--- /dev/null
+/* Functions for communicating with a remote tape drive.
+ Copyright (C) 1988, 1992 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* The man page rmt(8) for /etc/rmt documents the remote mag tape
+ protocol which rdump and rrestore use. Unfortunately, the man
+ page is *WRONG*. The author of the routines I'm including originally
+ wrote his code just based on the man page, and it didn't work, so he
+ went to the rdump source to figure out why. The only thing he had to
+ change was to check for the 'F' return code in addition to the 'E',
+ and to separate the various arguments with \n instead of a space. I
+ personally don't think that this is much of a problem, but I wanted to
+ point it out. -- Arnold Robbins
+
+ Originally written by Jeff Lee, modified some by Arnold Robbins.
+ Redone as a library that can replace open, read, write, etc., by
+ Fred Fish, with some additional work by Arnold Robbins.
+ Modified to make all rmtXXX calls into macros for speed by Jay Fenlason.
+ Use -DUSE_REXEC for rexec code, courtesy of Dan Kegel, srs!dan. */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <signal.h>
+
+#ifndef NO_MTIO
+#include <sys/ioctl.h>
+#include <sys/mtio.h>
+#endif
+
+#ifdef USE_REXEC
+#include <netdb.h>
+#endif
+
+#include <errno.h>
+#include <setjmp.h>
+#include <sys/stat.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+/* Maximum size of a fully qualified host name. */
+#define MAXHOSTLEN 257
+
+/* Size of buffers for reading and writing commands to rmt.
+ (An arbitrary limit.) */
+#define CMDBUFSIZE 64
+
+#ifndef RETSIGTYPE
+#define RETSIGTYPE void
+#endif
+
+/* Maximum number of simultaneous remote tape connections.
+ (Another arbitrary limit.) */
+#define MAXUNIT 4
+
+/* Return the parent's read side of remote tape connection FILDES. */
+#define READ(fildes) (from_rmt[fildes][0])
+
+/* Return the parent's write side of remote tape connection FILDES. */
+#define WRITE(fildes) (to_rmt[fildes][1])
+
+/* The pipes for receiving data from remote tape drives. */
+static int from_rmt[MAXUNIT][2] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* The pipes for sending data to remote tape drives. */
+static int to_rmt[MAXUNIT][2] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Temporary variable used by macros in rmt.h. */
+char *__rmt_path;
+\f
+/* Close remote tape connection FILDES. */
+
+static void
+_rmt_shutdown (fildes)
+ int fildes;
+{
+ close (READ (fildes));
+ close (WRITE (fildes));
+ READ (fildes) = -1;
+ WRITE (fildes) = -1;
+}
+
+/* Attempt to perform the remote tape command specified in BUF
+ on remote tape connection FILDES.
+ Return 0 if successful, -1 on error. */
+
+static int
+command (fildes, buf)
+ int fildes;
+ char *buf;
+{
+ register int buflen;
+ RETSIGTYPE (*pipe_handler) ();
+
+ /* Save the current pipe handler and try to make the request. */
+
+ pipe_handler = signal (SIGPIPE, SIG_IGN);
+ buflen = strlen (buf);
+ if (write (WRITE (fildes), buf, buflen) == buflen)
+ {
+ signal (SIGPIPE, pipe_handler);
+ return 0;
+ }
+
+ /* Something went wrong. Close down and go home. */
+
+ signal (SIGPIPE, pipe_handler);
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+}
+
+/* Read and return the status from remote tape connection FILDES.
