struct link *next;
dev_t dev;
ino_t ino;
- short linkcount;
char name[1];
};
-struct link *linklist = NULL; /* points to first link in list */
+static struct link *linklist; /* points to first link in list */
\f
-/* Base 64 digits; see Internet RFC 2045 Table 1. */
-char const base_64_digits[64] =
-{
- 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M',
- 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z',
- 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm',
- 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
- '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '+', '/'
-};
-#define base_8_digits (base_64_digits + 26 * 2)
-
/* The maximum uintmax_t value that can be represented with DIGITS digits,
assuming that each digit is BITS_PER_DIGIT wide. */
#define MAX_VAL_WITH_DIGITS(digits, bits_per_digit) \
? ((uintmax_t) 1 << ((digits) * (bits_per_digit))) - 1 \
: (uintmax_t) -1)
-/* Convert VALUE to a representation suitable for tar headers,
- using base 1 << BITS_PER_DIGIT.
- Use the digits in DIGIT_CHAR[0] ... DIGIT_CHAR[base - 1].
+/* Convert VALUE to an octal representation suitable for tar headers.
Output to buffer WHERE with size SIZE.
The result is undefined if SIZE is 0 or if VALUE is too large to fit. */
static void
-to_base (uintmax_t value, int bits_per_digit, char const *digit_char,
- char *where, size_t size)
+to_octal (uintmax_t value, char *where, size_t size)
+{
+ uintmax_t v = value;
+ size_t i = size;
+
+ do
+ {
+ where[--i] = '0' + (v & ((1 << LG_8) - 1));
+ v >>= LG_8;
+ }
+ while (i);
+}
+
+/* Convert NEGATIVE VALUE to a base-256 representation suitable for
+ tar headers. NEGATIVE is 1 if VALUE was negative before being cast
+ to uintmax_t, 0 otherwise. Output to buffer WHERE with size SIZE.
+ The result is undefined if SIZE is 0 or if VALUE is too large to
+ fit. */
+
+static void
+to_base256 (int negative, uintmax_t value, char *where, size_t size)
{
uintmax_t v = value;
+ uintmax_t propagated_sign_bits =
+ ((uintmax_t) - negative << (CHAR_BIT * sizeof v - LG_256));
size_t i = size;
- unsigned digit_mask = (1 << bits_per_digit) - 1;
do
{
- where[--i] = digit_char[v & digit_mask];
- v >>= bits_per_digit;
+ where[--i] = v & ((1 << LG_256) - 1);
+ v = propagated_sign_bits | (v >> LG_256);
}
while (i);
}
-/* NEGATIVE is nonzero if VALUE was negative before being cast to
- uintmax_t; its original bitpattern can be deduced from VALSIZE, its
- original size before casting. Convert VALUE to external form,
- using SUBSTITUTE (...) if VALUE won't fit. Output to buffer WHERE
- with size SIZE. TYPE is the kind of value being output (useful for
- diagnostics). Prefer the POSIX format of SIZE - 1 octal digits
- (with leading zero digits), followed by '\0'. If this won't work,
- and if GNU format is allowed, use '+' or '-' followed by SIZE - 1
- base-64 digits. If neither format works, use SUBSTITUTE (...)
- instead. Pass to SUBSTITUTE the address of an 0-or-1 flag
- recording whether the substitute value is negative. */
+/* Convert NEGATIVE VALUE (which was originally of size VALSIZE) to
+ external form, using SUBSTITUTE (...) if VALUE won't fit. Output
+ to buffer WHERE with size SIZE. NEGATIVE is 1 iff VALUE was
+ negative before being cast to uintmax_t; its original bitpattern
+ can be deduced from VALSIZE, its original size before casting.
+ TYPE is the kind of value being output (useful for diagnostics).
+ Prefer the POSIX format of SIZE - 1 octal digits (with leading zero
+ digits), followed by '\0'. If this won't work, and if GNU or
+ OLDGNU format is allowed, use '\200' followed by base-256, or (if
+ NEGATIVE is nonzero) '\377' followed by two's complement base-256.
+ If neither format works, use SUBSTITUTE (...) instead. Pass to
+ SUBSTITUTE the address of an 0-or-1 flag recording whether the
+ substitute value is negative. */
static void
to_chars (int negative, uintmax_t value, size_t valsize,
uintmax_t (*substitute) PARAMS ((int *)),
char *where, size_t size, const char *type)
{
- uintmax_t v = negative ? -value : value;
+ int base256_allowed = (archive_format == GNU_FORMAT
+ || archive_format == OLDGNU_FORMAT);
/* Generate the POSIX octal representation if the number fits. */
- if (! negative && v <= MAX_VAL_WITH_DIGITS (size - 1, LG_8))
+ if (! negative && value <= MAX_VAL_WITH_DIGITS (size - 1, LG_8))
{
where[size - 1] = '\0';
- to_base (v, LG_8, base_8_digits, where, size - 1);
+ to_octal (value, where, size - 1);
}
- /* Otherwise, generate the GNU base-64 representation if we are
+ /* Otherwise, generate the base-256 representation if we are
generating an old or new GNU format and if the number fits. */
- else if (v <= MAX_VAL_WITH_DIGITS (size - 1, LG_64)
- && (archive_format == GNU_FORMAT
- || archive_format == OLDGNU_FORMAT))
+ else if (((negative ? -1 - value : value)
+ <= MAX_VAL_WITH_DIGITS (size - 1, LG_256))
+ && base256_allowed)
{
- where[0] = negative ? '-' : '+';
- to_base (v, LG_64, base_64_digits, where + 1, size - 1);
+ where[0] = negative ? -1 : 1 << (LG_256 - 1);
