
+Type of the file. It is a single letter with the following meaning:
+
+@multitable @columnfractions 0.10 0.90
+@item f @tab Regular file
+@item d @tab Directory
+@item l @tab Symbolic link
+@item h @tab Hard link
+@item b @tab Block device
+@item c @tab Character device
+@end multitable
+
+Currently only regular files are supported.
+
+@vrindex TAR_MODE, to-command environment
+@item TAR_MODE
+File mode, an octal number.
+
+@vrindex TAR_FILENAME, to-command environment
+@item TAR_FILENAME
+The name of the file.
+
+@vrindex TAR_REALNAME, to-command environment
+@item TAR_REALNAME
+Name of the file as stored in the archive.
+
+@vrindex TAR_UNAME, to-command environment
+@item TAR_UNAME
+Name of the file owner.
+
+@vrindex TAR_GNAME, to-command environment
+@item TAR_GNAME
+Name of the file owner group.
+
+@vrindex TAR_ATIME, to-command environment
+@item TAR_ATIME
+Time of last access. It is a decimal number, representing seconds
+since the epoch. If the archive provides times with nanosecond
+precision, the nanoseconds are appended to the timestamp after a
+decimal point.
+
+@vrindex TAR_MTIME, to-command environment
+@item TAR_MTIME
+Time of last modification.
+
+@vrindex TAR_CTIME, to-command environment
+@item TAR_CTIME
+Time of last status change.
+
+@vrindex TAR_SIZE, to-command environment
+@item TAR_SIZE
+Size of the file.
+
+@vrindex TAR_UID, to-command environment
+@item TAR_UID
+UID of the file owner.
+
+@vrindex TAR_GID, to-command environment
+@item TAR_GID
+GID of the file owner.
+@end table
+
+In addition to these variables, @env{TAR_VERSION} contains the
+@GNUTAR{} version number.
+
+If @var{command} exits with a non-0 status, @command{tar} will print
+an error message similar to the following:
+
+@smallexample
+tar: 2345: Child returned status 1
+@end smallexample
+
+Here, @samp{2345} is the PID of the finished process.
+
+If this behavior is not wanted, use @option{--ignore-command-error}:
+
+@table @option
+@opindex ignore-command-error
+@item --ignore-command-error
+Ignore exit codes of subprocesses. Notice that if the program
+exits on signal or otherwise terminates abnormally, the error message
+will be printed even if this option is used.
+
+@opindex no-ignore-command-error
+@item --no-ignore-command-error
+Cancel the effect of any previous @option{--ignore-command-error}
+option. This option is useful if you have set
+@option{--ignore-command-error} in @env{TAR_OPTIONS}
+(@pxref{TAR_OPTIONS}) and wish to temporarily cancel it.
+@end table
+
+@node remove files
+@unnumberedsubsubsec Removing Files
+
+@FIXME{The section is too terse. Something more to add? An example,
+maybe?}
+
+@table @option
+@opindex remove-files
+@item --remove-files
+Remove files after adding them to the archive.
+@end table
+
+@node Scarce
+@subsection Coping with Scarce Resources
+@UNREVISED
+
+@cindex Small memory
+@cindex Running out of space
+
+@menu
+* Starting File::
+* Same Order::
@end menu
@node Starting File
@unnumberedsubsubsec Starting File
-@table @kbd
+@table @option
+@opindex starting-file
@item --starting-file=@var{name}
@itemx -K @var{name}
Starts an operation in the middle of an archive. Use in conjunction
-with @value{op-extract} or @value{op-list}.
+with @option{--extract} (@option{--get}, @option{-x}) or @option{--list} (@option{-t}).
@end table
+@cindex Middle of the archive, starting in the
If a previous attempt to extract files failed due to lack of disk
-space, you can use @value{op-starting-file} to start extracting only
-after member @var{name} of the archive. This assumes, of course, that
-there is now free space, or that you are now extracting into a
-different file system. (You could also choose to suspend @command{tar},
-remove unnecessary files from the file system, and then restart the
-same @command{tar} operation. In this case, @value{op-starting-file} is
-not necessary. @value{xref-incremental}, @value{xref-interactive},
-and @value{ref-exclude}.)
+space, you can use @option{--starting-file=@var{name}} (@option{-K
+@var{name}}) to start extracting only after member @var{name} of the
+archive. This assumes, of course, that there is now free space, or
+that you are now extracting into a different file system. (You could
+also choose to suspend @command{tar}, remove unnecessary files from
+the file system, and then restart the same @command{tar} operation.
+In this case, @option{--starting-file} is not necessary.
+@xref{Incremental Dumps}, @xref{interactive}, and @ref{exclude}.)
@node Same Order
@unnumberedsubsubsec Same Order
-@table @kbd
+@table @option
+@cindex Large lists of file names on small machines
+@opindex same-order
+@opindex preserve-order
@item --same-order
@itemx --preserve-order
@itemx -s
To process large lists of file names on machines with small amounts of
-memory. Use in conjunction with @value{op-compare},
-@value{op-list}
-or @value{op-extract}.
+memory. Use in conjunction with @option{--compare} (@option{--diff},
+@option{-d}), @option{--list} (@option{-t}) or @option{--extract}
+(@option{--get}, @option{-x}).
@end table
-@FIXME{we don't need/want --preserve to exist any more (from melissa:
-ie, don't want that *version* of the option to exist, or don't want
-the option to exist in either version?}
-
-@FIXME{i think this explanation is lacking.}
-
-The @value{op-same-order} option tells @command{tar} that the list of file
+The @option{--same-order} (@option{--preserve-order}, @option{-s}) option tells @command{tar} that the list of file
names to be listed or extracted is sorted in the same order as the
files in the archive. This allows a large list of names to be used,
even on a small machine that would not otherwise be able to hold all
file are kept.
@table @samp
-
@item --backup[=@var{method}]
-@opindex --backup
+@opindex backup
@vindex VERSION_CONTROL
@cindex backups
Back up files that are about to be overwritten or removed.
@table @samp
@item t
@itemx numbered
-@opindex numbered @r{backup method}
+@cindex numbered @r{backup method}
Always make numbered backups.
@item nil
@itemx existing
-@opindex existing @r{backup method}
+@cindex existing @r{backup method}
Make numbered backups of files that already have them, simple backups
of the others.
@item never
@itemx simple
-@opindex simple @r{backup method}
+@cindex simple @r{backup method}
Always make simple backups.
@end table
@item --suffix=@var{suffix}
-@opindex --suffix
+@opindex suffix
@cindex backup suffix
@vindex SIMPLE_BACKUP_SUFFIX
-Append @var{suffix} to each backup file made with @samp{--backup}. If this
+Append @var{suffix} to each backup file made with @option{--backup}. If this
option is not specified, the value of the @env{SIMPLE_BACKUP_SUFFIX}
environment variable is used. And if @env{SIMPLE_BACKUP_SUFFIX} is not
set, the default is @samp{~}, just as in Emacs.
@end table
-Some people express the desire to @emph{always} use the @value{op-backup}
-option, by defining some kind of alias or script. This is not as easy
-as one may think, due to the fact that old style options should appear first
-and consume arguments a bit unpredictably for an alias or script. But,
-if you are ready to give up using old style options, you may resort to
-using something like (a Bourne shell function here):
-
-@smallexample
-tar () @{ /usr/local/bin/tar --backup $*; @}
-@end smallexample
-
@node Applications
@section Notable @command{tar} Usages
@UNREVISED
medium is a @dfn{pipe}, which is one a Unix redirection mechanism:
@smallexample
-$ @kbd{cd sourcedir; tar -cf - . | (cd targetdir; tar -xf -)}
+$ @kbd{(cd sourcedir; tar -cf - .) | (cd targetdir; tar -xf -)}
+@end smallexample
+
+@noindent
+You can avoid subshells by using @option{-C} option:
+
+@smallexample
+$ @kbd{tar -C sourcedir -cf - . | tar -C targetdir -xf -}
@end smallexample
@noindent
The command also works using short option forms:
@smallexample
-$ @w{@kbd{cd sourcedir; tar --create --file=- . | (cd targetdir; tar --extract --file=-)}}
+$ @kbd{(cd sourcedir; tar --create --file=- . ) \
+ | (cd targetdir; tar --extract --file=-)}
+# Or:
+$ @kbd{tar --directory sourcedir --create --file=- . ) \
+ | tar --directory targetdir --extract --file=-}
@end smallexample
@noindent
If there are too many files to conveniently list on the command line,
you can list the names in a file, and @command{tar} will read that file.
-@value{xref-files-from}.
+@xref{files}.
There are various ways of causing @command{tar} to skip over some files,
and not archive them. @xref{Choosing}.
ftp://ftp.cs.umd.edu/pub/amanda
@end smallexample
-@ifclear PUBLISH
+@FIXME{
Here is a possible plan for a future documentation about the backuping
scripts which are provided within the @GNUTAR{}
distribution.
-@smallexample
-.* dumps
-. + what are dumps
-
-. + different levels of dumps
-. - full dump = dump everything
-. - level 1, level 2 dumps etc, -
- A level n dump dumps everything changed since the last level
- n-1 dump (?)
-
-. + how to use scripts for dumps (ie, the concept)
-. - scripts to run after editing backup specs (details)
-
-. + Backup Specs, what is it.
-. - how to customize
-. - actual text of script [/sp/dump/backup-specs]
-
-. + Problems
-. - rsh doesn't work
-. - rtape isn't installed
-. - (others?)
-
-. + the --incremental option of tar
-
-. + tapes
-. - write protection
-. - types of media
-. : different sizes and types, useful for different things
-. - files and tape marks
+@itemize @bullet
+@item dumps
+ @itemize @minus
+ @item what are dumps
+ @item different levels of dumps
+ @itemize +
+ @item full dump = dump everything
+ @item level 1, level 2 dumps etc
+ A level @var{n} dump dumps everything changed since the last level
+ @var{n}-1 dump (?)
+ @end itemize
+ @item how to use scripts for dumps (ie, the concept)
+ @itemize +
+ @item scripts to run after editing backup specs (details)
+ @end itemize
+ @item Backup Specs, what is it.
+ @itemize +
+ @item how to customize
+ @item actual text of script [/sp/dump/backup-specs]
+ @end itemize
+ @item Problems
+ @itemize +
+ @item rsh doesn't work
+ @item rtape isn't installed
+ @item (others?)
+ @end itemize
+ @item the @option{--incremental} option of tar
+ @item tapes
+ @itemize +
+ @item write protection
+ @item types of media, different sizes and types, useful for different things
+ @item files and tape marks
one tape mark between files, two at end.
-. - positioning the tape
+ @item positioning the tape
MT writes two at end of write,
- backspaces over one when writing again.
-@end smallexample
-
-@end ifclear
+ backspaces over one when writing again.
+ @end itemize
+ @end itemize
+@end itemize
+}
-This chapter documents both the provided FSF scripts and @command{tar}
+This chapter documents both the provided shell scripts and @command{tar}
options which are more specific to usage as a backup tool.
To @dfn{back up} a file system means to create archives that contain
@menu
* Full Dumps:: Using @command{tar} to Perform Full Dumps
-* Inc Dumps:: Using @command{tar} to Perform Incremental Dumps
-* incremental and listed-incremental:: The Incremental Options
+* Incremental Dumps:: Using @command{tar} to Perform Incremental Dumps
* Backup Levels:: Levels of Backups
* Backup Parameters:: Setting Parameters for Backups and Restoration
* Scripted Backups:: Using the Backup Scripts
@cindex corrupted archives
Full dumps should only be made when no other people or programs
-are modifying files in the filesystem. If files are modified while
+are modifying files in the file system. If files are modified while
@command{tar} is making the backup, they may not be stored properly in
the archive, in which case you won't be able to restore them if you
have to. (Files not being modified are written with no trouble, and do
not corrupt the entire archive.)
-You will want to use the @value{op-label} option to give the archive a
+You will want to use the @option{--label=@var{archive-label}}
+(@option{-V @var{archive-label}}) option to give the archive a
volume label, so you can tell what this archive is even if the label
falls off the tape, or anything like that.
-Unless the filesystem you are dumping is guaranteed to fit on
-one volume, you will need to use the @value{op-multi-volume} option.
+Unless the file system you are dumping is guaranteed to fit on
+one volume, you will need to use the @option{--multi-volume} (@option{-M}) option.
Make sure you have enough tapes on hand to complete the backup.
-If you want to dump each filesystem separately you will need to use
-the @value{op-one-file-system} option to prevent @command{tar} from crossing
-filesystem boundaries when storing (sub)directories.
+If you want to dump each file system separately you will need to use
+the @option{--one-file-system} option to prevent
+@command{tar} from crossing file system boundaries when storing
+(sub)directories.
-The @value{op-incremental} option is not needed, since this is a complete
-copy of everything in the filesystem, and a full restore from this
-backup would only be done onto a completely empty disk.
+The @option{--incremental} (@option{-G}) (@pxref{Incremental Dumps})
+option is not needed, since this is a complete copy of everything in
+the file system, and a full restore from this backup would only be
+done onto a completely
+empty disk.
Unless you are in a hurry, and trust the @command{tar} program (and your
-tapes), it is a good idea to use the @value{op-verify} option, to make
-sure your files really made it onto the dump properly. This will
-also detect cases where the file was modified while (or just after)
-it was being archived. Not all media (notably cartridge tapes) are
-capable of being verified, unfortunately.
-
-@value{op-listed-incremental} take a file name argument always. If the
-file doesn't exist, run a level zero dump, creating the file. If the
-file exists, uses that file to see what has changed.
-
-@value{op-incremental} @FIXME{look it up}
-
-@value{op-incremental} handle old @acronym{GNU}-format incremental backup.
-
-This option should only be used when creating an incremental backup of
-a filesystem. When the @value{op-incremental} option is used, @command{tar}
-writes, at the beginning of the archive, an entry for each of the
-directories that will be operated on. The entry for a directory
-includes a list of all the files in the directory at the time the
-dump was done, and a flag for each file indicating whether the file
-is going to be put in the archive. This information is used when
-doing a complete incremental restore.
-
-Note that this option causes @command{tar} to create a non-standard
-archive that may not be readable by non-@acronym{GNU} versions of the
-@command{tar} program.
-
-The @value{op-incremental} option means the archive is an incremental
-backup. Its meaning depends on the command that it modifies.
-
-If the @value{op-incremental} option is used with @value{op-list},
-@command{tar} will list, for each directory in the archive, the list
-of files in that directory at the time the archive was created. This
-information is put out in a format that is not easy for humans to
-read, but which is unambiguous for a program: each file name is
-preceded by either a @samp{Y} if the file is present in the archive,
-an @samp{N} if the file is not included in the archive, or a @samp{D}
-if the file is a directory (and is included in the archive). Each
-file name is terminated by a null character. The last file is
-followed by an additional null and a newline to indicate the end of
-the data.
-
-If the @value{op-incremental} option is used with @value{op-extract}, then
-when the entry for a directory is found, all files that currently
-exist in that directory but are not listed in the archive @emph{are
-deleted from the directory}.
-
-This behavior is convenient when you are restoring a damaged file
-system from a succession of incremental backups: it restores the
-entire state of the file system to that which obtained when the backup
-was made. If you don't use @value{op-incremental}, the file system will
-probably fill up with files that shouldn't exist any more.
-
-@value{op-listed-incremental} handle new @acronym{GNU}-format
-incremental backup. This option handles new @acronym{GNU}-format
-incremental backup. It has much the same effect as
-@value{op-incremental}, but also the time when the dump is done and
-the list of directories dumped is written to the given
-@var{file}. When restoring, only files newer than the saved time are
-restored, and the directory list is used to speed up operations.
-
-@value{op-listed-incremental} acts like @value{op-incremental}, but when
-used in conjunction with @value{op-create} will also cause @command{tar} to
-use the file @var{file}, which contains information about the state
-of the filesystem at the time of the last backup, to decide which
-files to include in the archive being created. That file will then
-be updated by @command{tar}. If the file @var{file} does not exist when
-this option is specified, @command{tar} will create it, and include all
-appropriate files in the archive.
-
-The file, which is archive independent, contains the date it was last
-modified and a list of devices, inode numbers and directory names.
-@command{tar} will archive files with newer mod dates or inode change
-times, and directories with an unchanged inode number and device but
-a changed directory name. The file is updated after the files to
-be archived are determined, but before the new archive is actually
-created.
-
-@node Inc Dumps
+tapes), it is a good idea to use the @option{--verify} (@option{-W})
+option, to make sure your files really made it onto the dump properly.
+This will also detect cases where the file was modified while (or just
+after) it was being archived. Not all media (notably cartridge tapes)
+are capable of being verified, unfortunately.
+
+@node Incremental Dumps
@section Using @command{tar} to Perform Incremental Dumps
-@UNREVISED
-@cindex incremental dumps
-@cindex dumps, incremental
+@dfn{Incremental backup} is a special form of @GNUTAR{} archive that
+stores additional metadata so that exact state of the file system
+can be restored when extracting the archive.
+
+@GNUTAR{} currently offers two options for handling incremental
+backups: @option{--listed-incremental=@var{snapshot-file}} (@option{-g
+@var{snapshot-file}}) and @option{--incremental} (@option{-G}).
-Performing incremental dumps is similar to performing full dumps,
-although a few more options will usually be needed.
+@opindex listed-incremental
+The option @option{--listed-incremental} instructs tar to operate on
+an incremental archive with additional metadata stored in a standalone
+file, called a @dfn{snapshot file}. The purpose of this file is to help
+determine which files have been changed, added or deleted since the
+last backup, so that the next incremental backup will contain only
+modified files. The name of the snapshot file is given as an argument
+to the option:
-A standard scheme is to do a @emph{monthly} (full) dump once a month,
-a @emph{weekly} dump once a week of everything since the last monthly
-and a @emph{daily} every day of everything since the last (weekly or
-monthly) dump.
+@table @option
+@item --listed-incremental=@var{file}
+@itemx -g @var{file}
+ Handle incremental backups with snapshot data in @var{file}.
+@end table
-Here is a sample script to dump the directory hierarchies @samp{/usr}
-and @samp{/var}.
+To create an incremental backup, you would use
+@option{--listed-incremental} together with @option{--create}
+(@pxref{create}). For example:
@smallexample
-#! /bin/sh
-tar --create \
- --blocking-factor=126 \
- --file=/dev/rmt/0 \
- --label="`hostname` /usr /var `date +%Y-%m-%d`" \
- --listed-incremental=/var/log/usr-var.snar \
- --verbose \
- /usr /var
+$ @kbd{tar --create \
+ --file=archive.1.tar \
+ --listed-incremental=/var/log/usr.snar \
+ /usr}
@end smallexample
-This script uses the file @file{/var/log/usr-var.snar} as a snapshot to
-store information about the previous tar dump.
+This will create in @file{archive.1.tar} an incremental backup of
+the @file{/usr} file system, storing additional metadata in the file
+@file{/var/log/usr.snar}. If this file does not exist, it will be
+created. The created archive will then be a @dfn{level 0 backup};
+please see the next section for more on backup levels.
-The blocking factor 126 is an attempt to make the tape drive stream.
-Some tape devices cannot handle 64 kB blocks or larger, and require the
-block size to be a multiple of 1 kB; for these devices, 126 is the
-largest blocking factor that can be used.
+Otherwise, if the file @file{/var/log/usr.snar} exists, it
+determines which files are modified. In this case only these files will be
+stored in the archive. Suppose, for example, that after running the
+above command, you delete file @file{/usr/doc/old} and create
+directory @file{/usr/local/db} with the following contents:
-@node incremental and listed-incremental
-@section The Incremental Options
-@UNREVISED
+@smallexample
+$ @kbd{ls /usr/local/db}
+/usr/local/db/data
+/usr/local/db/index
+@end smallexample
+
+Some time later you create another incremental backup. You will
+then see:
+
+@smallexample
+$ @kbd{tar --create \
+ --file=archive.2.tar \
+ --listed-incremental=/var/log/usr.snar \
+ /usr}
+tar: usr/local/db: Directory is new
+usr/local/db/
+usr/local/db/data
+usr/local/db/index
+@end smallexample
+
+@noindent
+The created archive @file{archive.2.tar} will contain only these
+three members. This archive is called a @dfn{level 1 backup}. Notice
+that @file{/var/log/usr.snar} will be updated with the new data, so if
+you plan to create more @samp{level 1} backups, it is necessary to
+create a working copy of the snapshot file before running
+@command{tar}. The above example will then be modified as follows:
-@value{op-incremental} is used in conjunction with @value{op-create},
-@value{op-extract} or @value{op-list} when backing up and restoring file
-systems. An archive cannot be extracted or listed with the
-@value{op-incremental} option specified unless it was created with the
-option specified. This option should only be used by a script, not by
-the user, and is usually disregarded in favor of
-@value{op-listed-incremental}, which is described below.
-
-@value{op-incremental} in conjunction with @value{op-create} causes
-@command{tar} to write, at the beginning of the archive, an entry for
-each of the directories that will be archived. The entry for a
-directory includes a list of all the files in the directory at the
-time the archive was created and a flag for each file indicating
-whether or not the file is going to be put in the archive.
-
-Note that this option causes @command{tar} to create a non-standard
-archive that may not be readable by non-@acronym{GNU} versions of the
-@command{tar} program.
-
-@value{op-incremental} in conjunction with @value{op-extract} causes
-@command{tar} to read the lists of directory contents previously stored
-in the archive, @emph{delete} files in the file system that did not
-exist in their directories when the archive was created, and then
-extract the files in the archive.
-
-This behavior is convenient when restoring a damaged file system from
-a succession of incremental backups: it restores the entire state of
-the file system to that which obtained when the backup was made. If
-@value{op-incremental} isn't specified, the file system will probably
-fill up with files that shouldn't exist any more.
-
-@value{op-incremental} in conjunction with @value{op-list} causes
-@command{tar} to print, for each directory in the archive, the list of
-files in that directory at the time the archive was created. This
-information is put out in a format that is not easy for humans to
-read, but which is unambiguous for a program: each file name is
-preceded by either a @samp{Y} if the file is present in the archive,
-an @samp{N} if the file is not included in the archive, or a @samp{D}
-if the file is a directory (and is included in the archive). Each
-file name is terminated by a null character. The last file is followed
-by an additional null and a newline to indicate the end of the data.
-
-@value{op-listed-incremental} acts like @value{op-incremental}, but when
-used in conjunction with @value{op-create} will also cause @command{tar}
-to use the file @var{snapshot-file}, which contains information about
-the state of the file system at the time of the last backup, to decide
-which files to include in the archive being created. That file will
-then be updated by @command{tar}. If the file @var{file} does not exist
-when this option is specified, @command{tar} will create it, and include
-all appropriate files in the archive.
-
-The file @var{file}, which is archive independent, contains the date
-it was last modified and a list of devices, inode numbers and
-directory names. @command{tar} will archive files with newer mod dates
-or inode change times, and directories with an unchanged inode number
-and device but a changed directory name. The file is updated after
-the files to be archived are determined, but before the new archive is
-actually created.
+@smallexample
+$ @kbd{cp /var/log/usr.snar /var/log/usr.snar-1}
+$ @kbd{tar --create \
+ --file=archive.2.tar \
+ --listed-incremental=/var/log/usr.snar-1 \
+ /usr}
+@end smallexample
Incremental dumps depend crucially on time stamps, so the results are
-unreliable if you modify a file's time stamps during dumping (e.g.@:
-with the @samp{--atime-preserve} option), or if you set the clock
+unreliable if you modify a file's time stamps during dumping (e.g.,
+with the @option{--atime-preserve=replace} option), or if you set the clock
backwards.
-Despite it should be obvious that a device has a non-volatile value, NFS
-devices have non-dependable values when an automounter gets in the picture.
-This led to a great deal of spurious redumping in incremental dumps,
-so it is somewhat useless to compare two NFS devices numbers over time.
-So @command{tar} now considers all NFS devices as being equal when it comes
-to comparing directories; this is fairly gross, but there does not seem
+Metadata stored in snapshot files include device numbers, which,
+obviously is supposed to be a non-volatile value. However, it turns
+out that NFS devices have undependable values when an automounter
+gets in the picture. This can lead to a great deal of spurious
+redumping in incremental dumps, so it is somewhat useless to compare
+two NFS devices numbers over time. The solution implemented currently
+is to considers all NFS devices as being equal when it comes to
+comparing directories; this is fairly gross, but there does not seem
to be a better way to go.
-@command{tar} doesn't access @var{snapshot-file} when
-@value{op-create} or @value{op-list} are specified, but the
-@value{op-listed-incremental} option must still be given. A
-placeholder @var{snapshot-file} can be specified, e.g.,
-@file{/dev/null}.
+Note that incremental archives use @command{tar} extensions and may
+not be readable by non-@acronym{GNU} versions of the @command{tar} program.
+
+@xopindex{listed-incremental, using with @option{--extract}}
+@xopindex{extract, using with @option{--listed-incremental}}
+To extract from the incremental dumps, use
+@option{--listed-incremental} together with @option{--extract}
+option (@pxref{extracting files}). In this case, @command{tar} does
+not need to access snapshot file, since all the data necessary for
+extraction are stored in the archive itself. So, when extracting, you
+can give whatever argument to @option{--listed-incremental}, the usual
+practice is to use @option{--listed-incremental=/dev/null}.
+Alternatively, you can use @option{--incremental}, which needs no
+arguments. In general, @option{--incremental} (@option{-G}) can be
+used as a shortcut for @option{--listed-incremental} when listing or
+extracting incremental backups (for more information, regarding this
+option, @pxref{incremental-op}).
+
+When extracting from the incremental backup @GNUTAR{} attempts to
+restore the exact state the file system had when the archive was
+created. In particular, it will @emph{delete} those files in the file
+system that did not exist in their directories when the archive was
+created. If you have created several levels of incremental files,
+then in order to restore the exact contents the file system had when
+the last level was created, you will need to restore from all backups
+in turn. Continuing our example, to restore the state of @file{/usr}
+file system, one would do@footnote{Notice, that since both archives
+were created without @option{-P} option (@pxref{absolute}), these
+commands should be run from the root file system.}:
+
+@smallexample
+$ @kbd{tar --extract \
+ --listed-incremental=/dev/null \
+ --file archive.1.tar}
+$ @kbd{tar --extract \
+ --listed-incremental=/dev/null \
+ --file archive.2.tar}
+@end smallexample
+
+To list the contents of an incremental archive, use @option{--list}
+(@pxref{list}), as usual. To obtain more information about the
+archive, use @option{--listed-incremental} or @option{--incremental}
+combined with two @option{--verbose} options@footnote{Two
+@option{--verbose} options were selected to avoid breaking usual
+verbose listing output (@option{--list --verbose}) when using in
+scripts.
+
+@xopindex{incremental, using with @option{--list}}
+@xopindex{listed-incremental, using with @option{--list}}
+@xopindex{list, using with @option{--incremental}}
+@xopindex{list, using with @option{--listed-incremental}}
+Versions of @GNUTAR{} up to 1.15.1 used to dump verbatim binary
+contents of the DUMPDIR header (with terminating nulls) when
+@option{--incremental} or @option{--listed-incremental} option was
+given, no matter what the verbosity level. This behavior, and,
+especially, the binary output it produced were considered inconvenient
+and were changed in version 1.16}:
+
+@smallexample
+@kbd{tar --list --incremental --verbose --verbose archive.tar}
+@end smallexample
+
+This command will print, for each directory in the archive, the list
+of files in that directory at the time the archive was created. This
+information is put out in a format which is both human-readable and
+unambiguous for a program: each file name is printed as
+
+@smallexample
+@var{x} @var{file}
+@end smallexample
-@FIXME{this section needs to be written}
+@noindent
+where @var{x} is a letter describing the status of the file: @samp{Y}
+if the file is present in the archive, @samp{N} if the file is not
+included in the archive, or a @samp{D} if the file is a directory (and
+is included in the archive). @xref{Dumpdir}, for the detailed
+description of dumpdirs and status codes. Each such
+line is terminated by a newline character. The last line is followed
+by an additional newline to indicate the end of the data.
+
+@anchor{incremental-op}The option @option{--incremental} (@option{-G})
+gives the same behavior as @option{--listed-incremental} when used
+with @option{--list} and @option{--extract} options. When used with
+@option{--create} option, it creates an incremental archive without
+creating snapshot file. Thus, it is impossible to create several
+levels of incremental backups with @option{--incremental} option.
@node Backup Levels
@section Levels of Backups
Before you use these scripts, you need to edit the file
@file{backup-specs}, which specifies parameters used by the backup
-scripts and by the restore script. This file is usually located
-in @file{/etc/backup} directory. @FIXME-xref{Script Syntax} Once the
-backup parameters are set, you can perform backups or restoration by
-running the appropriate script.
+scripts and by the restore script. This file is usually located
+in @file{/etc/backup} directory. @xref{Backup Parameters}, for its
+detailed description. Once the backup parameters are set, you can
+perform backups or restoration by running the appropriate script.
-The name of the backup script is @code{backup}. The name of the
-restore script is @code{restore}. The following sections describe
+The name of the backup script is @code{backup}. The name of the
+restore script is @code{restore}. The following sections describe
their use in detail.
@emph{Please Note:} The backup and restoration scripts are
designed to be used together. While it is possible to restore files by
hand from an archive which was created using a backup script, and to create
an archive by hand which could then be extracted using the restore script,
-it is easier to use the scripts. @value{xref-incremental}, and
-@value{xref-listed-incremental}, before making such an attempt.
+it is easier to use the scripts. @xref{Incremental Dumps}, before
+making such an attempt.
@node Backup Parameters
@section Setting Parameters for Backups and Restoration
before using these scripts.
Syntactically, @file{backup-specs} is a shell script, containing
-mainly variable assignments. However, any valid shell construct
-is allowed in this file. Particularly, you may wish to define
-functions within that script (e.g. see @code{RESTORE_BEGIN} below).
+mainly variable assignments. However, any valid shell construct
+is allowed in this file. Particularly, you may wish to define
+functions within that script (e.g., see @code{RESTORE_BEGIN} below).
For more information about shell script syntax, please refer to
@url{http://www.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#ta
-g_02, the definition of the Shell Command Language}. See also
+g_02, the definition of the Shell Command Language}. See also
@ref{Top,,Bash Features,bashref,Bash Reference Manual}.
The shell variables controlling behavior of @code{backup} and
@subsection General-Purpose Variables
@defvr {Backup variable} ADMINISTRATOR
-The user name of the backup administrator. @code{Backup} scripts
+The user name of the backup administrator. @code{Backup} scripts
sends a backup report to this address.
@end defvr
@defvr {Backup variable} BACKUP_HOUR
-The hour at which the backups are done. This can be a number from 0
+The hour at which the backups are done. This can be a number from 0
to 23, or the time specification in form @var{hours}:@var{minutes},
or the string @samp{now}.
-This variable is used by @code{backup}. Its value may be overridden
+This variable is used by @code{backup}. Its value may be overridden
using @option{--time} option (@pxref{Scripted Backups}).
@end defvr
@defvr {Backup variable} TAPE_FILE
-The device @command{tar} writes the archive to. This device should be
-attached to the host on which the dump scripts are run.
+
+The device @command{tar} writes the archive to. If @var{TAPE_FILE}
+is a remote archive (@pxref{remote-dev}), backup script will suppose
+that your @command{mt} is able to access remote devices. If @var{RSH}
+(@pxref{RSH}) is set, @option{--rsh-command} option will be added to
+invocations of @command{mt}.