+ If an error occurred, return -1 and set errno. */
+
+static int
+status (fildes)
+ int fildes;
+{
+ int i;
+ char c, *cp;
+ char buffer[CMDBUFSIZE];
+
+ /* Read the reply command line. */
+
+ for (i = 0, cp = buffer; i < CMDBUFSIZE; i++, cp++)
+ {
+ if (read (READ (fildes), cp, 1) != 1)
+ {
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+ }
+ if (*cp == '\n')
+ {
+ *cp = '\0';
+ break;
+ }
+ }
+
+ if (i == CMDBUFSIZE)
+ {
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+ }
+
+ /* Check the return status. */
+
+ for (cp = buffer; *cp; cp++)
+ if (*cp != ' ')
+ break;
+
+ if (*cp == 'E' || *cp == 'F')
+ {
+ errno = atoi (cp + 1);
+ /* Skip the error message line. */
+ while (read (READ (fildes), &c, 1) == 1)
+ if (c == '\n')
+ break;
+
+ if (*cp == 'F')
+ _rmt_shutdown (fildes);
+
+ return -1;
+ }
+
+ /* Check for mis-synced pipes. */
+
+ if (*cp != 'A')
+ {
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+ }
+
+ /* Got an `A' (success) response. */
+ return atoi (cp + 1);
+}
+
+#ifdef USE_REXEC
+/* Execute /etc/rmt as user USER on remote system HOST using rexec.
+ Return a file descriptor of a bidirectional socket for stdin and stdout.
+ If USER is NULL, or an empty string, use the current username.
+
+ By default, this code is not used, since it requires that
+ the user have a .netrc file in his/her home directory, or that the
+ application designer be willing to have rexec prompt for login and
+ password info. This may be unacceptable, and .rhosts files for use
+ with rsh are much more common on BSD systems. */
+
+static int
+_rmt_rexec (host, user)
+ char *host;
+ char *user;
+{
+ struct servent *rexecserv;
+ int save_stdin = dup (fileno (stdin));
+ int save_stdout = dup (fileno (stdout));
+ int tape_fd; /* Return value. */
+
+ /* When using cpio -o < filename, stdin is no longer the tty.
+ But the rexec subroutine reads the login and the passwd on stdin,
+ to allow remote execution of the command.
+ So, reopen stdin and stdout on /dev/tty before the rexec and
+ give them back their original value after. */
+ if (freopen ("/dev/tty", "r", stdin) == NULL)
+ freopen ("/dev/null", "r", stdin);
+ if (freopen ("/dev/tty", "w", stdout) == NULL)
+ freopen ("/dev/null", "w", stdout);
+
+ rexecserv = getservbyname ("exec", "tcp");
+ if (NULL == rexecserv)
+ {
+ fprintf (stderr, "exec/tcp: service not available");
+ exit (1);
+ }
+ if (user != NULL && *user == '\0')
+ user = NULL;
+ tape_fd = rexec (&host, rexecserv->s_port, user, NULL,
+ "/etc/rmt", (int *) NULL);
+ fclose (stdin);
+ fdopen (save_stdin, "r");
+ fclose (stdout);
+ fdopen (save_stdout, "w");
+
+ return tape_fd;
+}
+#endif /* USE_REXEC */
+
+/* Open a magtape device on the system specified in PATH, as the given user.
+ PATH has the form `[user@]system:/dev/????'.
+ If COMPAT is defined, it can also have the form `system[.user]:/dev/????'.
+
+ OFLAG is O_RDONLY, O_WRONLY, etc.
+ MODE is ignored; 0666 is always used.
+
+ If successful, return the remote tape pipe number plus BIAS.
+ On error, return -1. */
+
+int
+__rmt_open (path, oflag, mode, bias)
+ char *path;
+ int oflag;
+ int mode;
+ int bias;
+{
+ int i, rc;
+ char buffer[CMDBUFSIZE]; /* Command buffer. */
+ char system[MAXHOSTLEN]; /* The remote host name. */
+ char device[CMDBUFSIZE]; /* The remote device name. */
+ char login[CMDBUFSIZE]; /* The remote user name. */
+ char *sys, *dev, *user; /* For copying into the above buffers. */
+
+ sys = system;
+ dev = device;
+ user = login;
+
+ /* Find an unused pair of file descriptors. */
+
+ for (i = 0; i < MAXUNIT; i++)
+ if (READ (i) == -1 && WRITE (i) == -1)
+ break;
+
+ if (i == MAXUNIT)
+ {
+ errno = EMFILE;
+ return -1;
+ }
+
+ /* Pull apart the system and device, and optional user.