+ to_base256 (negative, value, where + 1, size - 1);
}
/* Otherwise, if the number is negative, and if it would not cause
But this is the traditional behavior. */
else if (negative && valsize * CHAR_BIT <= (size - 1) * LG_8)
{
+ static int warned_once;
+ if (! warned_once)
+ {
+ warned_once = 1;
+ WARN ((0, 0, _("Generating negative octal headers")));
+ }
where[size - 1] = '\0';
- to_base (value & MAX_VAL_WITH_DIGITS (valsize * CHAR_BIT, 1),
- LG_8, base_8_digits, where, size - 1);
+ to_octal (value & MAX_VAL_WITH_DIGITS (valsize * CHAR_BIT, 1),
+ where, size - 1);
}
/* Otherwise, output a substitute value if possible (with a
warning), and an error message if not. */
else
{
- uintmax_t maxval = (archive_format == GNU_FORMAT
- ? MAX_VAL_WITH_DIGITS (size - 1, LG_64)
+ uintmax_t maxval = (base256_allowed
+ ? MAX_VAL_WITH_DIGITS (size - 1, LG_256)
: MAX_VAL_WITH_DIGITS (size - 1, LG_8));
- char buf1[UINTMAX_STRSIZE_BOUND + 1];
- char buf2[UINTMAX_STRSIZE_BOUND + 1];
- char buf3[UINTMAX_STRSIZE_BOUND + 1];
- char *value_string = STRINGIFY_BIGINT (v, buf1 + 1);
- char *maxval_string = STRINGIFY_BIGINT (maxval, buf2 + 1);
- char const *minval_string =
- (archive_format == GNU_FORMAT
- ? "0"
- : (maxval_string[-1] = '-', maxval_string - 1));
+ char valbuf[UINTMAX_STRSIZE_BOUND + 1];
+ char maxbuf[UINTMAX_STRSIZE_BOUND];
+ char minbuf[UINTMAX_STRSIZE_BOUND + 1];
+ char const *minval_string;
+ char const *maxval_string = STRINGIFY_BIGINT (maxval, maxbuf);
+ char const *value_string;
+
+ if (base256_allowed)
+ {
+ uintmax_t m = maxval + 1 ? maxval + 1 : maxval / 2 + 1;
+ char *p = STRINGIFY_BIGINT (m, minbuf + 1);
+ *--p = '-';
+ minval_string = p;
+ }
+ else
+ minval_string = "0";
+
if (negative)
- *--value_string = '-';
+ {
+ char *p = STRINGIFY_BIGINT (- value, valbuf + 1);
+ *--p = '-';
+ value_string = p;
+ }
+ else
+ value_string = STRINGIFY_BIGINT (value, valbuf);
+
if (substitute)
{
int negsub;
uintmax_t sub = substitute (&negsub) & maxval;
- uintmax_t s = (negsub &= archive_format == GNU_FORMAT) ? -sub : sub;
- char *sub_string = STRINGIFY_BIGINT (s, buf3 + 1);
+ uintmax_t s = (negsub &= archive_format == GNU_FORMAT) ? - sub : sub;
+ char subbuf[UINTMAX_STRSIZE_BOUND + 1];
+ char *sub_string = STRINGIFY_BIGINT (s, subbuf + 1);
if (negsub)
*--sub_string = '-';
- WARN ((0, 0, _("%s value %s out of range %s..%s; substituting %s"),
- type, value_string, minval_string, maxval_string,
+ WARN ((0, 0, _("value %s out of %s range %s..%s; substituting %s"),
+ value_string, type, minval_string, maxval_string,
sub_string));
- to_chars (negsub, s, valsize, NULL, where, size, type);
+ to_chars (negsub, s, valsize, 0, where, size, type);
}
else
- ERROR ((0, 0, _("%s value %s out of range %s..%s"),
- type, value_string, minval_string, maxval_string));
+ ERROR ((0, 0, _("value %s out of %s range %s..%s"),
+ value_string, type, minval_string, maxval_string));
}
}
void
major_to_chars (major_t v, char *p, size_t s)
{
- to_chars (v < 0, (uintmax_t) v, sizeof v, NULL, p, s, "major_t");
+ to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "major_t");
}
void
minor_to_chars (minor_t v, char *p, size_t s)
{
- to_chars (v < 0, (uintmax_t) v, sizeof v, NULL, p, s, "minor_t");
+ to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "minor_t");
}
void
mode_to_chars (mode_t v, char *p, size_t s)
{
/* In the common case where the internal and external mode bits are the same,
+ and we are not using POSIX or GNU format,
propagate all unknown bits to the external mode.
This matches historical practice.
Otherwise, just copy the bits we know about. */
if (S_ISUID == TSUID && S_ISGID == TSGID && S_ISVTX == TSVTX
&& S_IRUSR == TUREAD && S_IWUSR == TUWRITE && S_IXUSR == TUEXEC
&& S_IRGRP == TGREAD && S_IWGRP == TGWRITE && S_IXGRP == TGEXEC
- && S_IROTH == TOREAD && S_IWOTH == TOWRITE && S_IXOTH == TOEXEC)
+ && S_IROTH == TOREAD && S_IWOTH == TOWRITE && S_IXOTH == TOEXEC
+ && archive_format != POSIX_FORMAT
+ && archive_format != GNU_FORMAT)
{
negative = v < 0;
u = v;
| (v & S_IWOTH ? TOWRITE : 0)
| (v & S_IXOTH ? TOEXEC : 0));
}
- to_chars (negative, u, sizeof v, NULL, p, s, "mode_t");
+ to_chars (negative, u, sizeof v, 0, p, s, "mode_t");
}
void
off_to_chars (off_t v, char *p, size_t s)
{
- to_chars (v < 0, (uintmax_t) v, sizeof v, NULL, p, s, "off_t");
+ to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "off_t");
}
void
size_to_chars (size_t v, char *p, size_t s)
{
- to_chars (0, (uintmax_t) v, sizeof v, NULL, p, s, "size_t");
+ to_chars (0, (uintmax_t) v, sizeof v, 0, p, s, "size_t");
}
void
time_to_chars (time_t v, char *p, size_t s)
{
- to_chars (v < 0, (uintmax_t) v, sizeof v, NULL, p, s, "time_t");
+ to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "time_t");
}
static uintmax_t
void
uintmax_to_chars (uintmax_t v, char *p, size_t s)
{
- to_chars (0, v, sizeof v, NULL, p, s, "uintmax_t");
+ to_chars (0, v, sizeof v, 0, p, s, "uintmax_t");
}
\f
/* Writing routines. */
\f
/* Header handling. */
-/*---------------------------------------------------------------------.