@end defvr
@defvr {Backup variable} BLOCKING
The blocking factor @command{tar} will use when writing the dump archive.
-@value{xref-blocking-factor}.
+@xref{Blocking Factor}.
@end defvr
@defvr {Backup variable} BACKUP_DIRS
A list of file systems to be dumped (for @code{backup}), or restored
-(for @code{restore}). You can include any directory
+(for @code{restore}). You can include any directory
name in the list --- subdirectories on that file system will be
included, regardless of how they may look to other networked machines.
Subdirectories on other file systems will be ignored.
the host machine must have @GNUTAR{} installed, and
must be able to access the directory containing the backup scripts and
their support files using the same file name that is used on the
-machine where the scripts are run (ie. what @command{pwd} will print
+machine where the scripts are run (i.e., what @command{pwd} will print
when in that directory on that machine). If the host that contains
the file system does not have this capability, you can specify another
host as long as it can access the file system through NFS.
If the list of file systems is very long you may wish to put it
-in a separate file. This file is usually named
+in a separate file. This file is usually named
@file{/etc/backup/dirs}, but this name may be overridden in
@file{backup-specs} using @code{DIRLIST} variable.
@end defvr
@defvr {Backup variable} DIRLIST
-A path to the file containing the list of the filesystems to backup
-or restore. By default it is @file{/etc/backup/dirs}.
+A path to the file containing the list of the file systems to backup
+or restore. By default it is @file{/etc/backup/dirs}.
@end defvr
@defvr {Backup variable} BACKUP_FILES
A list of individual files to be dumped (for @code{backup}), or restored
-(for @code{restore}). These should be accessible from the machine on
+(for @code{restore}). These should be accessible from the machine on
which the backup script is run.
If the list of file systems is very long you may wish to store it
-in a separate file. This file is usually named
+in a separate file. This file is usually named
@file{/etc/backup/files}, but this name may be overridden in
@file{backup-specs} using @code{FILELIST} variable.
@end defvr
@defvr {Backup variable} FILELIST
A path to the file containing the list of the individual files to backup
-or restore. By default it is @file{/etc/backup/files}.
+or restore. By default it is @file{/etc/backup/files}.
@end defvr
-@defvr {Backup variable} RSH
+@defvr {Backup variable} MT
+
+Full file name of @command{mt} binary.
+@end defvr
-Path to @code{rsh} binary or its equivalent. You may wish to
-set it to @code{ssh}, to improve security. In this case you will have
+@defvr {Backup variable} RSH
+@anchor{RSH}
+Full file name of @command{rsh} binary or its equivalent. You may wish to
+set it to @code{ssh}, to improve security. In this case you will have
to use public key authentication.
@end defvr
@defvr {Backup variable} RSH_COMMAND
-Path to rsh binary on remote mashines. This will be passed via
-@option{--rsh-command} option to the remote invocation of @GNUTAR{}.
+Full file name of @command{rsh} binary on remote machines. This will
+be passed via @option{--rsh-command} option to the remote invocation
+of @GNUTAR{}.
@end defvr
@defvr {Backup variable} VOLNO_FILE
Name of temporary file to hold volume numbers. This needs to be accessible
-by all the machines which have filesystems to be dumped.
+by all the machines which have file systems to be dumped.
@end defvr
@defvr {Backup variable} XLIST
-Name of @dfn{exclude file list}. An @dfn{exclude file list} is a file
+Name of @dfn{exclude file list}. An @dfn{exclude file list} is a file
located on the remote machine and containing the list of files to
-be excluded from the backup. Exclude file lists are searched in
-/etc/tar-backup directory. A common use for exclude file lists
+be excluded from the backup. Exclude file lists are searched in
+/etc/tar-backup directory. A common use for exclude file lists
is to exclude files containing security-sensitive information
-(e.g. @file{/etc/shadow} from backups.
+(e.g., @file{/etc/shadow} from backups).
This variable affects only @code{backup}.
@end defvr
@defvr {Backup variable} SLEEP_TIME
-Time to sleep between dumps of any two successive filesystems
+Time to sleep between dumps of any two successive file systems
This variable affects only @code{backup}.
@end defvr
@defvr {Backup variable} DUMP_REMIND_SCRIPT
Script to be run when it's time to insert a new tape in for the next
-volume. Administrators may want to tailor this script for their site.
-If this variable isn't set, @GNUTAR{} will display its built-in prompt
-@FIXME-xref{describe it somewhere!}, and will expect confirmation from
-the console.
+volume. Administrators may want to tailor this script for their site.
+If this variable isn't set, @GNUTAR{} will display its built-in
+prompt, and will expect confirmation from the console. For the
+description of the default prompt, see @ref{change volume prompt}.
+
@end defvr
@defvr {Backup variable} SLEEP_MESSAGE
@defvr {Backup variable} TAR
-Pathname of the @GNUTAR{} executable. If this is not set, backup
+Full file name of the @GNUTAR{} executable. If this is not set, backup
scripts will search @command{tar} in the current shell path.
@end defvr
Backup scripts access tape device using special @dfn{hook functions}.
These functions take a single argument -- the name of the tape
-device. Their names are kept in the following variables:
+device. Their names are kept in the following variables:
@defvr {Backup variable} MT_BEGIN
-The name of @dfn{begin} function. This function is called before
-accessing the drive. By default it retensions the tape:
+The name of @dfn{begin} function. This function is called before
+accessing the drive. By default it retensions the tape:
@smallexample
MT_BEGIN=mt_begin
@end defvr
@defvr {Backup variable} MT_REWIND
-THe name of @dfn{rewind} function. The default definition is as
+The name of @dfn{rewind} function. The default definition is as
follows:
@smallexample
@end defvr
@defvr {Backup variable} MT_OFFLINE
-The name of the function switching the tape off line. By default
+The name of the function switching the tape off line. By default
it is defined as follows:
@smallexample
@defvr {Backup variable} MT_STATUS
The name of the function used to obtain the status of the archive device,
-including error count. Default definition:
+including error count. Default definition:
@smallexample
MT_STATUS=mt_status
@subsection User Hooks
@dfn{User hooks} are shell functions executed before and after
-each @command{tar} invocations. Thus, there are @dfn{backup
+each @command{tar} invocation. Thus, there are @dfn{backup
hooks}, which are executed before and after dumping each file
system, and @dfn{restore hooks}, executed before and
-after restoring a file system. Each user hook is a shell function
+after restoring a file system. Each user hook is a shell function
taking four arguments:
@deffn {User Hook Function} hook @var{level} @var{host} @var{fs} @var{fsname}
-The arguments are:
+Its arguments are:
@table @var
@item level
Name or IP address of the host machine being dumped or restored.
@item fs
-Full path name to the filesystem being dumped or restored.
+Full path name to the file system being dumped or restored.
@item fsname
-Filesystem name with directory separators replaced with colons. This
-is useful e.g. for creating unique files.
+File system name with directory separators replaced with colons. This
+is useful, e.g., for creating unique files.
@end table
@end deffn
Following variables keep the names of user hook functions
@defvr {Backup variable} DUMP_BEGIN
-Dump begin function. It is executed before dumping the filesystem.
+Dump begin function. It is executed before dumping the file system.
@end defvr
@defvr {Backup variable} DUMP_END
-Executed after dumping the filesystem.
+Executed after dumping the file system.
@end defvr
@defvr {Backup variable} RESTORE_BEGIN
-Executed before restoring the filesystem.
+Executed before restoring the file system.
@end defvr
@defvr {Backup variable} RESTORE_END
-Executed after restoring the filesystem.
+Executed after restoring the file system.
@end defvr
@node backup-specs example
@subsection An Example Text of @file{Backup-specs}
-The following is the text of @file{backup-specs} as it appears at FSF:
+The following is an example of @file{backup-specs}:
@smallexample
# site-specific parameters for file system backup.
backup --level=@var{level} --time=@var{time}
@end smallexample
-The @option{level} option requests the dump level. Thus, to produce
+The @option{level} option requests the dump level. Thus, to produce
a full dump, specify @code{--level=0} (this is the default, so
@option{--level} may be omitted if its value is @code{0}).
@footnote{For backward compatibility, the @code{backup} will also
try to deduce the requested dump level from the name of the
-script itself. If the name consists of a string @samp{level-}
+script itself. If the name consists of a string @samp{level-}
followed by a single decimal digit, that digit is taken as
-the dump level number. Thus, you may create a link from @code{backup}
+the dump level number. Thus, you may create a link from @code{backup}
to @code{level-1} and then run @code{level-1} whenever you need to
create a level one dump.}
The @option{--time} option determines when should the backup be
-run. @var{Time} may take three forms:
+run. @var{Time} may take three forms:
@table @asis
@item @var{hh}:@var{mm}
record file in @file{/etc/tar-backup/}, which is used by the scripts
to store and retrieve information about which files were dumped. This
file is not meant to be read by humans, and should not be deleted by
-them. @FIXME-xref{incremental and listed-incremental, for a more
-detailed explanation of this file.}
+them. @xref{Snapshot Files}, for a more detailed explanation of this
+file.
The second file is a log file containing the names of the file systems
and files dumped, what time the backup was made, and any error
messages that were generated, as well as how much space was left in
the media volume after the last volume of the archive was written.
You should check this log file after every backup. The file name is
-@file{log-@var{mmm-ddd-yyyy}-level-@var{n}}, where @var{n} represents
-current dump level number.
+@file{log-@var{mm-dd-yyyy}-level-@var{n}}, where @var{mm-dd-yyyy}
+represents current date, and @var{n} represents current dump level number.
The script also prints the name of each system being dumped to the
standard output.
@itemx --force
Force backup even if today's log file already exists.
-@item -v@var{level}
+@item -v[@var{level}]
@itemx --verbose[=@var{level}]
-Set verbosity level. The higher the level is, the more debugging
-information will be output during execution. Devault @var{level}
+Set verbosity level. The higher the level is, the more debugging
+information will be output during execution. Default @var{level}
is 100, which means the highest debugging level.
@item -t @var{start-time}
@itemx --help
Display short help message and exit.
-@item -L
-@itemx --license
-Display program license and exit.
-
@item -V
@itemx --version
-Display program version and exit.
+Display information about the program's name, version, origin and legal
+status, all on standard output, and then exit successfully.
@end table
@section Using the Restore Script
To restore files that were archived using a scripted backup, use the
-@code{restore} script. Its usage is quite straightforward. In the
-simplest form, invoke @command{restore} without options, it will
-then restore all the filesystems and files specified in
+@code{restore} script. Its usage is quite straightforward. In the
+simplest form, invoke @code{restore --all}, it will
+then restore all the file systems and files specified in
@file{backup-specs} (@pxref{General-Purpose Variables,BACKUP_DIRS}).
-You may select the filesystems (and/or files) to restore by
+You may select the file systems (and/or files) to restore by
giving @code{restore} list of @dfn{patterns} in its command
-line. For example, running
+line. For example, running
@smallexample
restore 'albert:*'
@end smallexample
@noindent
-will restore all filesystems on the machine @samp{albert}. A more
+will restore all file systems on the machine @samp{albert}. A more
complicated example:
@smallexample
@end smallexample
@noindent
-This command will restore all filesystems on the machine @samp{albert}
-as well as @file{/var} filesystem on all machines.
+This command will restore all file systems on the machine @samp{albert}
+as well as @file{/var} file system on all machines.
By default @code{restore} will start restoring files from the lowest
available dump level (usually zero) and will continue through
-all available dump levels. There may be situations where such a
-thorough restore is not necessary. For example, you may wish to
-restore only files from the recent level one backup. To do so,
+all available dump levels. There may be situations where such a
+thorough restore is not necessary. For example, you may wish to
+restore only files from the recent level one backup. To do so,
use @option{--level} option, as shown in the example below:
@smallexample
The full list of options accepted by @code{restore} follows:
@table @option
+@item -a
+@itemx --all
+Restore all file systems and files specified in @file{backup-specs}
+
@item -l @var{level}
@itemx --level=@var{level}
Start restoring from the given backup level, instead of the default 0.
-@item -v@var{level}
+@item -v[@var{level}]
@itemx --verbose[=@var{level}]
-Set verbosity level. The higher the level is, the more debugging
-information will be output during execution. Devault @var{level}
+Set verbosity level. The higher the level is, the more debugging
+information will be output during execution. Default @var{level}
is 100, which means the highest debugging level.
@item -h
@itemx --help
Display short help message and exit.
-@item -L
-@itemx --license
-Display program license and exit.
-
@item -V
@itemx --version
-Display program version and exit.
+Display information about the program's name, version, origin and legal
+status, all on standard output, and then exit successfully.
@end table
You should start the restore script with the media containing the
volumes as they are needed. If the archive is on tape, you don't need
to rewind the tape to to its beginning---if the tape head is
positioned past the beginning of the archive, the script will rewind
-the tape as needed. @FIXME-xref{Media, for a discussion of tape
-positioning.}
+the tape as needed. @xref{Tape Positioning}, for a discussion of tape
+positioning.
@quotation
@strong{Warning:} The script will delete files from the active file
system if they were not in the file system when the archive was made.
@end quotation
-@value{xref-incremental}, and @value{ref-listed-incremental},
-for an explanation of how the script makes that determination.
+@xref{Incremental Dumps}, for an explanation of how the script makes
+that determination.
@node Choosing
@chapter Choosing Files and Names for @command{tar}
@UNREVISED
-@FIXME{Melissa (still) Doesn't Really Like This ``Intro'' Paragraph!!!}
-
Certain options to @command{tar} enable you to specify a name for your
archive. Other options let you decide which files to include or exclude
from the archive, based on when or whether files were modified, whether
the file names do or don't match specified patterns, or whether files
are in specified directories.
+This chapter discusses these options in detail.
+
@menu
* file:: Choosing the Archive's Name
* Selecting Archive Members::
* files:: Reading Names from a File
* exclude:: Excluding Some Files
-* Wildcards::
+* wildcards:: Wildcards Patterns and Matching
+* quoting styles:: Ways of Quoting Special Characters in Names
+* transform:: Modifying File and Member Names
* after:: Operating Only on New Files
* recurse:: Descending into Directories
-* one:: Crossing Filesystem Boundaries
+* one:: Crossing File System Boundaries
@end menu
@node file
@section Choosing and Naming Archive Files
+@UNREVISED
+
@cindex Naming an archive
@cindex Archive Name
-@cindex Directing output
@cindex Choosing an archive file
@cindex Where is the archive?
-@UNREVISED
-
-@FIXME{should the title of this section actually be, "naming an
-archive"?}
-
By default, @command{tar} uses an archive file name that was compiled when
it was built on the system; usually this name refers to some physical
tape drive on the machine. However, the person who installed @command{tar}
-on the system may not set the default to a meaningful value as far as
+on the system may not have set the default to a meaningful value as far as
most users are concerned. As a result, you will usually want to tell
-@command{tar} where to find (or create) the archive. The @value{op-file}
+@command{tar} where to find (or create) the archive. The
+@option{--file=@var{archive-name}} (@option{-f @var{archive-name}})
option allows you to either specify or name a file to use as the archive
instead of the default archive file location.
-@table @kbd
+@table @option
+@xopindex{file, short description}
@item --file=@var{archive-name}
@itemx -f @var{archive-name}
Name the archive to create or operate on. Use in conjunction with
@noindent
@file{collection.tar} is the name of the archive. It must directly
-follow the @samp{-f} option, since whatever directly follows @samp{-f}
+follow the @option{-f} option, since whatever directly follows @option{-f}
@emph{will} end up naming the archive. If you neglect to specify an
archive name, you may end up overwriting a file in the working directory
with the archive you create since @command{tar} will use this file's name
If you do not name the archive, @command{tar} uses the value of the
environment variable @env{TAPE} as the file name for the archive. If
that is not available, @command{tar} uses a default, compiled-in archive
-name, usually that for tape unit zero (ie. @file{/dev/tu00}).
-@command{tar} always needs an archive name.
+name, usually that for tape unit zero (i.e., @file{/dev/tu00}).
+@cindex Standard input and output
+@cindex tar to standard input and output
If you use @file{-} as an @var{archive-name}, @command{tar} reads the
archive from standard input (when listing or extracting files), or
writes it to standard output (when creating an archive). If you use
@command{tar} reads the original archive from its standard input and
writes the entire new archive to its standard output.
-@FIXME{might want a different example here; this is already used in
-"notable tar usages".}
+The following example is a convenient way of copying directory
+hierarchy from @file{sourcedir} to @file{targetdir}.
@smallexample
-$ @kbd{cd sourcedir; tar -cf - . | (cd targetdir; tar -xf -)}
+$ @kbd{(cd sourcedir; tar -cf - .) | (cd targetdir; tar -xpf -)}
@end smallexample
-@FIXME{help!}
+The @option{-C} option allows to avoid using subshells:
-@cindex Standard input and output
-@cindex tar to standard input and output
+@smallexample
+$ @kbd{tar -C sourcedir -cf - . | tar -C targetdir -xpf -}
+@end smallexample
+
+In both examples above, the leftmost @command{tar} invocation archives
+the contents of @file{sourcedir} to the standard output, while the
+rightmost one reads this archive from its standard input and
+extracts it. The @option{-p} option tells it to restore permissions
+of the extracted files.
+
+@cindex Remote devices
+@cindex tar to a remote device
+@anchor{remote-dev}
To specify an archive file on a device attached to a remote machine,
use the following:
@smallexample
-@kbd{--file=@var{hostname}:/@var{dev}/@var{file name}}
+@kbd{--file=@var{hostname}:/@var{dev}/@var{file-name}}
@end smallexample
@noindent
@command{tar} will complete the remote connection, if possible, and
prompt you for a username and password. If you use
-@samp{--file=@@@var{hostname}:/@var{dev}/@var{file name}}, @command{tar}
+@option{--file=@@@var{hostname}:/@var{dev}/@var{file-name}}, @command{tar}
will complete the remote connection, if possible, using your username
as the username on the remote machine.
+@cindex Local and remote archives
+@anchor{local and remote archives}
If the archive file name includes a colon (@samp{:}), then it is assumed
to be a file on another machine. If the archive file is
@samp{@var{user}@@@var{host}:@var{file}}, then @var{file} is used on the
(along with the @samp{@@} sign), then your user name will be used.
(This is the normal @command{rsh} behavior.) It is necessary for the
remote machine, in addition to permitting your @command{rsh} access, to
-have the @file{/usr/ucb/rmt} program installed. If you need to use a
-file whose name includes a colon, then the remote tape drive behavior
-can be inhibited by using the @value{op-force-local} option.
-
-@FIXME{i know we went over this yesterday, but bob (and now i do again,
-too) thinks it's out of the middle of nowhere. it doesn't seem to tie
-into what came before it well enough <<i moved it now, is it better
-here?>>. bob also comments that if Amanda isn't free software, we
-shouldn't mention it..}
+have the @file{rmt} program installed (This command is included in
+the @GNUTAR{} distribution and by default is installed under
+@file{@var{prefix}/libexec/rmt}, were @var{prefix} means your
+installation prefix). If you need to use a file whose name includes a
+colon, then the remote tape drive behavior
+can be inhibited by using the @option{--force-local} option.
When the archive is being created to @file{/dev/null}, @GNUTAR{}
-tries to minimize input and output operations. The
-Amanda backup system, when used with @GNUTAR{}, has
-an initial sizing pass which uses this feature.
+tries to minimize input and output operations. The Amanda backup
+system, when used with @GNUTAR{}, has an initial sizing pass which
+uses this feature.
@node Selecting Archive Members
@section Selecting Archive Members
@kbd{tar} @var{operation} [@var{option1} @var{option2} @dots{}] [@var{file name-1} @var{file name-2} @dots{}]
@end smallexample
+If a file name begins with dash (@samp{-}), precede it with
+@option{--add-file} option to prevent it from being treated as an
+option.
+
+@anchor{input name quoting}
+By default @GNUTAR{} attempts to @dfn{unquote} each file or member
+name, replacing @dfn{escape sequences} according to the following
+table:
+
+@multitable @columnfractions 0.20 0.60
+@headitem Escape @tab Replaced with
+@item \a @tab Audible bell (ASCII 7)
+@item \b @tab Backspace (ASCII 8)
+@item \f @tab Form feed (ASCII 12)
+@item \n @tab New line (ASCII 10)
+@item \r @tab Carriage return (ASCII 13)
+@item \t @tab Horizontal tabulation (ASCII 9)
+@item \v @tab Vertical tabulation (ASCII 11)
+@item \? @tab ASCII 127
+@item \@var{n} @tab ASCII @var{n} (@var{n} should be an octal number
+ of up to 3 digits)
+@end multitable
+
+A backslash followed by any other symbol is retained.
+
+This default behavior is controlled by the following command line
+option:
+
+@table @option
+@opindex unquote
+@item --unquote
+Enable unquoting input file or member names (default).
+
+@opindex no-unquote
+@item --no-unquote
+Disable unquoting input file or member names.
+@end table
+
If you specify a directory name as a file name argument, all the files
in that directory are operated on by @command{tar}.
-If you do not specify files when @command{tar} is invoked with
-@value{op-create}, @command{tar} operates on all the non-directory files in
-the working directory. If you specify either @value{op-list} or
-@value{op-extract}, @command{tar} operates on all the archive members in the
-archive. If you specify any operation other than one of these three,
-@command{tar} does nothing.
+If you do not specify files, @command{tar} behavior differs depending
+on the operation mode as described below:
+
+When @command{tar} is invoked with @option{--create} (@option{-c}),
+@command{tar} will stop immediately, reporting the following:
+
+@smallexample
+@group
+$ @kbd{tar cf a.tar}
+tar: Cowardly refusing to create an empty archive
+Try `tar --help' or `tar --usage' for more information.
+@end group
+@end smallexample
+
+If you specify either @option{--list} (@option{-t}) or
+@option{--extract} (@option{--get}, @option{-x}), @command{tar}
+operates on all the archive members in the archive.
+
+If run with @option{--diff} option, tar will compare the archive with
+the contents of the current working directory.
+
+If you specify any other operation, @command{tar} does nothing.
By default, @command{tar} takes file names from the command line. However,
there are other ways to specify file or member names, or to modify the
manner in which @command{tar} selects the files or members upon which to
-operate. @FIXME{add xref here}In general, these methods work both for
-specifying the names of files and archive members.
+operate. In general, these methods work both for specifying the names
+of files and archive members.
@node files
@section Reading Names from a File
-@UNREVISED
@cindex Reading file names from a file
@cindex Lists of file names
@cindex File Name arguments, alternatives
Instead of giving the names of files or archive members on the command
line, you can put the names into a file, and then use the
-@value{op-files-from} option to @command{tar}. Give the name of the file
-which contains the list of files to include as the argument to
-@samp{--files-from}. In the list, the file names should be separated by
+@option{--files-from=@var{file-of-names}} (@option{-T
+@var{file-of-names}}) option to @command{tar}. Give the name of the
+file which contains the list of files to include as the argument to
+@option{--files-from}. In the list, the file names should be separated by
newlines. You will frequently use this option when you have generated
the list of files to archive with the @command{find} utility.
-@table @kbd
-@item --files-from=@var{file name}
-@itemx -T @var{file name}
-Get names to extract or create from file @var{file name}.
+@table @option
+@opindex files-from
+@item --files-from=@var{file-name}
+@itemx -T @var{file-name}
+Get names to extract or create from file @var{file-name}.
@end table
-If you give a single dash as a file name for @samp{--files-from}, (i.e.,
-you specify either @samp{--files-from=-} or @samp{-T -}), then the file
+If you give a single dash as a file name for @option{--files-from}, (i.e.,
+you specify either @code{--files-from=-} or @code{-T -}), then the file
names are read from standard input.
-Unless you are running @command{tar} with @samp{--create}, you can not use
-both @samp{--files-from=-} and @samp{--file=-} (@samp{-f -}) in the same
+Unless you are running @command{tar} with @option{--create}, you can not use
+both @code{--files-from=-} and @code{--file=-} (@code{-f -}) in the same
command.
-@FIXME{add bob's example, from his message on 2-10-97}
+Any number of @option{-T} options can be given in the command line.
The following example shows how to use @command{find} to generate a list of
files smaller than 400K in length and put that list into a file
-called @file{small-files}. You can then use the @samp{-T} option to
+called @file{small-files}. You can then use the @option{-T} option to
@command{tar} to specify the files from that file, @file{small-files}, to
-create the archive @file{little.tgz}. (The @samp{-z} option to
+create the archive @file{little.tgz}. (The @option{-z} option to
@command{tar} compresses the archive with @command{gzip}; @pxref{gzip} for
more information.)
@smallexample
-$ @kbd{find . -size -400 -print > small-files}
+$ @kbd{find . -size -400 -print > small-files}
$ @kbd{tar -c -v -z -T small-files -f little.tgz}
@end smallexample
@noindent
-@FIXME{say more here to conclude the example/section?}
+In the file list given by @option{-T} option, any file name beginning
+with @samp{-} character is considered a @command{tar} option and is
+processed accordingly.@footnote{Versions of @GNUTAR{} up to 1.15.1
+recognized only @option{-C} option in file lists, and only if the
+option and its argument occupied two consecutive lines.} For example,
+the common use of this feature is to change to another directory by
+specifying @option{-C} option:
+
+@smallexample
+@group
+$ @kbd{cat list}
+-C/etc
+passwd
+hosts
+-C/lib
+libc.a
+$ @kbd{tar -c -f foo.tar --files-from list}
+@end group
+@end smallexample
+
+@noindent
+In this example, @command{tar} will first switch to @file{/etc}
+directory and add files @file{passwd} and @file{hosts} to the
+archive. Then it will change to @file{/lib} directory and will archive
+the file @file{libc.a}. Thus, the resulting archive @file{foo.tar} will
+contain:
+
+@smallexample
+@group
+$ @kbd{tar tf foo.tar}
+passwd
+hosts
+libc.a
+@end group
+@end smallexample
+
+@noindent
+@xopindex{directory, using in @option{--files-from} argument}
+Notice that the option parsing algorithm used with @option{-T} is
+stricter than the one used by shell. Namely, when specifying option
+arguments, you should observe the following rules:
+
+@itemize @bullet
+@item
+When using short (single-letter) option form, its argument must
+immediately follow the option letter, without any intervening
+whitespace. For example: @code{-Cdir}.
+
+@item
+When using long option form, the option argument must be separated
+from the option by a single equal sign. No whitespace is allowed on
+any side of the equal sign. For example: @code{--directory=dir}.
+
+@item
+For both short and long option forms, the option argument can be given
+on the next line after the option name, e.g.:
+
+@smallexample
+@group
+--directory
+dir
+@end group
+@end smallexample
+
+@noindent
+and
+
+@smallexample
+@group
+-C
+dir
+@end group
+@end smallexample
+@end itemize
+
+@opindex add-file
+If you happen to have a file whose name starts with @samp{-},
+precede it with @option{--add-file} option to prevent it from
+being recognized as an option. For example: @code{--add-file=--my-file}.
@menu
* nul::
@end menu
@node nul
-@subsection @kbd{NUL} Terminated File Names
+@subsection @code{NUL} Terminated File Names
-@cindex File names, terminated by @kbd{NUL}
-@cindex @kbd{NUL} terminated file names
-The @value{op-null} option causes @value{op-files-from} to read file
-names terminated by a @code{NUL} instead of a newline, so files whose
-names contain newlines can be archived using @samp{--files-from}.
+@cindex File names, terminated by @code{NUL}
+@cindex @code{NUL} terminated file names
+The @option{--null} option causes
+@option{--files-from=@var{file-of-names}} (@option{-T @var{file-of-names}})
+to read file names terminated by a @code{NUL} instead of a newline, so
+files whose names contain newlines can be archived using
+@option{--files-from}.
-@table @kbd
+@table @option
+@opindex null
@item --null
-Only consider @kbd{NUL} terminated file names, instead of files that
+Only consider @code{NUL} terminated file names, instead of files that
terminate in a newline.
@end table
-The @samp{--null} option is just like the one in @acronym{GNU}
+The @option{--null} option is just like the one in @acronym{GNU}
@command{xargs} and @command{cpio}, and is useful with the
-@samp{-print0} predicate of @acronym{GNU} @command{find}. In
-@command{tar}, @samp{--null} also causes @value{op-directory} options
-to be treated as file names to archive, in case there are any files
-out there called @file{-C}.
+@option{-print0} predicate of @acronym{GNU} @command{find}. In
+@command{tar}, @option{--null} also disables special handling for
+file names that begin with dash.
This example shows how to use @command{find} to generate a list of files
larger than 800K in length and put that list into a file called
-@file{long-files}. The @samp{-print0} option to @command{find} just just
-like @samp{-print}, except that it separates files with a @kbd{NUL}
+@file{long-files}. The @option{-print0} option to @command{find} is just
+like @option{-print}, except that it separates files with a @code{NUL}
rather than with a newline. You can then run @command{tar} with both the
-@samp{--null} and @samp{-T} options to specify that @command{tar} get the
+@option{--null} and @option{-T} options to specify that @command{tar} get the
files from that file, @file{long-files}, to create the archive
-@file{big.tgz}. The @samp{--null} option to @command{tar} will cause
-@command{tar} to recognize the @kbd{NUL} separator between files.
+@file{big.tgz}. The @option{--null} option to @command{tar} will cause
+@command{tar} to recognize the @code{NUL} separator between files.
@smallexample
-$ @kbd{find . -size +800 -print0 > long-files}
+$ @kbd{find . -size +800 -print0 > long-files}
$ @kbd{tar -c -v --null --files-from=long-files --file=big.tar}
@end smallexample
@node exclude
@section Excluding Some Files
+@UNREVISED
+
@cindex File names, excluding files by
@cindex Excluding files by name and pattern
@cindex Excluding files by file system
-@UNREVISED
-
To avoid operating on files whose names match a particular pattern,
-use the @value{op-exclude} or @value{op-exclude-from} options.
+use the @option{--exclude} or @option{--exclude-from} options.
-@table @kbd
+@table @option
+@opindex exclude
@item --exclude=@var{pattern}
Causes @command{tar} to ignore files that match the @var{pattern}.
@end table
@findex exclude
-The @value{op-exclude} option prevents any file or member whose name
-matches the shell wildcard (@var{pattern}) from being operated on.
+The @option{--exclude=@var{pattern}} option prevents any file or
+member whose name matches the shell wildcard (@var{pattern}) from
+being operated on.
For example, to create an archive with all the contents of the directory
@file{src} except for files whose names end in @file{.o}, use the
command @samp{tar -cf src.tar --exclude='*.o' src}.
-You may give multiple @samp{--exclude} options.
+You may give multiple @option{--exclude} options.
-@table @kbd
+@table @option
+@opindex exclude-from
@item --exclude-from=@var{file}
@itemx -X @var{file}
Causes @command{tar} to ignore files that match the patterns listed in
@end table
@findex exclude-from
-Use the @samp{--exclude-from=@var{file-of-patterns}} option to read a
+Use the @option{--exclude-from} option to read a
list of patterns, one per line, from @var{file}; @command{tar} will
ignore files matching those patterns. Thus if @command{tar} is
called as @w{@samp{tar -c -X foo .}} and the file @file{foo} contains a
single line @file{*.o}, no files whose names end in @file{.o} will be
added to the archive.