+ Don't munge the original string. */
+
+ while (*path != '@'
+#ifdef COMPAT
+ && *path != '.'
+#endif
+ && *path != ':')
+ {
+ *sys++ = *path++;
+ }
+ *sys = '\0';
+ path++;
+
+ if (*(path - 1) == '@')
+ {
+ /* Saw user part of user@host. Start over. */
+ strcpy (user, system);
+ sys = system;
+ while (*path != ':')
+ {
+ *sys++ = *path++;
+ }
+ *sys = '\0';
+ path++;
+ }
+#ifdef COMPAT
+ else if (*(path - 1) == '.')
+ {
+ while (*path != ':')
+ {
+ *user++ = *path++;
+ }
+ *user = '\0';
+ path++;
+ }
+#endif
+ else
+ *user = '\0';
+
+ while (*path)
+ {
+ *dev++ = *path++;
+ }
+ *dev = '\0';
+
+#ifdef USE_REXEC
+ /* Execute the remote command using rexec. */
+ READ (i) = WRITE (i) = _rmt_rexec (system, login);
+ if (READ (i) < 0)
+ return -1;
+#else /* !USE_REXEC */
+ /* Set up the pipes for the `rsh' command, and fork. */
+
+ if (pipe (to_rmt[i]) == -1 || pipe (from_rmt[i]) == -1)
+ return -1;
+
+ rc = fork ();
+ if (rc == -1)
+ return -1;
+
+ if (rc == 0)
+ {
+ /* Child. */
+ close (0);
+ dup (to_rmt[i][0]);
+ close (to_rmt[i][0]);
+ close (to_rmt[i][1]);
+
+ close (1);
+ dup (from_rmt[i][1]);
+ close (from_rmt[i][0]);
+ close (from_rmt[i][1]);
+
+ setuid (getuid ());
+ setgid (getgid ());
+
+ if (*login)
+ {
+ execl ("/usr/ucb/rsh", "rsh", system, "-l", login,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bin/remsh", "remsh", system, "-l", login,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bin/rsh", "rsh", system, "-l", login,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bsd/rsh", "rsh", system, "-l", login,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bin/nsh", "nsh", system, "-l", login,
+ "/etc/rmt", (char *) 0);
+ }
+ else
+ {
+ execl ("/usr/ucb/rsh", "rsh", system,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bin/remsh", "remsh", system,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bin/rsh", "rsh", system,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bsd/rsh", "rsh", system,
+ "/etc/rmt", (char *) 0);
+ execl ("/usr/bin/nsh", "nsh", system,
+ "/etc/rmt", (char *) 0);
+ }
+
+ /* Bad problems if we get here. */
+
+ perror ("cannot execute remote shell");
+ _exit (1);
+ }
+
+ /* Parent. */
+ close (to_rmt[i][0]);
+ close (from_rmt[i][1]);
+#endif /* !USE_REXEC */
+
+ /* Attempt to open the tape device. */
+
+ sprintf (buffer, "O%s\n%d\n", device, oflag);
+ if (command (i, buffer) == -1 || status (i) == -1)
+ return -1;
+
+ return i + bias;
+}
+
+/* Close remote tape connection FILDES and shut down.
+ Return 0 if successful, -1 on error. */
+
+int
+__rmt_close (fildes)
+ int fildes;
+{
+ int rc;
+
+ if (command (fildes, "C\n") == -1)
+ return -1;
+
+ rc = status (fildes);
+ _rmt_shutdown (fildes);
+ return rc;
+}
+
+/* Read up to NBYTE bytes into BUF from remote tape connection FILDES.