-| Make a header block for the file name whose stat info is st. Return |
-| header pointer for success, NULL if the name is too long. |
-`---------------------------------------------------------------------*/
+/* Make a header block for the file whose stat info is st,
+ and return its address. */
static union block *
start_header (const char *name, struct stat *st)
}
}
- /* Check the file name and put it in the block. */
-
- if (strlen (name) >= (size_t) NAME_FIELD_SIZE)
+ if (sizeof header->header.name <= strlen (name))
write_long (name, GNUTYPE_LONGNAME);
header = find_next_block ();
memset (header->buffer, 0, sizeof (union block));
int sum;
char *p;
- memcpy (header->header.chksum, CHKBLANKS, sizeof (header->header.chksum));
+ memcpy (header->header.chksum, CHKBLANKS, sizeof header->header.chksum);
sum = 0;
p = header->buffer;
- for (i = sizeof (*header); i-- != 0; )
+ for (i = sizeof *header; i-- != 0; )
/* We can't use unsigned char here because of old compilers, e.g. V7. */
sum += 0xFF & *p++;
uintmax_to_chars ((uintmax_t) sum, header->header.chksum, 7);
- set_next_block_after (header);
-
if (verbose_option
&& header->header.typeflag != GNUTYPE_LONGLINK
&& header->header.typeflag != GNUTYPE_LONGNAME)
current_format = archive_format;
print_header ();
}
+
+ set_next_block_after (header);
}
\f
/* Sparse file processing. */
/* Make room for our scratch space -- initially is 10 elts long. */
- sparsearray = (struct sp_array *)
- xmalloc (sp_array_size * sizeof (struct sp_array));
+ sparsearray = xmalloc (sp_array_size * sizeof (struct sp_array));
for (counter = 0; counter < sp_array_size; counter++)
{
sparsearray[counter].offset = 0;
if (sparse_index > sp_array_size - 1)
{
-
- sparsearray = (struct sp_array *)
+ sparsearray =
xrealloc (sparsearray,
2 * sp_array_size * sizeof (struct sp_array));
sp_array_size *= 2;
while (p = name_from_list (), p)
if (!excluded_name (p))
- dump_file (p, (dev_t) -1, 1);
+ dump_file (p, -1, (dev_t) 0);
blank_name_list ();
while (p = name_from_list (), p)
if (*q == 'Y')
{
strcpy (bufp, q + 1);
- dump_file (buffer, (dev_t) -1, 1);
+ dump_file (buffer, -1, (dev_t) 0);
}
}
free (buffer);
{
while (p = name_next (1), p)
if (!excluded_name (p))
- dump_file (p, (dev_t) -1, 1);
+ dump_file (p, 1, (dev_t) 0);
}
write_eot ();
close_archive ();
if (listed_incremental_option)
- write_dir_file ();
+ write_directory_file ();
}
-/*----------------------------------------------------------------------.
-| Dump a single file. Recurse on directories. Result is nonzero for |
-| success. P is file name to dump. PARENT_DEVICE is device our parent |
-| directory was on. TOP_LEVEL tells wether we are a toplevel call. |
-| |
-| Sets global CURRENT_STAT to stat output for this file. |
-`----------------------------------------------------------------------*/
+/* Dump a single file, recursing on directories. P is the file name
+ to dump. TOP_LEVEL tells whether this is a top-level call; zero
+ means no, positive means yes, and negative means an incremental
+ dump. PARENT_DEVICE is the device of P's
+ parent directory; it is examined only if TOP_LEVEL is zero.
+
+ Set global CURRENT_STAT to stat output for this file. */
/* FIXME: One should make sure that for *every* path leading to setting
exit_status to failure, a clear diagnostic has been issued. */
void
-dump_file (char *p, dev_t parent_device, int top_level)
+dump_file (char *p, int top_level, dev_t parent_device)
{
union block *header;
char type;
union block *exhdr;
char save_typeflag;
+ time_t original_ctime;
struct utimbuf restore_times;
- off_t restore_size;
/* FIXME: `header' and `upperbound' might be used uninitialized in this
function. Reported by Bruno Haible. */
if (interactive_option && !confirm ("add", p))
return;
- /* Use stat if following (rather than dumping) 4.2BSD's symbolic links.
- Otherwise, use lstat (which falls back to stat if no symbolic links). */
-
- if (dereference_option != 0
-#if STX_HIDDEN && !_LARGE_FILES /* AIX */
- ? statx (p, ¤t_stat, STATSIZE, STX_HIDDEN)
- : statx (p, ¤t_stat, STATSIZE, STX_HIDDEN | STX_LINK)
-#else
- ? stat (p, ¤t_stat) : lstat (p, ¤t_stat)
-#endif
- )
+ if (deref_stat (dereference_option, p, ¤t_stat) != 0)
{
WARN ((0, errno, _("Cannot add file %s"), p));
if (!ignore_failed_read_option)
return;
}
+ original_ctime = current_stat.st_ctime;
restore_times.actime = current_stat.st_atime;
restore_times.modtime = current_stat.st_mtime;
- restore_size = current_stat.st_size;
#ifdef S_ISHIDDEN
if (S_ISHIDDEN (current_stat.st_mode))
/* See if we want only new files, and check if this one is too old to
put in the archive. */
- if ((!incremental_option || listed_incremental_option)
+ if ((0 < top_level || !incremental_option)
&& !S_ISDIR (current_stat.st_mode)
&& current_stat.st_mtime < newer_mtime_option
&& (!after_date_option || current_stat.st_ctime < newer_ctime_option))
{
- if (!listed_incremental_option && parent_device == (dev_t) -1)
+ if (0 < top_level)
WARN ((0, 0, _("%s: is unchanged; not dumped"), p));
/* FIXME: recheck this return. */
return;
}
#endif
- /* Check for multiple links.