-@FIXME{do the exclude options files need to have stuff separated by
-newlines the same as the files-from option does?}
-
-@menu
-* controlling pattern-patching with exclude::
-* problems with exclude::
-@end menu
+@table @option
+@opindex exclude-caches
+@item --exclude-caches
+Causes @command{tar} to ignore directories containing a cache directory tag.
+@end table
-@node controlling pattern-patching with exclude
-@unnumberedsubsec Controlling Pattern-Matching with the @code{exclude} Options
+@findex exclude-caches
+When creating an archive, the @option{--exclude-caches} option causes
+@command{tar} to exclude all directories that contain a @dfn{cache
+directory tag}. A cache directory tag is a short file with the
+well-known name @file{CACHEDIR.TAG} and having a standard header
+specified in @url{http://www.brynosaurus.com/cachedir/spec.html}.
+Various applications write cache directory tags into directories they
+use to hold regenerable, non-precious data, so that such data can be
+more easily excluded from backups.
+
+@findex exclude-tag
+Another option, @option{--exclude-tag}, provides a generalization of
+this concept. It takes a single argument, a file name to look for.
+Any directory that contains this file will be excluded from the dump.
-Normally, a pattern matches a name if an initial subsequence of the
-name's components matches the pattern, where @samp{*}, @samp{?}, and
-@samp{[...]} are the usual shell wildcards, @samp{\} escapes wildcards,
-and wildcards can match @samp{/}.
+@table @option
+@opindex exclude-tag
+@item --exclude-tag=@var{file}
+Causes @command{tar} to ignore directories containing @var{file}.
+@end table
-Other than optionally stripping leading @samp{/} from names
-(@pxref{absolute}), patterns and names are used as-is. For
-example, trailing @samp{/} is not trimmed from a user-specified name
-before deciding whether to exclude it.
+You can specify as many exclusion tags as you like.
-However, this matching procedure can be altered by the options listed
-below. These options accumulate. For example:
+Notice, that when speaking about ``excluding the directory'' we mean
+that the files and subdirectories it contains will not get into the
+archive, while the entry for the directory itself will, e.g.:
@smallexample
---ignore-case --exclude='makefile' --no-ignore-case ---exclude='readme'
+$ @kbd{find dir}
+dir
+dir/blues
+dir/jazz
+dir/folk
+dir/folk/tagfile
+$ @kbd{tar -cf archive.tar --extract-tag=tagfile -v}
+dir/
+dir/blues
+dir/jazz
+dir/folk/
+./tar: dir/folk/: contains a cache directory tag tagfile; not dumped
+$ @kbd{tar -tf archive.tar}
+dir/
+dir/blues
+dir/jazz
+dir/folk/
@end smallexample
-ignores case when excluding @samp{makefile}, but not when excluding
-@samp{readme}.
-
-@table @option
-@item --anchored
-@itemx --no-anchored
-If anchored (the default), a pattern must match an initial subsequence
-of the name's components. Otherwise, the pattern can match any subsequence.
-
-@item --ignore-case
-@itemx --no-ignore-case
-When ignoring case, upper-case patterns match lower-case names and vice versa.
-When not ignoring case (the default), matching is case-sensitive.
-
-@item --wildcards
-@itemx --no-wildcards
-When using wildcards (the default), @samp{*}, @samp{?}, and @samp{[...]}
-are the usual shell wildcards, and @samp{\} escapes wildcards.
-Otherwise, none of these characters are special, and patterns must match
-names literally.
-
-@item --wildcards-match-slash
-@itemx --no-wildcards-match-slash
-When wildcards match slash (the default), a wildcard like @samp{*} in
-the pattern can match a @samp{/} in the name. Otherwise, @samp{/} is
-matched only by @samp{/}.
-
-@end table
-
-The @option{--recursion} and @option{--no-recursion} options
-(@pxref{recurse}) also affect how exclude patterns are interpreted. If
-recursion is in effect, a pattern excludes a name if it matches any of
-the name's parent directories.
+@menu
+* problems with exclude::
+@end menu
@node problems with exclude
@unnumberedsubsec Problems with Using the @code{exclude} Options
+@xopindex{exclude, potential problems with}
Some users find @samp{exclude} options confusing. Here are some common
pitfalls:
listed, @samp{dir.o/foo} will be excluded from the archive.
@item
-You can sometimes confuse the meanings of @value{op-exclude} and
-@value{op-exclude-from}. Be careful: use @value{op-exclude} when files
+You can sometimes confuse the meanings of @option{--exclude} and
+@option{--exclude-from}. Be careful: use @option{--exclude} when files
to be excluded are given as a pattern on the command line. Use
-@samp{--exclude-from=@var{file-of-patterns}} to introduce the name of a
-file which contains a list of patterns, one per line; each of these
-patterns can exclude zero, one, or many files.
+@option{--exclude-from} to introduce the name of a file which contains
+a list of patterns, one per line; each of these patterns can exclude
+zero, one, or many files.
@item
-When you use @value{op-exclude}, be sure to quote the @var{pattern}
-parameter, so @GNUTAR{} sees wildcard characters
+When you use @option{--exclude=@var{pattern}}, be sure to quote the
+@var{pattern} parameter, so @GNUTAR{} sees wildcard characters
like @samp{*}. If you do not do this, the shell might expand the
@samp{*} itself using files at hand, so @command{tar} might receive a
list of files instead of one pattern, or none at all, making the
rather than:
@smallexample
+# @emph{Wrong!}
$ @kbd{tar -c -f @var{archive.tar} --exclude *.o @var{directory}}
@end smallexample
might fail.
@item
+@FIXME{The change in semantics must have occurred before 1.11,
+so I doubt if it is worth mentioning at all. Anyway, should at
+least specify in which version the semantics changed.}
In earlier versions of @command{tar}, what is now the
-@samp{--exclude-from=@var{file-of-patterns}} option was called
-@samp{--exclude=@var{pattern}} instead. Now,
-@samp{--exclude=@var{pattern}} applies to patterns listed on the command
-line and @samp{--exclude-from=@var{file-of-patterns}} applies to
-patterns listed in a file.
+@option{--exclude-from} option was called @option{--exclude} instead.
+Now, @option{--exclude} applies to patterns listed on the command
+line and @option{--exclude-from} applies to patterns listed in a
+file.
@end itemize
-@node Wildcards
+@node wildcards
@section Wildcards Patterns and Matching
@dfn{Globbing} is the operation by which @dfn{wildcard} characters,
@samp{*} or @samp{?} for example, are replaced and expanded into all
-existing files matching the given pattern. However, @command{tar} often
-uses wildcard patterns for matching (or globbing) archive members instead
-of actual files in the filesystem. Wildcard patterns are also used for
+existing files matching the given pattern. @GNUTAR{} can use wildcard
+patterns for matching (or globbing) archive members when extracting
+from or listing an archive. Wildcard patterns are also used for
verifying volume labels of @command{tar} archives. This section has the
purpose of explaining wildcard syntax for @command{tar}.
Periods (@samp{.}) or forward slashes (@samp{/}) are not considered
special for wildcard matches. However, if a pattern completely matches
a directory prefix of a matched string, then it matches the full matched
-string: excluding a directory also excludes all the files beneath it.
+string: thus, excluding a directory also excludes all the files beneath it.
-@node after
-@section Operating Only on New Files
-@cindex Excluding file by age
-@cindex Modification time, excluding files by
-@cindex Age, excluding files by
-@UNREVISED
+@menu
+* controlling pattern-matching::
+@end menu
-The @value{op-after-date} option causes @command{tar} to only work on files
-whose modification or inode-changed times are newer than the @var{date}
-given. If @var{date} starts with @samp{/} or @samp{.}, it is taken to
-be a file name; the last-modified time of that file is used as the date.
-If you use this option when creating or appending to an archive,
-the archive will only include new files. If you use @samp{--after-date}
-when extracting an archive, @command{tar} will only extract files newer
-than the @var{date} you specify.
+@node controlling pattern-matching
+@unnumberedsubsec Controlling Pattern-Matching
-If you only want @command{tar} to make the date comparison based on
-modification of the actual contents of the file (rather than inode
-changes), then use the @value{op-newer-mtime} option.
+For the purposes of this section, we call @dfn{exclusion members} all
+member names obtained while processing @option{--exclude} and
+@option{--exclude-from} options, and @dfn{inclusion members} those
+member names that were given in the command line or read from the file
+specified with @option{--files-from} option.
-You may use these options with any operation. Note that these options
-differ from the @value{op-update} operation in that they allow you to
-specify a particular date against which @command{tar} can compare when
-deciding whether or not to archive the files.
+These two pairs of member lists are used in the following operations:
+@option{--diff}, @option{--extract}, @option{--list},
+@option{--update}.
-@table @kbd
-@item --after-date=@var{date}
-@itemx --newer=@var{date}
-@itemx -N @var{date}
-Only store files newer than @var{date}.
+There are no inclusion members in create mode (@option{--create} and
+@option{--append}), since in this mode the names obtained from the
+command line refer to @emph{files}, not archive members.
-Acts on files only if their modification or inode-changed times are
-later than @var{date}. Use in conjunction with any operation.
+By default, inclusion members are compared with archive members
+literally @footnote{Notice that earlier @GNUTAR{} versions used
+globbing for inclusion members, which contradicted to UNIX98
+specification and was not documented. @xref{Changes}, for more
+information on this and other changes.} and exclusion members are
+treated as globbing patterns. For example:
-If @var{date} starts with @samp{/} or @samp{.}, it is taken to be a file
-name; the last-modified time of that file is used as the date.
+@smallexample
+@group
+$ @kbd{tar tf foo.tar}
+a.c
+b.c
+a.txt
+[remarks]
+# @i{Member names are used verbatim:}
+$ @kbd{tar -xf foo.tar -v '[remarks]'}
+[remarks]
+# @i{Exclude member names are globbed:}
+$ @kbd{tar -xf foo.tar -v --exclude '*.c'}
+a.txt
+[remarks]
+@end group
+@end smallexample
-@item --newer-mtime=@var{date}
-Acts like @value{op-after-date}, but only looks at modification times.
-@end table
+This behavior can be altered by using the following options:
-These options limit @command{tar} to only operating on files which have
-been modified after the date specified. A file is considered to have
-changed if the contents have been modified, or if the owner,
-permissions, and so forth, have been changed. (For more information on
-how to specify a date, see @ref{Date input formats}; remember that the
-entire date argument must be quoted if it contains any spaces.)
+@table @option
+@opindex wildcards
+@item --wildcards
+Treat all member names as wildcards.
-Gurus would say that @value{op-after-date} tests both the @code{mtime}
-(time the contents of the file were last modified) and @code{ctime}
-(time the file's status was last changed: owner, permissions, etc)
-fields, while @value{op-newer-mtime} tests only @code{mtime} field.
+@opindex no-wildcards
+@item --no-wildcards
+Treat all member names as literal strings.
+@end table
-To be precise, @value{op-after-date} checks @emph{both} @code{mtime} and
-@code{ctime} and processes the file if either one is more recent than
-@var{date}, while @value{op-newer-mtime} only checks @code{mtime} and
-disregards @code{ctime}. Neither uses @code{atime} (the last time the
-contents of the file were looked at).
+Thus, to extract files whose names end in @samp{.c}, you can use:
-Date specifiers can have embedded spaces. Because of this, you may need
-to quote date arguments to keep the shell from parsing them as separate
-arguments.
+@smallexample
+$ @kbd{tar -xf foo.tar -v --wildcards '*.c'}
+a.c
+b.c
+@end smallexample
+
+@noindent
+Notice quoting of the pattern to prevent the shell from interpreting
+it.
-@FIXME{Need example of --newer-mtime with quoted argument.}
+The effect of @option{--wildcards} option is canceled by
+@option{--no-wildcards}. This can be used to pass part of
+the command line arguments verbatim and other part as globbing
+patterns. For example, the following invocation:
-@quotation
-@strong{Please Note:} @value{op-after-date} and @value{op-newer-mtime}
-should not be used for incremental backups. Some files (such as those
-in renamed directories) are not selected properly by these options.
-@xref{incremental and listed-incremental}.
-@end quotation
+@smallexample
+$ @kbd{tar -xf foo.tar --wildcards '*.txt' --no-wildcards '[remarks]'}
+@end smallexample
@noindent
-@FIXME{which tells -- need to fill this in!}
+instructs @command{tar} to extract from @file{foo.tar} all files whose
+names end in @samp{.txt} and the file named @file{[remarks]}.
-@node recurse
-@section Descending into Directories
-@cindex Avoiding recursion in directories
-@cindex Descending directories, avoiding
-@cindex Directories, avoiding recursion
-@cindex Recursion in directories, avoiding
-@UNREVISED
+Normally, a pattern matches a name if an initial subsequence of the
+name's components matches the pattern, where @samp{*}, @samp{?}, and
+@samp{[...]} are the usual shell wildcards, @samp{\} escapes wildcards,
+and wildcards can match @samp{/}.
-@FIXME{arrggh! this is still somewhat confusing to me. :-< }
+Other than optionally stripping leading @samp{/} from names
+(@pxref{absolute}), patterns and names are used as-is. For
+example, trailing @samp{/} is not trimmed from a user-specified name
+before deciding whether to exclude it.
-@FIXME{show dan bob's comments, from 2-10-97}
+However, this matching procedure can be altered by the options listed
+below. These options accumulate. For example:
-Usually, @command{tar} will recursively explore all directories (either
-those given on the command line or through the @value{op-files-from}
-option) for the various files they contain. However, you may not always
-want @command{tar} to act this way.
+@smallexample
+--ignore-case --exclude='makefile' --no-ignore-case ---exclude='readme'
+@end smallexample
-The @value{op-no-recursion} option inhibits @command{tar}'s recursive descent
-into specified directories. If you specify @samp{--no-recursion}, you can
-use the @command{find} utility for hunting through levels of directories to
-construct a list of file names which you could then pass to @command{tar}.
-@command{find} allows you to be more selective when choosing which files to
-archive; see @ref{files} for more information on using @command{find} with
-@command{tar}, or look.
+@noindent
+ignores case when excluding @samp{makefile}, but not when excluding
+@samp{readme}.
-@table @kbd
-@item --no-recursion
-Prevents @command{tar} from recursively descending directories.
+@table @option
+@opindex anchored
+@opindex no-anchored
+@item --anchored
+@itemx --no-anchored
+If anchored, a pattern must match an initial subsequence
+of the name's components. Otherwise, the pattern can match any
+subsequence. Default is @option{--no-anchored} for exclusion members
+and @option{--anchored} inclusion members.
+
+@opindex ignore-case
+@opindex no-ignore-case
+@item --ignore-case
+@itemx --no-ignore-case
+When ignoring case, upper-case patterns match lower-case names and vice versa.
+When not ignoring case (the default), matching is case-sensitive.
+
+@opindex wildcards-match-slash
+@opindex no-wildcards-match-slash
+@item --wildcards-match-slash
+@itemx --no-wildcards-match-slash
+When wildcards match slash (the default for exclusion members), a
+wildcard like @samp{*} in the pattern can match a @samp{/} in the
+name. Otherwise, @samp{/} is matched only by @samp{/}.
-@item --recursion
-Requires @command{tar} to recursively descend directories.
-This is the default.
@end table
-When you use @samp{--no-recursion}, @GNUTAR{} grabs
-directory entries themselves, but does not descend on them
-recursively. Many people use @command{find} for locating files they
-want to back up, and since @command{tar} @emph{usually} recursively
-descends on directories, they have to use the @samp{@w{! -d}} option
-to @command{find} @FIXME{needs more explanation or a cite to another
-info file}as they usually do not want all the files in a directory.
-They then use the @value{op-files-from} option to archive the files
-located via @command{find}.
+The @option{--recursion} and @option{--no-recursion} options
+(@pxref{recurse}) also affect how member patterns are interpreted. If
+recursion is in effect, a pattern matches a name if it matches any of
+the name's parent directories.
-The problem when restoring files archived in this manner is that the
-directories themselves are not in the archive; so the
-@value{op-same-permissions} option does not affect them---while users
-might really like it to. Specifying @value{op-no-recursion} is a way to
-tell @command{tar} to grab only the directory entries given to it, adding
-no new files on its own.
+The following table summarizes pattern-matching default values:
-The @value{op-no-recursion} option also applies when extracting: it
-causes @command{tar} to extract only the matched directory entries, not
-the files under those directories.
+@multitable @columnfractions .3 .7
+@headitem Members @tab Default settings
+@item Inclusion @tab @option{--no-wildcards --anchored --no-wildcards-match-slash}
+@item Exclusion @tab @option{--wildcards --no-anchored --wildcards-match-slash}
+@end multitable
-The @value{op-no-recursion} option also affects how exclude patterns
-are interpreted (@pxref{controlling pattern-patching with exclude}).
+@node quoting styles
+@section Quoting Member Names
-The @option{--no-recursion} and @option{--recursion} options apply to
-later options and operands, and can be overridden by later occurrences
-of @option{--no-recursion} and @option{--recursion}. For example:
+When displaying member names, @command{tar} takes care to avoid
+ambiguities caused by certain characters. This is called @dfn{name
+quoting}. The characters in question are:
+
+@itemize @bullet
+@item Non-printable control characters:
+
+@multitable @columnfractions 0.20 0.10 0.60
+@headitem Character @tab ASCII @tab Character name
+@item \a @tab 7 @tab Audible bell
+@item \b @tab 8 @tab Backspace
+@item \f @tab 12 @tab Form feed
+@item \n @tab 10 @tab New line
+@item \r @tab 13 @tab Carriage return
+@item \t @tab 9 @tab Horizontal tabulation
+@item \v @tab 11 @tab Vertical tabulation
+@end multitable
+
+@item Space (ASCII 32)
+
+@item Single and double quotes (@samp{'} and @samp{"})
+
+@item Backslash (@samp{\})
+@end itemize
+
+The exact way @command{tar} uses to quote these characters depends on
+the @dfn{quoting style}. The default quoting style, called
+@dfn{escape} (see below), uses backslash notation to represent control
+characters, space and backslash. Using this quoting style, control
+characters are represented as listed in column @samp{Character} in the
+above table, a space is printed as @samp{\ } and a backslash as @samp{\\}.
+
+@GNUTAR{} offers seven distinct quoting styles, which can be selected
+using @option{--quoting-style} option:
+
+@table @option
+@item --quoting-style=@var{style}
+@opindex quoting-style
+
+Sets quoting style. Valid values for @var{style} argument are:
+literal, shell, shell-always, c, escape, locale, clocale.
+@end table
+
+These styles are described in detail below. To illustrate their
+effect, we will use an imaginary tar archive @file{arch.tar}
+containing the following members:
@smallexample
-$ @kbd{tar -cf jams.tar --norecursion grape --recursion grape/concord}
+@group
+# 1. Contains horizontal tabulation character.
+a tab
+# 2. Contains newline character
+a
+newline
+# 3. Contains a space
+a space
+# 4. Contains double quotes
+a"double"quote
+# 5. Contains single quotes
+a'single'quote
+# 6. Contains a backslash character:
+a\backslash
+@end group
@end smallexample
-@noindent
-creates an archive with one entry for @file{grape}, and the recursive
-contents of @file{grape/concord}, but no entries under @file{grape}
-other than @file{grape/concord}.
+Here is how usual @command{ls} command would have listed them, if they
+had existed in the current working directory:
-@node one
-@section Crossing Filesystem Boundaries
-@cindex File system boundaries, not crossing
-@UNREVISED
+@smallexample
+@group
+$ @kbd{ls}
+a\ttab
+a\nnewline
+a\ space
+a"double"quote
+a'single'quote
+a\\backslash
+@end group
+@end smallexample
-@command{tar} will normally automatically cross file system boundaries in
-order to archive files which are part of a directory tree. You can
-change this behavior by running @command{tar} and specifying
-@value{op-one-file-system}. This option only affects files that are
-archived because they are in a directory that is being archived;
-@command{tar} will still archive files explicitly named on the command line
-or through @value{op-files-from}, regardless of where they reside.
+Quoting styles:
-@table @kbd
-@item --one-file-system
-@itemx -l
-Prevents @command{tar} from crossing file system boundaries when
-archiving. Use in conjunction with any write operation.
-@end table
+@table @samp
+@item literal
+No quoting, display each character as is:
-The @samp{--one-file-system} option causes @command{tar} to modify its
-normal behavior in archiving the contents of directories. If a file in
-a directory is not on the same filesystem as the directory itself, then
-@command{tar} will not archive that file. If the file is a directory
-itself, @command{tar} will not archive anything beneath it; in other words,
-@command{tar} will not cross mount points.
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=literal}
+./
+./a space
+./a'single'quote
+./a"double"quote
+./a\backslash
+./a tab
+./a
+newline
+@end group
+@end smallexample
-It is reported that using this option, the mount point is is archived,
-but nothing under it.
+@item shell
+Display characters the same way Bourne shell does:
+control characters, except @samp{\t} and @samp{\n}, are printed using
+backslash escapes, @samp{\t} and @samp{\n} are printed as is, and a
+single quote is printed as @samp{\'}. If a name contains any quoted
+characters, it is enclosed in single quotes. In particular, if a name
+contains single quotes, it is printed as several single-quoted strings:
-This option is useful for making full or incremental archival backups of
-a file system. If this option is used in conjunction with
-@value{op-verbose}, files that are excluded are mentioned by name on the
-standard error.
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=shell}
+./
+'./a space'
+'./a'\''single'\''quote'
+'./a"double"quote'
+'./a\backslash'
+'./a tab'
+'./a
+newline'
+@end group
+@end smallexample
-@menu
-* directory:: Changing Directory
-* absolute:: Absolute File Names
-@end menu
+@item shell-always
+Same as @samp{shell}, but the names are always enclosed in single
+quotes:
-@node directory
-@subsection Changing the Working Directory
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=shell-always}
+'./'
+'./a space'
+'./a'\''single'\''quote'
+'./a"double"quote'
+'./a\backslash'
+'./a tab'
+'./a
+newline'
+@end group
+@end smallexample
-@FIXME{need to read over this node now for continuity; i've switched
-things around some.}
+@item c
+Use the notation of the C programming language. All names are
+enclosed in double quotes. Control characters are quoted using
+backslash notations, double quotes are represented as @samp{\"},
+backslash characters are represented as @samp{\\}. Single quotes and
+spaces are not quoted:
-@cindex Changing directory mid-stream
-@cindex Directory, changing mid-stream
-@cindex Working directory, specifying
-@UNREVISED
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=c}
+"./"
+"./a space"
+"./a'single'quote"
+"./a\"double\"quote"
+"./a\\backslash"
+"./a\ttab"
+"./a\nnewline"
+@end group
+@end smallexample
-To change the working directory in the middle of a list of file names,
-either on the command line or in a file specified using
-@value{op-files-from}, use @value{op-directory}. This will change the
-working directory to the directory @var{directory} after that point in
-the list.
+@item escape
+Control characters are printed using backslash notation, a space is
+printed as @samp{\ } and a backslash as @samp{\\}. This is the
+default quoting style, unless it was changed when configured the
+package.
-@table @kbd
-@item --directory=@var{directory}
-@itemx -C @var{directory}
-Changes the working directory in the middle of a command line.
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=escape}
+./
+./a space
+./a'single'quote
+./a"double"quote
+./a\\backslash
+./a\ttab
+./a\nnewline
+@end group
+@end smallexample
+
+@item locale
+Control characters, single quote and backslash are printed using
+backslash notation. All names are quoted using left and right
+quotation marks, appropriate to the current locale. If it does not
+define quotation marks, use @samp{`} as left and @samp{'} as right
+quotation marks. Any occurrences of the right quotation mark in a
+name are escaped with @samp{\}, for example:
+
+For example:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=locale}
+`./'
+`./a space'
+`./a\'single\'quote'
+`./a"double"quote'
+`./a\\backslash'
+`./a\ttab'
+`./a\nnewline'
+@end group
+@end smallexample
+
+@item clocale
+Same as @samp{locale}, but @samp{"} is used for both left and right
+quotation marks, if not provided by the currently selected locale:
+
+@smallexample
+@group
+$ @kbd{tar tf arch.tar --quoting-style=clocale}
+"./"
+"./a space"
+"./a'single'quote"
+"./a\"double\"quote"
+"./a\\backslash"
+"./a\ttab"
+"./a\nnewline"
+@end group
+@end smallexample
@end table
-For example,
+You can specify which characters should be quoted in addition to those
+implied by the current quoting style:
+
+@table @option
+@item --quote-chars=@var{string}
+Always quote characters from @var{string}, even if the selected
+quoting style would not quote them.
+@end table
+
+For example, using @samp{escape} quoting (compare with the usual
+escape listing above):
@smallexample
-$ @kbd{tar -c -f jams.tar grape prune -C food cherry}
+@group
+$ @kbd{tar tf arch.tar --quoting-style=escape --quote-chars=' "'}
+./
+./a\ space
+./a'single'quote
+./a\"double\"quote
+./a\\backslash
+./a\ttab
+./a\nnewline
+@end group
@end smallexample
-@noindent
-will place the files @file{grape} and @file{prune} from the current
-directory into the archive @file{jams.tar}, followed by the file
-@file{cherry} from the directory @file{food}. This option is especially
-useful when you have several widely separated files that you want to
-store in the same archive.
+To disable quoting of such additional characters, use the following
+option:
-Note that the file @file{cherry} is recorded in the archive under the
-precise name @file{cherry}, @emph{not} @file{food/cherry}. Thus, the
-archive will contain three files that all appear to have come from the
-same directory; if the archive is extracted with plain @samp{tar
---extract}, all three files will be written in the current directory.
+@table @option
+@item --no-quote-chars=@var{string}
+Remove characters listed in @var{string} from the list of quoted
+characters set by the previous @option{--quote-chars} option.
+@end table
-Contrast this with the command,
+This option is particularly useful if you have added
+@option{--quote-chars} to your @env{TAR_OPTIONS} (@pxref{TAR_OPTIONS})
+and wish to disable it for the current invocation.
+
+Note, that @option{--no-quote-chars} does @emph{not} disable those
+characters that are quoted by default in the selected quoting style.
+
+@node transform
+@section Modifying File and Member Names
+
+@command{Tar} archives contain detailed information about files stored
+in them and full file names are part of that information. When
+storing file to an archive, its file name is recorded in the archive
+along with the actual file contents. When restoring from an archive,
+a file is created on disk with exactly the same name as that stored
+in the archive. In the majority of cases this is the desired behavior
+of a file archiver. However, there are some cases when it is not.
+
+First of all, it is often unsafe to extract archive members with
+absolute file names or those that begin with a @file{../}. @GNUTAR{}
+takes special precautions when extracting such names and provides a
+special option for handling them, which is described in
+@ref{absolute}.
+
+Secondly, you may wish to extract file names without some leading
+directory components, or with otherwise modified names. In other
+cases it is desirable to store files under differing names in the
+archive.
+
+@GNUTAR{} provides two options for these needs.
+
+@table @option
+@opindex strip-components
+@item --strip-components=@var{number}
+Strip given @var{number} of leading components from file names before
+extraction.
+@end table
+
+For example, suppose you have archived whole @file{/usr} hierarchy to
+a tar archive named @file{usr.tar}. Among other files, this archive
+contains @file{usr/include/stdlib.h}, which you wish to extract to
+the current working directory. To do so, you type:
@smallexample
-$ @kbd{tar -c -f jams.tar grape prune -C food red/cherry}
+$ @kbd{tar -xf usr.tar --strip=2 usr/include/stdlib.h}
@end smallexample
+The option @option{--strip=2} instructs @command{tar} to strip the
+two leading components (@file{usr/} and @file{include/}) off the file
+name.
+
+If you add to the above invocation @option{--verbose} (@option{-v})
+option, you will note that the verbose listing still contains the
+full file name, with the two removed components still in place. This
+can be inconvenient, so @command{tar} provides a special option for
+altering this behavior:
+
+@anchor{show-transformed-names}
+@table @option
+@opindex show-transformed-names
+@item --show-transformed-names
+Display file or member names with all requested transformations
+applied.
+@end table
+
@noindent
-which records the third file in the archive under the name
-@file{red/cherry} so that, if the archive is extracted using
-@samp{tar --extract}, the third file will be written in a subdirectory
-named @file{orange-colored}.
+For example:
-You can use the @samp{--directory} option to make the archive
-independent of the original name of the directory holding the files.
-The following command places the files @file{/etc/passwd},
-@file{/etc/hosts}, and @file{/lib/libc.a} into the archive
-@file{foo.tar}:
+@smallexample
+@group
+$ @kbd{tar -xf usr.tar -v --strip=2 usr/include/stdlib.h}
+usr/include/stdlib.h
+$ @kbd{tar -xf usr.tar -v --strip=2 --show-transformed usr/include/stdlib.h}
+stdlib.h
+@end group
+@end smallexample
+
+Notice that in both cases the file is @file{stdlib.h} extracted to the
+current working directory, @option{--show-transformed-names} affects
+only the way its name is displayed.
+
+This option is especially useful for verifying whether the invocation
+will have the desired effect. Thus, before running
@smallexample
-$ @kbd{tar -c -f foo.tar -C /etc passwd hosts -C /lib libc.a}
+$ @kbd{tar -x --strip=@var{n}}
@end smallexample
@noindent
-However, the names of the archive members will be exactly what they were
-on the command line: @file{passwd}, @file{hosts}, and @file{libc.a}.
-They will not appear to be related by file name to the original
-directories where those files were located.
-
-Note that @samp{--directory} options are interpreted consecutively. If
-@samp{--directory} specifies a relative file name, it is interpreted
-relative to the then current directory, which might not be the same as
-the original current working directory of @command{tar}, due to a previous
-@samp{--directory} option.
+it is often advisable to run
-@FIXME{dan: does this mean that you *can* use the short option form, but
-you can *not* use the long option form with --files-from? or is this
-totally screwed?}
+@smallexample
+$ @kbd{tar -t -v --show-transformed --strip=@var{n}}
+@end smallexample
-When using @samp{--files-from} (@pxref{files}), you can put @samp{-C}
-options in the file list. Unfortunately, you cannot put
-@samp{--directory} options in the file list. (This interpretation can
-be disabled by using the @value{op-null} option.)
+@noindent
+to make sure the command will produce the intended results.
-@node absolute
-@subsection Absolute File Names
-@UNREVISED
+In case you need to apply more complex modifications to the file name,
+@GNUTAR{} provides a general-purpose transformation option:
-@table @kbd
-@item -P
-@itemx --absolute-names
-Do not strip leading slashes from file names, and permit file names
-containing a @file{..} file name component.
+@table @option
+@opindex transform
+@item --transform=@var{expression}
+Modify file names using supplied @var{expression}.
@end table
-By default, @GNUTAR{} drops a leading @samp{/} on
-input or output, and complains about file names containing a @file{..}
-component. This option turns off this behavior.
+@noindent
+The @var{expression} is a @command{sed}-like replace expression of the
+form:
-When @command{tar} extracts archive members from an archive, it strips any
-leading slashes (@samp{/}) from the member name. This causes absolute
-member names in the archive to be treated as relative file names. This
-allows you to have such members extracted wherever you want, instead of
-being restricted to extracting the member in the exact directory named
-in the archive. For example, if the archive member has the name
-@file{/etc/passwd}, @command{tar} will extract it as if the name were
-really @file{etc/passwd}.