+ Return the number of bytes read on success, -1 on error. */
+
+int
+__rmt_read (fildes, buf, nbyte)
+ int fildes;
+ char *buf;
+ unsigned int nbyte;
+{
+ int rc, i;
+ char buffer[CMDBUFSIZE];
+
+ sprintf (buffer, "R%d\n", nbyte);
+ if (command (fildes, buffer) == -1 || (rc = status (fildes)) == -1)
+ return -1;
+
+ for (i = 0; i < rc; i += nbyte, buf += nbyte)
+ {
+ nbyte = read (READ (fildes), buf, rc);
+ if (nbyte <= 0)
+ {
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+ }
+ }
+
+ return rc;
+}
+
+/* Write NBYTE bytes from BUF to remote tape connection FILDES.
+ Return the number of bytes written on success, -1 on error. */
+
+int
+__rmt_write (fildes, buf, nbyte)
+ int fildes;
+ char *buf;
+ unsigned int nbyte;
+{
+ char buffer[CMDBUFSIZE];
+ RETSIGTYPE (*pipe_handler) ();
+
+ sprintf (buffer, "W%d\n", nbyte);
+ if (command (fildes, buffer) == -1)
+ return -1;
+
+ pipe_handler = signal (SIGPIPE, SIG_IGN);
+ if (write (WRITE (fildes), buf, nbyte) == nbyte)
+ {
+ signal (SIGPIPE, pipe_handler);
+ return status (fildes);
+ }
+
+ /* Write error. */
+ signal (SIGPIPE, pipe_handler);
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+}
+
+/* Perform an imitation lseek operation on remote tape connection FILDES.
+ Return the new file offset if successful, -1 if on error. */
+
+long
+__rmt_lseek (fildes, offset, whence)
+ int fildes;
+ long offset;
+ int whence;
+{
+ char buffer[CMDBUFSIZE];
+
+ sprintf (buffer, "L%ld\n%d\n", offset, whence);
+ if (command (fildes, buffer) == -1)
+ return -1;
+
+ return status (fildes);
+}
+
+/* Perform a raw tape operation on remote tape connection FILDES.
+ Return the results of the ioctl, or -1 on error. */
+
+#ifndef NO_MTIO
+__rmt_ioctl (fildes, op, arg)
+ int fildes, op;
+ char *arg;
+{
+ char c;
+ int rc, cnt;
+ char buffer[CMDBUFSIZE];
+
+ switch (op)
+ {
+ default:
+ errno = EINVAL;
+ return -1;
+
+ case MTIOCTOP:
+ /* MTIOCTOP is the easy one. Nothing is transfered in binary. */
+ sprintf (buffer, "I%d\n%d\n", ((struct mtop *) arg)->mt_op,
+ ((struct mtop *) arg)->mt_count);
+ if (command (fildes, buffer) == -1)
+ return -1;
+ return status (fildes); /* Return the count. */
+
+ case MTIOCGET:
+ /* Grab the status and read it directly into the structure.
+ This assumes that the status buffer is not padded
+ and that 2 shorts fit in a long without any word
+ alignment problems; i.e., the whole struct is contiguous.
+ NOTE - this is probably NOT a good assumption. */
+
+ if (command (fildes, "S") == -1 || (rc = status (fildes)) == -1)
+ return -1;
+
+ for (; rc > 0; rc -= cnt, arg += cnt)
+ {
+ cnt = read (READ (fildes), arg, rc);
+ if (cnt <= 0)
+ {
+ _rmt_shutdown (fildes);
+ errno = EIO;
+ return -1;
+ }
+ }
+
+ /* Check for byte position. mt_type is a small integer field
+ (normally) so we will check its magnitude. If it is larger than
+ 256, we will assume that the bytes are swapped and go through
+ and reverse all the bytes. */
+
+ if (((struct mtget *) arg)->mt_type < 256)
+ return 0;
+
+ for (cnt = 0; cnt < rc; cnt += 2)
+ {
+ c = arg[cnt];
+ arg[cnt] = arg[cnt + 1];
+ arg[cnt + 1] = c;
+ }
+
+ return 0;
+ }
+}
+#endif /* NO_MTIO */