-
- We maintain a list of all such files that we've written so far. Any
- time we see another, we check the list and avoid dumping the data
- again if we've done it once already. */
-
- if (current_stat.st_nlink > 1
- && (S_ISREG (current_stat.st_mode)
- || S_ISCTG (current_stat.st_mode)
- || S_ISCHR (current_stat.st_mode)
- || S_ISBLK (current_stat.st_mode)
- || S_ISFIFO (current_stat.st_mode)))
- {
- struct link *lp;
-
- /* FIXME: First quick and dirty. Hashing, etc later. */
-
- for (lp = linklist; lp; lp = lp->next)
- if (lp->ino == current_stat.st_ino && lp->dev == current_stat.st_dev)
- {
- char *link_name = lp->name;
-
- /* We found a link. */
-
- while (!absolute_names_option && *link_name == '/')
- {
- static int warned_once;
- if (!warned_once)
- {
- warned_once = 1;
- WARN ((0, 0, _("Removing leading `/' from link names")));
- }
- link_name++;
- }
- if (strlen (link_name) >= NAME_FIELD_SIZE)
- write_long (link_name, GNUTYPE_LONGLINK);
- assign_string (¤t_link_name, link_name);
-
- current_stat.st_size = 0;
- header = start_header (p, ¤t_stat);
- if (header == NULL)
- {
- exit_status = TAREXIT_FAILURE;
- return;
- }
- strncpy (header->header.linkname,
- link_name, NAME_FIELD_SIZE);
-
- /* Force null truncated. */
-
- header->header.linkname[NAME_FIELD_SIZE - 1] = 0;
-
- header->header.typeflag = LNKTYPE;
- finish_header (header);
-
- /* FIXME: Maybe remove from list after all links found? */
-
- if (remove_files_option)
- if (unlink (p) == -1)
- ERROR ((0, errno, _("Cannot remove %s"), p));
-
- /* We dumped it. */
- return;
- }
-
- /* Not found. Add it to the list of possible links. */
-
- lp = (struct link *)
- xmalloc ((size_t) (sizeof (struct link) + strlen (p)));
- lp->ino = current_stat.st_ino;
- lp->dev = current_stat.st_dev;
- strcpy (lp->name, p);
- lp->next = linklist;
- linklist = lp;
- }
-
- /* This is not a link to a previously dumped file, so dump it. */
-
- if (S_ISREG (current_stat.st_mode)
- || S_ISCTG (current_stat.st_mode))
- {
- int f; /* file descriptor */
- size_t bufsize;
- ssize_t count;
- off_t sizeleft;
- union block *start;
- int header_moved;
- char isextended = 0;
- int upperbound;
-#if 0
- static int cried_once = 0;
-#endif
-
- header_moved = 0;
-
- if (sparse_option)
- {
- /* Check the size of the file against the number of blocks
- allocated for it, counting both data and indirect blocks.
- If there is a smaller number of blocks that would be
- necessary to accommodate a file of this size, this is safe
- to say that we have a sparse file: at least one of those
- blocks in the file is just a useless hole. For sparse
- files not having more hole blocks than indirect blocks, the
- sparseness will go undetected. */
-
- /* Bruno Haible sent me these statistics for Linux. It seems
- that some filesystems count indirect blocks in st_blocks,
- while others do not seem to:
-
- minix-fs tar: size=7205, st_blocks=18 and ST_NBLOCKS=18
- extfs tar: size=7205, st_blocks=18 and ST_NBLOCKS=18
- ext2fs tar: size=7205, st_blocks=16 and ST_NBLOCKS=16
- msdos-fs tar: size=7205, st_blocks=16 and ST_NBLOCKS=16
-
- Dick Streefland reports the previous numbers as misleading,
- because ext2fs use 12 direct blocks, while minix-fs uses only
- 6 direct blocks. Dick gets:
-
- ext2 size=20480 ls listed blocks=21
- minix size=20480 ls listed blocks=21
- msdos size=20480 ls listed blocks=20
-
- It seems that indirect blocks *are* included in st_blocks.