+@smallexample
+s/@var{regexp}/@var{replace}/[@var{flags}]
+@end smallexample
-File names containing @file{..} can cause problems when extracting, so
-@command{tar} normally warns you about such files when creating an
-archive, and rejects attempts to extracts such files.
+@noindent
+where @var{regexp} is a @dfn{regular expression}, @var{replace} is a
+replacement for each file name part that matches @var{regexp}. Both
+@var{regexp} and @var{replace} are described in detail in
+@ref{The "s" Command, The "s" Command, The `s' Command, sed, GNU sed}.
-Other @command{tar} programs do not do this. As a result, if you
-create an archive whose member names start with a slash, they will be
-difficult for other people with a non-@GNUTAR{}
-program to use. Therefore, @GNUTAR{} also strips
-leading slashes from member names when putting members into the
-archive. For example, if you ask @command{tar} to add the file
-@file{/bin/ls} to an archive, it will do so, but the member name will
-be @file{bin/ls}.
+Supported @var{flags} are:
-If you use the @value{op-absolute-names} option, @command{tar} will do
-none of these transformations.
+@table @samp
+@item g
+Apply the replacement to @emph{all} matches to the @var{regexp}, not
+just the first.
-To archive or extract files relative to the root directory, specify
-the @value{op-absolute-names} option.
+@item i
+Use case-insensitive matching
-Normally, @command{tar} acts on files relative to the working
-directory---ignoring superior directory names when archiving, and
-ignoring leading slashes when extracting.
+@item x
+@var{regexp} is an @dfn{extended regular expression} (@pxref{Extended
+regexps, Extended regular expressions, Extended regular expressions,
+sed, GNU sed}).
-When you specify @value{op-absolute-names}, @command{tar} stores file names
-including all superior directory names, and preserves leading slashes.
-If you only invoked @command{tar} from the root directory you would never
-need the @value{op-absolute-names} option, but using this option may be
-more convenient than switching to root.
+@item @var{number}
+Only replace the @var{number}th match of the @var{regexp}.
-@FIXME{Should be an example in the tutorial/wizardry section using this
-to transfer files between systems.}
+Note: the @var{posix} standard does not specify what should happen
+when you mix the @samp{g} and @var{number} modifiers. @GNUTAR{}
+follows the GNU @command{sed} implementation in this regard, so
+the interaction is defined to be: ignore matches before the
+@var{number}th, and then match and replace all matches from the
+@var{number}th on.
-@FIXME{Is write access an issue?}
+@end table
-@table @kbd
+Any delimiter can be used in lieue of @samp{/}, the only requirement being
+that it be used consistently throughout the expression. For example,
+the following two expressions are equivalent:
+
+@smallexample
+@group
+s/one/two/
+s,one,two,
+@end group
+@end smallexample
+
+Changing delimiters is often useful when the @var{regex} contains
+slashes. For example, it is more convenient to write @code{s,/,-,} than
+@code{s/\//-/}.
+
+Here are several examples of @option{--transform} usage:
+
+@enumerate
+@item Extract @file{usr/} hierarchy into @file{usr/local/}:
+
+@smallexample
+$ @kbd{tar --transform='s,usr/,usr/local/,' -x -f arch.tar}
+@end smallexample
+
+@item Strip two leading directory components (equivalent to
+@option{--strip-components=2}):
+
+@smallexample
+$ @kbd{tar --transform='s,/*[^/]*/[^/]*/,,' -x -f arch.tar}
+@end smallexample
+
+@item Prepend @file{/prefix/} to each file name:
+
+@smallexample
+$ @kbd{tar --transform 's,^,/prefix/,' -x -f arch.tar}
+@end smallexample
+
+@item Convert each file name to lower case:
+
+@smallexample
+$ @kbd{tar --transform 's/.*/\L&/' -x -f arch.tar}
+@end smallexample
+
+@end enumerate
+
+Unlike @option{--strip-components}, @option{--transform} can be used
+in any @GNUTAR{} operation mode. For example, the following command
+adds files to the archive while replacing the leading @file{usr/}
+component with @file{var/}:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,^usr/,var/,' /}
+@end smallexample
+
+To test @option{--transform} effect we suggest using
+@option{--show-transformed-names} option:
+
+@smallexample
+$ @kbd{tar -cf arch.tar --transform='s,^usr/,var/,' \
+ --verbose --show-transformed-names /}
+@end smallexample
+
+If both @option{--strip-components} and @option{--transform} are used
+together, then @option{--transform} is applied first, and the required
+number of components is then stripped from its result.
+
+@node after
+@section Operating Only on New Files
+@UNREVISED
+
+@cindex Excluding file by age
+@cindex Data Modification time, excluding files by
+@cindex Modification time, excluding files by
+@cindex Age, excluding files by
+The @option{--after-date=@var{date}} (@option{--newer=@var{date}},
+@option{-N @var{date}}) option causes @command{tar} to only work on
+files whose data modification or status change times are newer than
+the @var{date} given. If @var{date} starts with @samp{/} or @samp{.},
+it is taken to be a file name; the data modification time of that file
+is used as the date. If you use this option when creating or appending
+to an archive, the archive will only include new files. If you use
+@option{--after-date} when extracting an archive, @command{tar} will
+only extract files newer than the @var{date} you specify.
+
+If you only want @command{tar} to make the date comparison based on
+modification of the file's data (rather than status
+changes), then use the @option{--newer-mtime=@var{date}} option.
+
+You may use these options with any operation. Note that these options
+differ from the @option{--update} (@option{-u}) operation in that they
+allow you to specify a particular date against which @command{tar} can
+compare when deciding whether or not to archive the files.
+
+@table @option
+@opindex after-date
+@opindex newer
+@item --after-date=@var{date}
+@itemx --newer=@var{date}
+@itemx -N @var{date}
+Only store files newer than @var{date}.
+
+Acts on files only if their data modification or status change times are
+later than @var{date}. Use in conjunction with any operation.
+
+If @var{date} starts with @samp{/} or @samp{.}, it is taken to be a file
+name; the data modification time of that file is used as the date.
+
+@opindex newer-mtime
+@item --newer-mtime=@var{date}
+Acts like @option{--after-date}, but only looks at data modification times.
+@end table
+
+These options limit @command{tar} to operate only on files which have
+been modified after the date specified. A file's status is considered to have
+changed if its contents have been modified, or if its owner,
+permissions, and so forth, have been changed. (For more information on
+how to specify a date, see @ref{Date input formats}; remember that the
+entire date argument must be quoted if it contains any spaces.)
+
+Gurus would say that @option{--after-date} tests both the data
+modification time (@code{mtime}, the time the contents of the file
+were last modified) and the status change time (@code{ctime}, the time
+the file's status was last changed: owner, permissions, etc.@:)
+fields, while @option{--newer-mtime} tests only the @code{mtime}
+field.
+
+To be precise, @option{--after-date} checks @emph{both} @code{mtime} and
+@code{ctime} and processes the file if either one is more recent than
+@var{date}, while @option{--newer-mtime} only checks @code{mtime} and
+disregards @code{ctime}. Neither does it use @code{atime} (the last time the
+contents of the file were looked at).
+
+Date specifiers can have embedded spaces. Because of this, you may need
+to quote date arguments to keep the shell from parsing them as separate
+arguments. For example, the following command will add to the archive
+all the files modified less than two days ago:
+
+@smallexample
+$ @kbd{tar -cf foo.tar --newer-mtime '2 days ago'}
+@end smallexample
+
+When any of these options is used with the option @option{--verbose}
+(@pxref{verbose tutorial}) @GNUTAR{} will try to convert the specified
+date back to its textual representation and compare that with the
+one given with the option. If the two dates differ, @command{tar} will
+print a warning saying what date it will use. This is to help user
+ensure he is using the right date. For example:
+
+@smallexample
+@group
+$ @kbd{tar -c -f archive.tar --after-date='10 days ago' .}
+tar: Option --after-date: Treating date `10 days ago' as 2006-06-11
+13:19:37.232434
+@end group
+@end smallexample
+
+@quotation
+@strong{Please Note:} @option{--after-date} and @option{--newer-mtime}
+should not be used for incremental backups. @xref{Incremental Dumps},
+for proper way of creating incremental backups.
+@end quotation
+
+@node recurse
+@section Descending into Directories
+@UNREVISED
+@cindex Avoiding recursion in directories
+@cindex Descending directories, avoiding
+@cindex Directories, avoiding recursion
+@cindex Recursion in directories, avoiding
+
+@FIXME{arrggh! this is still somewhat confusing to me. :-< }
+
+Usually, @command{tar} will recursively explore all directories (either
+those given on the command line or through the @option{--files-from}
+option) for the various files they contain. However, you may not always
+want @command{tar} to act this way.
+
+@opindex no-recursion
+The @option{--no-recursion} option inhibits @command{tar}'s recursive descent
+into specified directories. If you specify @option{--no-recursion}, you can
+use the @command{find} utility for hunting through levels of directories to
+construct a list of file names which you could then pass to @command{tar}.
+@command{find} allows you to be more selective when choosing which files to
+archive; see @ref{files}, for more information on using @command{find} with
+@command{tar}, or look.
+
+@table @option
+@item --no-recursion
+Prevents @command{tar} from recursively descending directories.
+
+@opindex recursion
+@item --recursion
+Requires @command{tar} to recursively descend directories.
+This is the default.
+@end table
+
+When you use @option{--no-recursion}, @GNUTAR{} grabs
+directory entries themselves, but does not descend on them
+recursively. Many people use @command{find} for locating files they
+want to back up, and since @command{tar} @emph{usually} recursively
+descends on directories, they have to use the @samp{@w{-not -type d}}
+test in their @command{find} invocation (@pxref{Type, Type, Type test,
+find, Finding Files}), as they usually do not want all the files in a
+directory. They then use the @option{--files-from} option to archive
+the files located via @command{find}.
+
+The problem when restoring files archived in this manner is that the
+directories themselves are not in the archive; so the
+@option{--same-permissions} (@option{--preserve-permissions},
+@option{-p}) option does not affect them---while users might really
+like it to. Specifying @option{--no-recursion} is a way to tell
+@command{tar} to grab only the directory entries given to it, adding
+no new files on its own. To summarize, if you use @command{find} to
+create a list of files to be stored in an archive, use it as follows:
+
+@smallexample
+@group
+$ @kbd{find @var{dir} @var{tests} | \
+ tar -cf @var{archive} -T - --no-recursion}
+@end group
+@end smallexample
+
+The @option{--no-recursion} option also applies when extracting: it
+causes @command{tar} to extract only the matched directory entries, not
+the files under those directories.
+
+The @option{--no-recursion} option also affects how globbing patterns
+are interpreted (@pxref{controlling pattern-matching}).
+
+The @option{--no-recursion} and @option{--recursion} options apply to
+later options and operands, and can be overridden by later occurrences
+of @option{--no-recursion} and @option{--recursion}. For example:
+
+@smallexample
+$ @kbd{tar -cf jams.tar --no-recursion grape --recursion grape/concord}
+@end smallexample
+
+@noindent
+creates an archive with one entry for @file{grape}, and the recursive
+contents of @file{grape/concord}, but no entries under @file{grape}
+other than @file{grape/concord}.
+
+@node one
+@section Crossing File System Boundaries
+@cindex File system boundaries, not crossing
+@UNREVISED
+
+@command{tar} will normally automatically cross file system boundaries in
+order to archive files which are part of a directory tree. You can
+change this behavior by running @command{tar} and specifying
+@option{--one-file-system}. This option only affects files that are
+archived because they are in a directory that is being archived;
+@command{tar} will still archive files explicitly named on the command line
+or through @option{--files-from}, regardless of where they reside.
+
+@table @option
+@opindex one-file-system
+@item --one-file-system
+Prevents @command{tar} from crossing file system boundaries when
+archiving. Use in conjunction with any write operation.
+@end table
+
+The @option{--one-file-system} option causes @command{tar} to modify its
+normal behavior in archiving the contents of directories. If a file in
+a directory is not on the same file system as the directory itself, then
+@command{tar} will not archive that file. If the file is a directory
+itself, @command{tar} will not archive anything beneath it; in other words,
+@command{tar} will not cross mount points.
+
+This option is useful for making full or incremental archival backups of
+a file system. If this option is used in conjunction with
+@option{--verbose} (@option{-v}), files that are excluded are
+mentioned by name on the standard error.
+
+@menu
+* directory:: Changing Directory
+* absolute:: Absolute File Names
+@end menu
+
+@node directory
+@subsection Changing the Working Directory
+
+@FIXME{need to read over this node now for continuity; i've switched
+things around some.}
+
+@cindex Changing directory mid-stream
+@cindex Directory, changing mid-stream
+@cindex Working directory, specifying
+To change the working directory in the middle of a list of file names,
+either on the command line or in a file specified using
+@option{--files-from} (@option{-T}), use @option{--directory} (@option{-C}).
+This will change the working directory to the specified directory
+after that point in the list.
+
+@table @option
+@opindex directory
+@item --directory=@var{directory}
+@itemx -C @var{directory}
+Changes the working directory in the middle of a command line.
+@end table
+
+For example,
+
+@smallexample
+$ @kbd{tar -c -f jams.tar grape prune -C food cherry}
+@end smallexample
+
+@noindent
+will place the files @file{grape} and @file{prune} from the current
+directory into the archive @file{jams.tar}, followed by the file
+@file{cherry} from the directory @file{food}. This option is especially
+useful when you have several widely separated files that you want to
+store in the same archive.
+
+Note that the file @file{cherry} is recorded in the archive under the
+precise name @file{cherry}, @emph{not} @file{food/cherry}. Thus, the
+archive will contain three files that all appear to have come from the
+same directory; if the archive is extracted with plain @samp{tar
+--extract}, all three files will be written in the current directory.
+
+Contrast this with the command,
+
+@smallexample
+$ @kbd{tar -c -f jams.tar grape prune -C food red/cherry}
+@end smallexample
+
+@noindent
+which records the third file in the archive under the name
+@file{red/cherry} so that, if the archive is extracted using
+@samp{tar --extract}, the third file will be written in a subdirectory
+named @file{orange-colored}.
+
+You can use the @option{--directory} option to make the archive
+independent of the original name of the directory holding the files.
+The following command places the files @file{/etc/passwd},
+@file{/etc/hosts}, and @file{/lib/libc.a} into the archive
+@file{foo.tar}:
+
+@smallexample
+$ @kbd{tar -c -f foo.tar -C /etc passwd hosts -C /lib libc.a}
+@end smallexample
+
+@noindent
+However, the names of the archive members will be exactly what they were
+on the command line: @file{passwd}, @file{hosts}, and @file{libc.a}.
+They will not appear to be related by file name to the original
+directories where those files were located.
+
+Note that @option{--directory} options are interpreted consecutively. If
+@option{--directory} specifies a relative file name, it is interpreted
+relative to the then current directory, which might not be the same as
+the original current working directory of @command{tar}, due to a previous
+@option{--directory} option.
+
+When using @option{--files-from} (@pxref{files}), you can put various
+@command{tar} options (including @option{-C}) in the file list. Notice,
+however, that in this case the option and its argument may not be
+separated by whitespace. If you use short option, its argument must
+either follow the option letter immediately, without any intervening
+whitespace, or occupy the next line. Otherwise, if you use long
+option, separate its argument by an equal sign.
+
+For instance, the file list for the above example will be:
+
+@smallexample
+@group
+-C/etc
+passwd
+hosts
+--directory=/lib
+libc.a
+@end group
+@end smallexample
+
+@noindent
+To use it, you would invoke @command{tar} as follows:
+
+@smallexample
+$ @kbd{tar -c -f foo.tar --files-from list}
+@end smallexample
+
+The interpretation of @option{--directory} is disabled by
+@option{--null} option.
+
+@node absolute
+@subsection Absolute File Names
+@UNREVISED
+
+@table @option
+@opindex absolute-names
+@item --absolute-names
+@itemx -P
+Do not strip leading slashes from file names, and permit file names
+containing a @file{..} file name component.
+@end table
+
+By default, @GNUTAR{} drops a leading @samp{/} on
+input or output, and complains about file names containing a @file{..}
+component. This option turns off this behavior.
+
+When @command{tar} extracts archive members from an archive, it strips any
+leading slashes (@samp{/}) from the member name. This causes absolute
+member names in the archive to be treated as relative file names. This
+allows you to have such members extracted wherever you want, instead of
+being restricted to extracting the member in the exact directory named
+in the archive. For example, if the archive member has the name
+@file{/etc/passwd}, @command{tar} will extract it as if the name were
+really @file{etc/passwd}.
+
+File names containing @file{..} can cause problems when extracting, so
+@command{tar} normally warns you about such files when creating an
+archive, and rejects attempts to extracts such files.
+
+Other @command{tar} programs do not do this. As a result, if you
+create an archive whose member names start with a slash, they will be
+difficult for other people with a non-@GNUTAR{}
+program to use. Therefore, @GNUTAR{} also strips
+leading slashes from member names when putting members into the
+archive. For example, if you ask @command{tar} to add the file
+@file{/bin/ls} to an archive, it will do so, but the member name will
+be @file{bin/ls}.@footnote{A side effect of this is that when
+@option{--create} is used with @option{--verbose} the resulting output
+is not, generally speaking, the same as the one you'd get running
+@kbd{tar --list} command. This may be important if you use some
+scripts for comparing both outputs. @xref{listing member and file names},
+for the information on how to handle this case.}
+
+If you use the @option{--absolute-names} (@option{-P}) option,
+@command{tar} will do none of these transformations.
+
+To archive or extract files relative to the root directory, specify
+the @option{--absolute-names} (@option{-P}) option.
+
+Normally, @command{tar} acts on files relative to the working
+directory---ignoring superior directory names when archiving, and
+ignoring leading slashes when extracting.
+
+When you specify @option{--absolute-names} (@option{-P}),
+@command{tar} stores file names including all superior directory
+names, and preserves leading slashes. If you only invoked
+@command{tar} from the root directory you would never need the
+@option{--absolute-names} option, but using this option
+may be more convenient than switching to root.
+
+@FIXME{Should be an example in the tutorial/wizardry section using this
+to transfer files between systems.}
+
+@FIXME{Is write access an issue?}
+
+@table @option
@item --absolute-names
Preserves full file names (including superior directory names) when
archiving files. Preserves leading slash when extracting files.
-@end table
+@end table
+
+@FIXME{this is still horrible; need to talk with dan on monday.}
+
+@command{tar} prints out a message about removing the @samp{/} from
+file names. This message appears once per @GNUTAR{}
+invocation. It represents something which ought to be told; ignoring
+what it means can cause very serious surprises, later.
+
+Some people, nevertheless, do not want to see this message. Wanting to
+play really dangerously, one may of course redirect @command{tar} standard
+error to the sink. For example, under @command{sh}:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar /home 2> /dev/null}
+@end smallexample
+
+@noindent
+Another solution, both nicer and simpler, would be to change to
+the @file{/} directory first, and then avoid absolute notation.
+For example:
+
+@smallexample
+$ @kbd{(cd / && tar -c -f archive.tar home)}
+# @i{or}:
+$ @kbd{tar -c -f archive.tar -C / home}
+@end smallexample
+
+@include getdate.texi
+
+@node Formats
+@chapter Controlling the Archive Format
+
+@cindex Tar archive formats
+Due to historical reasons, there are several formats of tar archives.
+All of them are based on the same principles, but have some subtle
+differences that often make them incompatible with each other.
+
+GNU tar is able to create and handle archives in a variety of formats.
+The most frequently used formats are (in alphabetical order):
+
+@table @asis
+@item gnu
+Format used by @GNUTAR{} versions up to 1.13.25. This format derived
+from an early @acronym{POSIX} standard, adding some improvements such as
+sparse file handling and incremental archives. Unfortunately these
+features were implemented in a way incompatible with other archive
+formats.
+
+Archives in @samp{gnu} format are able to hold pathnames of unlimited
+length.
+
+@item oldgnu
+Format used by @GNUTAR{} of versions prior to 1.12.
+
+@item v7
+Archive format, compatible with the V7 implementation of tar. This
+format imposes a number of limitations. The most important of them
+are:
+
+@enumerate
+@item The maximum length of a file name is limited to 99 characters.
+@item The maximum length of a symbolic link is limited to 99 characters.
+@item It is impossible to store special files (block and character
+devices, fifos etc.)
+@item Maximum value of user or group ID is limited to 2097151 (7777777
+octal)
+@item V7 archives do not contain symbolic ownership information (user
+and group name of the file owner).
+@end enumerate
+
+This format has traditionally been used by Automake when producing
+Makefiles. This practice will change in the future, in the meantime,
+however this means that projects containing filenames more than 99
+characters long will not be able to use @GNUTAR{} @value{VERSION} and
+Automake prior to 1.9.
+
+@item ustar
+Archive format defined by @acronym{POSIX.1-1988} specification. It stores
+symbolic ownership information. It is also able to store
+special files. However, it imposes several restrictions as well:
+
+@enumerate
+@item The maximum length of a file name is limited to 256 characters,
+provided that the filename can be split at directory separator in
+two parts, first of them being at most 155 bytes long. So, in most
+cases the maximum file name length will be shorter than 256
+characters.
+@item The maximum length of a symbolic link name is limited to
+100 characters.
+@item Maximum size of a file the archive is able to accommodate
+is 8GB
+@item Maximum value of UID/GID is 2097151.
+@item Maximum number of bits in device major and minor numbers is 21.
+@end enumerate
+
+@item star
+Format used by J@"org Schilling @command{star}
+implementation. @GNUTAR{} is able to read @samp{star} archives but
+currently does not produce them.
+
+@item posix
+Archive format defined by @acronym{POSIX.1-2001} specification. This is the
+most flexible and feature-rich format. It does not impose any
+restrictions on file sizes or filename lengths. This format is quite
+recent, so not all tar implementations are able to handle it properly.
+However, this format is designed in such a way that any tar
+implementation able to read @samp{ustar} archives will be able to read
+most @samp{posix} archives as well, with the only exception that any
+additional information (such as long file names etc.) will in such
+case be extracted as plain text files along with the files it refers to.
+
+This archive format will be the default format for future versions
+of @GNUTAR{}.
+
+@end table
+
+The following table summarizes the limitations of each of these
+formats:
+
+@multitable @columnfractions .10 .20 .20 .20 .20
+@headitem Format @tab UID @tab File Size @tab Path Name @tab Devn
+@item gnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
+@item oldgnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
+@item v7 @tab 2097151 @tab 8GB @tab 99 @tab n/a
+@item ustar @tab 2097151 @tab 8GB @tab 256 @tab 21
+@item posix @tab Unlimited @tab Unlimited @tab Unlimited @tab Unlimited
+@end multitable
+
+The default format for @GNUTAR{} is defined at compilation
+time. You may check it by running @command{tar --help}, and examining
+the last lines of its output. Usually, @GNUTAR{} is configured
+to create archives in @samp{gnu} format, however, future version will
+switch to @samp{posix}.
+
+@menu
+* Compression:: Using Less Space through Compression
+* Attributes:: Handling File Attributes
+* Portability:: Making @command{tar} Archives More Portable
+* cpio:: Comparison of @command{tar} and @command{cpio}
+@end menu
+
+@node Compression
+@section Using Less Space through Compression
+
+@menu
+* gzip:: Creating and Reading Compressed Archives
+* sparse:: Archiving Sparse Files
+@end menu
+
+@node gzip
+@subsection Creating and Reading Compressed Archives
+@cindex Compressed archives
+@cindex Storing archives in compressed format
+
+@GNUTAR{} is able to create and read compressed archives. It supports
+@command{gzip} and @command{bzip2} compression programs. For backward
+compatibility, it also supports @command{compress} command, although
+we strongly recommend against using it, since there is a patent
+covering the algorithm it uses and you could be sued for patent
+infringement merely by running @command{compress}! Besides, it is less
+effective than @command{gzip} and @command{bzip2}.
+
+Creating a compressed archive is simple: you just specify a
+@dfn{compression option} along with the usual archive creation
+commands. The compression option is @option{-z} (@option{--gzip}) to
+create a @command{gzip} compressed archive, @option{-j}
+(@option{--bzip2}) to create a @command{bzip2} compressed archive, and
+@option{-Z} (@option{--compress}) to use @command{compress} program.
+For example:
+
+@smallexample
+$ @kbd{tar cfz archive.tar.gz .}
+@end smallexample
+
+Reading compressed archive is even simpler: you don't need to specify
+any additional options as @GNUTAR{} recognizes its format
+automatically. Thus, the following commands will list and extract the
+archive created in previous example:
+
+@smallexample
+# List the compressed archive
+$ @kbd{tar tf archive.tar.gz}
+# Extract the compressed archive
+$ @kbd{tar xf archive.tar.gz}
+@end smallexample
+
+The only case when you have to specify a decompression option while
+reading the archive is when reading from a pipe or from a tape drive
+that does not support random access. However, in this case @GNUTAR{}
+will indicate which option you should use. For example:
+
+@smallexample
+$ @kbd{cat archive.tar.gz | tar tf -}
+tar: Archive is compressed. Use -z option
+tar: Error is not recoverable: exiting now
+@end smallexample
+
+If you see such diagnostics, just add the suggested option to the
+invocation of @GNUTAR{}:
+
+@smallexample
+$ @kbd{cat archive.tar.gz | tar tfz -}
+@end smallexample
+
+Notice also, that there are several restrictions on operations on
+compressed archives. First of all, compressed archives cannot be
+modified, i.e., you cannot update (@option{--update} (@option{-u})) them or delete
+(@option{--delete}) members from them. Likewise, you cannot append
+another @command{tar} archive to a compressed archive using
+@option{--append} (@option{-r})). Secondly, multi-volume archives cannot be
+compressed.
+
+The following table summarizes compression options used by @GNUTAR{}.
+
+@table @option
+@opindex gzip
+@opindex ungzip
+@item -z
+@itemx --gzip
+@itemx --ungzip
+Filter the archive through @command{gzip}.
+
+You can use @option{--gzip} and @option{--gunzip} on physical devices
+(tape drives, etc.) and remote files as well as on normal files; data
+to or from such devices or remote files is reblocked by another copy
+of the @command{tar} program to enforce the specified (or default) record
+size. The default compression parameters are used; if you need to
+override them, set @env{GZIP} environment variable, e.g.:
+
+@smallexample
+$ @kbd{GZIP=--best tar cfz archive.tar.gz subdir}
+@end smallexample
+
+@noindent
+Another way would be to avoid the @option{--gzip} (@option{--gunzip}, @option{--ungzip}, @option{-z}) option and run
+@command{gzip} explicitly:
+
+@smallexample
+$ @kbd{tar cf - subdir | gzip --best -c - > archive.tar.gz}
+@end smallexample
+
+@cindex corrupted archives
+About corrupted compressed archives: @command{gzip}'ed files have no
+redundancy, for maximum compression. The adaptive nature of the
+compression scheme means that the compression tables are implicitly
+spread all over the archive. If you lose a few blocks, the dynamic
+construction of the compression tables becomes unsynchronized, and there
+is little chance that you could recover later in the archive.
+
+There are pending suggestions for having a per-volume or per-file
+compression in @GNUTAR{}. This would allow for viewing the
+contents without decompression, and for resynchronizing decompression at
+every volume or file, in case of corrupted archives. Doing so, we might
+lose some compressibility. But this would have make recovering easier.
+So, there are pros and cons. We'll see!
+
+@opindex bzip2
+@item -j
+@itemx --bzip2
+Filter the archive through @code{bzip2}. Otherwise like @option{--gzip}.
+
+@opindex compress
+@opindex uncompress
+@item -Z
+@itemx --compress
+@itemx --uncompress
+Filter the archive through @command{compress}. Otherwise like @option{--gzip}.
+
+The @acronym{GNU} Project recommends you not use
+@command{compress}, because there is a patent covering the algorithm it
+uses. You could be sued for patent infringement merely by running
+@command{compress}.
+
+@opindex use-compress-program
+@item --use-compress-program=@var{prog}
+Use external compression program @var{prog}. Use this option if you
+have a compression program that @GNUTAR{} does not support. There
+are two requirements to which @var{prog} should comply:
+
+First, when called without options, it should read data from standard
+input, compress it and output it on standard output.
+
+Secondly, if called with @option{-d} argument, it should do exactly
+the opposite, i.e., read the compressed data from the standard input
+and produce uncompressed data on the standard output.
+@end table
+
+@cindex gpg, using with tar
+@cindex gnupg, using with tar
+@cindex Using encrypted archives
+The @option{--use-compress-program} option, in particular, lets you
+implement your own filters, not necessarily dealing with
+compression/decompression. For example, suppose you wish to implement
+PGP encryption on top of compression, using @command{gpg} (@pxref{Top,
+gpg, gpg ---- encryption and signing tool, gpg, GNU Privacy Guard
+Manual}). The following script does that:
+
+@smallexample
+@group
+#! /bin/sh
+case $1 in
+-d) gpg --decrypt - | gzip -d -c;;
+'') gzip -c | gpg -s ;;
+*) echo "Unknown option $1">&2; exit 1;;
+esac
+@end group
+@end smallexample
+
+Suppose you name it @file{gpgz} and save it somewhere in your
+@env{PATH}. Then the following command will create a compressed
+archive signed with your private key:
+
+@smallexample
+$ @kbd{tar -cf foo.tar.gpgz --use-compress=gpgz .}
+@end smallexample
+
+@noindent
+Likewise, the following command will list its contents:
+
+@smallexample
+$ @kbd{tar -tf foo.tar.gpgz --use-compress=gpgz .}
+@end smallexample
+
+@ignore
+The above is based on the following discussion:
+
+ I have one question, or maybe it's a suggestion if there isn't a way
+ to do it now. I would like to use @option{--gzip}, but I'd also like
+ the output to be fed through a program like @acronym{GNU}
+ @command{ecc} (actually, right now that's @samp{exactly} what I'd like
+ to use :-)), basically adding ECC protection on top of compression.
+ It seems as if this should be quite easy to do, but I can't work out
+ exactly how to go about it. Of course, I can pipe the standard output
+ of @command{tar} through @command{ecc}, but then I lose (though I
+ haven't started using it yet, I confess) the ability to have
+ @command{tar} use @command{rmt} for it's I/O (I think).
+
+ I think the most straightforward thing would be to let me specify a
+ general set of filters outboard of compression (preferably ordered,
+ so the order can be automatically reversed on input operations, and
+ with the options they require specifiable), but beggars shouldn't be
+ choosers and anything you decide on would be fine with me.
+
+ By the way, I like @command{ecc} but if (as the comments say) it can't
+ deal with loss of block sync, I'm tempted to throw some time at adding
+ that capability. Supposing I were to actually do such a thing and
+ get it (apparently) working, do you accept contributed changes to
+ utilities like that? (Leigh Clayton @file{loc@@soliton.com}, May 1995).
+
+ Isn't that exactly the role of the
+ @option{--use-compress-prog=@var{program}} option?
+ I never tried it myself, but I suspect you may want to write a
+ @var{prog} script or program able to filter stdin to stdout to
+ way you want. It should recognize the @option{-d} option, for when
+ extraction is needed rather than creation.
+
+ It has been reported that if one writes compressed data (through the
+ @option{--gzip} or @option{--compress} options) to a DLT and tries to use
+ the DLT compression mode, the data will actually get bigger and one will
+ end up with less space on the tape.
