X-Git-Url: https://git.brokenzipper.com/gitweb?a=blobdiff_plain;ds=sidebyside;f=README;h=8871b30b22cb06e5103f51c4e50fcebc4a4f5c7a;hb=f4e4adea80a;hp=d8c88a85796d3edd04e5b0796cebeea422049134;hpb=afec2899542bafa4815f1b1e1c8e98ab3a37654b;p=chaz%2Ftar
diff --git a/README b/README
index d8c88a8..8871b30 100644
--- a/README
+++ b/README
@@ -1,3 +1,8 @@
+README for GNU tar
+See the end of file for copying conditions.
+
+* Introduction
+
Please glance through *all* sections of this
`README' file before starting configuration. Also make sure you read files
`ABOUT-NLS' and `INSTALL' if you are not familiar with them already.
@@ -25,9 +30,15 @@ See file `THANKS' for a list of contributors.
Besides those configure options documented in files `INSTALL' and
`ABOUT-NLS', an extra option may be accepted after `./configure':
-* `--disable-largefile' omits support for large files, even if the
-operating system supports large files. Typically, large files are
-those larger on 2 GB on a 32-bit host.
+* Install
+
+** Selecting the default archive format.
+
+The default archive format is GNU, this can be overridden by
+presetting DEFAULT_ARCHIVE_FORMAT while configuring. The allowed
+values are GNU, V7, OLDGNU, USTAR and POSIX.
+
+** Selecting the default archive device
The default archive device is now `stdin' on read and `stdout' on write.
The installer can still override this by presetting `DEFAULT_ARCHIVE'
@@ -35,34 +46,45 @@ in the environment before configuring (the behavior of `-[0-7]' or
`-[0-7]lmh' options in `tar' are then derived automatically). Similarly,
`DEFAULT_BLOCKING' can be preset to something else than 20.
-For comprehensive modifications to GNU tar, you might need tools beyond
-those used in simple installations. Fully install GNU m4 1.4 first,
-and only then, Autoconf 2.13 or later. Install Perl, then Automake
-1.4 or later. You might need Bison 1.28 or later, and GNU tar itself.
-All are available on GNU archive sites, like in
-ftp://ftp.gnu.org/pub/gnu/.
+** Selecting full pathname of the "rmt" binary.
-Send bug reports to `bug-tar@gnu.org'. (Beware, old-timers: it is
-`@gnu', not `@prep'; and not `bug-gnu-utils' anymore.) A bug report is
-an adequate description of the problem: your input, what you expected,
-what you got, and why this is wrong. Diffs are welcome, but they only
-describe a solution, from which the problem might be uneasy to infer.
-If needed, submit actual data files with your report. Small data files
-are preferred. Big files may sometimes be necessary, but do not send them
-to the report address; rather take special arrangement with the maintainer.
+Previous versions of tar always looked for "rmt" binary in the
+directory "/etc/rmt". However, the "rmt" program included
+in the distribution was installed under "$prefix/libexec/rmt".
+To fix this discrepancy, tar now looks for "$prefix/libexec/rmt".
+If you do not want this behavior, specify full path name of
+"rmt" binary using DEFAULT_RMT_DIR variable, e.g.:
-Your feedback will help us to make a better and more portable package.
-Consider documentation errors as bugs, and report them as such. If you
-develop anything pertaining to `tar' or have suggestions, let us know
-and share your findings by writing at `tar-forum@iro.umontreal.ca'.
+./configure DEFAULT_RMT_DIR=/etc
+
+If you already have a copy of "rmt" installed and wish to use it
+instead of the version supplied with the distribution, use --with-rmt
+option:
+
+./configure --with-rmt=/etc/rmt
+
+This will also disable building the included version of rmt.
+
+** Installing backup scripts.
+
+This version of tar is shipped with the shell scripts for producing
+incremental backups (dumps) and restoring filesystems from them.
+The name of the backup script is "backup". The name of the
+restore script is "restore". They are installed in "$prefix/sbin"
+directory.
+
+Use option --enable-backup-scripts to compile and install these
+scripts.
+
+** `--disable-largefile' omits support for large files, even if the
+operating system supports large files. Typically, large files are
+those larger on 2 GB on a 32-bit host.