- The minix filesystem does not account for phantom blocks in
- st_blocks, so `du' and `ls -s' give wrong results. So, the
- --sparse option would not work on a minix filesystem. */
-
- if (ST_NBLOCKS (current_stat)
- < (current_stat.st_size / ST_NBLOCKSIZE
- + (current_stat.st_size % ST_NBLOCKSIZE != 0)))
- {
- off_t filesize = current_stat.st_size;
- int counter;
-
- header = start_header (p, ¤t_stat);
- if (header == NULL)
- {
- exit_status = TAREXIT_FAILURE;
- return;
- }
- header->header.typeflag = GNUTYPE_SPARSE;
- header_moved = 1;
-
- /* Call the routine that figures out the layout of the
- sparse file in question. UPPERBOUND is the index of the
- last element of the "sparsearray," i.e., the number of
- elements it needed to describe the file. */
-
- upperbound = deal_with_sparse (p, header);
-
- /* See if we'll need an extended header later. */
-
- if (upperbound > SPARSES_IN_OLDGNU_HEADER - 1)
- header->oldgnu_header.isextended = 1;
-
- /* We store the "real" file size so we can show that in
- case someone wants to list the archive, i.e., tar tvf
- <file>. It might be kind of disconcerting if the
- shrunken file size was the one that showed up. */
-
- OFF_TO_CHARS (current_stat.st_size,
- header->oldgnu_header.realsize);
-
- /* This will be the new "size" of the file, i.e., the size
- of the file minus the blocks of holes that we're
- skipping over. */
-
- find_new_file_size (&filesize, upperbound);
- current_stat.st_size = filesize;
- OFF_TO_CHARS (filesize, header->header.size);
-
- for (counter = 0; counter < SPARSES_IN_OLDGNU_HEADER; counter++)
- {
- if (!sparsearray[counter].numbytes)
- break;
-
- OFF_TO_CHARS (sparsearray[counter].offset,
- header->oldgnu_header.sp[counter].offset);
- SIZE_TO_CHARS (sparsearray[counter].numbytes,
- header->oldgnu_header.sp[counter].numbytes);
- }
-
- }
- }
- else
- upperbound = SPARSES_IN_OLDGNU_HEADER - 1;
-
- sizeleft = current_stat.st_size;
-
- /* Don't bother opening empty, world readable files. Also do not open
- files when archive is meant for /dev/null. */
-
- if (dev_null_output
- || (sizeleft == 0
- && MODE_R == (MODE_R & current_stat.st_mode)))
- f = -1;
- else
- {
- f = open (p, O_RDONLY | O_BINARY);
- if (f < 0)
- {
- WARN ((0, errno, _("Cannot add file %s"), p));
- if (!ignore_failed_read_option)
- exit_status = TAREXIT_FAILURE;
- return;
- }
- }
-
- /* If the file is sparse, we've already taken care of this. */
-
- if (!header_moved)
- {
- header = start_header (p, ¤t_stat);
- if (header == NULL)
- {
- if (f >= 0)
- close (f);
- exit_status = TAREXIT_FAILURE;
- return;
- }
- }
-
- /* Mark contiguous files, if we support them. */
-
- if (archive_format != V7_FORMAT && S_ISCTG (current_stat.st_mode))
- header->header.typeflag = CONTTYPE;
-
- isextended = header->oldgnu_header.isextended;
- save_typeflag = header->header.typeflag;
- finish_header (header);
- if (isextended)
- {
-#if 0
- int sum = 0;
-#endif
- int counter;
-#if 0
- union block *exhdr;
- int arraybound = SPARSES_IN_SPARSE_HEADER;
-#endif
- /* static */ int index_offset = SPARSES_IN_OLDGNU_HEADER;
-
- extend:
- exhdr = find_next_block ();
-
- if (exhdr == NULL)
- {
- exit_status = TAREXIT_FAILURE;
- return;
- }
- memset (exhdr->buffer, 0, BLOCKSIZE);
- for (counter = 0; counter < SPARSES_IN_SPARSE_HEADER; counter++)
- {
- if (counter + index_offset > upperbound)
- break;
-
- SIZE_TO_CHARS (sparsearray[counter + index_offset].numbytes,
- exhdr->sparse_header.sp[counter].numbytes);
- OFF_TO_CHARS (sparsearray[counter + index_offset].offset,
- exhdr->sparse_header.sp[counter].offset);
- }
- set_next_block_after (exhdr);
-#if 0
- sum += counter;
- if (sum < upperbound)
- goto extend;
-#endif
- if (index_offset + counter <= upperbound)
- {
- index_offset += counter;
- exhdr->sparse_header.isextended = 1;
- goto extend;
- }
-
- }
- if (save_typeflag == GNUTYPE_SPARSE)
- {
- if (f < 0
- || finish_sparse_file (f, &sizeleft, current_stat.st_size, p))
- goto padit;
- }
- else
- while (sizeleft > 0)
- {
- if (multi_volume_option)
- {
- assign_string (&save_name, p);
- save_sizeleft = sizeleft;
- save_totsize = current_stat.st_size;
- }
- start = find_next_block ();
-
- bufsize = available_space_after (start);
-
- if (sizeleft < bufsize)
- {
- /* Last read -- zero out area beyond. */
-
- bufsize = sizeleft;
- count = bufsize % BLOCKSIZE;
- if (count)
- memset (start->buffer + sizeleft, 0,
- (size_t) (BLOCKSIZE - count));
- }
- if (f < 0)
- count = bufsize;
- else
- count = safe_read (f, start->buffer, bufsize);
- if (count < 0)
- {
- char buf[UINTMAX_STRSIZE_BOUND];
- ERROR ((0, errno,
- _("Read error at byte %s, reading %lu bytes, in file %s"),
- STRINGIFY_BIGINT (current_stat.st_size - sizeleft,
- buf),
- (unsigned long) bufsize, p));
- goto padit;
- }
- sizeleft -= count;
-
- /* This is nonportable (the type of set_next_block_after's arg). */
-
- set_next_block_after (start + (count - 1) / BLOCKSIZE);
-
- if (count == bufsize)
- continue;
- else
- {
- char buf[UINTMAX_STRSIZE_BOUND];
- ERROR ((0, 0,
- _("File %s shrunk by %s bytes, padding with zeros"),
- p, STRINGIFY_BIGINT (sizeleft, buf)));
- goto padit; /* short read */
- }
- }
-
- if (multi_volume_option)
- assign_string (&save_name, NULL);
-
- if (f >= 0)
- {
- struct stat final_stat;
- if (fstat (f, &final_stat) != 0)
- ERROR ((0, errno, "%s: fstat", p));
- else if (final_stat.st_mtime != restore_times.modtime
- || final_stat.st_size != restore_size)
- ERROR ((0, errno, _("%s: file changed as we read it"), p));
- if (close (f) != 0)
- ERROR ((0, errno, _("%s: close"), p));
- if (atime_preserve_option)
- utime (p, &restore_times);
- }
- if (remove_files_option)
- {
- if (unlink (p) == -1)
- ERROR ((0, errno, _("Cannot remove %s"), p));
- }
- return;
-
- /* File shrunk or gave error, pad out tape to match the size we