+@end ignore
+
+@node sparse
+@subsection Archiving Sparse Files
+@cindex Sparse Files
+
+Files in the file system occasionally have @dfn{holes}. A @dfn{hole}
+in a file is a section of the file's contents which was never written.
+The contents of a hole reads as all zeros. On many operating systems,
+actual disk storage is not allocated for holes, but they are counted
+in the length of the file. If you archive such a file, @command{tar}
+could create an archive longer than the original. To have @command{tar}
+attempt to recognize the holes in a file, use @option{--sparse}
+(@option{-S}). When you use this option, then, for any file using
+less disk space than would be expected from its length, @command{tar}
+searches the file for consecutive stretches of zeros. It then records
+in the archive for the file where the consecutive stretches of zeros
+are, and only archives the ``real contents'' of the file. On
+extraction (using @option{--sparse} is not needed on extraction) any
+such files have holes created wherever the continuous stretches of zeros
+were found. Thus, if you use @option{--sparse}, @command{tar} archives
+won't take more space than the original.
+
+@table @option
+@opindex sparse
+@item -S
+@itemx --sparse
+This option instructs @command{tar} to test each file for sparseness
+before attempting to archive it. If the file is found to be sparse it
+is treated specially, thus allowing to decrease the amount of space
+used by its image in the archive.
+
+This option is meaningful only when creating or updating archives. It
+has no effect on extraction.
+@end table
+
+Consider using @option{--sparse} when performing file system backups,
+to avoid archiving the expanded forms of files stored sparsely in the
+system.
+
+Even if your system has no sparse files currently, some may be
+created in the future. If you use @option{--sparse} while making file
+system backups as a matter of course, you can be assured the archive
+will never take more space on the media than the files take on disk
+(otherwise, archiving a disk filled with sparse files might take
+hundreds of tapes). @xref{Incremental Dumps}.
+
+However, be aware that @option{--sparse} option presents a serious
+drawback. Namely, in order to determine if the file is sparse
+@command{tar} has to read it before trying to archive it, so in total
+the file is read @strong{twice}. So, always bear in mind that the
+time needed to process all files with this option is roughly twice
+the time needed to archive them without it.
+@FIXME{A technical note:
+
+Programs like @command{dump} do not have to read the entire file; by
+examining the file system directly, they can determine in advance
+exactly where the holes are and thus avoid reading through them. The
+only data it need read are the actual allocated data blocks.
+@GNUTAR{} uses a more portable and straightforward
+archiving approach, it would be fairly difficult that it does
+otherwise. Elizabeth Zwicky writes to @file{comp.unix.internals}, on
+1990-12-10:
+
+@quotation
+What I did say is that you cannot tell the difference between a hole and an
+equivalent number of nulls without reading raw blocks. @code{st_blocks} at
+best tells you how many holes there are; it doesn't tell you @emph{where}.
+Just as programs may, conceivably, care what @code{st_blocks} is (care
+to name one that does?), they may also care where the holes are (I have
+no examples of this one either, but it's equally imaginable).
+
+I conclude from this that good archivers are not portable. One can
+arguably conclude that if you want a portable program, you can in good
+conscience restore files with as many holes as possible, since you can't
+get it right.
+@end quotation
+}
-@FIXME{this is still horrible; need to talk with dan on monday.}
+@cindex sparse formats, defined
+When using @samp{POSIX} archive format, @GNUTAR{} is able to store
+sparse files using in three distinct ways, called @dfn{sparse
+formats}. A sparse format is identified by its @dfn{number},
+consisting, as usual of two decimal numbers, delimited by a dot. By
+default, format @samp{1.0} is used. If, for some reason, you wish to
+use an earlier format, you can select it using
+@option{--sparse-version} option.
-@command{tar} prints out a message about removing the @samp{/} from
-file names. This message appears once per @GNUTAR{}
-invocation. It represents something which ought to be told; ignoring
-what it means can cause very serious surprises, later.
+@table @option
+@opindex sparse-version
+@item --sparse-version=@var{version}
-Some people, nevertheless, do not want to see this message. Wanting to
-play really dangerously, one may of course redirect @command{tar} standard
-error to the sink. For example, under @command{sh}:
+Select the format to store sparse files in. Valid @var{version} values
+are: @samp{0.0}, @samp{0.1} and @samp{1.0}. @xref{Sparse Formats},
+for a detailed description of each format.
+@end table
-@smallexample
-$ @kbd{tar -c -f archive.tar /home 2> /dev/null}
-@end smallexample
+Using @option{--sparse-format} option implies @option{--sparse}.
-@noindent
-Another solution, both nicer and simpler, would be to change to
-the @file{/} directory first, and then avoid absolute notation.
-For example:
+@node Attributes
+@section Handling File Attributes
+@UNREVISED
-@smallexample
-$ @kbd{(cd / && tar -c -f archive.tar home)}
-$ @kbd{tar -c -f archive.tar -C / home}
-@end smallexample
+When @command{tar} reads files, it updates their access times. To
+avoid this, use the @option{--atime-preserve[=METHOD]} option, which can either
+reset the access time retroactively or avoid changing it in the first
+place.
-@include getdate.texi
+Handling of file attributes
-@node Formats
-@chapter Controlling the Archive Format
+@table @option
+@opindex atime-preserve
+@item --atime-preserve
+@itemx --atime-preserve=replace
+@itemx --atime-preserve=system
+Preserve the access times of files that are read. This works only for
+files that you own, unless you have superuser privileges.
+
+@option{--atime-preserve=replace} works on most systems, but it also
+restores the data modification time and updates the status change
+time. Hence it doesn't interact with incremental dumps nicely
+(@pxref{Incremental Dumps}), and it can set access or data modification times
+incorrectly if other programs access the file while @command{tar} is
+running.
+
+@option{--atime-preserve=system} avoids changing the access time in
+the first place, if the operating system supports this.
+Unfortunately, this may or may not work on any given operating system
+or file system. If @command{tar} knows for sure it won't work, it
+complains right away.
+
+Currently @option{--atime-preserve} with no operand defaults to
+@option{--atime-preserve=replace}, but this is intended to change to
+@option{--atime-preserve=system} when the latter is better-supported.
+
+@opindex touch
+@item -m
+@itemx --touch
+Do not extract data modification time.
-Due to historical reasons, there are several formats of tar archives.
-All of them are based on the same principles, but have some subtle
-differences that often make them incompatible with each other.
+When this option is used, @command{tar} leaves the data modification times
+of the files it extracts as the times when the files were extracted,
+instead of setting it to the times recorded in the archive.
-GNU tar is able to create and handle archives in a variety of formats.
-The most frequently used formats are (in alphabetical order):
+This option is meaningless with @option{--list} (@option{-t}).
-@table @asis
-@item gnu
-Format used by @GNUTAR{} versions up to 1.13.25. This format derived
-from an early @acronym{POSIX} standard, adding some improvements such as
-sparse file handling and incremental archives. Unfortunately these
-features were implemented in a way incompatible with other archive
-formats.
+@opindex same-owner
+@item --same-owner
+Create extracted files with the same ownership they have in the
+archive.
-Archives in @samp{gnu} format are able to hold pathnames of unlimited
-length.
+This is the default behavior for the superuser,
+so this option is meaningful only for non-root users, when @command{tar}
+is executed on those systems able to give files away. This is
+considered as a security flaw by many people, at least because it
+makes quite difficult to correctly account users for the disk space
+they occupy. Also, the @code{suid} or @code{sgid} attributes of
+files are easily and silently lost when files are given away.
-@item oldgnu
-Format used by @GNUTAR{} of versions prior to 1.12.
+When writing an archive, @command{tar} writes the user id and user name
+separately. If it can't find a user name (because the user id is not
+in @file{/etc/passwd}), then it does not write one. When restoring,
+it tries to look the name (if one was written) up in
+@file{/etc/passwd}. If it fails, then it uses the user id stored in
+the archive instead.
-@item v7
-Archive format, compatible with the V7 implementation of tar. This
-format imposes a number of limitations. The most important of them
-are:
+@opindex no-same-owner
+@item --no-same-owner
+@itemx -o
+Do not attempt to restore ownership when extracting. This is the
+default behavior for ordinary users, so this option has an effect
+only for the superuser.
-@enumerate
-@item The maximum length of a file name is limited to 99 characters.
-@item The maximum length of a symbolic link is limited to 99 characters.
-@item It is impossible to store special files (block and character
-devices, fifos etc.)
-@item Maximum value of user or group ID is limited to 2097151 (7777777
-octal)
-@item V7 archives do not contain symbolic ownership information (user
-and group name of the file owner).
-@end enumerate
+@opindex numeric-owner
+@item --numeric-owner
+The @option{--numeric-owner} option allows (ANSI) archives to be written
+without user/group name information or such information to be ignored
+when extracting. It effectively disables the generation and/or use
+of user/group name information. This option forces extraction using
+the numeric ids from the archive, ignoring the names.
-This format has traditionally been used by Automake when producing
-Makefiles. This practice will change in the future, in the meantime,
-however this means that projects containing filenames more than 99
-characters long will not be able to use @GNUTAR{} @value{VERSION} and
-Automake prior to 1.9.
+This is useful in certain circumstances, when restoring a backup from
+an emergency floppy with different passwd/group files for example.
+It is otherwise impossible to extract files with the right ownerships
+if the password file in use during the extraction does not match the
+one belonging to the file system(s) being extracted. This occurs,
+for example, if you are restoring your files after a major crash and
+had booted from an emergency floppy with no password file or put your
+disk into another machine to do the restore.
-@item ustar
-Archive format defined by @acronym{POSIX.1-1988} specification. It stores
-symbolic ownership information. It is also able to store
-special files. However, it imposes several restrictions as well:
+The numeric ids are @emph{always} saved into @command{tar} archives.
+The identifying names are added at create time when provided by the
+system, unless @option{--old-archive} (@option{-o}) is used. Numeric ids could be
+used when moving archives between a collection of machines using
+a centralized management for attribution of numeric ids to users
+and groups. This is often made through using the NIS capabilities.
-@enumerate
-@item The maximum length of a file name is limited to 256 characters,
-provided that the filename can be split at directory separator in
-two parts, first of them being at most 155 bytes long. So, in most
-cases the maximum file name length will be shorter than 256
-characters.
-@item The maximum length of a symbolic link name is limited to
-100 characters.
-@item Maximum size of a file the archive is able to accomodate
-is 8GB
-@item Maximum value of UID/GID is 2097151.
-@item Maximum number of bits in device major and minor numbers is 21.
-@end enumerate
+When making a @command{tar} file for distribution to other sites, it
+is sometimes cleaner to use a single owner for all files in the
+distribution, and nicer to specify the write permission bits of the
+files as stored in the archive independently of their actual value on
+the file system. The way to prepare a clean distribution is usually
+to have some Makefile rule creating a directory, copying all needed
+files in that directory, then setting ownership and permissions as
+wanted (there are a lot of possible schemes), and only then making a
+@command{tar} archive out of this directory, before cleaning
+everything out. Of course, we could add a lot of options to
+@GNUTAR{} for fine tuning permissions and ownership.
+This is not the good way, I think. @GNUTAR{} is
+already crowded with options and moreover, the approach just explained
+gives you a great deal of control already.
-@item star
-Format used by J@"org Schilling @command{star}
-implementation. @GNUTAR{} is able to read @samp{star} archives but
-currently does not produce them.
+@xopindex{same-permissions, short description}
+@xopindex{preserve-permissions, short description}
+@item -p
+@itemx --same-permissions
+@itemx --preserve-permissions
+Extract all protection information.
-@item posix
-Archive format defined by @acronym{POSIX.1-2001} specification. This is the
-most flexible and feature-rich format. It does not impose any
-restrictions on file sizes or filename lengths. This format is quite
-recent, so not all tar implementations are able to handle it properly.
-However, this format is designed in such a way that any tar
-implementation able to read @samp{ustar} archives will be able to read
-most @samp{posix} archives as well, with the only exception that any
-additional information (such as long file names etc.) will in such
-case be extracted as plain text files along with the files it refers to.
+This option causes @command{tar} to set the modes (access permissions) of
+extracted files exactly as recorded in the archive. If this option
+is not used, the current @code{umask} setting limits the permissions
+on extracted files. This option is by default enabled when
+@command{tar} is executed by a superuser.
-This archive format will be the default format for future versions
-of @GNUTAR{}.
-@end table
+This option is meaningless with @option{--list} (@option{-t}).
-The following table summarizes the limitations of each of these
-formats:
+@opindex preserve
+@item --preserve
+Same as both @option{--same-permissions} and @option{--same-order}.
-@multitable @columnfractions .10 .20 .20 .20 .20
-@item Format @tab UID @tab File Size @tab Path Name @tab Devn
-@item gnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
-@item oldgnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
-@item v7 @tab 2097151 @tab 8GB @tab 99 @tab n/a
-@item ustar @tab 2097151 @tab 8GB @tab 256 @tab 21
-@item posix @tab Unlimited @tab Unlimited @tab Unlimited @tab Unlimited
-@end multitable
+The @option{--preserve} option has no equivalent short option name.
+It is equivalent to @option{--same-permissions} plus @option{--same-order}.
-The default format for @GNUTAR{} is defined at compilation
-time. You may check it by running @command{tar --help}, and examining
-the last lines of its output. Usually, @GNUTAR{} is configured
-to create archives in @samp{gnu} format, however, future version will
-switch to @samp{posix}.
+@FIXME{I do not see the purpose of such an option. (Neither I. FP.)
+Neither do I. --Sergey}
-@menu
-* Portability:: Making @command{tar} Archives More Portable
-* Compression:: Using Less Space through Compression
-* Attributes:: Handling File Attributes
-* Standard:: The Standard Format
-* Extensions:: @acronym{GNU} Extensions to the Archive Format
-* cpio:: Comparison of @command{tar} and @command{cpio}
-@end menu
+@end table
@node Portability
@section Making @command{tar} Archives More Portable
other kind of special files. Do not attempt to save sparse files or
contiguous files as such. Let's discuss a few more problems, in turn.
+@FIXME{Discuss GNU extensions (incremental backups, multi-volume
+archives and archive labels) in GNU and PAX formats.}
+
@menu
* Portable Names:: Portable Names
* dereference:: Symbolic Links
* posix:: @acronym{POSIX} archives
* Checksumming:: Checksumming Problems
* Large or Negative Values:: Large files, negative time stamps, etc.
+* Other Tars:: How to Extract GNU-Specific Data Using
+ Other @command{tar} Implementations
@end menu
@node Portable Names
@cindex File names, using symbolic links
@cindex Symbolic link as file name
+@opindex dereference
Normally, when @command{tar} archives a symbolic link, it writes a
block to the archive naming the target of the link. In that way, the
-@command{tar} archive is a faithful record of the filesystem contents.
-@value{op-dereference} is used with @value{op-create}, and causes
+@command{tar} archive is a faithful record of the file system contents.
+@option{--dereference} (@option{-h}) is used with @option{--create} (@option{-c}), and causes
@command{tar} to archive the files symbolic links point to, instead of
the links themselves. When this option is used, when @command{tar}
encounters a symbolic link, it will archive the linked-to file,
@emph{might} be considered a bug.)
So, for portable archives, do not archive symbolic links as such,
-and use @value{op-dereference}: many systems do not support
+and use @option{--dereference} (@option{-h}): many systems do not support
symbolic links, and moreover, your distribution might be unusable if
it contains unresolved symbolic links.
@cindex Format, old style
@cindex Old style format
@cindex Old style archives
+@cindex v7 archive format
Certain old versions of @command{tar} cannot handle additional
information recorded by newer @command{tar} programs. To create an
archive in V7 format (not ANSI), which can be read by these old
-versions, specify the @value{op-format-v7} option in
-conjunction with the @value{op-create} (@command{tar} also
-accepts @samp{--portability} or @samp{op-old-archive} for this
-option). When you specify it,
+versions, specify the @option{--format=v7} option in
+conjunction with the @option{--create} (@option{-c}) (@command{tar} also
+accepts @option{--portability} or @option{--old-archive} for this
+option). When you specify it,
@command{tar} leaves out information about directories, pipes, fifos,
contiguous files, and device files, and specifies file ownership by
group and user IDs instead of group and user names.
-When updating an archive, do not use @value{op-format-v7}
+When updating an archive, do not use @option{--format=v7}
unless the archive was created using this option.
In most cases, a @emph{new} format archive can be read by an @emph{old}
@command{tar} program without serious trouble, so this option should
seldom be needed. On the other hand, most modern @command{tar}s are
able to read old format archives, so it might be safer for you to
-always use @value{op-format-v7} for your distributions.
+always use @option{--format=v7} for your distributions. Notice,
+however, that @samp{ustar} format is a better alternative, as it is
+free from many of @samp{v7}'s drawbacks.
@node ustar
@subsection Ustar Archive Format
+@cindex ustar archive format
Archive format defined by @acronym{POSIX}.1-1988 specification is called
-@code{ustar}. Although it is more flexible than the V7 format, it
+@code{ustar}. Although it is more flexible than the V7 format, it
still has many restrictions (@xref{Formats,ustar}, for the detailed
-description of @code{ustar} format). Along with V7 format,
+description of @code{ustar} format). Along with V7 format,
@code{ustar} format is a good choice for archives intended to be read
with other implementations of @command{tar}.
-To create archive in @code{ustar} format, use @value{op-format-ustar}
-option in conjunction with the @value{op-create}.
+To create archive in @code{ustar} format, use @option{--format=ustar}
+option in conjunction with the @option{--create} (@option{-c}).
@node gnu
@subsection @acronym{GNU} and old @GNUTAR{} format
+@cindex GNU archive format
+@cindex Old GNU archive format
@GNUTAR{} was based on an early draft of the
@acronym{POSIX} 1003.1 @code{ustar} standard. @acronym{GNU} extensions to
@command{tar}, such as the support for file names longer than 100
@command{tar} programs that follow it.
In the majority of cases, @command{tar} will be configured to create
-this format by default. This will change in the future releases, since
-we plan to make @samp{posix} format the default.
+this format by default. This will change in the future releases, since
+we plan to make @samp{POSIX} format the default.
To force creation a @GNUTAR{} archive, use option
-@value{op-format-gnu}.
+@option{--format=gnu}.
-Some @command{tar} options are currently basing on @GNUTAR{}
-format, and can therefore be used only with @samp{gnu}
-or @samp{oldgnu} archive formats. The list of such options follows:
+@node posix
+@subsection @GNUTAR{} and @acronym{POSIX} @command{tar}
-@itemize @bullet
-@item @value{op-label}, when used with @value{op-create}.
-@item @value{op-incremental}
-@item @value{op-multi-volume}
-@end itemize
+@cindex POSIX archive format
+@cindex PAX archive format
+Starting from version 1.14 @GNUTAR{} features full support for
+@acronym{POSIX.1-2001} archives.
-These options will be re-implemented for the @samp{posix} archive
-format in the future.
+A @acronym{POSIX} conformant archive will be created if @command{tar}
+was given @option{--format=posix} (@option{--format=pax}) option. No
+special option is required to read and extract from a @acronym{POSIX}
+archive.
-@node posix
-@subsection @GNUTAR{} and @acronym{POSIX} @command{tar}
+@menu
+* PAX keywords:: Controlling Extended Header Keywords.
+@end menu
+
+@node PAX keywords
+@subsubsection Controlling Extended Header Keywords
+
+@table @option
+@opindex pax-option
+@item --pax-option=@var{keyword-list}
+Handle keywords in @acronym{PAX} extended headers. This option is
+equivalent to @option{-o} option of the @command{pax} utility.
+@end table
+
+@var{Keyword-list} is a comma-separated
+list of keyword options, each keyword option taking one of
+the following forms:
+
+@table @code
+@item delete=@var{pattern}
+When used with one of archive-creation commands,
+this option instructs @command{tar} to omit from extended header records
+that it produces any keywords matching the string @var{pattern}.
+
+When used in extract or list mode, this option instructs tar
+to ignore any keywords matching the given @var{pattern} in the extended
+header records. In both cases, matching is performed using the pattern
+matching notation described in @acronym{POSIX 1003.2}, 3.13
+(@pxref{wildcards}). For example:
+
+@smallexample
+--pax-option delete=security.*
+@end smallexample
+
+would suppress security-related information.
+
+@item exthdr.name=@var{string}
+
+This keyword allows user control over the name that is written into the
+ustar header blocks for the extended headers. The name is obtained
+from @var{string} after making the following substitutions:
+
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %d @tab The directory name of the file, equivalent to the
+result of the @command{dirname} utility on the translated pathname.
+@item %f @tab The filename of the file, equivalent to the result
+of the @command{basename} utility on the translated pathname.
+@item %p @tab The process ID of the @command{tar} process.
+@item %% @tab A @samp{%} character.
+@end multitable
+
+Any other @samp{%} characters in @var{string} produce undefined
+results.
+
+If no option @samp{exthdr.name=string} is specified, @command{tar}
+will use the following default value:
+
+@smallexample
+%d/PaxHeaders.%p/%f
+@end smallexample
+
+@item globexthdr.name=@var{string}
+This keyword allows user control over the name that is written into
+the ustar header blocks for global extended header records. The name
+is obtained from the contents of @var{string}, after making
+the following substitutions:
+
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %n @tab An integer that represents the
+sequence number of the global extended header record in the archive,
+starting at 1.
+@item %p @tab The process ID of the @command{tar} process.
+@item %% @tab A @samp{%} character.
+@end multitable
+
+Any other @samp{%} characters in @var{string} produce undefined results.
+
+If no option @samp{globexthdr.name=string} is specified, @command{tar}
+will use the following default value:
+
+@smallexample
+$TMPDIR/GlobalHead.%p.%n
+@end smallexample
+
+@noindent
+where @samp{$TMPDIR} represents the value of the @var{TMPDIR}
+environment variable. If @var{TMPDIR} is not set, @command{tar}
+uses @samp{/tmp}.
+
+@item @var{keyword}=@var{value}
+When used with one of archive-creation commands, these keyword/value pairs
+will be included at the beginning of the archive in a global extended
+header record. When used with one of archive-reading commands,
+@command{tar} will behave as if it has encountered these keyword/value
+pairs at the beginning of the archive in a global extended header
+record.
-The version @value{VERSION} of @GNUTAR{} is able
-to read and create archives conforming to @acronym{POSIX.1-2001} standard.
+@item @var{keyword}:=@var{value}
+When used with one of archive-creation commands, these keyword/value pairs
+will be included as records at the beginning of an extended header for
+each file. This is effectively equivalent to @var{keyword}=@var{value}
+form except that it creates no global extended header records.
-A @acronym{POSIX} conformant archive will be created if @command{tar}
-was given @value{op-format-posix} option.
-Notice, that currently @acronym{GNU} extensions are not
-allowed with this format. Following is the list of options that
-cannot be used with @value{op-format-posix}:
+When used with one of archive-reading commands, @command{tar} will
+behave as if these keyword/value pairs were included as records at the
+end of each extended header; thus, they will override any global or
+file-specific extended header record keywords of the same names.
+For example, in the command:
-@itemize @bullet
-@item @value{op-label}, when used with @value{op-create}.
-@item @value{op-incremental}
-@item @value{op-multi-volume}
-@end itemize
+@smallexample
+tar --format=posix --create \
+ --file archive --pax-option gname:=user .
+@end smallexample
-This restriction will disappear in the future versions.
+the group name will be forced to a new value for all files
+stored in the archive.
+@end table
@node Checksumming
@subsection Checksumming Problems
@cindex large values
@cindex future time stamps
@cindex negative time stamps
-
-@acronym{POSIX} @command{tar} format uses fixed-sized unsigned octal strings
-to represent numeric values. User and group IDs and device major and
-minor numbers have unsigned 21-bit representations, and file sizes and
-times have unsigned 33-bit representations. @GNUTAR{}
-generates @acronym{POSIX} representations when possible, but for values
-outside the @acronym{POSIX} range it generates two's-complement base-256
-strings: uids, gids, and device numbers have signed 57-bit
-representations, and file sizes and times have signed 89-bit
-representations. These representations are an extension to @acronym{POSIX}
-@command{tar} format, so they are not universally portable.
-
-The most common portability problems with out-of-range numeric values
-are large files and future or negative time stamps.
-
-Portable archives should avoid members of 8 GB or larger, as @acronym{POSIX}
-@command{tar} format cannot represent them.
-
-Portable archives should avoid time stamps from the future. @acronym{POSIX}
-@command{tar} format can represent time stamps in the range 1970-01-01
-00:00:00 through 2242-03-16 12:56:31 @sc{utc}. However, many current
-hosts use a signed 32-bit @code{time_t}, or internal time stamp format,
-and cannot represent time stamps after 2038-01-19 03:14:07 @sc{utc}; so
-portable archives must avoid these time stamps for many years to come.
-
-Portable archives should also avoid time stamps before 1970. These time
-stamps are a common @acronym{POSIX} extension but their @code{time_t}
-representations are negative. Many traditional @command{tar}
-implementations generate a two's complement representation for negative
-time stamps that assumes a signed 32-bit @code{time_t}; hence they
-generate archives that are not portable to hosts with differing
-@code{time_t} representations. @GNUTAR{} recognizes this
-situation when it is run on host with a signed 32-bit @code{time_t}, but
-it issues a warning, as these time stamps are nonstandard and unportable.
-
-@node Compression
-@section Using Less Space through Compression
+@UNREVISED{}
+
+The above sections suggest to use @samp{oldest possible} archive
+format if in doubt. However, sometimes it is not possible. If you
+attempt to archive a file whose metadata cannot be represented using
+required format, @GNUTAR{} will print error message and ignore such a
+file. You will than have to switch to a format that is able to
+handle such values. The format summary table (@pxref{Formats}) will
+help you to do so.
+
+In particular, when trying to archive files larger than 8GB or with
+timestamps not in the range 1970-01-01 00:00:00 through 2242-03-16
+12:56:31 @sc{utc}, you will have to chose between @acronym{GNU} and
+@acronym{POSIX} archive formats. When considering which format to
+choose, bear in mind that the @acronym{GNU} format uses
+two's-complement base-256 notation to store values that do not fit
+into standard @acronym{ustar} range. Such archives can generally be
+read only by a @GNUTAR{} implementation. Moreover, they sometimes
+cannot be correctly restored on another hosts even by @GNUTAR{}. For
+example, using two's complement representation for negative time
+stamps that assumes a signed 32-bit @code{time_t} generates archives
+that are not portable to hosts with differing @code{time_t}
+representations.
+
+On the other hand, @acronym{POSIX} archives, generally speaking, can
+be extracted by any tar implementation that understands older
+@acronym{ustar} format. The only exception are files larger than 8GB.
+
+@FIXME{Describe how @acronym{POSIX} archives are extracted by non
+POSIX-aware tars.}
+
+@node Other Tars
+@subsection How to Extract GNU-Specific Data Using Other @command{tar} Implementations
+
+In previous sections you became acquainted with various quirks
+necessary to make your archives portable. Sometimes you may need to
+extract archives containing GNU-specific members using some
+third-party @command{tar} implementation or an older version of
+@GNUTAR{}. Of course your best bet is to have @GNUTAR{} installed,
+but if it is for some reason impossible, this section will explain
+how to cope without it.
+
+When we speak about @dfn{GNU-specific} members we mean two classes of
+them: members split between the volumes of a multi-volume archive and
+sparse members. You will be able to always recover such members if
+the archive is in PAX format. In addition split members can be
+recovered from archives in old GNU format. The following subsections
+describe the required procedures in detail.
@menu
-* gzip:: Creating and Reading Compressed Archives
-* sparse:: Archiving Sparse Files
+* Split Recovery:: Members Split Between Volumes
+* Sparse Recovery:: Sparse Members
@end menu
-@node gzip
-@subsection Creating and Reading Compressed Archives
-@cindex Compressed archives
-@cindex Storing archives in compressed format
-@UNREVISED
-
-@table @kbd
-@item -z
-@itemx --gzip
-@itemx --ungzip
-Filter the archive through @command{gzip}.
-@end table
-
-@FIXME{ach; these two bits orig from "compare" (?). where to put?} Some
-format parameters must be taken into consideration when modifying an
-archive.@FIXME{???} Compressed archives cannot be modified.
-
-You can use @samp{--gzip} and @samp{--gunzip} on physical devices
-(tape drives, etc.) and remote files as well as on normal files; data
-to or from such devices or remote files is reblocked by another copy
-of the @command{tar} program to enforce the specified (or default) record
-size. The default compression parameters are used; if you need to
-override them, avoid the @value{op-gzip} option and run @command{gzip}
-explicitly. (Or set the @env{GZIP} environment variable.)
-
-The @value{op-gzip} option does not work with the @value{op-multi-volume}
-option, or with the @value{op-update}, @value{op-append},
-@value{op-concatenate}, or @value{op-delete} operations.
+@node Split Recovery
+@subsubsection Extracting Members Split Between Volumes
-It is not exact to say that @GNUTAR{} is to work in concert
-with @command{gzip} in a way similar to @command{zip}, say. Surely, it is
-possible that @command{tar} and @command{gzip} be done with a single call,
-like in:
+@cindex Mutli-volume archives, extracting using non-GNU tars
+If a member is split between several volumes of an old GNU format archive
+most third party @command{tar} implementation will fail to extract
+it. To extract it, use @command{tarcat} program (@pxref{Tarcat}).
+This program is available from
+@uref{http://www.gnu.org/@/software/@/tar/@/utils/@/tarcat.html, @GNUTAR{}
+home page}. It concatenates several archive volumes into a single
+valid archive. For example, if you have three volumes named from
+@file{vol-1.tar} to @file{vol-3.tar}, you can do the following to
+extract them using a third-party @command{tar}:
@smallexample
-$ @kbd{tar cfz archive.tar.gz subdir}
+$ @kbd{tarcat vol-1.tar vol-2.tar vol-3.tar | tar xf -}
@end smallexample
-@noindent
-to save all of @samp{subdir} into a @code{gzip}'ed archive. Later you
-can do:
+@cindex Mutli-volume archives in PAX format, extracting using non-GNU tars
+You could use this approach for most (although not all) PAX
+format archives as well. However, extracting split members from a PAX
+archive is a much easier task, because PAX volumes are constructed in
+such a way that each part of a split member is extracted to a
+different file by @command{tar} implementations that are not aware of
+GNU extensions. More specifically, the very first part retains its
+original name, and all subsequent parts are named using the pattern:
@smallexample
-$ @kbd{tar xfz archive.tar.gz}
+%d/GNUFileParts.%p/%f.%n
@end smallexample
@noindent
-to explode and unpack.
+where symbols preceeded by @samp{%} are @dfn{macro characters} that
+have the following meaning:
-The difference is that the whole archive is compressed. With
-@command{zip}, archive members are archived individually. @command{tar}'s
-method yields better compression. On the other hand, one can view the
-contents of a @command{zip} archive without having to decompress it. As
-for the @command{tar} and @command{gzip} tandem, you need to decompress the
-archive to see its contents. However, this may be done without needing
-disk space, by using pipes internally:
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %d @tab The directory name of the file, equivalent to the
+result of the @command{dirname} utility on its full name.
+@item %f @tab The file name of the file, equivalent to the result
+of the @command{basename} utility on its full name.
+@item %p @tab The process ID of the @command{tar} process that
+created the archive.
+@item %n @tab Ordinal number of this particular part.