-.--------------------.
-| Installation hints |
-`--------------------'
+* Installation hints
Here are a few hints which might help installing `tar' on some systems.
-* gzip and bzip2.
+** gzip and bzip2.
GNU tar uses the gzip and bzip2 programs to read and write compressed
archives. If you don't have these programs already, you need to
@@ -78,22 +100,23 @@ If you see the following symptoms:
tar: Child returned status 2
then you have encountered a gzip incompatibility that should be fixed
-in gzip 1.3, which is not yet available as of this writing. You can
-work around the incompatibility by using a shell command like
-`gzip -d . You can work around the
+incompatibility by using a shell command like
+ `gzip -d is not found (Slackware).
-* OPENStep 4.2 swap files
+** OPENStep 4.2 swap files
Tar cannot read the file /private/vm/swapfile.front (even as root).
This file is not a real file, but some kind of uncompressed view of
the real compressed swap file; there is no reason to back it up, so
the simplest workaround is to avoid tarring this file.
-.------------------.
-| Special topics. |
-`------------------'
+* Special topics
Here are a few special matters about GNU `tar', not related to build
matters. See previous section for such.
-* File attributes.
+** File attributes.
About *security*, it is probable that future releases of `tar' will have
some behavior changed. There are many pending suggestions to choose from.
@@ -154,19 +175,77 @@ implement flavors of symbolic links showing different behavior and
properties. We did not successfully sorted all these out yet. Currently,
the `lchown' call will be used if available, but that's all.
-* POSIX compliance.
+** POSIX compliance.
-GNU `tar' implements an early draft of the POSIX 1003.1 `ustar' standard
-which is different from the final standard. This will be progressively
-corrected over the incoming few years. Don't be mislead by the mere
-existence of the --posix option. Later releases will become able to
-read truly POSIX archives, and also to produce them under option. (Also,
-if you look at the internals, don't take the GNU extensions you see for
-granted, as they are planned to change.) GNU tar 2.0 will produce POSIX
-archives by default, but there is a long way before we get there.
+GNU `tar' is able to create archive in the following formats:
+
+ *** The format of UNIX version 7
+ *** POSIX.1-1988 format, also known as "ustar format"
+ *** POSIX.1-2001 format, also known as "pax format"
+ *** Old GNU format (described below)
+
+In addition to those, GNU `tar' is also able to read archives
+produced by `star' archiver.
+
+A so called `Old GNU' format is based on an early draft of the
+POSIX 1003.1 `ustar' standard which is different from the final
+standard. It defines its extensions (such as incremental backups
+and handling of the long file names) in a way incompatible with
+any existing tar archive format, therefore the use of old GNU
+format is strongly discouraged.
+
+Please read the file NEWS for more information about POSIX compliance
+and new `tar' features.
* What's next?
-In the future we will try to release tar-1.14 as soon as possible and
-start merging with paxutils afterwards. We'll also try to rewrite
-some parts of the documentation after paxutils has been merged.
+GNU tar will be merged into GNU paxutils: a project containing
+several utilities related to creating and handling archives in
+various formats. The project will include tar, cpio and pax
+utilities.
+
+* Bug reporting.
+
+Send bug reports to . A bug report should contain
+an adequate description of the problem, your input, what you expected,
+what you got, and why this is wrong. Diffs are welcome, but they only
+describe a solution, from which the problem might be uneasy to infer.
+If needed, submit actual data files with your report. Small data files
+are preferred. Big files may sometimes be necessary, but do not send them
+to the report address; rather take special arrangement with the maintainer.
+
+Your feedback will help us to make a better and more portable package.
+Consider documentation errors as bugs, and report them as such. If you
+develop anything pertaining to `tar' or have suggestions, let us know
+and share your findings by writing to .
+
+
+* Copying
+
+ Copyright (C) 1990, 1991, 1992, 1994, 1997, 1998, 1999, 2000,
+ 2001, 2003, 2004 Free Software Foundation, Inc.
+
+ This file is part of GNU tar.
+
+ GNU tar is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ GNU tar is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with tar; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+
+Local Variables:
+mode: outline
+paragraph-separate: "[ ]*$"
+version-control: never
+End:
+