- specified in the header. */
-
- padit:
- while (sizeleft > 0)
- {
- save_sizeleft = sizeleft;
- start = find_next_block ();
- memset (start->buffer, 0, BLOCKSIZE);
- set_next_block_after (start);
- sizeleft -= BLOCKSIZE;
- }
- if (multi_volume_option)
- assign_string (&save_name, NULL);
- if (f >= 0)
- {
- close (f);
- if (atime_preserve_option)
- utime (p, &restore_times);
- }
- return;
- }
-
-#ifdef HAVE_READLINK
- else if (S_ISLNK (current_stat.st_mode))
- {
- int size;
- char *buffer = (char *) alloca (PATH_MAX + 1);
-
- size = readlink (p, buffer, PATH_MAX + 1);
- if (size < 0)
- {
- WARN ((0, errno, _("Cannot add file %s"), p));
- if (!ignore_failed_read_option)
- exit_status = TAREXIT_FAILURE;
- return;
- }
- buffer[size] = '\0';
- if (size >= NAME_FIELD_SIZE)
- write_long (buffer, GNUTYPE_LONGLINK);
- assign_string (¤t_link_name, buffer);
-
- current_stat.st_size = 0; /* force 0 size on symlink */
- header = start_header (p, ¤t_stat);
- if (header == NULL)
- {
- exit_status = TAREXIT_FAILURE;
- return;
- }
- strncpy (header->header.linkname, buffer, NAME_FIELD_SIZE);
- header->header.linkname[NAME_FIELD_SIZE - 1] = '\0';
- header->header.typeflag = SYMTYPE;
- finish_header (header); /* nothing more to do to it */
- if (remove_files_option)
- {
- if (unlink (p) == -1)
- ERROR ((0, errno, _("Cannot remove %s"), p));
- }
- return;
- }
-#endif
-
- else if (S_ISDIR (current_stat.st_mode))
+ if (S_ISDIR (current_stat.st_mode))
{
DIR *directory;
struct dirent *entry;
namebuf[len++] = '/';
namebuf[len] = '\0';
- if (1)
+ if (! is_avoided_name (namebuf))
{
- /* The "1" above used to be "archive_format != V7_FORMAT", GNU tar
- was just not writing directory blocks at all. Daniel Trinkle
+ /* The condition above used to be "archive_format != V7_FORMAT".
+ GNU tar was not writing directory blocks at all. Daniel Trinkle
writes: ``All old versions of tar I have ever seen have
correctly archived an empty directory. The really old ones I
checked included HP-UX 7 and Mt. Xinu More/BSD. There may be
files, we'd better put the / on the name. */
header = start_header (namebuf, ¤t_stat);
- if (header == NULL)
- {
- exit_status = TAREXIT_FAILURE;
- return; /* eg name too long */
- }
if (incremental_option)
header->header.typeflag = GNUTYPE_DUMPDIR;
bufsize = sizeleft;
count = bufsize % BLOCKSIZE;
if (count)
- memset (start->buffer + sizeleft, 0,
- (size_t) (BLOCKSIZE - count));
+ memset (start->buffer + sizeleft, 0, BLOCKSIZE - count);
}
memcpy (start->buffer, p_buffer, bufsize);
sizeleft -= bufsize;
set_next_block_after (start + (bufsize - 1) / BLOCKSIZE);
}
if (multi_volume_option)
- assign_string (&save_name, NULL);
+ assign_string (&save_name, 0);
if (atime_preserve_option)
utime (p, &restore_times);
return;
/* Now output all the files in the directory. */
- errno = 0; /* FIXME: errno should be read-only */
+ errno = 0;
directory = opendir (p);
if (!directory)
if ((int) NAMLEN (entry) + len >= buflen)
{
buflen = len + NAMLEN (entry);
- namebuf = (char *) xrealloc (namebuf, buflen + 1);
-#if 0
- namebuf[len] = '\0';
- ERROR ((0, 0, _("File name %s%s too long"),
- namebuf, entry->d_name));
- continue;
-#endif
+ namebuf = xrealloc (namebuf, buflen + 1);
}
strcpy (namebuf + len, entry->d_name);
if (!excluded_name (namebuf))
- dump_file (namebuf, our_device, 0);
+ dump_file (namebuf, 0, our_device);
}
closedir (directory);
utime (p, &restore_times);
return;
}
-
- else if (S_ISCHR (current_stat.st_mode))
- type = CHRTYPE;
- else if (S_ISBLK (current_stat.st_mode))
- type = BLKTYPE;
- else if (S_ISFIFO (current_stat.st_mode)
- || S_ISSOCK (current_stat.st_mode))
- type = FIFOTYPE;
+ else if (is_avoided_name (p))
+ return;
else
- goto unknown;
+ {
+ /* Check for multiple links.
+
+ We maintain a list of all such files that we've written so far. Any
+ time we see another, we check the list and avoid dumping the data
+ again if we've done it once already. */
+
+ if (1 < current_stat.st_nlink)
+ {
+ struct link *lp;
+
+ /* FIXME: First quick and dirty. Hashing, etc later. */
+
+ for (lp = linklist; lp; lp = lp->next)
+ if (lp->ino == current_stat.st_ino
+ && lp->dev == current_stat.st_dev)
+ {
+ char *link_name = lp->name;
+
+ /* We found a link. */
+
+ while (!absolute_names_option && *link_name == '/')
+ {
+ static int warned_once;
+ if (!warned_once)
+ {
+ warned_once = 1;
+ WARN ((0, 0,
+ _("Removing leading `/' from link names")));
+ }
+ link_name++;
+ }
+ if (strlen (link_name) >= NAME_FIELD_SIZE)
+ write_long (link_name, GNUTYPE_LONGLINK);
+ assign_string (¤t_link_name, link_name);
+
+ current_stat.st_size = 0;
+ header = start_header (p, ¤t_stat);
+ strncpy (header->header.linkname,
+ link_name, NAME_FIELD_SIZE);
+
+ /* Force null truncated. */
+
+ header->header.linkname[NAME_FIELD_SIZE - 1] = 0;
+
+ header->header.typeflag = LNKTYPE;
+ finish_header (header);
+
+ /* FIXME: Maybe remove from list after all links found? */
+
+ if (remove_files_option)
+ if (unlink (p) == -1)
+ ERROR ((0, errno, _("Cannot remove %s"), p));
+
+ /* We dumped it. */
+ return;
+ }
+
+ /* Not found. Add it to the list of possible links. */
+
+ lp = xmalloc (sizeof (struct link) + strlen (p));
+ lp->ino = current_stat.st_ino;
+ lp->dev = current_stat.st_dev;
+ strcpy (lp->name, p);
+ lp->next = linklist;
+ linklist = lp;
+ }
+
+ /* This is not a link to a previously dumped file, so dump it. */
+
+ if (S_ISREG (current_stat.st_mode)
+ || S_ISCTG (current_stat.st_mode))
+ {
+ int f; /* file descriptor */
+ size_t bufsize;
+ ssize_t count;
+ off_t sizeleft;
+ union block *start;
+ int header_moved;
+ char isextended = 0;
+ int upperbound;
+
+ header_moved = 0;
+
+ if (sparse_option)
+ {
+ /* Check the size of the file against the number of blocks
+ allocated for it, counting both data and indirect blocks.