+@end multitable
+
+For example, if the file @file{var/longfile} was split during archive
+creation between three volumes, and the creator @command{tar} process
+had process ID @samp{27962}, then the member names will be:
@smallexample
-$ @kbd{tar tfz archive.tar.gz}
+var/longfile
+var/GNUFileParts.27962/longfile.1
+var/GNUFileParts.27962/longfile.2
@end smallexample
-@cindex corrupted archives
-About corrupted compressed archives: @command{gzip}'ed files have no
-redundancy, for maximum compression. The adaptive nature of the
-compression scheme means that the compression tables are implicitly
-spread all over the archive. If you lose a few blocks, the dynamic
-construction of the compression tables becomes unsynchronized, and there
-is little chance that you could recover later in the archive.
-
-There are pending suggestions for having a per-volume or per-file
-compression in @GNUTAR{}. This would allow for viewing the
-contents without decompression, and for resynchronizing decompression at
-every volume or file, in case of corrupted archives. Doing so, we might
-lose some compressibility. But this would have make recovering easier.
-So, there are pros and cons. We'll see!
-
-@table @kbd
-@item -j
-@itemx --bzip2
-Filter the archive through @code{bzip2}. Otherwise like @value{op-gzip}.
-
-@item -Z
-@itemx --compress
-@itemx --uncompress
-Filter the archive through @command{compress}. Otherwise like
-@value{op-gzip}.
-
-@item --use-compress-program=@var{prog}
-Filter through @var{prog} (must accept @samp{-d}).
-@end table
-
-@value{op-compress} stores an archive in compressed format. This
-option is useful in saving time over networks and space in pipes, and
-when storage space is at a premium. @value{op-compress} causes
-@command{tar} to compress when writing the archive, or to uncompress when
-reading the archive.
-
-To perform compression and uncompression on the archive, @command{tar}
-runs the @command{compress} utility. @command{tar} uses the default
-compression parameters; if you need to override them, avoid the
-@value{op-compress} option and run the @command{compress} utility
-explicitly. It is useful to be able to call the @command{compress}
-utility from within @command{tar} because the @command{compress} utility by
-itself cannot access remote tape drives.
-
-The @value{op-compress} option will not work in conjunction with the
-@value{op-multi-volume} option or the @value{op-append}, @value{op-update}
-and @value{op-delete} operations. @xref{Operations}, for
-more information on these operations.
-
-If there is no compress utility available, @command{tar} will report an error.
-@strong{Please note} that the @command{compress} program may be covered by
-a patent, and therefore we recommend you stop using it.
-
-@value{op-bzip2} acts like @value{op-compress}, except that it uses
-the @code{bzip2} utility.
-
-@table @kbd
-@item --compress
-@itemx --uncompress
-@itemx -z
-@itemx -Z
-When this option is specified, @command{tar} will compress (when
-writing an archive), or uncompress (when reading an archive). Used in
-conjunction with the @value{op-create}, @value{op-extract},
-@value{op-list} and @value{op-compare} operations.
-@end table
-
-You can have archives be compressed by using the @value{op-gzip} option.
-This will arrange for @command{tar} to use the @command{gzip} program to be
-used to compress or uncompress the archive wren writing or reading it.
-
-To use the older, obsolete, @command{compress} program, use the
-@value{op-compress} option. The @acronym{GNU} Project recommends you not use
-@command{compress}, because there is a patent covering the algorithm it
-uses. You could be sued for patent infringement merely by running
-@command{compress}.
-
-I have one question, or maybe it's a suggestion if there isn't a way
-to do it now. I would like to use @value{op-gzip}, but I'd also like
-the output to be fed through a program like @acronym{GNU}
-@command{ecc} (actually, right now that's @samp{exactly} what I'd like
-to use :-)), basically adding ECC protection on top of compression.
-It seems as if this should be quite easy to do, but I can't work out
-exactly how to go about it. Of course, I can pipe the standard output
-of @command{tar} through @command{ecc}, but then I lose (though I
-haven't started using it yet, I confess) the ability to have
-@command{tar} use @command{rmt} for it's I/O (I think).
-
-I think the most straightforward thing would be to let me specify a
-general set of filters outboard of compression (preferably ordered,
-so the order can be automatically reversed on input operations, and
-with the options they require specifiable), but beggars shouldn't be
-choosers and anything you decide on would be fine with me.
-
-By the way, I like @command{ecc} but if (as the comments say) it can't
-deal with loss of block sync, I'm tempted to throw some time at adding
-that capability. Supposing I were to actually do such a thing and
-get it (apparently) working, do you accept contributed changes to
-utilities like that? (Leigh Clayton @file{loc@@soliton.com}, May 1995).
-
-Isn't that exactly the role of the @value{op-use-compress-prog} option?
-I never tried it myself, but I suspect you may want to write a
-@var{prog} script or program able to filter stdin to stdout to
-way you want. It should recognize the @samp{-d} option, for when
-extraction is needed rather than creation.
-
-It has been reported that if one writes compressed data (through the
-@value{op-gzip} or @value{op-compress} options) to a DLT and tries to use
-the DLT compression mode, the data will actually get bigger and one will
-end up with less space on the tape.
-
-@node sparse
-@subsection Archiving Sparse Files
-@cindex Sparse Files
-@UNREVISED
-
-@table @kbd
-@item -S
-@itemx --sparse
-Handle sparse files efficiently.
-@end table
-
-This option causes all files to be put in the archive to be tested for
-sparseness, and handled specially if they are. The @value{op-sparse}
-option is useful when many @code{dbm} files, for example, are being
-backed up. Using this option dramatically decreases the amount of
-space needed to store such a file.
-
-In later versions, this option may be removed, and the testing and
-treatment of sparse files may be done automatically with any special
-@acronym{GNU} options. For now, it is an option needing to be specified on
-the command line with the creation or updating of an archive.
-
-Files in the filesystem occasionally have ``holes.'' A hole in a file
-is a section of the file's contents which was never written. The
-contents of a hole read as all zeros. On many operating systems,
-actual disk storage is not allocated for holes, but they are counted
-in the length of the file. If you archive such a file, @command{tar}
-could create an archive longer than the original. To have @command{tar}
-attempt to recognize the holes in a file, use @value{op-sparse}. When
-you use the @value{op-sparse} option, then, for any file using less
-disk space than would be expected from its length, @command{tar} searches
-the file for consecutive stretches of zeros. It then records in the
-archive for the file where the consecutive stretches of zeros are, and
-only archives the ``real contents'' of the file. On extraction (using
-@value{op-sparse} is not needed on extraction) any such files have
-holes created wherever the continuous stretches of zeros were found.
-Thus, if you use @value{op-sparse}, @command{tar} archives won't take
-more space than the original.
-
-A file is sparse if it contains blocks of zeros whose existence is
-recorded, but that have no space allocated on disk. When you specify
-the @value{op-sparse} option in conjunction with the @value{op-create}
-operation, @command{tar} tests all files for sparseness while archiving.
-If @command{tar} finds a file to be sparse, it uses a sparse representation of
-the file in the archive. @value{xref-create}, for more information
-about creating archives.
-
-@value{op-sparse} is useful when archiving files, such as dbm files,
-likely to contain many nulls. This option dramatically
-decreases the amount of space needed to store such an archive.
-
-@quotation
-@strong{Please Note:} Always use @value{op-sparse} when performing file
-system backups, to avoid archiving the expanded forms of files stored
-sparsely in the system.
-
-Even if your system has no sparse files currently, some may be
-created in the future. If you use @value{op-sparse} while making file
-system backups as a matter of course, you can be assured the archive
-will never take more space on the media than the files take on disk
-(otherwise, archiving a disk filled with sparse files might take
-hundreds of tapes). @FIXME-xref{incremental when node name is set.}
-@end quotation
-
-@command{tar} ignores the @value{op-sparse} option when reading an archive.
-
-@table @kbd
-@item --sparse
-@itemx -S
-Files stored sparsely in the file system are represented sparsely in
-the archive. Use in conjunction with write operations.
-@end table
-
-However, users should be well aware that at archive creation time,
-@GNUTAR{} still has to read whole disk file to
-locate the @dfn{holes}, and so, even if sparse files use little space
-on disk and in the archive, they may sometimes require inordinate
-amount of time for reading and examining all-zero blocks of a file.
-Although it works, it's painfully slow for a large (sparse) file, even
-though the resulting tar archive may be small. (One user reports that
-dumping a @file{core} file of over 400 megabytes, but with only about
-3 megabytes of actual data, took about 9 minutes on a Sun Sparcstation
-ELC, with full CPU utilization.)
-
-This reading is required in all cases and is not related to the fact
-the @value{op-sparse} option is used or not, so by merely @emph{not}
-using the option, you are not saving time@footnote{Well! We should say
-the whole truth, here. When @value{op-sparse} is selected while creating
-an archive, the current @command{tar} algorithm requires sparse files to be
-read twice, not once. We hope to develop a new archive format for saving
-sparse files in which one pass will be sufficient.}.
-
-Programs like @command{dump} do not have to read the entire file; by
-examining the file system directly, they can determine in advance
-exactly where the holes are and thus avoid reading through them. The
-only data it need read are the actual allocated data blocks.
-@GNUTAR{} uses a more portable and straightforward
-archiving approach, it would be fairly difficult that it does
-otherwise. Elizabeth Zwicky writes to @file{comp.unix.internals}, on
-1990-12-10:
-
-@quotation
-What I did say is that you cannot tell the difference between a hole and an
-equivalent number of nulls without reading raw blocks. @code{st_blocks} at
-best tells you how many holes there are; it doesn't tell you @emph{where}.
-Just as programs may, conceivably, care what @code{st_blocks} is (care
-to name one that does?), they may also care where the holes are (I have
-no examples of this one either, but it's equally imaginable).
-
-I conclude from this that good archivers are not portable. One can
-arguably conclude that if you want a portable program, you can in good
-conscience restore files with as many holes as possible, since you can't
-get it right.
-@end quotation
-
-@node Attributes
-@section Handling File Attributes
-@UNREVISED
-
-When @command{tar} reads files, this causes them to have the access
-times updated. To have @command{tar} attempt to set the access times
-back to what they were before they were read, use the
-@value{op-atime-preserve} option.
+When you extract your archive using a third-party @command{tar}, these
+files will be created on your disk, and the only thing you will need
+to do to restore your file in its original form is concatenate them in
+the proper order, for example:
-Handling of file attributes
+@smallexample
+@group
+$ @kbd{cd var}
+$ @kbd{cat GNUFileParts.27962/longfile.1 \
+ GNUFileParts.27962/longfile.2 >> longfile}
+$ rm -f GNUFileParts.27962
+@end group
+@end smallexample
-@table @kbd
-@item --atime-preserve
-Preserve access times on files that are read.
-This doesn't work for files that
-you don't own, unless you're root, and it doesn't interact with
-incremental dumps nicely (@pxref{Backups}), and it can set access or
-modification times incorrectly if other programs access the file while
-@command{tar} is running; but it is good enough for some purposes.
+Notice, that if the @command{tar} implementation you use supports PAX
+format archives, it will probably emit warnings about unknown keywords
+during extraction. They will look like this:
-@item -m
-@itemx --touch
-Do not extract file modified time.
+@smallexample
+@group
+Tar file too small
+Unknown extended header keyword 'GNU.volume.filename' ignored.
+Unknown extended header keyword 'GNU.volume.size' ignored.
+Unknown extended header keyword 'GNU.volume.offset' ignored.
+@end group
+@end smallexample
-When this option is used, @command{tar} leaves the modification times
-of the files it extracts as the time when the files were extracted,
-instead of setting it to the time recorded in the archive.
+@noindent
+You can safely ignore these warnings.
-This option is meaningless with @value{op-list}.
+If your @command{tar} implementation is not PAX-aware, you will get
+more warnings and more files generated on your disk, e.g.:
-@item --same-owner
-Create extracted files with the same ownership they have in the
-archive.
+@smallexample
+@group
+$ @kbd{tar xf vol-1.tar}
+var/PaxHeaders.27962/longfile: Unknown file type 'x', extracted as
+normal file
+Unexpected EOF in archive
+$ @kbd{tar xf vol-2.tar}
+tmp/GlobalHead.27962.1: Unknown file type 'g', extracted as normal file
+GNUFileParts.27962/PaxHeaders.27962/sparsefile.1: Unknown file type
+'x', extracted as normal file
+@end group
+@end smallexample
-This is the default behavior for the superuser,
-so this option is meaningful only for non-root users, when @command{tar}
-is executed on those systems able to give files away. This is
-considered as a security flaw by many people, at least because it
-makes quite difficult to correctly account users for the disk space
-they occupy. Also, the @code{suid} or @code{sgid} attributes of
-files are easily and silently lost when files are given away.
+Ignore these warnings. The @file{PaxHeaders.*} directories created
+will contain files with @dfn{extended header keywords} describing the
+extracted files. You can delete them, unless they describe sparse
+members. Read further to learn more about them.
+
+@node Sparse Recovery
+@subsubsection Extracting Sparse Members
+
+@cindex sparse files, extracting with non-GNU tars
+Any @command{tar} implementation will be able to extract sparse members from a
+PAX archive. However, the extracted files will be @dfn{condensed},
+i.e., any zero blocks will be removed from them. When we restore such
+a condensed file to its original form, by adding zero bloks (or
+@dfn{holes}) back to their original locations, we call this process
+@dfn{expanding} a compressed sparse file.
+
+@pindex xsparse
+To expand a file, you will need a simple auxiliary program called
+@command{xsparse}. It is available in source form from
+@uref{http://www.gnu.org/@/software/@/tar/@/utils/@/xsparse.html, @GNUTAR{}
+home page}.
+
+@cindex sparse files v.1.0, extracting with non-GNU tars
+Let's begin with archive members in @dfn{sparse format
+version 1.0}@footnote{@xref{PAX 1}.}, which are the easiest to expand.
+The condensed file will contain both file map and file data, so no
+additional data will be needed to restore it. If the original file
+name was @file{@var{dir}/@var{name}}, then the condensed file will be
+named @file{@var{dir}/@/GNUSparseFile.@var{n}/@/@var{name}}, where
+@var{n} is a decimal number@footnote{technically speaking, @var{n} is a
+@dfn{process ID} of the @command{tar} process which created the
+archive (@pxref{PAX keywords}).}.
+
+To expand a version 1.0 file, run @command{xsparse} as follows:
-When writing an archive, @command{tar} writes the user id and user name
-separately. If it can't find a user name (because the user id is not
-in @file{/etc/passwd}), then it does not write one. When restoring,
-and doing a @code{chmod} like when you use @value{op-same-permissions},
-@FIXME{same-owner?}it tries to look the name (if one was written)
-up in @file{/etc/passwd}. If it fails, then it uses the user id
-stored in the archive instead.
+@smallexample
+$ @kbd{xsparse @file{cond-file}}
+@end smallexample
-@item --no-same-owner
-@itemx -o
-Do not attempt to restore ownership when extracting. This is the
-default behavior for ordinary users, so this option has an effect
-only for the superuser.
+@noindent
+where @file{cond-file} is the name of the condensed file. The utility
+will deduce the name for the resulting expanded file using the
+following algorithm:
+
+@enumerate 1
+@item If @file{cond-file} does not contain any directories,
+@file{../cond-file} will be used;
+
+@item If @file{cond-file} has the form
+@file{@var{dir}/@var{t}/@var{name}}, where both @var{t} and @var{name}
+are simple names, with no @samp{/} characters in them, the output file
+name will be @file{@var{dir}/@var{name}}.
+
+@item Otherwise, if @file{cond-file} has the form
+@file{@var{dir}/@var{name}}, the output file name will be
+@file{@var{name}}.
+@end enumerate
-@item --numeric-owner
-The @value{op-numeric-owner} option allows (ANSI) archives to be written
-without user/group name information or such information to be ignored
-when extracting. It effectively disables the generation and/or use
-of user/group name information. This option forces extraction using
-the numeric ids from the archive, ignoring the names.
+In the unlikely case when this algorithm does not suite your needs,
+you can explicitly specify output file name as a second argument to
+the command:
-This is useful in certain circumstances, when restoring a backup from
-an emergency floppy with different passwd/group files for example.
-It is otherwise impossible to extract files with the right ownerships
-if the password file in use during the extraction does not match the
-one belonging to the filesystem(s) being extracted. This occurs,
-for example, if you are restoring your files after a major crash and
-had booted from an emergency floppy with no password file or put your
-disk into another machine to do the restore.
+@smallexample
+$ @kbd{xsparse @file{cond-file} @file{out-file}}
+@end smallexample
-The numeric ids are @emph{always} saved into @command{tar} archives.
-The identifying names are added at create time when provided by the
-system, unless @value{op-old-archive} is used. Numeric ids could be
-used when moving archives between a collection of machines using
-a centralized management for attribution of numeric ids to users
-and groups. This is often made through using the NIS capabilities.
+It is often a good idea to run @command{xsparse} in @dfn{dry run} mode
+first. In this mode, the command does not actually expand the file,
+but verbosely lists all actions it would be taking to do so. The dry
+run mode is enabled by @option{-n} command line argument:
-When making a @command{tar} file for distribution to other sites, it
-is sometimes cleaner to use a single owner for all files in the
-distribution, and nicer to specify the write permission bits of the
-files as stored in the archive independently of their actual value on
-the file system. The way to prepare a clean distribution is usually
-to have some Makefile rule creating a directory, copying all needed
-files in that directory, then setting ownership and permissions as
-wanted (there are a lot of possible schemes), and only then making a
-@command{tar} archive out of this directory, before cleaning
-everything out. Of course, we could add a lot of options to
-@GNUTAR{} for fine tuning permissions and ownership.
-This is not the good way, I think. @GNUTAR{} is
-already crowded with options and moreover, the approach just explained
-gives you a great deal of control already.
+@smallexample
+@group
+$ @kbd{xsparse -n /home/gray/GNUSparseFile.6058/sparsefile}
+Reading v.1.0 sparse map
+Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
+`/home/gray/sparsefile'
+Finished dry run
+@end group
+@end smallexample
-@item -p
-@itemx --same-permissions
-@itemx --preserve-permissions
-Extract all protection information.
+To actually expand the file, you would run:
-This option causes @command{tar} to set the modes (access permissions) of
-extracted files exactly as recorded in the archive. If this option
-is not used, the current @code{umask} setting limits the permissions
-on extracted files.
+@smallexample
+$ @kbd{xsparse /home/gray/GNUSparseFile.6058/sparsefile}
+@end smallexample
-This option is meaningless with @value{op-list}.
+@noindent
+The program behaves the same way all UNIX utilities do: it will keep
+quiet unless it has simething important to tell you (e.g. an error
+condition or something). If you wish it to produce verbose output,
+similar to that from the dry run mode, use @option{-v} option:
-@item --preserve
-Same as both @value{op-same-permissions} and @value{op-same-order}.
+@smallexample
+@group
+$ @kbd{xsparse -v /home/gray/GNUSparseFile.6058/sparsefile}
+Reading v.1.0 sparse map
+Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
+`/home/gray/sparsefile'
+Done
+@end group
+@end smallexample
-The @value{op-preserve} option has no equivalent short option name.
-It is equivalent to @value{op-same-permissions} plus @value{op-same-order}.
+Additionally, if your @command{tar} implementation has extracted the
+@dfn{extended headers} for this file, you can instruct @command{xstar}
+to use them in order to verify the integrity of the expanded file.
+The option @option{-x} sets the name of the extended header file to
+use. Continuing our example:
-@FIXME{I do not see the purpose of such an option. (Neither I. FP.)}
+@smallexample
+@group
+$ @kbd{xsparse -v -x /home/gray/PaxHeaders.6058/sparsefile \
+ /home/gray/GNUSparseFile.6058/sparsefile}
+Reading extended header file
+Found variable GNU.sparse.major = 1
+Found variable GNU.sparse.minor = 0
+Found variable GNU.sparse.name = sparsefile
+Found variable GNU.sparse.realsize = 217481216
+Reading v.1.0 sparse map
+Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
+`/home/gray/sparsefile'
+Done
+@end group
+@end smallexample
-@end table
+@anchor{extracting sparse v.0.x}
+@cindex sparse files v.0.1, extracting with non-GNU tars
+@cindex sparse files v.0.0, extracting with non-GNU tars
+An @dfn{extended header} is a special @command{tar} archive header
+that precedes an archive member and contains a set of
+@dfn{variables}, describing the member properties that cannot be
+stored in the standard @code{ustar} header. While optional for
+expanding sparse version 1.0 members, use of extended headers is
+mandatory when expanding sparse members in older sparse formats: v.0.0
+and v.0.1 (The sparse formats are described in detail in @ref{Sparse
+Formats}.) So, for this format, the question is: how to obtain
+extended headers from the archive?
+
+If you use a @command{tar} implementation that does not support PAX
+format, extended headers for each member will be extracted as a
+separate file. If we represent the member name as
+@file{@var{dir}/@var{name}}, then the extended header file will be
+named @file{@var{dir}/@/PaxHeaders.@var{n}/@/@var{name}}, where
+@var{n} is an integer number.
+
+Things become more difficult if your @command{tar} implementation
+does support PAX headers, because in this case you will have to
+manually extract the headers. We recommend the following algorithm:
+
+@enumerate 1
+@item
+Consult the documentation of your @command{tar} implementation for an
+option that prints @dfn{block numbers} along with the archive
+listing (analogous to @GNUTAR{}'s @option{-R} option). For example,
+@command{star} has @option{-block-number}.
-@node Standard
-@section Basic Tar Format
-@UNREVISED
+@item
+Obtain verbose listing using the @samp{block number} option, and
+find block numbers of the sparse member in question and the member
+immediately following it. For example, running @command{star} on our
+archive we obtain:
-While an archive may contain many files, the archive itself is a
-single ordinary file. Like any other file, an archive file can be
-written to a storage device such as a tape or disk, sent through a
-pipe or over a network, saved on the active file system, or even
-stored in another archive. An archive file is not easy to read or
-manipulate without using the @command{tar} utility or Tar mode in
-@acronym{GNU} Emacs.
-
-Physically, an archive consists of a series of file entries terminated
-by an end-of-archive entry, which consists of two 512 blocks of zero
-bytes. A file
-entry usually describes one of the files in the archive (an
-@dfn{archive member}), and consists of a file header and the contents
-of the file. File headers contain file names and statistics, checksum
-information which @command{tar} uses to detect file corruption, and
-information about file types.
-
-Archives are permitted to have more than one member with the same
-member name. One way this situation can occur is if more than one
-version of a file has been stored in the archive. For information
-about adding new versions of a file to an archive, see @ref{update}.
-@FIXME-xref{To learn more about having more than one archive member with the
-same name, see -backup node, when it's written.}
-
-In addition to entries describing archive members, an archive may
-contain entries which @command{tar} itself uses to store information.
-@value{xref-label}, for an example of such an archive entry.
-
-A @command{tar} archive file contains a series of blocks. Each block
-contains @code{BLOCKSIZE} bytes. Although this format may be thought
-of as being on magnetic tape, other media are often used.
-
-Each file archived is represented by a header block which describes
-the file, followed by zero or more blocks which give the contents
-of the file. At the end of the archive file there are two 512-byte blocks
-filled with binary zeros as an end-of-file marker. A reasonable system
-should write such end-of-file marker at the end of an archive, but
-must not assume that such a block exists when reading an archive. In
-particular @GNUTAR{} always issues a warning if it does not encounter it.
-
-The blocks may be @dfn{blocked} for physical I/O operations.
-Each record of @var{n} blocks (where @var{n} is set by the
-@value{op-blocking-factor} option to @command{tar}) is written with a single
-@w{@samp{write ()}} operation. On magnetic tapes, the result of
-such a write is a single record. When writing an archive,
-the last record of blocks should be written at the full size, with
-blocks after the zero block containing all zeros. When reading
-an archive, a reasonable system should properly handle an archive
-whose last record is shorter than the rest, or which contains garbage
-records after a zero block.
-
-The header block is defined in C as follows. In the @GNUTAR{}
-distribution, this is part of file @file{src/tar.h}:
-
-@smallexample
-@include header.texi
-@end smallexample
-
-All characters in header blocks are represented by using 8-bit
-characters in the local variant of ASCII. Each field within the
-structure is contiguous; that is, there is no padding used within
-the structure. Each character on the archive medium is stored
-contiguously.
-
-Bytes representing the contents of files (after the header block
-of each file) are not translated in any way and are not constrained
-to represent characters in any character set. The @command{tar} format
-does not distinguish text files from binary files, and no translation
-of file contents is performed.
-
-The @code{name}, @code{linkname}, @code{magic}, @code{uname}, and
-@code{gname} are null-terminated character strings. All other fields
-are zero-filled octal numbers in ASCII. Each numeric field of width
-@var{w} contains @var{w} minus 1 digits, and a null.
-
-The @code{name} field is the file name of the file, with directory names
-(if any) preceding the file name, separated by slashes.
-
-@FIXME{how big a name before field overflows?}
-
-The @code{mode} field provides nine bits specifying file permissions
-and three bits to specify the Set UID, Set GID, and Save Text
-(@dfn{sticky}) modes. Values for these bits are defined above.
-When special permissions are required to create a file with a given
-mode, and the user restoring files from the archive does not hold such
-permissions, the mode bit(s) specifying those special permissions
-are ignored. Modes which are not supported by the operating system
-restoring files from the archive will be ignored. Unsupported modes
-should be faked up when creating or updating an archive; e.g.@: the
-group permission could be copied from the @emph{other} permission.
-
-The @code{uid} and @code{gid} fields are the numeric user and group
-ID of the file owners, respectively. If the operating system does
-not support numeric user or group IDs, these fields should be ignored.
-
-The @code{size} field is the size of the file in bytes; linked files
-are archived with this field specified as zero. @FIXME-xref{Modifiers, in
-particular the @value{op-incremental} option.}
-
-The @code{mtime} field is the modification time of the file at the time
-it was archived. It is the ASCII representation of the octal value of
-the last time the file was modified, represented as an integer number of
-seconds since January 1, 1970, 00:00 Coordinated Universal Time.
-
-The @code{chksum} field is the ASCII representation of the octal value
-of the simple sum of all bytes in the header block. Each 8-bit
-byte in the header is added to an unsigned integer, initialized to
-zero, the precision of which shall be no less than seventeen bits.
-When calculating the checksum, the @code{chksum} field is treated as
-if it were all blanks.
-
-The @code{typeflag} field specifies the type of file archived. If a
-particular implementation does not recognize or permit the specified
-type, the file will be extracted as if it were a regular file. As this
-action occurs, @command{tar} issues a warning to the standard error.
-
-The @code{atime} and @code{ctime} fields are used in making incremental
-backups; they store, respectively, the particular file's access time
-and last inode-change time.
-
-The @code{offset} is used by the @value{op-multi-volume} option, when
-making a multi-volume archive. The offset is number of bytes into
-the file that we need to restart at to continue the file on the next
-tape, i.e., where we store the location that a continued file is
-continued at.
-
-The following fields were added to deal with sparse files. A file
-is @dfn{sparse} if it takes in unallocated blocks which end up being
-represented as zeros, i.e., no useful data. A test to see if a file
-is sparse is to look at the number blocks allocated for it versus the
-number of characters in the file; if there are fewer blocks allocated
-for the file than would normally be allocated for a file of that
-size, then the file is sparse. This is the method @command{tar} uses to
-detect a sparse file, and once such a file is detected, it is treated
-differently from non-sparse files.
-
-Sparse files are often @code{dbm} files, or other database-type files
-which have data at some points and emptiness in the greater part of
-the file. Such files can appear to be very large when an @samp{ls
--l} is done on them, when in truth, there may be a very small amount
-of important data contained in the file. It is thus undesirable
-to have @command{tar} think that it must back up this entire file, as
-great quantities of room are wasted on empty blocks, which can lead
-to running out of room on a tape far earlier than is necessary.
-Thus, sparse files are dealt with so that these empty blocks are
-not written to the tape. Instead, what is written to the tape is a
-description, of sorts, of the sparse file: where the holes are, how
-big the holes are, and how much data is found at the end of the hole.
-This way, the file takes up potentially far less room on the tape,
-and when the file is extracted later on, it will look exactly the way
-it looked beforehand. The following is a description of the fields
-used to handle a sparse file:
-
-The @code{sp} is an array of @code{struct sparse}. Each @code{struct
-sparse} contains two 12-character strings which represent an offset
-into the file and a number of bytes to be written at that offset.
-The offset is absolute, and not relative to the offset in preceding
-array element.
-
-The header can hold four of these @code{struct sparse} at the moment;
-if more are needed, they are not stored in the header.
-
-The @code{isextended} flag is set when an @code{extended_header}
-is needed to deal with a file. Note that this means that this flag
-can only be set when dealing with a sparse file, and it is only set
-in the event that the description of the file will not fit in the
-allotted room for sparse structures in the header. In other words,
-an extended_header is needed.
-
-The @code{extended_header} structure is used for sparse files which
-need more sparse structures than can fit in the header. The header can
-fit 4 such structures; if more are needed, the flag @code{isextended}
-gets set and the next block is an @code{extended_header}.
-
-Each @code{extended_header} structure contains an array of 21
-sparse structures, along with a similar @code{isextended} flag
-that the header had. There can be an indeterminate number of such
-@code{extended_header}s to describe a sparse file.
+@smallexample
+@group
+$ @kbd{star -t -v -block-number -f arc.tar}
+@dots{}
+star: Unknown extended header keyword 'GNU.sparse.size' ignored.
+star: Unknown extended header keyword 'GNU.sparse.numblocks' ignored.
+star: Unknown extended header keyword 'GNU.sparse.name' ignored.
+star: Unknown extended header keyword 'GNU.sparse.map' ignored.
+block 56: 425984 -rw-r--r-- gray/users Jun 25 14:46 2006 GNUSparseFile.28124/sparsefile
+block 897: 65391 -rw-r--r-- gray/users Jun 24 20:06 2006 README
+@dots{}
+@end group
+@end smallexample
-@table @asis
+@noindent
+(as usual, ignore the warnings about unknown keywords.)
-@item @code{REGTYPE}
-@itemx @code{AREGTYPE}
-These flags represent a regular file. In order to be compatible
-with older versions of @command{tar}, a @code{typeflag} value of
-@code{AREGTYPE} should be silently recognized as a regular file.
-New archives should be created using @code{REGTYPE}. Also, for
-backward compatibility, @command{tar} treats a regular file whose name
-ends with a slash as a directory.
-
-@item @code{LNKTYPE}
-This flag represents a file linked to another file, of any type,
-previously archived. Such files are identified in Unix by each
-file having the same device and inode number. The linked-to name is
-specified in the @code{linkname} field with a trailing null.
-
-@item @code{SYMTYPE}
-This represents a symbolic link to another file. The linked-to name
-is specified in the @code{linkname} field with a trailing null.
-
-@item @code{CHRTYPE}
-@itemx @code{BLKTYPE}
-These represent character special files and block special files
-respectively. In this case the @code{devmajor} and @code{devminor}
-fields will contain the major and minor device numbers respectively.
-Operating systems may map the device specifications to their own
-local specification, or may ignore the entry.
-
-@item @code{DIRTYPE}
-This flag specifies a directory or sub-directory. The directory
-name in the @code{name} field should end with a slash. On systems where
-disk allocation is performed on a directory basis, the @code{size} field
-will contain the maximum number of bytes (which may be rounded to
-the nearest disk block allocation unit) which the directory may
-hold. A @code{size} field of zero indicates no such limiting. Systems
-which do not support limiting in this manner should ignore the
-@code{size} field.