+ If there is a smaller number of blocks that would be
+ necessary to accommodate a file of this size, this is safe
+ to say that we have a sparse file: at least one of those
+ blocks in the file is just a useless hole. For sparse
+ files not having more hole blocks than indirect blocks, the
+ sparseness will go undetected. */
+
+ /* Bruno Haible sent me these statistics for Linux. It seems
+ that some filesystems count indirect blocks in st_blocks,
+ while others do not seem to:
+
+ minix-fs tar: size=7205, st_blocks=18 and ST_NBLOCKS=18
+ extfs tar: size=7205, st_blocks=18 and ST_NBLOCKS=18
+ ext2fs tar: size=7205, st_blocks=16 and ST_NBLOCKS=16
+ msdos-fs tar: size=7205, st_blocks=16 and ST_NBLOCKS=16
+
+ Dick Streefland reports the previous numbers as misleading,
+ because ext2fs use 12 direct blocks, while minix-fs uses only
+ 6 direct blocks. Dick gets:
+
+ ext2 size=20480 ls listed blocks=21
+ minix size=20480 ls listed blocks=21
+ msdos size=20480 ls listed blocks=20
+
+ It seems that indirect blocks *are* included in st_blocks.
+ The minix filesystem does not account for phantom blocks in
+ st_blocks, so `du' and `ls -s' give wrong results. So, the
+ --sparse option would not work on a minix filesystem. */
+
+ if (ST_NBLOCKS (current_stat)
+ < (current_stat.st_size / ST_NBLOCKSIZE
+ + (current_stat.st_size % ST_NBLOCKSIZE != 0)))
+ {
+ off_t filesize = current_stat.st_size;
+ int counter;
+
+ header = start_header (p, ¤t_stat);
+ header->header.typeflag = GNUTYPE_SPARSE;
+ header_moved = 1;
+
+ /* Call the routine that figures out the layout of the
+ sparse file in question. UPPERBOUND is the index of the
+ last element of the "sparsearray," i.e., the number of
+ elements it needed to describe the file. */
+
+ upperbound = deal_with_sparse (p, header);
+
+ /* See if we'll need an extended header later. */
+
+ if (upperbound > SPARSES_IN_OLDGNU_HEADER - 1)
+ header->oldgnu_header.isextended = 1;
+
+ /* We store the "real" file size so we can show that in
+ case someone wants to list the archive, i.e., tar tvf
+ <file>. It might be kind of disconcerting if the
+ shrunken file size was the one that showed up. */
+
+ OFF_TO_CHARS (current_stat.st_size,
+ header->oldgnu_header.realsize);
+
+ /* This will be the new "size" of the file, i.e., the size
+ of the file minus the blocks of holes that we're
+ skipping over. */
+
+ find_new_file_size (&filesize, upperbound);
+ current_stat.st_size = filesize;
+ OFF_TO_CHARS (filesize, header->header.size);
+
+ for (counter = 0; counter < SPARSES_IN_OLDGNU_HEADER; counter++)
+ {
+ if (!sparsearray[counter].numbytes)
+ break;
+
+ OFF_TO_CHARS (sparsearray[counter].offset,
+ header->oldgnu_header.sp[counter].offset);
+ SIZE_TO_CHARS (sparsearray[counter].numbytes,
+ header->oldgnu_header.sp[counter].numbytes);
+ }
+
+ }
+ }
+ else
+ upperbound = SPARSES_IN_OLDGNU_HEADER - 1;
+
+ sizeleft = current_stat.st_size;
+
+ /* Don't bother opening empty, world readable files. Also do not open
+ files when archive is meant for /dev/null. */
+
+ if (dev_null_output
+ || (sizeleft == 0
+ && MODE_R == (MODE_R & current_stat.st_mode)))
+ f = -1;
+ else
+ {
+ f = open (p, O_RDONLY | O_BINARY);
+ if (f < 0)
+ {
+ if (! top_level && errno == ENOENT)
+ WARN ((0, 0, _("%s: file removed before we read it"), p));
+ else
+ WARN ((0, errno, _("Cannot add file %s"), p));
+ if (!ignore_failed_read_option)
+ exit_status = TAREXIT_FAILURE;
+ return;
+ }
+ }
+
+ /* If the file is sparse, we've already taken care of this. */
+
+ if (!header_moved)
+ header = start_header (p, ¤t_stat);
+
+ /* Mark contiguous files, if we support them. */
+
+ if (archive_format != V7_FORMAT && S_ISCTG (current_stat.st_mode))
+ header->header.typeflag = CONTTYPE;
+
+ isextended = header->oldgnu_header.isextended;
+ save_typeflag = header->header.typeflag;
+ finish_header (header);
+ if (isextended)
+ {
+ int counter;
+ /* static */ int index_offset = SPARSES_IN_OLDGNU_HEADER;
+
+ extend:
+ exhdr = find_next_block ();
+ memset (exhdr->buffer, 0, BLOCKSIZE);
+ for (counter = 0; counter < SPARSES_IN_SPARSE_HEADER; counter++)
+ {
+ if (counter + index_offset > upperbound)
+ break;
+
+ SIZE_TO_CHARS (sparsearray[counter + index_offset].numbytes,
+ exhdr->sparse_header.sp[counter].numbytes);
+ OFF_TO_CHARS (sparsearray[counter + index_offset].offset,
+ exhdr->sparse_header.sp[counter].offset);
+ }
+ set_next_block_after (exhdr);
+ if (index_offset + counter <= upperbound)
+ {
+ index_offset += counter;
+ exhdr->sparse_header.isextended = 1;
+ goto extend;
+ }
+
+ }
+ if (save_typeflag == GNUTYPE_SPARSE)
+ {
+ if (f < 0
+ || finish_sparse_file (f, &sizeleft, current_stat.st_size, p))
+ goto padit;
+ }
+ else
+ while (sizeleft > 0)
+ {
+ if (multi_volume_option)
+ {
+ assign_string (&save_name, p);
+ save_sizeleft = sizeleft;
+ save_totsize = current_stat.st_size;
+ }
+ start = find_next_block ();
+
+ bufsize = available_space_after (start);
+
+ if (sizeleft < bufsize)
+ {
+ /* Last read -- zero out area beyond. */
+
+ bufsize = sizeleft;
+ count = bufsize % BLOCKSIZE;
+ if (count)
+ memset (start->buffer + sizeleft, 0, BLOCKSIZE - count);
+ }
+ if (f < 0)
+ count = bufsize;
+ else
+ count = safe_read (f, start->buffer, bufsize);
+ if (count < 0)
+ {
+ char buf[UINTMAX_STRSIZE_BOUND];
+ ERROR ((0, errno,
+ _("Read error at byte %s, reading %lu bytes, in file %s"),
+ STRINGIFY_BIGINT (current_stat.st_size - sizeleft,
+ buf),
+ (unsigned long) bufsize, p));
+ goto padit;
+ }
+ sizeleft -= count;
+
+ /* This is nonportable (the type of set_next_block_after's arg). */
+
+ set_next_block_after (start + (count - 1) / BLOCKSIZE);
+
+ if (count == bufsize)
+ continue;
+ else
+ {
+ char buf[UINTMAX_STRSIZE_BOUND];
+ ERROR ((0, 0,
+ _("File %s shrunk by %s bytes, padding with zeros"),
+ p, STRINGIFY_BIGINT (sizeleft, buf)));
+ goto padit; /* short read */
+ }
+ }
+
+ if (multi_volume_option)
+ assign_string (&save_name, 0);
+
+ if (f >= 0)
+ {
+ struct stat final_stat;
+ if (fstat (f, &final_stat) != 0)
+ ERROR ((0, errno, "%s: fstat", p));
+ else if (final_stat.st_ctime != original_ctime)
+ ERROR ((0, 0, _("%s: file changed as we read it"), p));
+ if (close (f) != 0)
+ ERROR ((0, errno, _("%s: close"), p));
+ if (atime_preserve_option)
+ utime (p, &restore_times);
+ }
+ if (remove_files_option)
+ {
+ if (unlink (p) == -1)
+ ERROR ((0, errno, _("Cannot remove %s"), p));
+ }
+ return;
+
+ /* File shrunk or gave error, pad out tape to match the size we
+ specified in the header. */
+
+ padit:
+ while (sizeleft > 0)
+ {
+ save_sizeleft = sizeleft;
+ start = find_next_block ();
+ memset (start->buffer, 0, BLOCKSIZE);
+ set_next_block_after (start);
+ sizeleft -= BLOCKSIZE;
+ }
+ if (multi_volume_option)
+ assign_string (&save_name, 0);
+ if (f >= 0)
+ {
+ close (f);
+ if (atime_preserve_option)
+ utime (p, &restore_times);
+ }
+ return;
+ }
+#ifdef HAVE_READLINK
+ else if (S_ISLNK (current_stat.st_mode))
+ {
+ int size;
+ char *buffer = (char *) alloca (PATH_MAX + 1);
+
+ size = readlink (p, buffer, PATH_MAX + 1);
+ if (size < 0)
+ {
+ WARN ((0, errno, _("Cannot add file %s"), p));
+ if (!ignore_failed_read_option)
+ exit_status = TAREXIT_FAILURE;
+ return;
+ }
+ buffer[size] = '\0';
+ if (size >= NAME_FIELD_SIZE)
+ write_long (buffer, GNUTYPE_LONGLINK);
+ assign_string (¤t_link_name, buffer);
+
+ current_stat.st_size = 0; /* force 0 size on symlink */
+ header = start_header (p, ¤t_stat);
+ strncpy (header->header.linkname, buffer, NAME_FIELD_SIZE);
+ header->header.linkname[NAME_FIELD_SIZE - 1] = '\0';
+ header->header.typeflag = SYMTYPE;
+ finish_header (header); /* nothing more to do to it */
+ if (remove_files_option)
+ {
+ if (unlink (p) == -1)
+ ERROR ((0, errno, _("Cannot remove %s"), p));
+ }
+ return;
+ }
+#endif
+ else if (S_ISCHR (current_stat.st_mode))
+ type = CHRTYPE;
+ else if (S_ISBLK (current_stat.st_mode))
+ type = BLKTYPE;
+ else if (S_ISFIFO (current_stat.st_mode)
+ || S_ISSOCK (current_stat.st_mode))
+ type = FIFOTYPE;
+#ifdef S_ISDOOR
+ else if (S_ISDOOR (current_stat.st_mode))
+ {
+ WARN ((0, 0, _("%s: door ignored"), p));
+ return;
+ }
+#endif
+ else
+ goto unknown;
+ }
if (archive_format == V7_FORMAT)
goto unknown;
current_stat.st_size = 0; /* force 0 size */
header = start_header (p, ¤t_stat);
- if (header == NULL)
- {
- exit_status = TAREXIT_FAILURE;
- return; /* eg name too long */
- }
-
header->header.typeflag = type;
if (type != FIFOTYPE)