-
-@item @code{FIFOTYPE}
-This specifies a FIFO special file. Note that the archiving of a
-FIFO file archives the existence of this file and not its contents.
-
-@item @code{CONTTYPE}
-This specifies a contiguous file, which is the same as a normal
-file except that, in operating systems which support it, all its
-space is allocated contiguously on the disk. Operating systems
-which do not allow contiguous allocation should silently treat this
-type as a normal file.
-
-@item @code{A} @dots{} @code{Z}
-These are reserved for custom implementations. Some of these are
-used in the @acronym{GNU} modified format, as described below.
+@item
+Let @var{size} be the size of the sparse member, @var{Bs} be its block number
+and @var{Bn} be the block number of the next member.
+Compute:
-@end table
+@smallexample
+@var{N} = @var{Bs} - @var{Bn} - @var{size}/512 - 2
+@end smallexample
-Other values are reserved for specification in future revisions of
-the P1003 standard, and should not be used by any @command{tar} program.
+@noindent
+This number gives the size of the extended header part in tar @dfn{blocks}.
+In our example, this formula gives: @code{897 - 56 - 425984 / 512 - 2
+= 7}.
-The @code{magic} field indicates that this archive was output in
-the P1003 archive format. If this field contains @code{TMAGIC},
-the @code{uname} and @code{gname} fields will contain the ASCII
-representation of the owner and group of the file respectively.
-If found, the user and group IDs are used rather than the values in
-the @code{uid} and @code{gid} fields.
+@item
+Use @command{dd} to extract the headers:
-For references, see ISO/IEC 9945-1:1990 or IEEE Std 1003.1-1990, pages
-169-173 (section 10.1) for @cite{Archive/Interchange File Format}; and
-IEEE Std 1003.2-1992, pages 380-388 (section 4.48) and pages 936-940
-(section E.4.48) for @cite{pax - Portable archive interchange}.
+@smallexample
+@kbd{dd if=@var{archive} of=@var{hname} bs=512 skip=@var{Bs} count=@var{N}}
+@end smallexample
-@node Extensions
-@section @acronym{GNU} Extensions to the Archive Format
-@UNREVISED
+@noindent
+where @var{archive} is the archive name, @var{hname} is a name of the
+file to store the extended header in, @var{Bs} and @var{N} are
+computed in previous steps.
-The @acronym{GNU} format uses additional file types to describe new types of
-files in an archive. These are listed below.
+In our example, this command will be
-@table @code
-@item GNUTYPE_DUMPDIR
-@itemx 'D'
-This represents a directory and a list of files created by the
-@value{op-incremental} option. The @code{size} field gives the total
-size of the associated list of files. Each file name is preceded by
-either a @samp{Y} (the file should be in this archive) or an @samp{N}.
-(The file is a directory, or is not stored in the archive.) Each file
-name is terminated by a null. There is an additional null after the
-last file name.
-
-@item GNUTYPE_MULTIVOL
-@itemx 'M'
-This represents a file continued from another volume of a multi-volume
-archive created with the @value{op-multi-volume} option. The original
-type of the file is not given here. The @code{size} field gives the
-maximum size of this piece of the file (assuming the volume does
-not end before the file is written out). The @code{offset} field
-gives the offset from the beginning of the file where this part of
-the file begins. Thus @code{size} plus @code{offset} should equal
-the original size of the file.
-
-@item GNUTYPE_SPARSE
-@itemx 'S'
-This flag indicates that we are dealing with a sparse file. Note
-that archiving a sparse file requires special operations to find
-holes in the file, which mark the positions of these holes, along
-with the number of bytes of data to be found after the hole.
-
-@item GNUTYPE_VOLHDR
-@itemx 'V'
-This file type is used to mark the volume header that was given with
-the @value{op-label} option when the archive was created. The @code{name}
-field contains the @code{name} given after the @value{op-label} option.
-The @code{size} field is zero. Only the first file in each volume
-of an archive should have this type.
+@smallexample
+$ @kbd{dd if=arc.tar of=xhdr bs=512 skip=56 count=7}
+@end smallexample
+@end enumerate
-@end table
+Finally, you can expand the condensed file, using the obtained header:
-You may have trouble reading a @acronym{GNU} format archive on a
-non-@acronym{GNU} system if the options @value{op-incremental},
-@value{op-multi-volume}, @value{op-sparse}, or @value{op-label} were
-used when writing the archive. In general, if @command{tar} does not
-use the @acronym{GNU}-added fields of the header, other versions of
-@command{tar} should be able to read the archive. Otherwise, the
-@command{tar} program will give an error, the most likely one being a
-checksum error.
+@smallexample
+@group
+$ @kbd{xsparse -v -x xhdr GNUSparseFile.6058/sparsefile}
+Reading extended header file
+Found variable GNU.sparse.size = 217481216
+Found variable GNU.sparse.numblocks = 208
+Found variable GNU.sparse.name = sparsefile
+Found variable GNU.sparse.map = 0,2048,1050624,2048,@dots{}
+Expanding file `GNUSparseFile.28124/sparsefile' to `sparsefile'
+Done
+@end group
+@end smallexample
@node cpio
@section Comparison of @command{tar} and @command{cpio}
@quotation
Is there any differences between the ability to recover crashed
-archives between the two of them. (Is there any chance of recovering
+archives between the two of them. (Is there any chance of recovering
crashed archives at all.)
@end quotation
@section Device Selection and Switching
@UNREVISED
-@table @kbd
+@table @option
@item -f [@var{hostname}:]@var{file}
@itemx --file=[@var{hostname}:]@var{file}
Use archive file or device @var{file} on @var{hostname}.
If the file name contains a @samp{:}, it is interpreted as
@samp{hostname:file name}. If the @var{hostname} contains an @dfn{at}
-sign (@kbd{@@}), it is treated as @samp{user@@hostname:file name}. In
+sign (@samp{@@}), it is treated as @samp{user@@hostname:file name}. In
either case, @command{tar} will invoke the command @command{rsh} (or
-@command{remsh}) to start up an @file{/etc/rmt} on the remote machine. If
-you give an alternate login name, it will be given to the @command{rsh}.
-Naturally, the remote machine must have an executable @file{/etc/rmt}.
-This program is free software from the University of California, and a
-copy of the source code can be found with the sources for @command{tar};
-it's compiled and installed by default.
+@command{remsh}) to start up an @command{/usr/libexec/rmt} on the remote
+machine. If you give an alternate login name, it will be given to the
+@command{rsh}.
+Naturally, the remote machine must have an executable
+@command{/usr/libexec/rmt}. This program is free software from the
+University of California, and a copy of the source code can be found
+with the sources for @command{tar}; it's compiled and installed by default.
+The exact path to this utility is determined when configuring the package.
+It is @file{@var{prefix}/libexec/rmt}, where @var{prefix} stands for
+your installation prefix. This location may also be overridden at
+runtime by using @option{rmt-command=@var{command}} option (@xref{Option Summary,
+---rmt-command}, for detailed description of this option. @xref{Remote
+Tape Server}, for the description of @command{rmt} command).
If this option is not given, but the environment variable @env{TAPE}
is set, its value is used; otherwise, old versions of @command{tar}
too. The installer could also check for @samp{DEFTAPE} in
@file{<sys/mtio.h>}.
-@table @kbd
+@table @option
+@xopindex{force-local, short description}
@item --force-local
Archive file is local even if it contains a colon.
+@opindex rsh-command
@item --rsh-command=@var{command}
Use remote @var{command} instead of @command{rsh}. This option exists
so that people who use something other than the standard @command{rsh}
@item -[0-7][lmh]
Specify drive and density.
+@xopindex{multi-volume, short description}
@item -M
@itemx --multi-volume
Create/list/extract multi-volume archive.
that may be larger than will fit on the medium used to hold it.
@xref{Multi-Volume Archives}.
+@xopindex{tape-length, short description}
@item -L @var{num}
@itemx --tape-length=@var{num}
Change tape after writing @var{num} x 1024 bytes.
detect end of physical tapes. By being slightly conservative on the
maximum tape length, you might avoid the problem entirely.
+@xopindex{info-script, short description}
+@xopindex{new-volume-script, short description}
@item -F @var{file}
@itemx --info-script=@var{file}
@itemx --new-volume-script=@var{file}
-Execute @file{file} at end of each tape. If @file{file} exits with
-nonzero status, exit. This implies @value{op-multi-volume}.
+Execute @file{file} at end of each tape. This implies
+@option{--multi-volume} (@option{-M}). @xref{info-script}, for a detailed
+description of this option.
@end table
@node Remote Tape Server
@pindex rmt
In order to access the tape drive on a remote machine, @command{tar}
uses the remote tape server written at the University of California at
-Berkeley. The remote tape server must be installed as @file{/etc/rmt}
-on any machine whose tape drive you want to use. @command{tar} calls
-@file{/etc/rmt} by running an @command{rsh} or @command{remsh} to the remote
-machine, optionally using a different login name if one is supplied.
+Berkeley. The remote tape server must be installed as
+@file{@var{prefix}/libexec/rmt} on any machine whose tape drive you
+want to use. @command{tar} calls @command{rmt} by running an
+@command{rsh} or @command{remsh} to the remote machine, optionally
+using a different login name if one is supplied.
A copy of the source for the remote tape server is provided. It is
Copyright @copyright{} 1983 by the Regents of the University of
-California, but can be freely distributed. Instructions for compiling
-and installing it are included in the @file{Makefile}.
+California, but can be freely distributed. It is compiled and
+installed by default.
@cindex absolute file names
-Unless you use the @value{op-absolute-names} option, @GNUTAR{}
-will not allow you to create an archive that contains
+Unless you use the @option{--absolute-names} (@option{-P}) option,
+@GNUTAR{} will not allow you to create an archive that contains
absolute file names (a file name beginning with @samp{/}.) If you try,
@command{tar} will automatically remove the leading @samp{/} from the
file names it stores in the archive. It will also type a warning
relative to the current directory. If you want to extract the files in
an archive to the same absolute names that they had when the archive
was created, you should do a @samp{cd /} before extracting the files
-from the archive, or you should either use the @value{op-absolute-names}
+from the archive, or you should either use the @option{--absolute-names}
option, or use the command @samp{tar -C / @dots{}}.
@cindex Ultrix 3.1 and write failure
and industry-standard 9-track magnetic tape (or any other kind of tape
that can be backspaced with the @code{MTIOCTOP} @code{ioctl}.
-This means that the @value{op-append}, @value{op-update},
-@value{op-concatenate}, and @value{op-delete} commands will not work on any
-other kind of file. Some media simply cannot be backspaced, which
-means these commands and options will never be able to work on them.
-These non-backspacing media include pipes and cartridge tape drives.
+This means that the @option{--append}, @option{--concatenate}, and
+@option{--delete} commands will not work on any other kind of file.
+Some media simply cannot be backspaced, which means these commands and
+options will never be able to work on them. These non-backspacing
+media include pipes and cartridge tape drives.
Some other media can be backspaced, and @command{tar} will work on them
once @command{tar} is modified to do so.
-Archives created with the @value{op-multi-volume}, @value{op-label}, and
-@value{op-incremental} options may not be readable by other version
+Archives created with the @option{--multi-volume}, @option{--label}, and
+@option{--incremental} (@option{-G}) options may not be readable by other version
of @command{tar}. In particular, restoring a file that was split over
a volume boundary will require some careful work with @command{dd}, if
it can be done at all. Other versions of @command{tar} may also create
an empty file whose name is that of the volume header. Some versions
of @command{tar} may create normal files instead of directories archived
-with the @value{op-incremental} option.
+with the @option{--incremental} (@option{-G}) option.
@node Common Problems and Solutions
@section Some Common Problems and their Solutions
When writing to tapes, @command{tar} writes the contents of the archive
in chunks known as @dfn{records}. To change the default blocking
-factor, use the @value{op-blocking-factor} option. Each record will
-then be composed of @var{512-size} blocks. (Each @command{tar} block is
-512 bytes. @xref{Standard}.) Each file written to the archive uses
-at least one full record. As a result, using a larger record size
-can result in more wasted space for small files. On the other hand, a
-larger record size can often be read and written much more efficiently.
+factor, use the @option{--blocking-factor=@var{512-size}} (@option{-b
+@var{512-size}}) option. Each record will then be composed of
+@var{512-size} blocks. (Each @command{tar} block is 512 bytes.
+@xref{Standard}.) Each file written to the archive uses at least one
+full record. As a result, using a larger record size can result in
+more wasted space for small files. On the other hand, a larger record
+size can often be read and written much more efficiently.
Further complicating the problem is that some tape drives ignore the
blocking entirely. For these, a larger record size can still improve
print a message about a non-standard blocking factor, and then operate
normally. On some tape devices, however, @command{tar} cannot figure
out the record size itself. On most of those, you can specify a
-blocking factor (with @value{op-blocking-factor}) larger than the
-actual blocking factor, and then use the @value{op-read-full-records}
-option. (If you specify a blocking factor with
-@value{op-blocking-factor} and don't use the
-@value{op-read-full-records} option, then @command{tar} will not
+blocking factor (with @option{--blocking-factor}) larger than the
+actual blocking factor, and then use the @option{--read-full-records}
+(@option{-B}) option. (If you specify a blocking factor with
+@option{--blocking-factor} and don't use the
+@option{--read-full-records} option, then @command{tar} will not
attempt to figure out the recording size itself.) On some devices,
you must always specify the record size exactly with
-@value{op-blocking-factor} when reading, because @command{tar} cannot
-figure it out. In any case, use @value{op-list} before doing any
-extractions to see whether @command{tar} is reading the archive
+@option{--blocking-factor} when reading, because @command{tar} cannot
+figure it out. In any case, use @option{--list} (@option{-t}) before
+doing any extractions to see whether @command{tar} is reading the archive
correctly.
@command{tar} blocks are all fixed size (512 bytes), and its scheme for
In a standard @command{tar} file (no options), the block size is 512
and the record size is 10240, for a blocking factor of 20. What the
-@value{op-blocking-factor} option does is sets the blocking factor,
+@option{--blocking-factor} option does is sets the blocking factor,
changing the record size while leaving the block size at 512 bytes.
20 was fine for ancient 800 or 1600 bpi reel-to-reel tape drives;
most tape drives these days prefer much bigger records in order to
you can use the options described in the following sections.
If you do not specify any format parameters, @command{tar} uses
default parameters. You cannot modify a compressed archive.
-If you create an archive with the @value{op-blocking-factor} option
-specified (@value{pxref-blocking-factor}), you must specify that
+If you create an archive with the @option{--blocking-factor} option
+specified (@pxref{Blocking Factor}), you must specify that
blocking-factor when operating on the archive. @xref{Formats}, for other
examples of format parameter considerations.
@cindex Blocks per record
@UNREVISED
+@opindex blocking-factor
The data in an archive is grouped into blocks, which are 512 bytes.
Blocks are read and written in whole number multiples called
-@dfn{records}. The number of blocks in a record (ie. the size of a
+@dfn{records}. The number of blocks in a record (i.e., the size of a
record in units of 512 bytes) is called the @dfn{blocking factor}.
-The @value{op-blocking-factor} option specifies the blocking factor of
-an archive. The default blocking factor is typically 20 (ie.@:
-10240 bytes), but can be specified at installation. To find out
-the blocking factor of an existing archive, use @samp{tar --list
---file=@var{archive-name}}. This may not work on some devices.
+The @option{--blocking-factor=@var{512-size}} (@option{-b
+@var{512-size}}) option specifies the blocking factor of an archive.
+The default blocking factor is typically 20 (i.e., 10240 bytes), but
+can be specified at installation. To find out the blocking factor of
+an existing archive, use @samp{tar --list --file=@var{archive-name}}.
+This may not work on some devices.
Records are separated by gaps, which waste space on the archive media.
If you are archiving on magnetic tape, using a larger blocking factor
(and therefore larger records) provides faster throughput and allows you
-to fit more data on a tape (because there are fewer gaps). If you are
+to fit more data on a tape (because there are fewer gaps). If you are
archiving on cartridge, a very large blocking factor (say 126 or more)
-greatly increases performance. A smaller blocking factor, on the other
+greatly increases performance. A smaller blocking factor, on the other
hand, may be useful when archiving small files, to avoid archiving lots
of nulls as @command{tar} fills out the archive to the end of the record.
In general, the ideal record size depends on the size of the
must specify the same blocking factor when you modify that archive. Some
archive devices will also require you to specify the blocking factor when
reading that archive, however this is not typically the case. Usually, you
-can use @value{op-list} without specifying a blocking factor---@command{tar}
+can use @option{--list} (@option{-t}) without specifying a blocking factor---@command{tar}
reports a non-default record size and then lists the archive members as
it would normally. To extract files from an archive with a non-standard
blocking factor (particularly if you're not sure what the blocking factor
-is), you can usually use the @value{op-read-full-records} option while
+is), you can usually use the @option{--read-full-records} (@option{-B}) option while
specifying a blocking factor larger then the blocking factor of the archive
-(ie. @samp{tar --extract --read-full-records --blocking-factor=300}.
-@xref{list}, for more information on the @value{op-list}
+(i.e., @samp{tar --extract --read-full-records --blocking-factor=300}.
+@xref{list}, for more information on the @option{--list} (@option{-t})
operation. @xref{Reading}, for a more detailed explanation of that option.
-@table @kbd
+@table @option
@item --blocking-factor=@var{number}
@itemx -b @var{number}
Specifies the blocking factor of an archive. Can be used with any
-operation, but is usually not necessary with @value{op-list}.
+operation, but is usually not necessary with @option{--list} (@option{-t}).
@end table
Device blocking
-@table @kbd
+@table @option
@item -b @var{blocks}
@itemx --blocking-factor=@var{blocks}
Set record size to @math{@var{blocks} * 512} bytes.
the archive is directly handled to a local disk, instead of any special
device,
@item
-@value{op-blocking-factor} is not explicitly specified on the @command{tar}
+@option{--blocking-factor} is not explicitly specified on the @command{tar}
invocation.
@end itemize
@command{tar} should rather drain the pipe out before exiting itself.
@end itemize
+@xopindex{ignore-zeros, short description}
@item -i
@itemx --ignore-zeros
Ignore blocks of zeros in archive (means EOF).
-The @value{op-ignore-zeros} option causes @command{tar} to ignore blocks
+The @option{--ignore-zeros} (@option{-i}) option causes @command{tar} to ignore blocks
of zeros in the archive. Normally a block of zeros indicates the
end of the archive, but when reading a damaged archive, or one which
was created by concatenating several archives together, this option
archive file, which may sometimes avoid problems when multiple files
are stored on a single physical tape.
+@xopindex{read-full-records, short description}
@item -B
@itemx --read-full-records
Reblock as we read (for reading 4.2BSD pipes).
-If @value{op-read-full-records} is used, @command{tar} will not panic if an
-attempt to read a record from the archive does not return a full record.
-Instead, @command{tar} will keep reading until it has obtained a full
+If @option{--read-full-records} is used, @command{tar}
+will not panic if an attempt to read a record from the archive does
+not return a full record. Instead, @command{tar} will keep reading
+until it has obtained a full
record.
This option is turned on by default when @command{tar} is reading
drive unit that will be used to create the archives) sometimes lowers
the error rates observed at rewriting time.
-I might also use @samp{--number-blocks} instead of
-@samp{--block-number}, so @samp{--block} will then expand to
-@samp{--blocking-factor} unambiguously.
+I might also use @option{--number-blocks} instead of
+@option{--block-number}, so @option{--block} will then expand to
+@option{--blocking-factor} unambiguously.
@node Many
@section Many Archives on One Tape
head is on. Before writing an archive, you should make sure that no
data on the tape will be overwritten (unless it is no longer needed).
Before reading an archive, you should make sure the tape head is at
-the beginning of the archive you want to read. (The @code{restore}
-script will find the archive automatically. @FIXME{There is no such
-restore script!}@FIXME-xref{Scripted Restoration}@xref{mt}, for
-an explanation of the tape moving utility.
+the beginning of the archive you want to read. You can do it manually
+via @code{mt} utility (@pxref{mt}). The @code{restore} script does
+that automatically (@pxref{Scripted Restoration}).
If you want to add new archive file entries to a tape, you should
advance the tape to the end of the existing file entries, backspace
@FIXME{Is it true that this only works on non-block devices?
should explain the difference, (fixed or variable).}
-@value{xref-blocking-factor}.
+@xref{Blocking Factor}.
You can use the @command{mt} utility to advance or rewind a tape past a
specified number of archive files on the tape. This will allow you
@FIXME{is there any use for record operations?}
-@table @kbd
+@table @option
@item eof
@itemx weof
Writes @var{number} tape marks at the current position on the tape.
Moves tape position back @var{number} files.
@item rewind
-Rewinds the tape. (Ignores @var{number}).
+Rewinds the tape. (Ignores @var{number}).
@item offline
@itemx rewoff1
-Rewinds the tape and takes the tape device off-line. (Ignores @var{number}).
+Rewinds the tape and takes the tape device off-line. (Ignores @var{number}).
@item status
Prints status information about the tape unit.
@FIXME{Is there a better way to frob the spacing on the list?}
If you don't specify a @var{tapename}, @command{mt} uses the environment
-variable @env{TAPE}; if @env{TAPE} is not set, @command{mt} uses the device
-@file{/dev/rmt12}.
+variable @env{TAPE}; if @env{TAPE} is not set, @command{mt} will use
+the default device specified in your @file{sys/mtio.h} file
+(@code{DEFTAPE} variable). If this is not defined, the program will
+display a descriptive error message and exit with code 1.
@command{mt} returns a 0 exit status when the operation(s) were
successful, 1 if the command was unrecognized, and 2 if an operation
failed.
-@FIXME{New node on how to find an archive?}
-
-If you use @value{op-extract} with the @value{op-label} option specified,
-@command{tar} will read an archive label (the tape head has to be positioned
-on it) and print an error if the archive label doesn't match the
-@var{archive-name} specified. @var{archive-name} can be any regular
-expression. If the labels match, @command{tar} extracts the archive.
-@value{xref-label}.
-@FIXME-xref{Matching Format Parameters}@FIXME{fix cross
-references}@samp{tar --list --label} will cause @command{tar} to print the
-label.
-
-@FIXME{Program to list all the labels on a tape?}
-
@node Using Multiple Tapes
@section Using Multiple Tapes
-@UNREVISED
Often you might want to write a large archive, one larger than will fit
on the actual tape you are using. In such a case, you can run multiple
@command{tar} commands, but this can be inconvenient, particularly if you
-are using options like @value{op-exclude} or dumping entire filesystems.
-Therefore, @command{tar} supports multiple tapes automatically.
-
-Use @value{op-multi-volume} on the command line, and then @command{tar} will,
-when it reaches the end of the tape, prompt for another tape, and
-continue the archive. Each tape will have an independent archive, and
-can be read without needing the other. (As an exception to this, the
-file that @command{tar} was archiving when it ran out of tape will usually
-be split between the two archives; in this case you need to extract from
-the first archive, using @value{op-multi-volume}, and then put in the
-second tape when prompted, so @command{tar} can restore both halves of the
-file.)
-
-@GNUTAR{} multi-volume archives do not use a truly
-portable format. You need @GNUTAR{} at both end to
-process them properly.
+are using options like @option{--exclude=@var{pattern}} or dumping entire file systems.
+Therefore, @command{tar} provides a special mode for creating
+multi-volume archives.
+
+@dfn{Multi-volume} archive is a single @command{tar} archive, stored
+on several media volumes of fixed size. Although in this section we will
+often call @samp{volume} a @dfn{tape}, there is absolutely no
+requirement for multi-volume archives to be stored on tapes. Instead,
+they can use whatever media type the user finds convenient, they can
+even be located on files.
+
+When creating a multi-volume archive, @GNUTAR{} continues to fill
+current volume until it runs out of space, then it switches to
+next volume (usually the operator is queried to replace the tape on
+this point), and continues working on the new volume. This operation
+continues until all requested files are dumped. If @GNUTAR{} detects
+end of media while dumping a file, such a file is archived in split
+form. Some very big files can even be split across several volumes.
+
+Each volume is itself a valid @GNUTAR{} archive, so it can be read
+without any special options. Consequently any file member residing
+entirely on one volume can be extracted or otherwise operated upon
+without needing the other volume. Sure enough, to extract a split
+member you would need all volumes its parts reside on.
+
+Multi-volume archives suffer from several limitations. In particular,
+they cannot be compressed.
+
+@GNUTAR{} is able to create multi-volume archives of two formats
+(@pxref{Formats}): @samp{GNU} and @samp{POSIX}.
+
+@menu
+* Multi-Volume Archives:: Archives Longer than One Tape or Disk
+* Tape Files:: Tape Files
+* Tarcat:: Concatenate Volumes into a Single Archive
+
+@end menu
+
+@node Multi-Volume Archives
+@subsection Archives Longer than One Tape or Disk
+@cindex Multi-volume archives
+
+@opindex multi-volume
+To create an archive that is larger than will fit on a single unit of
+the media, use the @option{--multi-volume} (@option{-M}) option in conjunction with
+the @option{--create} option (@pxref{create}). A @dfn{multi-volume}
+archive can be manipulated like any other archive (provided the
+@option{--multi-volume} option is specified), but is stored on more
+than one tape or disk.
+
+When you specify @option{--multi-volume}, @command{tar} does not report an
+error when it comes to the end of an archive volume (when reading), or
+the end of the media (when writing). Instead, it prompts you to load
+a new storage volume. If the archive is on a magnetic tape, you
+should change tapes when you see the prompt; if the archive is on a
+floppy disk, you should change disks; etc.
+
+@table @option
+@item --multi-volume
+@itemx -M
+Creates a multi-volume archive, when used in conjunction with
+@option{--create} (@option{-c}). To perform any other operation on a multi-volume
+archive, specify @option{--multi-volume} in conjunction with that
+operation.
+For example:
+
+@smallexample
+$ @kbd{tar --create --multi-volume --file=/dev/tape @var{files}}
+@end smallexample
+@end table
+
+The method @command{tar} uses to detect end of tape is not perfect, and
+fails on some operating systems or on some devices. If @command{tar}
+cannot detect the end of the tape itself, you can use
+@option{--tape-length} option to inform it about the capacity of the
+tape:
+
+@anchor{tape-length}
+@table @option
+@opindex tape-length
+@item --tape-length=@var{size}
+@itemx -L @var{size}
+Set maximum length of a volume. The @var{size} argument should then
+be the usable size of the tape in units of 1024 bytes. This option
+selects @option{--multi-volume} automatically. For example:
+
+@smallexample
+$ @kbd{tar --create --tape-length=41943040 --file=/dev/tape @var{files}}
+@end smallexample
+@end table
+
+@anchor{change volume prompt}
+When @GNUTAR{} comes to the end of a storage media, it asks you to
+change the volume. The built-in prompt for POSIX locale
+is@footnote{If you run @GNUTAR{} under a different locale, the
+translation to the locale's language will be used.}:
+
+@smallexample
+Prepare volume #@var{n} for `@var{archive}' and hit return:
+@end smallexample
+
+@noindent
+where @var{n} is the ordinal number of the volume to be created and
+@var{archive} is archive file or device name.
When prompting for a new tape, @command{tar} accepts any of the following
responses:
Request @command{tar} to explain possible responses
@item q
Request @command{tar} to exit immediately.
-@item n @var{file name}
-Request @command{tar} to write the next volume on the file @var{file name}.
+@item n @var{file-name}
+Request @command{tar} to write the next volume on the file @var{file-name}.
@item !
-Request @command{tar} to run a subshell.
+Request @command{tar} to run a subshell. This option can be disabled
+by giving @option{--restrict} command line option to
+@command{tar}@footnote{@xref{--restrict}, for more information about
+this option}.
@item y
Request @command{tar} to begin writing the next volume.
@end table
(You should only type @samp{y} after you have changed the tape;
otherwise @command{tar} will write over the volume it just finished.)
-If you want more elaborate behavior than this, give @command{tar} the
-@value{op-info-script} option. The file @var{script-name} is expected
-to be a program (or shell script) to be run instead of the normal
-prompting procedure. If the program fails, @command{tar} exits;
-otherwise, @command{tar} begins writing the next volume. The behavior
-of the
-@samp{n} response to the normal tape-change prompt is not available
-if you use @value{op-info-script}.
+@cindex Volume number file
+@cindex volno file
+@anchor{volno-file}
+@opindex volno-file
+The volume number used by @command{tar} in its tape-changing prompt
+can be changed; if you give the
+@option{--volno-file=@var{file-of-number}} option, then
+@var{file-of-number} should be an non-existing file to be created, or
+else, a file already containing a decimal number. That number will be
+used as the volume number of the first volume written. When
+@command{tar} is finished, it will rewrite the file with the
+now-current volume number. (This does not change the volume number
+written on a tape label, as per @ref{label}, it @emph{only} affects
+the number used in the prompt.)
+
+@cindex End-of-archive info script
+@cindex Info script
+@anchor{info-script}
+@opindex info-script
+@opindex new-volume-script
+If you want more elaborate behavior than this, you can write a special
+@dfn{new volume script}, that will be responsible for changing the
+volume, and instruct @command{tar} to use it instead of its normal
+prompting procedure:
-The method @command{tar} uses to detect end of tape is not perfect, and
-fails on some operating systems or on some devices. You can use the
-@value{op-tape-length} option if @command{tar} can't detect the end of the
-tape itself. This option selects @value{op-multi-volume} automatically.
-The @var{size} argument should then be the usable size of the tape.
-But for many devices, and floppy disks in particular, this option is
-never required for real, as far as we know.
-
-The volume number used by @command{tar} in its tape-change prompt
-can be changed; if you give the @value{op-volno-file} option, then
-@var{file-of-number} should be an unexisting file to be created, or else,
-a file already containing a decimal number. That number will be used
-as the volume number of the first volume written. When @command{tar} is
-finished, it will rewrite the file with the now-current volume number.
-(This does not change the volume number written on a tape label, as
-per @value{ref-label}, it @emph{only} affects the number used in
-the prompt.)
-
-If you want @command{tar} to cycle through a series of tape drives, then
-you can use the @samp{n} response to the tape-change prompt. This is
-error prone, however, and doesn't work at all with @value{op-info-script}.
-Therefore, if you give @command{tar} multiple @value{op-file} options, then
-the specified files will be used, in sequence, as the successive volumes
-of the archive. Only when the first one in the sequence needs to be
-used again will @command{tar} prompt for a tape change (or run the info
-script).
-
-Multi-volume archives
-
-With @value{op-multi-volume}, @command{tar} will not abort when it cannot
-read or write any more data. Instead, it will ask you to prepare a new
-volume. If the archive is on a magnetic tape, you should change tapes
-now; if the archive is on a floppy disk, you should change disks, etc.
-
-Each volume of a multi-volume archive is an independent @command{tar}
-archive, complete in itself. For example, you can list or extract any
-volume alone; just don't specify @value{op-multi-volume}. However, if one
-file in the archive is split across volumes, the only way to extract
-it successfully is with a multi-volume extract command @samp{--extract
---multi-volume} (@samp{-xM}) starting on or before the volume where
-the file begins.
-
-For example, let's presume someone has two tape drives on a system
-named @file{/dev/tape0} and @file{/dev/tape1}. For having @GNUTAR{}
-to switch to the second drive when it needs to write the
+@table @option
+@item --info-script=@var{script-name}
+@itemx --new-volume-script=@var{script-name}
+@itemx -F @var{script-name}
+Specify the full name of the volume script to use. The script can be
+used to eject cassettes, or to broadcast messages such as
+@samp{Someone please come change my tape} when performing unattended
+backups.
+@end table
+
+The @var{script-name} is executed without any command line
+arguments. It inherits @command{tar}'s shell environment.
+Additional data is passed to it via the following
+environment variables:
+
+@table @env
+@vrindex TAR_VERSION, info script environment variable
+@item TAR_VERSION
+@GNUTAR{} version number.
+
+@vrindex TAR_ARCHIVE, info script environment variable
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_VOLUME, info script environment variable
+@item TAR_VOLUME
+Ordinal number of the volume @command{tar} is about to start.
+
+@vrindex TAR_SUBCOMMAND, info script environment variable
+@item TAR_SUBCOMMAND
+Short option describing the operation @command{tar} is executing
+@xref{Operations}, for a complete list of subcommand options.
+
+@vrindex TAR_FORMAT, info script environment variable
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+@end table
+
+The volume script can instruct @command{tar} to use new archive name,
+by writing in to file descriptor 3 (see below for an example).
+
+If the info script fails, @command{tar} exits; otherwise, it begins
+writing the next volume.
+
+If you want @command{tar} to cycle through a series of files or tape
+drives, there are three approaches to choose from. First of all, you
+can give @command{tar} multiple @option{--file} options. In this case
+the specified files will be used, in sequence, as the successive
+volumes of the archive. Only when the first one in the sequence needs
+to be used again will @command{tar} prompt for a tape change (or run
+the info script). For example, suppose someone has two tape drives on
+a system named @file{/dev/tape0} and @file{/dev/tape1}. For having
+@GNUTAR{} to switch to the second drive when it needs to write the
second tape, and then back to the first tape, etc., just do either of:
@smallexample
$ @kbd{tar cMff /dev/tape0 /dev/tape1 @var{files}}
@end smallexample
-@menu
-* Multi-Volume Archives:: Archives Longer than One Tape or Disk
-* Tape Files:: Tape Files
-@end menu
+The second method is to use the @samp{n} response to the tape-change
+prompt.
-@node Multi-Volume Archives
-@subsection Archives Longer than One Tape or Disk
-@cindex Multi-volume archives
-@UNREVISED
+Finally, the most flexible approach is to use a volume script, that
+writes new archive name to the file descriptor #3. For example, the
+following volume script will create a series of archive files, named
+@file{@var{archive}-@var{vol}}, where @var{archive} is the name of the
+archive being created (as given by @option{--file} option) and
+@var{vol} is the ordinal number of the archive being created:
-To create an archive that is larger than will fit on a single unit of
-the media, use the @value{op-multi-volume} option in conjunction with
-the @value{op-create} option (@pxref{create}). A
-@dfn{multi-volume} archive can be manipulated like any other archive
-(provided the @value{op-multi-volume} option is specified), but is
-stored on more than one tape or disk.
+@smallexample
+@group
+#! /bin/sh
+echo Preparing volume $TAR_VOLUME of $TAR_ARCHIVE.
+
+name=`expr $TAR_ARCHIVE : '\(.*\)-.*'`
+case $TAR_SUBCOMMAND in
+-c) ;;
+-d|-x|-t) test -r $@{name:-$TAR_ARCHIVE@}-$TAR_VOLUME || exit 1
+ ;;
+*) exit 1
+esac
+
+echo $@{name:-$TAR_ARCHIVE@}-$TAR_VOLUME >&3
+@end group
+@end smallexample
-When you specify @value{op-multi-volume}, @command{tar} does not report an
-error when it comes to the end of an archive volume (when reading), or
-the end of the media (when writing). Instead, it prompts you to load
-a new storage volume. If the archive is on a magnetic tape, you
-should change tapes when you see the prompt; if the archive is on a
-floppy disk, you should change disks; etc.
+The same script cant be used while listing, comparing or extracting
+from the created archive. For example:
+
+@smallexample
+@group
+# @r{Create a multi-volume archive:}
+$ @kbd{tar -c -L1024 -f archive.tar -F new-volume .}
+# @r{Extract from the created archive:}
+$ @kbd{tar -x -f archive.tar -F new-volume .}
+@end group
+@end smallexample
+
+@noindent
+Notice, that the first command had to use @option{-L} option, since
+otherwise @GNUTAR{} will end up writing everything to file
+@file{archive.tar}.
You can read each individual volume of a multi-volume archive as if it
were an archive by itself. For example, to list the contents of one
-volume, use @value{op-list}, without @value{op-multi-volume} specified.
+volume, use @option{--list}, without @option{--multi-volume} specified.
To extract an archive member from one volume (assuming it is described
-that volume), use @value{op-extract}, again without
-@value{op-multi-volume}.
+that volume), use @option{--extract}, again without
+@option{--multi-volume}.
-If an archive member is split across volumes (ie. its entry begins on
+If an archive member is split across volumes (i.e., its entry begins on
one volume of the media and ends on another), you need to specify
-@value{op-multi-volume} to extract it successfully. In this case, you
+@option{--multi-volume} to extract it successfully. In this case, you
should load the volume where the archive member starts, and use
@samp{tar --extract --multi-volume}---@command{tar} will prompt for later
volumes as it needs them. @xref{extracting archives}, for more
information about extracting archives.
-@value{op-info-script} is like @value{op-multi-volume}, except that
-@command{tar} does not prompt you directly to change media volumes when
-a volume is full---instead, @command{tar} runs commands you have stored
-in @var{script-name}. For example, this option can be used to eject
-cassettes, or to broadcast messages such as @samp{Someone please come
-change my tape} when performing unattended backups. When @var{script-name}
-is done, @command{tar} will assume that the media has been changed.
-
Multi-volume archives can be modified like any other archive. To add
files to a multi-volume archive, you need to only mount the last
volume of the archive media (and new volumes, if needed). For all
other operations, you need to use the entire archive.
-If a multi-volume archive was labeled using @value{op-label}
-(@value{pxref-label}) when it was created, @command{tar} will not
-automatically label volumes which are added later. To label subsequent
-volumes, specify @value{op-label} again in conjunction with the
-@value{op-append}, @value{op-update} or @value{op-concatenate} operation.
-
-@cindex Labeling multi-volume archives
-@FIXME{example}
-
-@FIXME{There should be a sample program here, including an exit
-before end. Is the exit status even checked in tar? :-(}
-
-@table @kbd
-@item --multi-volume
-@itemx -M
-Creates a multi-volume archive, when used in conjunction with
-@value{op-create}. To perform any other operation on a multi-volume
-archive, specify @value{op-multi-volume} in conjunction with that
-operation.
-
-@item --info-script=@var{program-file}
-@itemx -F @var{program-file}
-Creates a multi-volume archive via a script. Used in conjunction with
-@value{op-create}.
-@end table
+If a multi-volume archive was labeled using
+@option{--label=@var{archive-label}} (@pxref{label}) when it was
+created, @command{tar} will not automatically label volumes which are
+added later. To label subsequent volumes, specify
+@option{--label=@var{archive-label}} again in conjunction with the
+@option{--append}, @option{--update} or @option{--concatenate} operation.
-Beware that there is @emph{no} real standard about the proper way, for
-a @command{tar} archive, to span volume boundaries. If you have a
-multi-volume created by some vendor's @command{tar}, there is almost
-no chance you could read all the volumes with @GNUTAR{}.
-The converse is also true: you may not expect
-multi-volume archives created by @GNUTAR{} to be
-fully recovered by vendor's @command{tar}. Since there is little
-chance that, in mixed system configurations, some vendor's
-@command{tar} will work on another vendor's machine, and there is a
-great chance that @GNUTAR{} will work on most of
-them, your best bet is to install @GNUTAR{} on all
-machines between which you know exchange of files is possible.
+Notice that multi-volume support is a GNU extension and the archives
+created in this mode should be read only using @GNUTAR{}. If you
+absolutely have to process such archives using a third-party @command{tar}
+implementation, read @ref{Split Recovery}.
@node Tape Files
@subsection Tape Files
@UNREVISED
To give the archive a name which will be recorded in it, use the
-@value{op-label} option. This will write a special block identifying
-@var{volume-label} as the name of the archive to the front of the archive
-which will be displayed when the archive is listed with @value{op-list}.
-If you are creating a multi-volume archive with
-@value{op-multi-volume}@FIXME-pxref{Using Multiple Tapes}, then the
-volume label will have
-@samp{Volume @var{nnn}} appended to the name you give, where @var{nnn} is
-the number of the volume of the archive. (If you use the @value{op-label}
-option when reading an archive, it checks to make sure the label on the
-tape matches the one you give. @value{xref-label}.
+@option{--label=@var{volume-label}} (@option{-V @var{volume-label}})
+option. This will write a special block identifying
+@var{volume-label} as the name of the archive to the front of the
+archive which will be displayed when the archive is listed with
+@option{--list}. If you are creating a multi-volume archive with
+@option{--multi-volume} (@pxref{Using Multiple Tapes}), then the
+volume label will have @samp{Volume @var{nnn}} appended to the name
+you give, where @var{nnn} is the number of the volume of the archive.
+(If you use the @option{--label=@var{volume-label}}) option when
+reading an archive, it checks to make sure the label on the tape
+matches the one you give. @xref{label}.
When @command{tar} writes an archive to tape, it creates a single
tape file. If multiple archives are written to the same tape, one
or such, for pushing a common date in all volumes or an archive set.
+@node Tarcat
+@subsection Concatenate Volumes into a Single Archive
+
+@pindex tarcat
+ Sometimes it is necessary to convert existing @GNUTAR{} multi-volume
+archive to a single @command{tar} archive. Simply concatenating all
+volumes into one will not work, since each volume carries an additional
+information at the beginning. @GNUTAR{} is shipped with the shell
+script @command{tarcat} designed for this purpose.
+
+ The script takes a list of files comprising a multi-volume archive
+and creates the resulting archive at the standard output. For example:
+
+@smallexample
+@kbd{tarcat vol.1 vol.2 vol.3 | tar tf -}
+@end smallexample
+
+ The script implements a simple heuristics to determine the format of
+the first volume file and to decide how to process the rest of the
+files. However, it makes no attempt to verify whether the files are
+given in order or even if they are valid @command{tar} archives.
+It uses @command{dd} and does not filter its standard error, so you
+will usually see lots of spurious messages.
+
+@FIXME{The script is not installed. Should we install it?}
+
@node label
@section Including a Label in the Archive
@cindex Labeling an archive
@cindex Labels on the archive media
+@cindex Labeling multi-volume archives
@UNREVISED
-@table @kbd
-@item -V @var{name}
-@itemx --label=@var{name}
-Create archive with volume name @var{name}.
+@opindex label
+ To avoid problems caused by misplaced paper labels on the archive
+media, you can include a @dfn{label} entry---an archive member which
+contains the name of the archive---in the archive itself. Use the
+@option{--label=@var{archive-label}} (@option{-V @var{archive-label}})
+option in conjunction with the @option{--create} operation to include
+a label entry in the archive as it is being created.
+
+@table @option
+@item --label=@var{archive-label}
+@itemx -V @var{archive-label}
+Includes an @dfn{archive-label} at the beginning of the archive when
+the archive is being created, when used in conjunction with the
+@option{--create} operation. Checks to make sure the archive label
+matches the one specified (when used in conjunction with any other
+operation.
@end table
-This option causes @command{tar} to write out a @dfn{volume header} at
-the beginning of the archive. If @value{op-multi-volume} is used, each
-volume of the archive will have a volume header of @samp{@var{name}
+ If you create an archive using both
+@option{--label=@var{archive-label}} (@option{-V @var{archive-label}})
+and @option{--multi-volume} (@option{-M}), each volume of the archive
+will have an archive label of the form @samp{@var{archive-label}
Volume @var{n}}, where @var{n} is 1 for the first volume, 2 for the
-next, and so on.
+next, and so on. @xref{Using Multiple Tapes}, for information on
+creating multiple volume archives.
-@FIXME{Should the arg to --label be a quoted string?? No.}
-
-To avoid problems caused by misplaced paper labels on the archive
-media, you can include a @dfn{label} entry---an archive member which
-contains the name of the archive---in the archive itself. Use the
-@value{op-label} option in conjunction with the @value{op-create} operation
-to include a label entry in the archive as it is being created.
-
-If you create an archive using both @value{op-label} and
-@value{op-multi-volume}, each volume of the archive will have an
-archive label of the form @samp{@var{archive-label} Volume @var{n}},
-where @var{n} is 1 for the first volume, 2 for the next, and so on.
-@FIXME-xref{Multi-Volume Archives, for information on creating multiple
-volume archives.}
-
-If you list or extract an archive using @value{op-label}, @command{tar} will
-print an error if the archive label doesn't match the @var{archive-label}
-specified, and will then not list nor extract the archive. In those cases,
-@var{archive-label} argument is interpreted as a globbing-style pattern
-which must match the actual magnetic volume label. @xref{exclude}, for
-a precise description of how match is attempted@footnote{Previous versions
-of @command{tar} used full regular expression matching, or before that, only
-exact string matching, instead of wildcard matchers. We decided for the
-sake of simplicity to use a uniform matching device through @command{tar}.}.
-If the switch @value{op-multi-volume} is being used, the volume label
-matcher will also suffix @var{archive-label} by @w{@samp{ Volume [1-9]*}}
-if the initial match fails, before giving up. Since the volume numbering
-is automatically added in labels at creation time, it sounded logical to
-equally help the user taking care of it when the archive is being read.
-
-The @value{op-label} was once called @samp{--volume}, but is not available
-under that name anymore.
-
-To find out an archive's label entry (or to find out if an archive has
-a label at all), use @samp{tar --list --verbose}. @command{tar} will
-print the label first, and then print archive member information, as
-in the example below:
+@cindex Volume label, listing
+@cindex Listing volume label
+ The volume label will be displayed by @option{--list} along with
+the file contents. If verbose display is requested, it will also be
+explicitly marked as in the example below:
@smallexample
+@group
$ @kbd{tar --verbose --list --file=iamanarchive}
V--------- 0 0 0 1992-03-07 12:01 iamalabel--Volume Header--
--rw-rw-rw- ringo user 40 1990-05-21 13:30 iamafilename
+-rw-r--r-- ringo user 40 1990-05-21 13:30 iamafilename
+@end group
@end smallexample
-@table @kbd
-@item --label=@var{archive-label}
-@itemx -V @var{archive-label}
-Includes an @dfn{archive-label} at the beginning of the archive when
-the archive is being created, when used in conjunction with the
-@value{op-create} option. Checks to make sure the archive label
-matches the one specified (when used in conjunction with the
-@value{op-extract} option.
-@end table
+@opindex test-label
+@anchor{--test-label option}
+ However, @option{--list} option will cause listing entire
+contents of the archive, which may be undesirable (for example, if the
+archive is stored on a tape). You can request checking only the volume
+by specifying @option{--test-label} option. This option reads only the
+first block of an archive, so it can be used with slow storage
+devices. For example:
+
+@smallexample
+@group
+$ @kbd{tar --test-label --file=iamanarchive}
+iamalabel
+@end group
+@end smallexample
+
+ If @option{--test-label} is used with a single command line
+argument, @command{tar} compares the volume label with the
+argument. It exits with code 0 if the two strings match, and with code
+2 otherwise. In this case no output is displayed. For example:
-To get a common information on all tapes of a series, use the
-@value{op-label} option. For having this information different in each
+@smallexample
+@group
+$ @kbd{tar --test-label --file=iamanarchive 'iamalable'}
+@result{} 0
+$ @kbd{tar --test-label --file=iamanarchive 'iamalable' alabel}
+@result{} 1
+@end group
+@end smallexample
+
+ If you request any operation, other than @option{--create}, along
+with using @option{--label} option, @command{tar} will first check if
+the archive label matches the one specified and will refuse to proceed
+if it does not. Use this as a safety precaution to avoid accidentally
+overwriting existing archives. For example, if you wish to add files
+to @file{archive}, presumably labeled with string @samp{My volume},
+you will get:
+
+@smallexample
+@group
+$ @kbd{tar -rf archive --label 'My volume' .}
+tar: Archive not labeled to match `My volume'
+@end group
+@end smallexample
+
+@noindent
+in case its label does not match. This will work even if
+@file{archive} is not labeled at all.
+
+ Similarly, @command{tar} will refuse to list or extract the
+archive if its label doesn't match the @var{archive-label}
+specified. In those cases, @var{archive-label} argument is interpreted
+as a globbing-style pattern which must match the actual magnetic
+volume label. @xref{exclude}, for a precise description of how match
+is attempted@footnote{Previous versions of @command{tar} used full
+regular expression matching, or before that, only exact string
+matching, instead of wildcard matchers. We decided for the sake of
+simplicity to use a uniform matching device through
+@command{tar}.}. If the switch @option{--multi-volume} (@option{-M}) is being used,
+the volume label matcher will also suffix @var{archive-label} by
+@w{@samp{ Volume [1-9]*}} if the initial match fails, before giving
+up. Since the volume numbering is automatically added in labels at
+creation time, it sounded logical to equally help the user taking care
+of it when the archive is being read.
+
+ The @option{--label} was once called @option{--volume}, but is not
+available under that name anymore.
+
+ You can also use @option{--label} to get a common information on
+all tapes of a series. For having this information different in each
series created through a single script used on a regular basis, just
manage to get some date string as part of the label. For example:
@smallexample
+@group
$ @kbd{tar cfMV /dev/tape "Daily backup for `date +%Y-%m-%d`"}
$ @kbd{tar --create --file=/dev/tape --multi-volume \
--volume="Daily backup for `date +%Y-%m-%d`"}
+@end group
@end smallexample
-Also note that each label has its own date and time, which corresponds
+ Also note that each label has its own date and time, which corresponds
to when @GNUTAR{} initially attempted to write it,
often soon after the operator launches @command{tar} or types the
carriage return telling that the next tape is ready. Comparing date
rewinding tapes and the operator switching them were negligible, which
is usually not the case.
-@FIXME{was --volume}
-
@node verify
@section Verifying Data as It is Stored
@cindex Verifying a write operation
@cindex Double-checking a write operation
-@table @kbd
+@table @option
@item -W
@itemx --verify
+@opindex verify, short description
Attempt to verify the archive after writing.
@end table
operation, or can compare a previously written archive, to insure that
it is up to date.
+@xopindex{verify, using with @option{--create}}
+@xopindex{create, using with @option{--verify}}
To check for discrepancies in an archive immediately after it is
-written, use the @value{op-verify} option in conjunction with
-the @value{op-create} operation. When this option is
+written, use the @option{--verify} (@option{-W}) option in conjunction with
+the @option{--create} operation. When this option is
specified, @command{tar} checks archive members against their counterparts
in the file system, and reports discrepancies on the standard error.
errors on some tapes. Archives written to pipes, some cartridge tape
drives, and some other devices cannot be verified.
-One can explicitly compare an already made archive with the file system
-by using the @value{op-compare} option, instead of using the more automatic
-@value{op-verify} option. @value{xref-compare}.
+One can explicitly compare an already made archive with the file
+system by using the @option{--compare} (@option{--diff}, @option{-d})
+option, instead of using the more automatic @option{--verify} option.
+@xref{compare}.
Note that these two options have a slightly different intent. The
-@value{op-compare} option how identical are the logical contents of some
-archive with what is on your disks, while the @value{op-verify} option is
+@option{--compare} option checks how identical are the logical contents of some
+archive with what is on your disks, while the @option{--verify} option is
really for checking if the physical contents agree and if the recording
-media itself is of dependable quality. So, for the @value{op-verify}
+media itself is of dependable quality. So, for the @option{--verify}
operation, @command{tar} tries to defeat all in-memory cache pertaining to
the archive, while it lets the speed optimization undisturbed for the
-@value{op-compare} option. If you nevertheless use @value{op-compare} for
+@option{--compare} option. If you nevertheless use @option{--compare} for
media verification, you may have to defeat the in-memory cache yourself,
maybe by opening and reclosing the door latch of your recording unit,
forcing some doubt in your operating system about the fact this is really
the same volume as the one just written or read.
-The @value{op-verify} option would not be necessary if drivers were indeed
+The @option{--verify} option would not be necessary if drivers were indeed
able to detect dependably all write failures. This sometimes require many
magnetic heads, some able to read after the writes occurred. One would
not say that drivers unable to detect all cases are necessarily flawed,
as long as programming is concerned.
-The @value{op-verify} option will not work in conjunction with the
-@value{op-multi-volume} option or the @value{op-append},
-@value{op-update} and @value{op-delete} operations. @xref{Operations},
-for more information on these operations.
+The @option{--verify} (@option{-W}) option will not work in
+conjunction with the @option{--multi-volume} (@option{-M}) option or
+the @option{--append} (@option{-r}), @option{--update} (@option{-u})
+and @option{--delete} operations. @xref{Operations}, for more
+information on these operations.
Also, since @command{tar} normally strips leading @samp{/} from file
names (@pxref{absolute}), a command like @samp{tar --verify -cf
which can be removed from the center of a tape reel, or some other
changeable feature.
+@node Changes
+@appendix Changes
+
+This appendix lists some important user-visible changes between
+version @GNUTAR{} @value{VERSION} and previous versions. An up-to-date
+version of this document is available at
+@uref{http://www.gnu.org/@/software/@/tar/manual/changes.html,the
+@GNUTAR{} documentation page}.
+
+@table @asis
+@item Use of globbing patterns when listing and extracting.
+
+Previous versions of GNU tar assumed shell-style globbing when
+extracting from or listing an archive. For example:
+
+@smallexample
+$ @kbd{tar xf foo.tar '*.c'}
+@end smallexample
+
+would extract all files whose names end in @samp{.c}. This behavior
+was not documented and was incompatible with traditional tar
+implementations. Therefore, starting from version 1.15.91, GNU tar
+no longer uses globbing by default. For example, the above invocation
+is now interpreted as a request to extract from the archive the file
+named @file{*.c}.
+
+To facilitate transition to the new behavior for those users who got
+used to the previous incorrect one, @command{tar} will print a warning
+if it finds out that a requested member was not found in the archive
+and its name looks like a globbing pattern. For example:
+
+@smallexample
+$ @kbd{tar xf foo.tar '*.c'}
+tar: Pattern matching characters used in file names. Please,
+tar: use --wildcards to enable pattern matching, or --no-wildcards to
+tar: suppress this warning.
+tar: *.c: Not found in archive
+tar: Error exit delayed from previous errors
+@end smallexample
+
+To treat member names as globbing patterns, use --wildcards option.
+If you want to tar to mimic the behavior of versions prior to 1.15.91,
+add this option to your @env{TAR_OPTIONS} variable.
+
+@xref{wildcards}, for the detailed discussion of the use of globbing
+patterns by @GNUTAR{}.
+
+@item Use of short option @option{-o}.
+
+Earlier versions of @GNUTAR{} understood @option{-o} command line
+option as a synonym for @option{--old-archive}.
+
+@GNUTAR{} starting from version 1.13.90 understands this option as
+a synonym for @option{--no-same-owner}. This is compatible with
+UNIX98 @command{tar} implementations.
+
+However, to facilitate transition, @option{-o} option retains its
+old semantics when it is used with one of archive-creation commands.
+Users are encouraged to use @option{--format=oldgnu} instead.
+
+It is especially important, since versions of @acronym{GNU} Automake
+up to and including 1.8.4 invoke tar with this option to produce
+distribution tarballs. @xref{Formats,v7}, for the detailed discussion
+of this issue and its implications.
+
+@FIXME{Change the first argument to tar-formats when the new Automake is
+out. The proposition to add @anchor{} to the appropriate place of its
+docs was accepted by Automake people --Sergey 2006-05-25}.
+@xref{Options, tar-v7, Changing Automake's Behavior,
+automake, GNU Automake}, for a description on how to use various
+archive formats with @command{automake}.
+
+Future versions of @GNUTAR{} will understand @option{-o} only as a
+synonym for @option{--no-same-owner}.
+
+@item Use of short option @option{-l}
+
+Earlier versions of @GNUTAR{} understood @option{-l} option as a
+synonym for @option{--one-file-system}. Since such usage contradicted
+to UNIX98 specification and harmed compatibility with other
+implementation, it was declared deprecated in version 1.14. However,
+to facilitate transition to its new semantics, it was supported by
+versions 1.15 and 1.15.90. The present use of @option{-l} as a short
+variant of @option{--check-links} was introduced in version 1.15.91.
+
+@item Use of options @option{--portability} and @option{--old-archive}
+
+These options are deprecated. Please use @option{--format=v7} instead.
+
+@item Use of option @option{--posix}
+
+This option is deprecated. Please use @option{--format=posix} instead.
+@end table
+
+@node Configuring Help Summary
+@appendix Configuring Help Summary
+
+Running @kbd{tar --help} displays the short @command{tar} option
+summary (@pxref{help}). This summary is organized by @dfn{groups} of
+semantically close options. The options within each group are printed
+in the following order: a short option, eventually followed by a list
+of corresponding long option names, followed by a short description of
+the option. For example, here is an excerpt from the actual @kbd{tar
+--help} output:
+
+@verbatim
+ Main operation mode:
+
+ -A, --catenate, --concatenate append tar files to an archive
+ -c, --create create a new archive
+ -d, --diff, --compare find differences between archive and
+ file system
+ --delete delete from the archive
+@end verbatim
+
+@vrindex ARGP_HELP_FMT, environment variable
+The exact visual representation of the help output is configurable via
+@env{ARGP_HELP_FMT} environment variable. The value of this variable
+is a comma-separated list of @dfn{format variable} assignments. There
+are two kinds of format variables. An @dfn{offset variable} keeps the
+offset of some part of help output text from the leftmost column on
+the screen. A @dfn{boolean} variable is a flag that toggles some
+output feature on or off. Depending on the type of the corresponding
+variable, there are two kinds of assignments:
+
+@table @asis
+@item Offset assignment
+
+The assignment to an offset variable has the following syntax:
+
+@smallexample
+@var{variable}=@var{value}
+@end smallexample
+
+@noindent
+where @var{variable} is the variable name, and @var{value} is a
+numeric value to be assigned to the variable.
+
+@item Boolean assignment
+
+To assign @code{true} value to a variable, simply put this variable name. To
+assign @code{false} value, prefix the variable name with @samp{no-}. For
+example:
+
+@smallexample
+@group
+# Assign @code{true} value:
+dup-args
+# Assign @code{false} value:
+no-dup-args
+@end group
+@end smallexample
+@end table
+
+Following variables are declared:
+
+@deftypevr {Help Output} boolean dup-args
+If true, arguments for an option are shown with both short and long
+options, even when a given option has both forms, for example:
+
+@smallexample
+ -f ARCHIVE, --file=ARCHIVE use archive file or device ARCHIVE
+@end smallexample
+
+If false, then if an option has both short and long forms, the
+argument is only shown with the long one, for example:
+
+@smallexample
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+@end smallexample
+
+@noindent
+and a message indicating that the argument is applicable to both
+forms is printed below the options. This message can be disabled
+using @code{dup-args-note} (see below).
+
+The default is false.
+@end deftypevr
+
+@deftypevr {Help Output} boolean dup-args-note
+If this variable is true, which is the default, the following notice
+is displayed at the end of the help output:
+
+@quotation
+Mandatory or optional arguments to long options are also mandatory or
+optional for any corresponding short options.
+@end quotation
+
+Setting @code{no-dup-args-note} inhibits this message. Normally, only one of
+variables @code{dup-args} or @code{dup-args-note} should be set.
+@end deftypevr
+
+@deftypevr {Help Output} offset short-opt-col
+Column in which short options start. Default is 2.
+
+@smallexample
+@group
+$ @kbd{tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=short-opt-col=6 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+@end group
+@end smallexample
+@end deftypevr
+
+@deftypevr {Help Output} offset long-opt-col
+Column in which long options start. Default is 6. For example:
+
+@smallexample
+@group
+$ @kbd{tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=long-opt-col=16 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+@end group
+@end smallexample
+@end deftypevr
+
+@deftypevr {Help Output} offset doc-opt-col
+Column in which @dfn{doc options} start. A doc option isn't actually
+an option, but rather an arbitrary piece of documentation that is
+displayed in much the same manner as the options. For example, in
+the description of @option{--format} option:
+
+@smallexample
+@group
+ -H, --format=FORMAT create archive of the given format.
+
+ FORMAT is one of the following:
+
+ gnu GNU tar 1.13.x format
+ oldgnu GNU format as per tar <= 1.12
+ pax POSIX 1003.1-2001 (pax) format
+ posix same as pax
+ ustar POSIX 1003.1-1988 (ustar) format
+ v7 old V7 tar format
+@end group
+@end smallexample
+
+@noindent
+the format names are doc options. Thus, if you set
+@kbd{ARGP_HELP_FMT=doc-opt-col=6} the above part of the help output
+will look as follows:
+
+@smallexample
+@group
+ -H, --format=FORMAT create archive of the given format.
+
+ FORMAT is one of the following:
+
+ gnu GNU tar 1.13.x format
+ oldgnu GNU format as per tar <= 1.12
+ pax POSIX 1003.1-2001 (pax) format
+ posix same as pax
+ ustar POSIX 1003.1-1988 (ustar) format
+ v7 old V7 tar format
+@end group
+@end smallexample
+@end deftypevr
+
+@deftypevr {Help Output} offset opt-doc-col
+Column in which option description starts. Default is 29.
+
+@smallexample
+@group
+$ @kbd{tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=opt-doc-col=19 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE use archive file or device ARCHIVE
+$ @kbd{ARGP_HELP_FMT=opt-doc-col=9 tar --help|grep ARCHIVE}
+ -f, --file=ARCHIVE
+ use archive file or device ARCHIVE
+@end group
+@end smallexample
+
+@noindent
+Notice, that the description starts on a separate line if
+@code{opt-doc-col} value is too small.
+@end deftypevr
+
+@deftypevr {Help Output} offset header-col
+Column in which @dfn{group headers} are printed. A group header is a
+descriptive text preceding an option group. For example, in the
+following text:
+
+@verbatim
+ Main operation mode:
+
+ -A, --catenate, --concatenate append tar files to
+ an archive
+ -c, --create create a new archive
+@end verbatim
+@noindent
+@samp{Main operation mode:} is the group header.
+
+The default value is 1.
+@end deftypevr
+
+@deftypevr {Help Output} offset usage-indent
+Indentation of wrapped usage lines. Affects @option{--usage}
+output. Default is 12.
+@end deftypevr
+
+@deftypevr {Help Output} offset rmargin
+Right margin of the text output. Used for wrapping.
+@end deftypevr
+
+@node Tar Internals
+@appendix Tar Internals
+@include intern.texi
+
+@node Genfile
+@appendix Genfile
+@include genfile.texi
+
@node Free Software Needs Free Documentation
@appendix Free Software Needs Free Documentation
@include freemanuals.texi
@include fdl.texi
+@node Index of Command Line Options
+@appendix Index of Command Line Options
+
+This appendix contains an index of all @GNUTAR{} long command line
+options. The options are listed without the preceding double-dash.
+For a cross-reference of short command line options, @ref{Short Option Summary}.
+
+@printindex op
+
@node Index
@appendix Index